Spells - ZIM KIDS - Documentation

CLOSE ▲

Frame(scaling, width, height, color, outerColor, ready, assets, path, progress, ticker, rollover, touch, scrollTop, align, valign, canvasID, rollPerSecond, delay, canvasCheck, gpu, gpuObj, nextFrame, nextStage, allowDefault, loadFailObj, sensors, retina, mouseMoveOutside, captureMouse, shim, maxConnections, maxNum, singleTouch)

Frame zim class - extends a createjs EventDispatcher DESCRIPTION Frame creates a canvas and stage. Frame lets you decide how you want your stage to scale. It also provides events for ready, resizing and orientation change as well as a way to remake the canvas if necessary. Frame handles loading Bitmap, Sound, etc. assets by wrapping PreloadJS See https://zimjs.com/frame.html for sample templates using Frame. The first frame made is called the zimDefaultFrame - or zdf. It will also have the default stage for addTo(), center(), etc. Use setDefault() on another frame to change the default frame. As of ZIM ZIM 01, ZIM will make F, S, W, H global variables that reference the zimDefaultFrame, its stage and the stage width and height. The width and height will be updated in FULL mode if the window size changes. ZIM ASSET TOOL See https://zimjs.com/assetlist/ Optionally use this tool to prepare an array of assets from a folder. CANVAS ALTERNATIVE CONTENT Frame will move any tag with an id of canvasIDAlternative into the canvas tag. By default, the canvasID is "myCanvas" so use an id of "myCanvasAlternative". This allows you to show content for non-canvas browsers. The content may also be indexed by search engines - one would hope and is read by screen readers (see also ZIM Accessibility). NOTE addTo(), center(), centerReg(), loc(), pos(), new Ticker.add() default to the stage of the first frame made use the setDefault() method to set a frame to the default frame NOTE here are some tips that relate to Frame: https://zimjs.com/tips#FRAME https://zimjs.com/tips#IMAGES https://zimjs.com/tips#SOUND https://zimjs.com/tips#FULLSCREEN NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// load assets such as images right in Frame call using a url
// put multiple assets in an array - see assets parameter for options
// the path and progress are optional

new Frame(FIT, 1024, 768, "#ddd", "#333", ready, "image.png", "assets/", new Waiter());
function ready() {

   new Pic("image.png").center(); // formerly had used asset("image.png").center();

} // end ready

EXAMPLE

// load assets on-demand inside ready event

new Frame(FIT, 1024, 768, dark, light, ready);
function ready() {

   // code here - or optionally load assets

   F.loadAssets("image.png");
   F.on("complete", ()=>{

      // app code goes here if waiting for assets
      var image = new Pic("image.png");
      image.center();
      S.update();

   }); // end asset complete

   // OR for multiple assets in an assets folder:

   F.loadAssets(["sound.mp3", "spriteData.json", "spriteImage.png"], "assets/");
   F.on("complete", ()=>{

      // app code goes here if waiting for assets
      const soundInstance = new Aud("sound.mp3").play(); // formerly asset("sound.mp3").play()
      // later soundInstance.paused = true; // etc.

      const sprite = new Sprite({json:"spriteData.json"});
      sprite.center().run(2);
      // the image for the sprite is specified in the JSON
      // but we still want to load it so it is in the loadAssets()
      // and the JSON data will take care of adding it to the sprite

      S.update();

   }); // end asset complete

} // end of ready

EXAMPLE

// lazy-load image - added in ZIM Cat
// this means that the asset is not passed into the Frame in the assets parameter
// and it is not added with loadAssets() but rather just called with asset().

new Frame(FIT, 1024, 768, dark, light, ready); // no assets parameter
function ready() {
   
   // lazy-loading will make a container with type "AC" (Asset Container)
   // it will store requested transform information
   // such as that the container is supposed to be centered in this case
   // (remember, the dimensions are unknown until the Bitmap is loaded)
   // then call loadAssets() behind the scene
   // and add the Bitmap to the container
   // if loading is successful, it will rename the type to "Image"
   // then it will use the dimensions to center the container
   
   new Pic("image.jpg").center(); // formerly asset("image.jpg")
   
   // there are many things that can be done to an object
   // that need dimensions - ZIM tries to handle these
   // but if there is something obscure like gesture bounds
   // that ZIM may have missed then use conventional loading
   // or try loading with dimensions provided:
   
   new Pic("image.jpg", 100, 200).center();
   
   // NOTE: do not lazy-load Sprite images.
}

EXAMPLE

   // With multiple loadAsset() calls you can assign the results to a variable
   // and use that variable for the events independently
   // Warning, each of these will still call a frame complete event
   // so usually you would use one or the other but not both

   const first = F.loadAssets("image.png");
   first.on("complete", ()=>{
      const image = new Pic("image.png").center();
      S.update();
   });

   const second = F.loadAssets("sound.mp3");
   second.on("complete", ()=>{
      const sound = new Aud("sound.mp3").play();
   });

EXAMPLE

// if app is in an iFrame, this will get keyboardAccess using a hidden F.keyboardMessage()
// good for games that need keyboard if the game is in an iFrame like the Editor or CodePen
new Pane({content:"START", keyboardAccess:true}).show();

EXAMPLE

// dynamically adjusting touch - there are also touch and singleTouch parameters of Frame
// also, drag() has its own singleTouch parameter
const radio = new RadioButtons(30, ["MULTI TOUCH", "SINGLE TOUCH", "NO TOUCH"]).center().mov(0,-200).change(()=>{
   if (radio.text.includes("MULTI")) F.singleTouch = false;
   else if (radio.text.includes("SINGLE")) F.singleTouch = true;
   else F.touch = false;
});
new Circle(50,white,red,5).center().mov(-100,50).drag();
new Circle(50,white,purple,5).center().mov(100,50).drag();

PARAMETERS supports DUO - parameters or single object with properties below scaling - (default FULL) can have values as follows Note: as of ZIM Cat 04, the constant FIT or the string "fit", etc. can be used FIT sets canvas and stage to dimensions and scales to fit inside window size FILL sets canvas and stage to dimensions and scales to fill window size (previously "outside") FULL sets stage to window size with no scaling "tagID" add canvas to HTML tag of ID - set to dimensions if provided - no scaling FIT and FILL: width and height will set the stage width and height and the canvas is then scaled this is handy because all your dimensions are set to start FULL: width and height are ignored when scaling as these are set to the window width and height TAG: if width and height are provided then the canvas and stage will be these dimensions if width and height are not provided in tag mode, the canvas and stage will take the dimensions of the tag this means, the tag must have some sort of width and height dimensions set or it will be really big! In this mode, you may need to style the containing tag with CSS to get a desired effect. width - (default 1024 except for full**) the width of the stage height - (default 768 except for full**) the height of the stage ** if tag mode and no width or height then these will be the width and height of the tag color - (default null) the background color of the frame (any CSS value) - or just set in styles will be see-through if not specified outerColor - (default null) the body color of the HTML page - null will not adjust the background color ready - (default null) - an callback function for when the Frame is ready - rather than using the "ready" event this will be passed frame specific (frame, stage, width, height, mobile) parameters the stage is updated after this function is called assets - (default null) - 1. a string asset or 2. an array of assets, 3. ZIM asset object, 4. ZIM multi-asset object 1. "logo.png" 2. ["logo.png", "bounce.mp3", "Reuben.otf"] 3. {id:"string", src:"logo.png", path:"assets/", loadTimeout:2, noCORSonImage:true} 4. [{assets:["one.png", "two.png"], path:"images/"}, {assets:["big.mp3", "oof.mp3"], path:"sounds/"}] ** see the loadAssets() method for details - including more file types, etc. NOTE: "complete", "progress" and "fileLoaded" events are not dispatched use loadAssets() for these if desired the "ready" event will be dispatched when the canvas is ready and initial assets are loaded NOTE: the loadAssets() method can still be used as desired NOTE: as of ZIM Cat 04, SVG will be automatically converted to a Bitmap with and svg property of the original SVG. SEE: https://zimjs.com/assetlist/ for many files path - (default null) - a string path for the assets if an assets object is provide with a path then this parameter is ignored this will also set the ZIM PATH global to the path ZIM PATH is used with lazy-loaded images (eg. when not using Frame assets parameter or loadAssets() method) ticker - (default null) - an optional callback function to be added to the ZIM Ticker - rather than using Ticker.add(); this will be passed frame specific (count, frame, stage, width, height) parameters count starts at 1 and the stage is updated after this function is called also see the pauseTicker() method progress - (default null) - set to a Waiter() or ProgressBar() object to show while loading rollover - (default true or false on mobile) activates rollovers touch - (default true) activates touch on mobile - this will be multitouch by default set to false for no touch on mobile also see singleTouch parameter to set singleTouch also see touch and singleTouch properties scrollTop - (default false) activates scrolling on older apple devices to hide the url bar align - (default CENTER) for FIT and FILL, the horizontal alignment LEFT, CENTER, RIGHT valign - (default CENTER) for FIT and FILL, the vertical alignment TOP, CENTER, BOTTOM canvasID - (default "myCanvas" or if subsequent frame, myCanvas+randomID) will be set to tagIDCanvas if a tagID is provided - eg. scaling="test", canvasID="testCanvas" rollPerSecond - (default 20) times per second rollover is activated (if rollover parameter is true) delay - (default .03 and 1 for mobile) seconds to resize at load and after orientation change (also see ZIM TIME constant) some devices are slow to report true width and height At loading, mobile will be tested right away and then at .1 seconds the default is to then test again at the delay (default 1 second) At resize, mobile will be tested every .05 seconds up to the delay set this to some other time if desired if set to 0 then no additional test will be done - not even the one at .03 seconds canvasCheck - (default true) check to see if there is canvas support - uses !!window.HTMLCanvasElement gpu - (default false) set to true to use a CreateJS StageGL stage for GPU renderer note: retina will be turned off if gpu is on otherwise antialiasing really looks bad See: https://blog.createjs.com/stagegl-faster-better-stronger-webgl-update-easeljs/ (written before version 1 release) gpuObj - (default null) object with following properties (with defaults) See CreateJS docs on GITHUB: preserveBuffer (false), antialias (false), transparent (false), premultiply (false), autoPurge (1200) nextFrame - (default null) set to zim Frame object of Frame underneath current Frame to pass events to nextFrame nextStage - (default null) alternative to nextFrame if the stage beneath current Frame is not a ZIM Frame but just a CreateJS Stage allowDefault - (default false - true for tag mode) set to true to allow default mouse, key and scrollwheel events on canvas See also the zil property of frame that allows you to add and remove these events dynamically (except for mouse swipe scroll and zoom on mobile) allowDefault of false also sets body overflow to hidden - which is good for full, fit and fill modes also see allowDefault property loadFailObj - (default result of F.makeCircles) object that shows if asset() does not exist or did not load withing loadTimeout This will be given a type property of "EmptyAsset" Set the loadFailObj property below to null to set no object - but this will yield errors unless each resulting asset() is tested Set to new Container() to show nothing (but avoid errors) - or new Rectangle(10, 10) to show little black square, etc. sensors - (default false) set to true to capture Frame devicemotion and deviceorientation events - see Events retina - (default true) scales stage to use pixelDensity (sharper when scaling up) and supports Adobe Animate export may need to set mouse event targets to e.stageX/zim.scaX and e.stageY.zim.scaY except for using S.getObjectUnderPoint() ZIM overrides CreateJS localToGlobal, globalToLocal and localToLocal to accomodate stage scaling This was a major adjustment to transform(), bezier controls, outline, physics, etc. set to false to return to traditional PRE ZIM 10.3.0 unscaled stage mouseMoveOutside - (default false) set to true to capture mouse movement outside the stage see also mouseX and mouseY properties of frame - these work with ZIM retina without adjusting for stage scale captureMouse - (default true) set to false to not use stagemousemove event to set F.mouseX and F.mouseY (good with Retina) shim - (default null) used by ZIM SHIM 2 https://zimjs.com/animate/ to create Frame with pre-existing stage and canvas accepts an object with stage and canvas properties - lets Adobe handle resize maxConnections - (default 10) set the maximum number of concurrent connections. From CreateJS PreloadJS: Note that browsers and servers may have a built-in maximum number of open connections, so any additional connections may remain in a pending state until the browser opens the connection. maxNum - for sound this is how many instances of the sound can play at once also can set in asset object maxNum property and loadAssets() and asset() maxNum parameters. also see sound interrupt parameter singleTouch - set to true for single touch rather than the default multitouch (or touch false) this will override the touch setting to turn touch to true also see touch and singleTouch properties METHODS loadAssets(assets, path, progress, xhr, time, loadTimeout, outputAudioSprite, crossOrigin, fileType, queueOnly, maxConnections, maxNum) |ZIM DUO| also accepts ZIM DUO configuration object as single parameter // see also assets and path parameters of Frame - which share the info below // see https://zimjs.com/assetlist/ to get an array of many files assets - a file (url String, asset object or multi-asset object) or files in an Array each asset String is how you then access the asset with the asset() method of Frame asset types (from CreateJS PreloadJS): Image, Font, JSON, Sound, SVG, Text, XML NOTE: as of ZIM ZIM 02, fonts can be loaded with just the font file name (including Google Fonts) rather than a ZIM font object - see FONTS in the Docs. NOTE: as of ZIM Cat 04, SVG will be automatically converted to a Bitmap with and svg property of the original SVG. asset can also be a ZIM asset object: {id:"string", src:"filename", path:"dir/", loadTimeout:1, maxNum:num, noCORSonImage:true} then can use the id to access the asset in the asset() method of Frame filename will be added to an overall path if a path parameter is provided or overwritten with a local path if a path property is provided an asset object with a filename of an absolute filename starting with http will ignore path loadTimeout (default 8) will override the loadAssets() loadTimeout this is how many seconds to wait for asset before error and a complete fires even though asset not loaded maxNum (browser default) is used with sound to specify the maximum number of sounds of the same source to play at one time this can be used with the interrupt parameter of the play() method to ignore multiple sounds or start the sound over again instead of playing multiple versions noCORSonImage (default false) set to true to make an HTML img tag and read it into a ZIM Bitmap to avoid CORS testing it then uses ZIM expand(0) to add a CreateJS hitArea to the Bitmap allowing it to be interactive and avoid CORS thanks Disco for the technique note: this means the Bitmap will be interactive everywhere - not just in opaque areas note: loading images this way will not count as progress (bytes loaded ratio) in the progress event but do count for fileloaded and complete events asset can be a ZIM multi-asset object {assets:[], path:"dir/", loadTimeout:1, maxNum:num, noCORSonImage:true} where the array can hold multiple files that will have the provided properties applied this is handy for loading assets from multiple directories (added in ZIM Cat 02 - thanks Netanela for the prompting) eg. [ {assets:["one.png", "two.png"], path:"images/"}, {assets:["big.mp3", "oof.mp3"], path:"sounds/"} ] ** warning - if an asset has the same name as a previous asset, then the later asset id will have the path added to its id ** for example: [ {assets:["one.png", "two.png"], path:"images/"}, {assets:["one.png", "man.png"], path:"portraits/"} ] ** then asset("one.png") will be the asset in the images folder ** and asset("portraits/one.png") will be the asset in the portraits folder asset can also be a font object - but as of ZIM ZIM 02, fonts can be loaded with just the file name, including Google Fonts DO NOT use uppercase letters on mobile apps {font:name, src:url, type:string, weight:string, style:string} // with last three properties being optional eg. {font: "wildwood", src:"ChurchintheWildwood-Regular.ttf", type:"OpenType"} // type is not needed {font: "regu", src:"regul-bold.woff", weight:"bold"} {src:"https://fonts.googleapis.com/css?family=Roboto"} For google fonts https://fonts.google.com/ you add extra information to the url so the font (family), type, weight and style are ignored If absolute src is used, path parameter is ignored - otherwise path is added to start of src After loading, can just use: var label = new Label("hello", 30, "wildwood") // or whatever the font property is asset can be an AudioSprite - which is a single sound file and data for sounds within the sound file: ZIM has a format for the data and so does CreateJS - there is also the parseAudioSprite() method for importing formats See the parseAudioSound parameter to pre-parse the ZIM format then use the resulting CreateJS format to avoid live parsing (maybe save a millisecond) ZIM FORMAT: {src:"audiosprite.mp3", audioSprite:[ // [id, startime(s), endtime(s)] // prefer this when making audioSprites by hand in Premiere or Audition ['blackball', 1.041, 2.475], ['bounce', 3.567, 4.232] ]} CREATEJS FORMAT: {src: "audiosprite.mp3", data:{ // extra data property audioSprite: [ {id:"sound1", startTime:0, duration:500}, // time in ms {id:"sound2", startTime:1000, duration:400}, {id:"sound3", startTime:1700, duration: 1000} ] }} See also previewAudioSprite() method in the META section of docs. path - pass in an optional path String that gets prepended to the asset when accessing the asset with the asset() method you do NOT include the path assets with an absolute URL (http[s]://etc.) will ignore path this will also set the ZIM PATH global to the path ZIM PATH is used with lazy-loaded images (eg. when not using Frame assets parameter or loadAssets() method) progress - (default null) - set to a Waiter() or ProgressBar() object to show while loading xhr (default true) the loading method for files - perhaps will need to set to false in some cases (WEBP alternative from Cloudflare, etc.) time (default 0) is the minimum number of seconds for the complete event to trigger use this for testing or to always have time to show a loading message loadTimeout (default 8) is how many seconds to wait for asset before error and a complete fires even though asset not loaded outputAudioSprite (default false) set to true when passing in a ZIM AudioSprite format to output to the console a CreateJS AudioSprite JSON object JSON.parse() this object before passing in to loadAssets() - and add single quotes around console output as those are stripped by console crossOrigin (default "anonymous") - leave at default to load from Amazon S3, etc. had to add <AllowedMethod>HEAD</AllowedMethod> in CORSRule of CORS configuration on Amazon S3 for fonts https://docs.aws.amazon.com/AmazonS3/latest/dev/cors.html#how-do-i-enable-cors https://docs.aws.amazon.com/AmazonCloudFront/latest/DeveloperGuide/header-caching.html#header-caching-web-cors and had to edit distribution behaviours for cache header > whitelist and move over Origin NOTE: this will still not get past CORS if there is no CORS provided see noCORSonImage property of ZIM asset object for an image solution to bypass CORS fileType (default null) in cases where the file type cannot be parsed or is parsed incorrectly, this overrides might have to split up loading as this fileType gets applied to all files loaded Types are for CreateJS PreloadJS: https://www.createjs.com/docs/preloadjs/classes/LoadQueue.html createjs.Types.BINARY: Raw binary data via XHR createjs.Types.CSS: CSS files createjs.Types.IMAGE: Common image formats createjs.Types.JAVASCRIPT: JavaScript files createjs.Types.JSON: JSON data createjs.Types.JSONP: JSON files cross-domain createjs.Types.MANIFEST: A list of files to load in JSON format, see AbstractLoader/loadManifest createjs.Types.SOUND: Audio file formats createjs.Types.SPRITESHEET: JSON SpriteSheet definitions. This will also load sub-images, and provide a SpriteSheet instance. createjs.Types.SVG: SVG files createjs.Types.TEXT: Text files - XHR only createjs.Types.VIDEO: Video objects createjs.Types.XML: XML data queueOnly (default false) - set to true to send events only to the Queue object (see below) rather than the Frame when using queues to accept events, remember that the frame also receives events if you also have some general frame events for loading, set this parameter to true to avoid accident maxConnections - (default the Frame maxConnections) set the maximum number of concurrent connections. From CreateJS PreloadJS: Note that browsers and servers may have a built-in maximum number of open connections, so any additional connections may remain in a pending state until the browser opens the connection. maxNum - for sound this is how many instances of the sound can play at once also see sound play() interrupt parameter RETURNS: a Queue object that can be used for control with multiple loadAssets calls Each Queue will trigger progress, assetload and complete events Each Queue will have a preload property to the CreateJS LoadQueue and an isLoading property The frame also has these events and properties but acts for all loading - so be careful - see the queueOnly parameter It is recommended to use the Queue any time you use multiple LoadAssets() calls at the same time You still access assets with asset() as outlined below whether you use the Queue or not asset(file, width, height, maxNum) - access an asset such as an image or sound - see loadAssets() for more on types file is the string name or url to the file if the asset was loaded with a string then use the string (less the path if provided) if the asset was loaded with a full URL then use the full URL here if the asset uses an asset object with an id then use the id file can be a |ZIM VEE| value so for instance, an array and asset will pick randomly - or a series, etc. ** warning, if the assets are loaded with ZIM Multi-asset Objects with assets and path ** and an asset has the same name as a previous asset, then the later asset id will have the path added to its id width and height will help the auto-loading (lazy-loading) otherwise, ZIM will recall positioning applied before the asset is loaded ** otherwise there is no need to add a width and height - only do so to optionally help auto-loading maxNum - for sound this is how many instances of the sound can play at once - also see sound play() interrupt parameter ** asset() is available as a global function asset() or if zns (ZIM name space) is true then as zim.asset() ** if there are two or more frames, then use F.asset() not asset() ** traditionally, these have been preloaded into the Frame asset parameter or with Frame loadAssets() ** As of ZIM Cat, using asset() without preloading will automatically load the asset - thanks Ami Hanya for suggestion this works only for images and sound and should be used sparingly as each asset has its own preloading and some things like sprite assets may have issues. ** As of ZIM ZIM, there is a ZIM PATH constant that can be used to set the path for automatic loading (lazy-loading) see the docs under ZIM PATH for details ** asset() will add "complete" and "assetLoad" event to the asset object if the asset is an image then this is a Bitmap which can be added to the stage, etc. if the asset is a sound then use asset(file).play(); play has ZIM DUO params of volume, loop, loopCount, pan, offset, delay, interrupt see the ZIM Docs on Sound (below the Frame) for param information if the asset is anything else, then it is what it is! asset() will have a type property depending on what type (except JSON, XML and text which are just the object itself) for instance, an image will have type "Bitmap" as it is a ZIM Bitmap object but a lazy-loaded image will have type "Image" as it is actually a Container holding a Bitmap and its Bitmap can be accessed with the bitmap property - so asset("auto.png").bitmap will access the Bitmap a lazy-loaded sound will have type "Sound" asset.getIDs() will return an array of asset IDs. zim.assets is an object literal that holds all the assets based on ID consider this to be read only this is the object that the asset() function calls so usually just use asset() object(name) - get a DisplayObject (for example a Circle or Button) by its name. ** object() is available as a global function object() or if zns (ZIM name space) is true then as zim.object() DisplayObjects do not start with a name but can be named if desired. Usually, we use variable names to reference an object See the DisplayObject name property and the nam() short chainable method to set a name object.getNames() will return an array of object names that have been set. any object that is named the same name as another object will overwrite the other object and will not be in the object() list anymore follow(obj, boundary, damp, dampY, leftOffset, rightOffset, upOffset, downOffset, offsetDamp, offsetDampY, horizontal, vertical, borderLock, lag) |ZIM DUO| moves obj container to keep provided object in middle of stage view pass in null for obj to stop following See https://zimjs.com/ten/follow.html - with keys See https://codepen.io/danzen/pen/gNKQYY - with press ** supports DUO - parameters or single object with properties below obj - the Display Object to follow - works well if controlling obj with ZIM Motion Controller (mousedown, keydown, gamebutton, gamestick) unlike Physics follow() the obj for Frame follow() must be in a container - the container will be moved boundary - (default stage size) - or use a ZIM Boundary() object to specify x, y, width and height to keep obj inside see also followBoundary property of Frame to update this boundary in a frame "resize" event function when frame is in "full" scaling mode damp - (default .05) the damping of the motion - 1 moves faster, 0 not at all dampY - (default damp) can set to damp vertical movement at a separate rate leftOffset - (default 0 from left of boundary) rightOffset - (default 0 from right of boundary) - differs from Physics follow which is distance from 0 to right offset the object will try and move to leftOffset when moving right and rightOffset when moving left this counters the damping so that the user can see in the direction of motion when the object is not being controled it moves to the average between left and right offsets upOffSet - (default 0 from top of boundary) downOffSet - (default 0 from bottom of boundary) same as offsets above but in the y direction offsetDamp - (default .02) the damping for moving the object to the offset offsetDampY - (default offsetDamp) - damping for moving the object to the y offset if desired to be different than x horizontal - (default true) set to false to not follow horizontally vertical - (default true) set to false to not follow vertically borderLock - (default false) set to true to stop container at boundary lag - (default false) set to true to position object back from direction of motion this gives more view as moving but sort of goes in two directions when motion stops setDefault() - sets the frame to be the default frame by default ;=) the default frame is the first frame made the default frame has the stage that addTo(), center(), etc. will use as the default container a global varible called zdf is also available as of ZIM ZIM 01, global variables F, S, W, H are provided for frame, stage, width and height of the default frame keyboardMessage(color, backgroundColor, message, response, percent, call) |ZIM DUO| - place a message to press screen for keyboard control works with iFrames as well to avoid having to press outside the canvas on the iframe it does this by turning off the canvas pointer events until the iframe is pressed color defaults to yellow, backgroundColor to black response is the message given when the stage or iframe has been pressed to activate the keyboard pass in "" for no message and response - to use a custom Pane() for example. percent defaults to 80% the stage width call - the function to call when keyboard is active - or see keyboardactive event returns the label if repositioning is desired Dispatches a "keyboardactive" event when pressed to activate keyboard fullscreen(mode) - set Frame to HTML fullscreen - mode defaults to true - set to false to come out of fullscreen also see isFullscreen property and two fullscreen events note: this is nothing to do with "full" scaling mode but rather the Browser window F11 fullscreen see: https://zimjs.com/expand to go from ZIM "tag" scaling mode to ZIM "fit" scaling mode makeCat(height) - returns a ZIM Cat icon - provide height rather than scaling for better caching if cached if mobile, the icon will be cached - can uncache() it if desired makeIcon(edges, box, slats, borderColor, borderWidth) |ZIM DUO| - returns a ZIM Z icon edges defaults to zim.light and is the top and bottom line in the Z box defaults to zim.dark and is the background box color slats defaults to the ZIM colors but can be set to any array of five colors (setting true will set to zim.silver) borderColor and borderWidth default to null - or borderWidth 1 if color set and borderColor black if borderWidth set madeWith(color, text, edges, box, slats, borderColor, borderWidth) |ZIM DUO| - returns a ZIM Z icon with Made With message color - (default zim.dark) change color of text (pass in clear to hide text) text - (default: "Made with ZIM") change to desired made with message other parameters see makeIcon() above makeCircles(radius, multiple) - returns ZIM Circles (centered reg) radius defaults to 100 multiple defaults to false which will return a ZIM Shape - set to true to return a ZIM Container of ZIM Circles remakeCanvas(width, height) - removes old canvas and makes a new one and a new stage will have to set your local stage, W and H variables again update() - call this if frame position is moved on the HTML page for instance, when a div to left has its display style set to none and the frame shifts over calling update() will dispatch an update event to any TextArea, Loader or Tag objects so they resize properly with the new F.x and F.y values dispose() - removes canvas, resize listener and stage PROPERTIES type - holds the class name as a String stage - read only reference to the zim Stage - to change run remakeCanvas() frame gives the stage read only S.width and S.height properties frame gives the stage a frame property that points to the frame that made the stage canvas - a reference to the frame's canvas tag canvasID - a reference to the frame's canvas ID color - the color of the frame background - any css color outerColor - the color of the body of the HTML page - set with styles scaling - holds the scaling mode - FULL, FIT, FILL (or "full", "fit", "fill"), "tag" or "inline" tag is tag mode with no dimensions and inline is tag mode with dimensions also see the tag property below if mode is tag or inline tag - the containing tag if scaling is set to an HTML tag id (else null) isDefault - a Boolean to indicate whether the Frame is the default frame (see setDefault() method) the default frame has the stage that addTo(), center(), etc. will use as the default container a global varible called zdf is also available isLoading - a Boolean to indicate whether loadAssets() is currently loading assets (also, each queue has an isLoading property) isFullscreen - a Boolean to indicate if Frame is in HTML fullscreen mode - see fullscreen() method and events width - read only reference to the stage width - to change run remakeCanvas() height - read only reference to the stage height - to change run remakeCanvas() scale - read only returns the scale of the canvas - will return 1 for full and tag scale modes mouseX, mouseY - read only value of the mouse x and y positions on the canvas note: the frame captureMouse parameter must be set to true (default) note: this value includes the division by the stage scale needed for ZIM Retina whereas getting the mouse coordinates from a mouse event object does not include division by the stage scale set frame's mouseMoveOutside parameter to true to capture movement outside the canvas cursors - get or set an object literal with custom cursors to override the CSS cursors or act on their own See: https://zimjs.com/014/cursors.html the format is: F.cursors = {default:DisplayObject, pointer:DisplayObject, madeUp:DisplayObject, etc.} NOTE: use the cur() method to set cursors - DO NOT use the cursor property to set cursors drag(), tap(), etc. will already work with the custom cursor system set F.cursors = null to turn off custom cursors cursorsExclude - object or [objects] not to get custom cursors NOTE: the cur() must be set on the object for the exclude to work if the cur() is set on an object inside a container then the exclude must be set manually (after F.cursor is set) innerObject.cursor = "default"; // or "pointer", etc. innerObject._cursor = null; // clear custom cursor flag cursorObj - the current custom cursor object cursorList - a Dictionary that holds data for cursors - used internally to keep track of custom cursors cursorTypes - an array of valid CSS cursors - used internally to watch for invalid CSS cursors if name used is not in cursors leftMouseDown - read only value as to whether the left mouse button is down used internally by drag and others to make sure pressup on iFrames is handled when the mouse comes back on the stage also see "mouseupplus" event mousedownEvent - a reference to the frame "stagemousedown" event - can set F.off("stagemousedown", F.mousedownEvent) mousemoveEvent - a reference to the frame "stagemousemove" event - can set F.off("stagemousemove", F.mousemoveEvent) orientation - VERTICAL or HORIZONTAL (updated live with orientation change) visibleLeft, visibleTop, visibleRight, visibleBottom - in "fill" scale mode these give window edge locations relative to the stage can be used to position items like navigation relative to window as the frame resize event is fired in all scale modes other than "fill", the values are 0, W, 0, H zil - reference to zil events that stop canvas from shifting or scrolling - also see allowDefault parameter can set allowDefault property to false then allow specific defaults by removing zil events - see zil global function example: window.removeEventListener("keydown", F.zil[0]); removes keydown preventions (for page up, page down, home, end, etc) allowDefault - set to true to remove zil or false to set zil (see above) also affects body overflow touch - get or set the touch setting - setting to false will not allow touch on mobile also see touch and singleTouch parameters and singleTouch property singleTouch - get or set the singleTouch setting - set to true to turn on single touch and false to turn on multitouch setting either true or false will set the touch property to true also see the touch and singleTouch parameters and touch property followBoundary - update with a ZIM Boundary for follow() if "full" mode Frame "resize" event happens, etc. altKey - true if the alt key is being pressed otherwise false ctrlKey - true if the ctrl key is being pressed otherwise false metaKey - true if the meta key (âŒ˜ command on Mac or âŠž windows key) is being pressed otherwise false shiftKey - true if the shift key is being pressed otherwise false loadFailObj - the object that shows if images are broken - will be given a type property of "EmptyAsset" startTime - datestamp of when frame was made - used internally retina - read-only Boolean as to whether stage (as opposed to the canvas) was scaled for pixelDensity during Frame creation reloaded - read-only Boolean as to whether page has been reloaded - uses window.performance.getEntriesByType ALSO see F, S, W, H, M global variables which reference the default frame, its stage and width and height, and if on mobile EVENTS "ready" - fired when the stage is made (and state update will be called after dispatched) - also see ready parameter "failed" - fired if no canvas support (and canvasCheck parameter is set to true - which is the default) "resize" - fired on resize of screen "update" - fired when F.update() is called - read by Loader, TextArea and Tag objects note: this is for when the frame is moved within an html page for instance, when a div to the left has its display set to none - then call F.update(); "orientation" - fired on orientation change "contextmenu" - fired on right click to prevent the default right click then use e.preventDefault() in your event function. see https://zimjs.com/explore/contextmenu.html "keydown" - fired on keydown - just like the window keydown event with eventObject.keyCode, etc. also stores F.altKey, F.ctrlKey, F.metaKey, F.shiftKey Note: Alt ArrowLeft and Alt ArrowRight has been set to go back or forward in the browser history "keyup" - fired on keyup - just like the window keyup event with eventObject.keyCode, etc. "pointerdown", "pointermove", "pointerup", "pointerenter", "pointerleave" - mirrors DOM Pointer Events Note: the event object is a raw JavaScript event object, not a CreateJS event object so there is no clear() on the event object nor a once parameter for the on() method, instead use: const ev = F.on("pointerdown", ()=>{ F.off("pointerdown", ev); // this will only run once }); "mouseupplus" - fired when the browser window receives a mouseup event NOTE: deprecated - would suggest using pointerup instead of this also fired when the mouse enters the stage from an iFrame and is no longer down. Note there is no eventObject. ALSO see mouseupplusonly for only firing as mouse enters the stage from an iFrame and is no longer down. mouseup, pressup, stagemouseup, etc. do not work when the mouse is up over an iframe or outside an iframe ZIM drag() makes use of this event to stop the drag if the mouse was up over an iframe or outside the an iframe holding the canvas. This could have been done with setting events on parent windows but this runs into CORS errors in many cases This event fires on the bubbling phase so can be ignored if a real press up is in place - for instance: record a check variable as true when mousedown and false when pressup which also calls an up function. In a mouseupplus event function, activate the up function only if the check variable is still true. This will call the up function as the mouse comes back onto the stage if the mouse was down when leaving the stage and let up outside the iframe the canvas is in - goodness. "mouseuplusonly" - fired when the mouse comes back from an iframe (not holding the canvas) NOTE: deprecated - would suggest using pointerup instead of this and the mouse was down on the canvas and up in the iframe. this does not fire on a regular mouseup whereas the mouseupplus will. "wheel" - fired on mousewheel (Window wheel event) can get eventObject.deltaX and eventObject.deltaY these vary greatly in value based on Browser may want to just ask for sign(eventObject.deltaY) and multiply it by a factor and then perhaps constrain the value - here the scale is constrained between .5 and 5 note - when changing scale, it is better to multiply by a factor rather than add to the scale eg. circle.scale = constrain(circle.scale*(sign(e.deltaY)>0?.75:1.25), .5, 5); "deviceorientation" - MUST SET Frame sensors parameter to true fired as device orientation changes: eventObject.rotation.x (beta in HTML specs) holds rotation about the x axis between -180 and 180 (tipped forward or backward) eventObject.rotation.y (gamma in HTML specs) holds rotation about the y axis between -90 and 90 (tipped left or right) eventObject.rotation.z (alpha in HTML specs) holds rotation about the z axis 0-360 clockwise (relative to orientation when app loads) note rotation.z is 360-alpha compared to the HTML 5 specs note also that beta, gamma and alpha from the HTML 5 specs are also provided eg. var label = new Label().center(); F.on("deviceorientation", function(e) { label.text = e.rotation.x +","+ e.rotation.y +","+ e.rotation.z; S.update(); }); "devicemotion" - MUST SET Frame sensors parameter to true fired on moving mobile device - like a tilt or shake - eventObject.acceleration holds x, y and z properties of motion eg. var label = new Label().center(); F.on("devicemotion", function(e) { label.text = e.acceleration.x +","+ e.acceleration.y +","+ e.acceleration.z; S.update(); }); "fullscreenenter" - dispatched going into fullscreen - see fullscreen() method "fullscreenexit" - dispatched if coming out of fullscreen - see fullscreen(false) method "tabfocus" - dispatched when tab gains focus - only dispatched by the zdf (ZIM Default Frame) ZIM setBlurDetect() is now activated by Frame and used by ZIM in animate(), timeout(), interval(), wiggle() "tabblur" - dispatched when tab loses focus - only dispatched by the zdf (ZIM Default Frame) "keyboardactive" - dispatched if keyboardMessage() is called and keyboard is active ASSET EVENTS loadAssets() will trigger these events on the Frame object and on the specific queue (eg. var queue = F.loadAssets();) NOTE if loadAssets() queueOnly parameter is true, then only the queue receives the events - see queueOnly parameter "progress" - fires constantly as assets are loaded with loadAssets() to represent overall load progress (fonts not included) The event object has a progress property between 0 and 1 "assetload" - fired when an asset loaded with loadAssets() or asset() has loaded (use asset property of event object to get its file and src) (fonts not included) "complete" - fired when all assets loaded with loadAssets() or asset() are loaded "error" - fired when there is a problem loading an asset with loadAssets() If the assets are loaded in the Frame then the error event must be captured outside the ready event and if loadAssets() or lazy-load with asset() are used then the error event must be captured outside the complete event CLOSE ▲PAGE ▤CODE ▤TOUR😊BITS

VIDS

CLOSE ▲

Pic(file, width, height, noCors, style, group, inherit)

Pic zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION Use Pic() to show an image, such as a jpg, png, webp, etc. There may be a security error when loading images locally for any Canvas app. Please read https://zimjs.com/tips.html#IMAGES for easy solutions. Before ZIM version ZIM 00, asset() or F.asset() was used to show images. These can still be used if desired. The Pic() class just wraps the asset() call. SEE: https://zimjs.com/zim/assets.html PRELOADING It is recommended that you preload images (along with sounds, etc.) using the Frame() assets and path parameters. Batch loading images is more efficient and the width and height will be available when the Frame() is "ready" or loadAssets() is "complete". Images can also be loaded on demand with F.loadAssets() at any time - for instance, for a second section of the app. LAZY-LOADING If images are not preloaded then Pic() will use automatic loading (lazy-loading). If width and height are provided, all will go smoothly. If width and height are not provided, ZIM will store various scaling and positioning commands and re-apply the commands once the images are loaded. This happens for center(), centerReg(), pos(), scaleTo(), outline() and perhaps others. This extra work is NOT required if assets are preloaded or a width and height are provided. Some controls like Tile() and Scroller() must have dimensions and will give a warning in the console. In the past there has been issues with cloning lazy-loaded images before they are loaded, but this should work now. Pic will give a "ready" and a "complete" event when loaded. These events are triggered 20 ms after making the object if the object is already preloaded. NOTE Pic is a container with a bitmap inside (see bitmap property). This means that other objects can be added to the Pic object. This is like the ZIM Shapes (Rectangle, Circle, etc.) which are containers and can have objects added to them. If doing this, note that the container has its mouseChildren turned off so when dragging, for instance, the whole pic moves rather than the bitmap inside the pic. To interact with objects inside, set pic.mouseChildren = true. Generally, for clarity, avoid adding objects to Shapes or Pics unless you are used to the mouseChildren setting. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// lazy-load an image in the same directory
new Pic("image.png").center();

// NOTE: the above may give a CORS security error locally
// to easily solve this see https://zimjs.com/tips.html#IMAGES

EXAMPLE

// lazy-load an image in the assets/ directory
new Pic("assets/image.png").center();

EXAMPLE

// lazy-load an image in the assets/ directory using PATH constant
PATH = "assets/"
new Pic("image.png").center();

EXAMPLE

// preload the image in the Frame along with path parameter
new Frame(FIT, 1024, 768, light, grey, ready, "image.png", "assets/");
function ready() {      
   new Pic("image.png").center(); // adds the preloaded assets/image.png
   
   // the PATH would be set to "assets/" by the Frame path parameter
   new Pic("sky.png").addTo(); // would lazy-load assets/sky.png
   
   PATH = "people/";
   new Pic("laura.png").addTo(); // would lazy-load people/laura.png
   new Pic("peter.png").addTo(); // would lazy-load people/peter.png
}

EXAMPLE

// preload all the images above
// the first two will use the path parameter
// the other two are in a different directory so can use an assets object {} with a different path
const assets = ["image.png", "sky.png", {assets:["laura.png", "peter.png"], path:"people/"}];
const path = "assets/";
new Frame(FIT, 1024, 768, light, grey, ready, assets, path);
function ready() {      
   new Pic("image.png").center(); // adds the preloaded assets/image.png
   new Pic("sky.png").addTo(); // adds the preloaded assets/sky.png
   new Pic("laura.png").addTo(); // adds the preloaded people/laura.png
   new Pic("peter.png").addTo(); // adds the preloaded people/peter.png
}

// alternatively the path could have been added to each asset:
assets = ["assets/image.png", "assets/sky.png", "people/laura.png", "people/peter.png"];
// this would be passed into Frame along with no path parameter
// and the assets would then be accessed in the ready event with the path included:
new Pic("asset/image.png").center();

EXAMPLE

const plates = ["plate1.png", "plate2.png", "plate3.png"];
// lazy-load random plate pictures in a Tile

// below would be broken with a warning in the console
// because the tile does not know the plate dimensions
new Tile(new Pic(plates), 4, 4).center();

// below would work because the dimensions of 200, 200 were provided
// however, if the plates are not actually 200,200 then it may look wrong
new Tile(new Pic(plates, 200, 200), 4, 4).center();

// below would work because preloading in Frame() or loadAssets() provides real dimensions
// when the tile is made, the dimensions are known
const load = F.loadAssets(plates);
load.on("complete", ()=>{
   new Tile(new Pic(plates), 4, 4).center();
   S.update();
});

CLOSE ▲

Aud(file, volume, loop, loopCount, pan, offset, delay, interrupt, maxNum, style, group, inherit)

Aud zim class - extends a createjs.EventDispatcher DESCRIPTION Use Aud() to play a sound with its play() method. The app must be interacted with before a sound can be played. There may be a security error when loading sounds locally for any Canvas app. Please read https://zimjs.com/tips.html#SOUND for easy solutions. Multiple instances of a sound can be played from the same Aud() object. When a sound is played it returns an object that can be used to change that specific instance. Use that object to change the volume, pan, to find out if the sound has looped or is complete or to pause() or stop() the sound. Before ZIM version ZIM 00, asset() or F.asset() was used to play sounds. These can still be used if desired. The Aud() class just wraps the asset() call. SEE: https://zimjs.com/zim/assets.html PRELOADING It is recommended that you preload sounds (along with images, etc.) using the Frame() assets and path parameters. After the frame loads, sounds can also be loaded on demand with F.loadAssets(). Batch loading sounds is more efficient and the sound will be ready when the Frame() is "ready" or loadAssets() is "complete". LAZY-LOADING If sounds are not preloaded then Aud() will use automatic loading (lazy-loading). Aud will give a "ready" event when loaded. This event is triggered 20 ms after making the object if the object is already preloaded. The "complete" event is used for when the sound is finished playing (not finished loading). AUDIOSPRITE An AudioSprite can alternatively be used which has many sounds in one sound file. There is data that goes with the AudioSprite to match a label to a time and duration. See the Frame docs under loadAssets() method although they can be loaded in the Frame as well. See also parseAudioSprite() and previewAudioSprite() functions in META section of Docs. NOTE The sound can be made at any time but the app must be interacted with before the sound can be played. This is a general Browser rule to stop being bombarded with sounds. It means that you will have to make a start button or a splash page that the user clicks or taps before a background sound can be played. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// There may be a security error when loading sounds locally for any Canvas app.
// Please read https://zimjs.com/tips.html#SOUND for easy solutions.

const click = new Aud("click.mp3");  // lazy-load a click sound
S.on("stagemousedown", ()=>{
   click.play(); // plays everytime the stage is clicked (sigh)
});

EXAMPLE

// make a backing sound but do not play it
// the user must first interact at least once with a mousedown/click/tap/change
const backing = new Aud({file:"backing.mp3", loop:true});

let backingSound; // this will store the sound that is playing
// make a Toggle button that starts toggled off
new Toggle({label:"SOUND"})
   .sca(.7)
   .pos(30,30,LEFT,BOTTOM)
   .change(e=>{
      // play the sound if it has not played
      // and toggle the instance's paused property if it has been played
      if (!backingSound) backingSound = backing.play();
      else backingSound.paused = !e.target.toggled;
   });

EXAMPLE

// preload a couple sounds from an assets/ directory (path)
new Frame(FIT, 1024, 768, light, dark, ready, ["sound.mp3", "backing.mp3"], "assets/");
function ready() {

   // show a Pane() to start so we know user has interacted before we play sounds
   
   new Pane("START GAME", yellow).show(init); // this calls init when closed
   
   function init() {
      // now the user has interacted to close the pane      
      new Aud("backing.mp3", .3, true).play(); // volume of .3 and looping
      
      // Make sounds only play once and start over when pressed again
      // otherwise, the default is play the sound completely each press.
      // If someone presses a lot - this is a lot of sounds playing at once.
      // If we left the interrupt at "none" the sound would finish before playing again
      // which is not optimal as we want the sound to start each time we press.
      // We could add these to the Aud() parameters but here we use STYLE
      STYLE = {maxNum:1, interrupt:"any"}
      const sound = new Aud("sound.mp3");
      new Circle().center().tap(()=>{
         sound.play();
      });   
   } // end init()   
   
} // end frame ready

EXAMPLE

// lazy-load a sound from a PATH of "assets/"
PATH = "assets/"
const long = new Aud("long.mp3");

// press on the stage - note the true for once at end of event
S.on("stagemousedown", ()=>{

   const sound = long.play({volume:.2});

   // adjust the sound after...
   timeout(2, ()=>{
      sound.volume = 1;
   });
   timeout(4, ()=>{
      sound.paused = true;
   });
   timeout(6, ()=>{
      sound.paused = false;
   });
   sound.on("complete", ()=>{
      F.color = red;
      // lazy-load a woot sound from path of assets/ and play twice
      new Aud("woot.wav").play({loopCount:2});
      S.update();
   });   

}, null, true); // true for once then remove the event

CLOSE ▲

Vid(file, width, height, volume, loop, align, valign, type, style, group, inherit)

Vid zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION Use Vid() to show a video. Use the play() method to start the video when loaded. The user must interact with the app before play() will work. There may be a security error when loading video locally for any Canvas app. Please read https://zimjs.com/tips.html#VIDEO for easy solutions. Vid will add an HTML 5 video and source tag in behind the scene and pipe the video into a ZIM Bitmap which is shown in the Vid container. Vid lets you pause() and play() and get the duration or get and set the currentTime and volume. A source property stores the HTML 5 video for more methods, properties and events. https://developer.mozilla.org/en-US/docs/Web/HTML/Element/video Vid also has a keyOut() method to key out a color from the video. SEE: https://zimjs.com/zim/assets.html Vid will give a "ready" and a "complete" event when ready to play. NOTE Vid is a container with a bitmap inside (see bitmap property). This means that other objects can be added to the Vid object. This is like the ZIM Shapes (Rectangle, Circle, etc.) which are containers and can have objects added to them. If doing this, note that the container has its mouseChildren turned off so when dragging, for instance, the whole vid moves rather than the bitmap inside the vid. To interact with objects inside, set vid.mouseChildren = true. Generally, for clarity, avoid adding objects to Shapes or Vids unless you are used to the mouseChildren setting. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// video is a container that will have a width of 800 and height of 600
// The video will be FIT inside these dimensions and centered by default
// Also see align and valign parameters
// At the start, it will have a type of "AC" once it loads it will be "Vid"
const video = new Vid("video.mp4", 800, 600)
   .center() // using 800x600
S.on("stagemousedown", () => {
   video.play();
});

EXAMPLE

// video is a container that will have a width of 800 and height of 600
// The video will be stretched to 800 by 600 - possibly changing the aspect ratio
const video = new Vid("video.mp4", 800, 600, FULL)
   .center() // using 800x600
S.on("stagemousedown", () => {
   video.play();
});

EXAMPLE

// video is a container with no width and height to start
// once the video is loaded the container will take the dimensions of the video
// and the center() will be called again to properly center the container
// just like lazy loading Pic().
const video = new Vid("video.mp4")
   .center() // will automatically be re-centered after loading
S.on("stagemousedown", () => {
   video.play();
});

EXAMPLE

// make the video cover the stage
const video = new Vid("video.mp4", W, H, FILL)
   .center()
S.on("stagemousedown", () => {
   video.play();
});

EXAMPLE

// load a video from the assets/ folder
PATH = "assets/"

// either provide width and height before scaleTo() or use the ready event
const video = new Vid("video.mp4", W, H).center();

video.on("ready", ()=>{
   // video.keyOut("#01b03f", .2);  // optional keyOut a green color
   // do not play the video until we interact with the app
   const pane = new Pane("VIDEO ON CANVAS!").show(()=>{
      // this (the callback) runs when the pane is closed
      video.play();
   });
});

// toggle the pause of the video
video.on("mousedown", ()=>{
   // note videoPaused property
   // not paused (which is for animation)
   video.pause(!video.videoPaused);
});

CLOSE ▲

SVG(svg, width, height, bitmap, splitTypes, geometric, showControls, interactive, style, group, inherit)

SVG zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION Use SVG() to show an SVG tag or file on the Canvas. There are two options, the default is as a Bitmap or choose an SVGContainer with Blob, Squiggle, and transformable shapes. Before ZIM version ZIM 00, svgToBitmap() or SVGContainer() was used to show SVGs. These can still be used if desired. The SVG() class just wraps these. SEE: https://zimjs.com/zim/assets.html NOTE ZIM has Squiggle() and Blob() which often can replace the need for SVG() and has many more benefits. These can be made with ZIM Pizzazz 4 at https://zimjs.com/paths Or an SVG path can be passed directly to the points parameter of a Blob or Squiggle. Squiggles and Blobs let the user: turn the paths editable animate objects on the path add Beads to the path animate the path shape animate the path to another path do hitTestPath on the path We recommend using SVG only when there is already an SVG that image you want to use. PRELOADING It is recommended that you preload SVG files using the Frame() assets and path parameters. After the frame loads, SVG files can also be loaded on demand with F.loadAssets(). Batch loading SVGs is more efficient and the width and height will be available when the Frame() is "ready" or loadAssets() is "complete". LAZY-LOADING If SVGs are not preloaded then SVG() will use automatic loading (lazy-loading). If width and height are provided, all will go smoothly. If width and height are not provided, ZIM will store various scaling and positioning commands and re-apply the commands once the images are loaded. This happens for center(), centerReg(), pos(), scaleTo(), outline() and perhaps others. This extra work is NOT required if assets are preloaded or a width and height are provided. Some controls like Tile() and Scroller() must have dimensions and will give a warning in the console. In the past there has been issues with cloning lazy-loaded objects before they are loaded, but this should work now. SVG will give a "ready" and a "complete" event when loaded. These events are triggered 20 ms after making the object if the object is already preloaded. NOTE SVG is a container with a bitmap inside (see bitmap property) or if the bitmap option is not selected there are other shapes inside. This means that other objects can be added to the SVG object. This is like the ZIM Shapes (Rectangle, Circle, etc.) which are containers and can have objects added to them. If doing this, note that the container has its mouseChildren may be turned off so when dragging, for instance, the whole SVG moves rather than the bitmap inside the SVG. To interact with objects inside, set pic.mouseChildren = true. Generally, for clarity, avoid adding objects to Shapes, Pics SVGs unless you are used to the mouseChildren setting. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// lazy-load an SVG
new SVG("file.svg").center().drag();

EXAMPLE

// assuming there is an SVG tag on the page - could be display:none
new SVG(zid("svgTagID")).center().drag();

EXAMPLE

// Find the SVG in an assets/ folder
PATH = "assets/"
// Tile a lazy-loaded SVG with dimensions - otherwise Tile would give a console warning
new Tile(new SVG("file.svg", 100, 100), 4, 4)).center();

// but the dimensions might not be right and the tile could look odd once the SVGs are loaded
// would be better to preload - see next example

EXAMPLE

// pre-load and Tile an SVG
new Frame(FIT, 1024, 768, light, grey, ready, "file.svg", "assets/");
function ready() {
   new Tile(new SVG("file.svg"), 4, 4)).center();
}

EXAMPLE

// add an SVGContainer from an SVG string
// this would make a simple Squiggle line with editable points
// see the Docs under SVGContainer for more complex examples and added information
// note the h t t p : should be edited to not have spaces - just avoiding Doc auto linking
const svg = `<svg  width="150" height="200" xmlns="h t t p ://www.w3.org/2000/svg">
<path id="lineAB" d="M 0 0 l 150 200" stroke="red" stroke-width="3" fill="none" />
</svg>`;
new SVG(svg, null, null, false).center();

CLOSE ▲

Speech()

Speech zim class - extends a createjs.EventDispatcher DESCRIPTION Create a new Speech() and use talk() or listen() The talk() will speak words The listen() will turn voice into words This is a short wrapper class for the Web Speech API https://developer.mozilla.org/en-US/docs/Web/API/Web_Speech_API/Using_the_Web_Speech_API Thanks Karel Rosseel for the initial research on Speech. SEE: https://zimjs.com/016/speech.html NOTE The listen() method is currently not supported by Apple iOS Web - only Native apps (grr) But the talk() method works on iOS and Android Web - however, there seems to be one voice. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const speech = new Speech();
// interact at least once before talking
new Button({label:"TALK"}).center().tap(()=>{
   speech.talk("Hello World");
});

EXAMPLE

// let user pick a voice
const speech = new Speech();
// interact at least once before talking
new Button({label:"TALK"}).center().mov(0,-120).tap(()=>{
   speech.talk("Hello World!", list?list.text:null);
});
let list;
speech.on("voiceschanged", ()=>{ // must wait for voices to be loaded
   if (list) list.dispose(); // seems to run only once but just in case
   list = new List(500,300,speech.voices,6).center().mov(0,120);
   S.update();
});

EXAMPLE

const speech = new Speech();
new Button({label:"LISTEN"}).center().tap(()=>{
   // Note: iOS does not support
   speech.listen();
});
speech.on("result", e=>{
   label.text = e.words;
   S.update();
})
const label = new Label({align:CENTER, text:""}).reg(CENTER).pos(0,200,CENTER,BOTTOM);

METHODS talk(text, voice, volume, lang, rate, pitch) - the computer will say the words returns an utterance object on which all these parameter can be dynamically set including the words text - the text to say (or see Web Speech API for special formats) voice (default "Microsoft David - English (United States)") - the voice also see "voiceschanged" event at which point speech.voices will be a list the voices do not need to be loaded if using the default voice volume (default 1) the volume of the voice lang (default user system language) the language of the voice rate (default 1) the rate of the voice pitch (default 1) the pitch of the voice stopTalking() - stop talking pauseTalking() - pause talking resumeTalking() - resume talking ;-) getVoices() - called automatically when the the Voice's voiceschanged event triggers his is set automatically but may take a second or two to load listen(interim, language) - start listening to the mic to record what is said this will dispatch a "result" event on the Speech object interim defaults to true and means it gives a results as each word is spoken set interim to false to give a result only after speaking is done (or a pause in speaking) the result event object (often e is used) will have a words property with the words and a confidence property with a percent as to how confident the match stopListening() - stop listening PROPERTIES type - holds the class name as a String voices - an array of string voices available for talk() - loads when "voiceschanged" event is dispatched (automatically set) voiceObjects - an array of voice objects with name and lang properties used internally by talk() - matches voices indexes voiceLanguages - an array of languages for the voices - matches voices indexes recognition - the SpeechRecognition() object created (used internally) has JS properties - see: https://wicg.github.io/speech-api/#speechreco-attributes for instance, set the default language as mySpeech.recognition.language = "en-US"; EVENTS dispatches a "voiceschanged" event when voices property will be ready - not needed if just using default voice dispatches "result" when either as each word is spoken if listen() is used (interim defaults to true) or at the end of speaking words if listen(false) is used (interim is set to false) the result event will have an event object (often e is used) that holds a words property with the words spoken and a confidence property that is a ratio (0-1) for confidence in the result Note: iOS (at this time) does not support the listen() and result event dispatches "speechend" events when listen() has detected an end to the talking dispatches an "error" event if no words are spoken, etc. the event object has an error property with the error message dispatches "start", "end" and "error" on the utterance object returned by talk() Note: there are more features to the Web Speech API - see the HTML docs CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Fonts - loaded into Frame()

Fonts For a Label object or components with labels DESCRIPTION As of ZIM ZIM 02, custom fonts can be loaded by their file name without the need for a font object {}. Custom fonts must be preloaded in the Frame() or loadAssets() assets parameter. Supported fonts are "ttf","otf","woff2","woff","fnt" files and Google fonts. The font is then available to Label and components with labels. ZIM wraps the CreateJS PreloadJS library to offer simplified loading. NOTE do not use uppercase letters on font name or extension - seems to not load on mobile. NOTE system fonts can be used without loading the font. ************** DO NOT make a new Font() - rather, pass the font information into the Frame assets parameter. Or load fonts when desired with Frame loadAssets() and wait for a complete event. In either case, the font will then be available for Labels ************** EXAMPLE

new Frame({ready, assets:"Reuben.otf", path:"assets/"});
function ready() {   
   new Label("Custom Font", 30, "Reuben").center();   
}

EXAMPLE

// here is the same but with the font object - used pre ZIM ZIM 02 - this still works
new Frame({ready, assets:{font:"Reuben", src:"Reuben.otf"}, path:"assets/"});
function ready() {
   new Label("Custom Font", 30, "Reuben").center();
}

EXAMPLE

// use a Google font https://fonts.google.com/ and apply it with a STYLE
// previously, the whole URL was needed:
// new Frame(FIT, 1024, 768, red, dark, ready, "https://fonts.googleapis.com/css?family=Dancing+Script");
// now, the gf_ shortcut can be used:
new Frame(FIT, 1024, 768, red, dark, ready, "gf_Dancing+Script");
function ready() {
   STYLE = {font:"Dancing Script"}; // or include + but not necessary.
   new Label("Custom Google Font").center();
   new Label("Second Custom Google Font").center().mov(0,100);
}

EXAMPLE

// with loadAssets, the previous example would be:
F.loadAssets("gf_Dancing+Script");
F.on("complete", ()=>{
   new Label("Custom Google Font", 50, "Dancing Script").center();
});

CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Keys - keyboard methods and events

Keys "keydown" and "keyup" Frame events DESCRIPTION The Frame has a "keydown" and "keyup" events to capture key presses and a keyboardMessage() method to prompt for keyboard interactivity. When an app is first loaded it cannot receive keyboard events until it is interacted with. Interaction must be a mousedown or click - not just an over or move interaction. Often, we will make an intro Pane() or play Button() for a game, for instance, before playing sounds. In ZIM 014 we added a keyboardMessage() method to prompt for an interaction so key events are activated. Also see ZIM Keyboard(), TextEditor(), TextInput() and MotionController() for various keyboard functionality. EXAMPLE

keyboardMessage(); // will prompt for keyboard control
F.on("keydown", e=>{
   zog(e.key) // a string of the keypress
   zog(e.keyCode) // the numeric code of the keypress (older but used in lots of examples)
   zog(F.altKey) // true if alt is pressed - also: ctrlKey, metaKey, shiftKey
});
// for controlling a game object with keyboard please see MotionController(obj, "keydown")
// as the MotionController solves a few tricky issues with key control

CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Cursors - custom cursors

Cursors Frame property DESCRIPTION In ZIM 014 we added support for custom cursors as a Frame property to get or set an object literal with custom cursors that override the CSS cursors or act on their own. See: https://zimjs.com/014/cursors.html the format is: F.cursors = {default:DisplayObject, pointer:DisplayObject, madeUp:DisplayObject, etc.} NOTE: use the cur() method to specify which cursor is on an object. drag(), tap(), etc. will already work with the custom cursor system set F.cursors = null to turn off custom cursors There is a Frame cursorsExclude() method to exclude certain objects from the custom cursors. There is a Frame cursorObj property to indicate the current custom cursor. EXAMPLE

F.cursors = {
   // the default cursor will be an emitter
   default:new Emitter({
      obj:new Circle({min:3,max:8},white),
      force:1,
      gravity:0
   }),
   box:new Rectangle(40,40,clear,white,8,0,true)
      .reg(CENTER)
      .animate({props:{dashedOffset:-110}, rewind:true, loop:true})
}
const rect = new Rectangle(500,500,red).center().cur("box"); // apply the box cursor

CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Tilt - device motion and orientation events

Tilt "devicemotion" and "deviceorientation" Frame events DESCRIPTION The Frame has a "devicemotion" event to capture device tilt and a "deviceorientation" to capture device rotation (like a compass) Also see the PermissionAsk() class which will handle asking for permission on iOS devices. NOTE For either event the Frame sensors parameter MUST be set to true EXAMPLE

// for capturing tilt on device (rotation about an axis)
// also SEE the PermissionAsk example below
// also set Frame sensors parameter to true
// and be on a mobile device
const label = new Label().center();
F.on("deviceorientation", e=>{
   label.text = e.rotation.x +","+ e.rotation.y +","+ e.rotation.z;
   S.update();
});

EXAMPLE

// on iOS, the sensors must be allowed first - this example works for all devices
const permissionType = "deviceorientation"; // or "devicemotion"
const ask = new PermissionAsk(init, permissionType);
function init(yes) {
   // if the user answers yes to the PermissionAsk
   const errorPane = new Pane("SENSOR not available",yellow);
   if (yes) {      
      // use the sensors       
      label.text = decimals(e.rotation.x) +","+ decimals(e.rotation.y) +","+ decimals(e.rotation.z);
      S.update();
   } else { // answered no to PermissionAsk dialog      
      errorPane.show();
   }   
}

EXAMPLE

// for shaking motion - ALSO see the PermissionAsk example above for iOS
// and replace "deviceorientation" with "devicemotion"
// and replace e.rotation.x, etc. with e.acceleration.x etc.
// also set Frame sensors parameter to true
// and be on a mobile device
const label = new Label().center();
F.on("devicemotion", e=>{
   label.text = e.acceleration.x +","+ e.acceleration.y +","+ e.acceleration.z;
   S.update();
});

EVENTS "devicemotion" - for tilt (also set Frame sensors parameter to true) fired on moving mobile device - like a tilt or shake - eventObject.acceleration holds x, y and z properties of motion "deviceorientation" - for rotation (also set Frame sensors parameter to true) fired as device orientation changes: eventObject.rotation.x (beta in HTML specs) holds rotation about the x axis between -180 and 180 (tipped forward or backward) eventObject.rotation.y (gamma in HTML specs) holds rotation about the y axis between -90 and 90 (tipped left or right) eventObject.rotation.z (alpha in HTML specs) holds rotation about the z axis 0-360 clockwise (relative to orientation when app loads) note rotation.z is 360-alpha compared to the HTML 5 specs note also that beta, gamma and alpha from the HTML 5 specs are also provided CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

PermissionAsk(callback, permissionType, color, backgroundColor, style, group, inherit)

PermissionAsk zim class - extends a zim.Pane which extends a zim.Container DESCRIPTION A circular confirmation widget to ask the user if they want a permission for iOS. For some iOS permissions, the app needs to be interactive with first before permission can be asked! This is for iOS only - if not in iOS then will just pass through the test. NOTE this started as SensorAsk but the class has been adjusted to handle other permissions and the name has been changed in ZIM 016 NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// on iOS, the sensors must be allowed first
const permissionType = "deviceorientation"; // or "devicemotion"
const ask = new PermissionAsk(init, permissionType);
function init(yes) {
   // if the user answers yes to the PermissionAsk
   const errorPane = new Pane("SENSOR not available",yellow);
   if (yes) {      
      // use the sensors
      const label = new Label({text:"test on mobile", align:CENTER}).centerReg();
      F.on("devicemotion", e=>{
         // use the sensors       
         label.text = decimals(e.rotation.x) +","+ decimals(e.rotation.y) +","+ decimals(e.rotation.z);
         S.update();
      })
   } else { // answered no to PermissionAsk dialog      
      errorPane.show();
   }   
}

EXAMPLE

// goes right to permissions on computer and android
// pops up a PermissionAsk Pane on iOS then if yes, goes to permissions on iOS
new PermissionAsk(init, "cam");
function init(val) {
   new Label(val).center(); // media stream if yes to permissions otherwise false
   S.update();
}

EXAMPLE

// on iOS, the app must be interacted with before using mic or cam
// this goes right to permissions on computer and android
// but pops up a PermissionAsk Pane on iOS then if yes, goes to permissions on iOS
new PermissionAsk(init, "mic"); // or "cam" or "miccam"
function init(val) {
   zog(val); // media stream if yes to permissions otherwise false
   S.update();
}

PARAMETERS - accepts ZIM DUO regular parameters in order or a configuration object with parameters as properties callback - the function to callback when permission is accepted if the permissionType is deviceorientation or devicemotion this will receive true for accept or false for no permission if the permissionType is audio, video or audiovideo this will receive a stream if accepted or false if not for not iOS, the system permissions will appear for iOS the PermissionAsk Pane will be shown and the system permissions in all cases, the callback will be called on result the parameter given to the callback will be true (sensors) or a media stream (mic / cam) or false if not accepted permissionType - (default "deviceorientation") the string deviceorientation, devicemotion, mic, cam, or miccam color - (default zim.dark) the font and border color of the widget backgroundColor - (default zim.lighter) the backgroundColor of the widget METHODS dispose() - dispose the PermissionAsk ALSO see all the methods of a zim Pane() including hide() ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - name of class as a string permissionType - the type of permission requested label - reference to the zim Label yes - reference to the zim Button with YES no - reference to the zim Button with NO ALSO see ZIM Pane for properties such as: backdropColor, etc. ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Colors - red, salmon, orange, green, pink, blue, brown, yellow, purple, interstellar, black, darker, licorice, dark, charcoal, grey, gray, granite, tin, pewter, silver, fog, mist, light, moon, lighter, wh¡te, faint, clear zim constants (lowercase) DESCRIPTION ZIM colors for convenience - such as blue, green, dark, etc. Traditional HTML colors as strings can also be used such as "blue", "tomato", etc. Also available are HEX numbers as strings such as "#333" or "#cc0000" and RGB and RGBA of 0-255 values for red, green, blue with 0 being no color and 255 being full color then alpha from 0 to 1 as a decimal with 0 being transparent to 1 being opaque. These are in a string such as "rgb(0,0,255)" or "rgba(0,0,0,.2)" (.2 is alpha) NOTE These DO NOT require the zim namespace, even if zns=true is set or if using node modules without zimplify() NOTE ZIM colors started off as properties of the frame so F.blue but the frame properties have now been removed as they are stored on the zim namespace and as globals FAINT AND CLEAR faint is "rgba(0,0,0,.01)" which is the faintest color that can be interacted with clear is "rgba(0,0,0,0)" which is invisble but cannot be interacted with However, clear can be used along with expand(0) to be able to interact with an object where the expand(0) (or whatever padding is desired) adds a CreateJS hitArea. DARKEN AND LIGHTEN ZIM has added darken() and lighten() methods to the JS String prototype to handle easy darkening and lightening of colors This is very handy in desiging. https://zimjs.org/spells.html?item=darken https://zimjs.org/spells.html?item=lighten COLOR BLENDS ZIM has toColor() to move one color towards another color https://zimjs.org/spells.html?item=toColor ALPHA ZIM has toAlpha() to set the alpha of colors https://zimjs.org/spells.html?item=toAlpha GRADIENTS ZIM DisplayObjects accept GradientColor(), RadialColor() and BitmapColor() objects - see docs under the CODE module for info. https://zimjs.org/spells.html?item=GradientColor https://zimjs.org/spells.html?item=RadialColor https://zimjs.org/spells.html?item=BitmapColor NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

new Circle(100, blue).center();
// is the same as
new Circle(100, "#50c4b7").center();

// ZIM colors (or HTML colors) can have alpha adjusted as follows:
new Circle(100, blue.toAlpha(.5)).center();

// colors can be darkened or lightened using darken() or lighten()
new Circle(100, blue.darken(.5)).center();

// colors can be blended using toColor()
new Circle(100, blue.toColor(red, .2)).center();

CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Constants - FIT, FILL, FULL, LEFT, RIGHT, CENTER, MIDDLE, START, END, TOP, BOTTOM, OVER, UNDER, HORIZONTAL, VERTICAL, BOTH, RANDOM, RADIAL, UP, DOWN, NEXT, PREV, AUTO, DEFAULT, ALL, NONE, AVE, GET, POST, LOCALSTORAGE, SOCKET, TO, FROM, BOTH, SINE, SQUARE, TRIANGLE, SAW, ZAP, IGNORE zim constants DESCRIPTION ZIM positioning, data and sound constants for convenience if desired. These DO NOT require the zim namespace, even if zns=true is set or if using node modules without zimplify() These are all equal to strings with lowercase values. So using TOP is the same as using "top" Positioning: FIT, FILL, FULL, LEFT, RIGHT, CENTER, MIDDLE, START, END, TOP, BOTTOM, OVER, UNDER, HORIZONTAL, VERTICAL, BOTH, RANDOM, RADIAL, UP, DOWN, NEXT, PREV, AUTO, DEFAULT, ALL, NONE, AVE Data: GET, POST, LOCALSTORAGE, SOCKET, TO, FROM, BOTH Sound: SINE, SQUARE, TRIANGLE, SAW, ZAP Style: IGNORE NOTE there are a set of constants at the start of the CONTROLS module as well NOTE for START and END, see DIR constant under CONTROLS module. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

new Tip("hello", RIGHT, MIDDLE).show();
// same as
new Tip("hello", "right", "middle").show();

CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Globals - F, S, W, H, M

Globals - F, S, W, H, M zim globals DESCRIPTION F, S, W, H, M are globals given when using ZIM Frame. There are also globals for the ZIM CONSTANTS and ZIM Colors - see the Docs above and a few variables and functions listed under ALL INITIAL GLOBALS below. The globals NEVER require the zim namespace and are global in the JavaScript window scope. ZIM has a method called zimplify() that can make all ZIM classes, functions and properties global. zimplify() loops through all properties on the zim namespace and adds them to the JavaScript window. Examples are Frame(), Button(), center(), STYLE, Emitter(), etc. zimplify() is automatically run when using the CDN ES module or script tags unless the global variable zns is set to true before importing ZIM. If zns is set to true, then the zim namespace is required: zim.Frame(), etc. If using NPM, then zimplify() is NOT automatically run, and the zim namespace is required, but zimplify() can be used at the top to turn all ZIM classes, functions and properties global. NOTE there are a set of constants at the top of the CONTROLS module like STYLE, PATH, TIME, etc. These are NOT global unless zimplify() is run. So default global for ES module and scripts but default NOT global for NPM ADDED ZIM ZIM 01: F - the ZIM default frame - also there is a zimDefaultFrame and zdf global variable made - but F is easier. the ZIM default frame is the first frame made - or the frame that last has the setDefault() method called S - the Stage of the default frame - this will be the stage that addTo(), center(), etc. get added to if no container is provided W - the width of the default frame - this will be updated automatically in FULL mode on window resize. H - the height of the default frame - this will be updated automatically in FULL mode on window resize. M - false if not on mobile, otherwise reports the mobile device "iOS", "android", etc. - can also use mobile(). There are many previous examples that declare frame, stage, stageW and stageH this technique can still be used but you are welcome to use the F, S, W, H if desired. ALL INITIAL GLOBALS: WW (JavaScript window - saves 1.5K as window reference is not minified) createjs (namespace) zim (namespace) zns (zim name space - set to true before importing ZIM to require namespace) zon (set to false before importing ZIM to stop all console messages) zimBlob (used to avoid import conflict with JS Blob) zimWindow (used to avoid import conflict with JS Window) z_i (global iterator - reused rather than declaring i all the time) z_d (function for ZIM Distill - like tree-shaking) isDUO (used for ZIM DUO technique) zimify (turn ZIM functions into methods as of in ZIM 4TH) zimplify (function that adds all ZIM Objects to the global namespace) zimDefaultFrame (an original global reference to the default frame) zdf (the shortened reference to the default frame) F, S, W, H, M (frame, stage, stageW, stageH, mobile) ZIM WRAP module of short globals starting with z - See the WRAP section of the DOCS zog, zid, zss, zgo, zum, zot, zop, zil, zet, zob, zik, zta, zor zog has zogr, zogb, zogg, etc, for logging with various colors ZIM CONSTANTS: See CONSTANTS entry in the Docs above. ZIM Colors: See Colors entry un the Docs above. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

new Frame({ready});
function ready() {
   const c = new Circle().pos(W*.2, H*.2);
   F.on("keydown", e=>{
      c.sca(rand(.5,3));
      S.update();
      zog(M); // false if on desktop/laptop
   });
}

CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Stage(canvasID, touch, singleTouch)

Stage zim class - extends a createjs.Stage which extends a createjs.Container DESCRIPTION An extension of a createjs.Stage that includes read only type, width and height properties, loop and hitTestGrid methods. When using zim.Frame, there should be no reason to make a zim.Stage. This was put in place to match the ZIM TypeScript typings for stage width and height. Also see https://www.createjs.com/docs/easeljs/classes/Stage.html NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const stage = new Stage("canvasID");

PARAMETERS canvasID - (default null) string ID for canvas tag touch - (default false) set to true for touch on mobile will be multitouch unless singleTouch is set to true singleTouch - (default false) set to true for single touch will override touch setting and turn touch to true but with single touch METHODS loop(call, reverse, step, start, end) - see the ZIM Display Methods loop() for details see the ZIM Display Methods loop() for details hitTestGrid(width, height, cols, rows, x, y, offsetX, offsetY, spacingX, spacingY, local, type) see the ZIM Display Methods hitTestGrid() for details disposeAllChildren() - remove and dispose all children See the CreateJS Easel Docs for Stage methods, such as: clear, update, toDataURL And all the Container methods such as: on, off, setBounds, getBounds, globalToLocal, etc. PROPERTIES frame - if made with ZIM Frame then frame points to the frame that made the stage type - holds the class name as a String width - read only width set by ZIM Frame height - read only height set by ZIM Frame ALSO see the CreateJS Easel Docs for Stage properties, such as: autoClear, canvas, nextStage, etc. and all the Container properties, such as: children, mouseChildren, filters, cacheCanvas, etc. Note: also makes a partial zdf allowing circle.center() to work but will be overwritten if an actual Frame is made EVENTS See the CreateJS Easel Docs for Stage events, such as: mouseenter, mouseleave, stagemousedown, stagemousemove, stagemouseup, drawstart, drawend, etc. and all the Container events such as: click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤TOUR😊

CLOSE ▲

StageGL(canvasID, options, touch, singleTouch)

StageGL zim class - extends a zim.Stage which extends a createjs.Stage DESCRIPTION An extension of a zim.Stage for WebGL support See ZIM Stage and https://www.createjs.com/docs/easeljs/classes/StageGL.html NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const stage = new StageGL("canvasID", {preserveBuffer:true, antialias:true});

PARAMETERS canvasID - (default null) string ID for canvas tag options - (default null) an object literal with the following properties FROM https://www.createjs.com/docs/easeljs/classes/StageGL.html preserveBuffer (default false) If true, the canvas is NOT auto-cleared by WebGL (the spec discourages setting this to true). This is useful if you want persistent draw effects. antialias (default false) Specifies whether or not the browser's WebGL implementation should try to perform anti-aliasing. This will also enable linear pixel sampling on power-of-two textures (smoother images). transparent (default false) If true, the canvas is transparent. This is very expensive, and should be used with caution. premultiply (default false) Alters color handling. If true, this assumes the shader must account for pre-multiplied alpha. This can help avoid visual halo effects with some assets, but may also cause problems with other assets. autoPurge (default 1200) How often the system should automatically dump unused textures with purgeTextures(autoPurge) every autoPurge/2 draws. See purgeTextures for more information. touch - (default false) set to true for touch on mobile will be multitouch unless singleTouch is set to true singleTouch - (default false) set to true for single touch will override touch setting and turn touch to true but with single touch METHODS loop(call, reverse, step, start, end) - see the ZIM Display Methods loop() for details see the ZIM Display Methods loop() for details hitTestGrid(width, height, cols, rows, x, y, offsetX, offsetY, spacingX, spacingY, local, type) see the ZIM Display Methods hitTestGrid() for details disposeAllChildren() - remove and dispose all children See the CreateJS Easel Docs for StageGL methods: https://www.createjs.com/docs/easeljs/classes/StageGL.html PROPERTIES frame - if made with ZIM Frame then frame points to the frame that made the stage type - holds the class name as a String width - read only width set by ZIM Frame height - read only height set by ZIM Frame See the CreateJS Easel Docs for Stage properties: https://www.createjs.com/docs/easeljs/classes/StageGL.html Note: also makes a partial zdf allowing circle.center() to work but will be overwritten if an actual Frame is made EVENTS See the CreateJS Easel Docs for StageGL events, such as: mouseenter, mouseleave, stagemousedown, stagemousemove, stagemouseup, drawstart, drawend, etc. and all the Container events such as: click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤TOUR😊VIDS

CLOSE ▲

Container(a, b, c, d, style, group, inherit)

Container zim class - extends a createjs.Container DESCRIPTION A Container object is used to hold other display objects or other containers. You can then move, rotate, scale and skew the container and all objects inside will transform accordingly. You can apply an event on a container and use the target property of the event object to access the object in the container that caused the event or use the currentTarget property of the event object to access the container itself. Containers do not have bounds unless some items in the container have bounds - at which point the bounds are the combination of the bounds of the objects with bounds. You can manually set the bounds with setBounds(x,y,w,h) - read the CreateJS docs. Or pass in width and height, or boundsX, boundsY, width, height to have Container set bounds. Manually set bounds will not update automatically unless you setBounds(null). NOTE All the ZIM shapes and components extend the Container. This means all shapes and components inherit the methods and properties below and indeed, the Container inherits all the createjs.Container methods and properties. See the CreateJS documentation for x, y, alpha, rotation, on(), addChild(), etc. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const container = new Container().loc(100,100);

// demonstration of adding drag() to a Container
const rect = new Rectangle(100, 100, blue)
.addTo(container); // add rectangle to container
const circle = new Circle(40, red)
.center(container) // add the circle to the container and center
container.drag(); // will drag either the rectangle or the circle
container.drag({all:true}); // will drag both the rectangle and the circle

// below will reduce the alpha of the object in the container that was clicked (target)
container.on("click", e => {e.target.alpha = .5; S.update();});

// below will reduce the alpha of all the objects in the container (currentTarget)
container.on("click", e => {e.currentTarget.alpha = .5; S.update();});

EXAMPLE

// Here we apply the normalize() method of the Container to a Tile (which is a Container)
// and scale the children based on the resulting ratio
const tile = new Tile(new Rectangle(70,70,white,black).reg(CENTER), 9, 1, 20)
   .normalize("x", CENTER)
   .center();

// scale the items based on the distance from the center
// note, could set the strokeObj:{ignoreScale:true} param of Rectangle above too
tile.loop(item=>{
   zogy(decimals(item.ratio)); // 0, .3, .5, .8, 1, .8, .5, .3, 0
   item.sca(.5 + item.ratio*2);
});

// adjust the spacing by re-tiling the scaled items
const final = new Tile({
   obj:tile.items,
   cols:tile.items.length,
   rows:1,
   spacingH:-10,
   unique:true, // make sure we do not pick (ZIM VEE) from the array
   valign:CENTER
}).center()

tile.dispose();

final.sortBy("ratio"); // make more central objects come to front

EXAMPLE

// In this case we animate the children based on the rate
// animate() the rate and use sequence:0 to apply different speed to each item
const tile = new Tile(new Rectangle(10, 10, series(green,blue,yellow)), 20, 20, 5, 5)
   .normalize("reg", CENTER)
   .center()
   .noMouse()
   .animate({
      props:{scale:2},
      time:2,
      ease:"elasticOut",
      rate:target=>{return 1 + target.ratio*4},
      sequence:0 // turn on per item animation
   });

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) ** Container has a, b, c, d parameters to set x, y, width and height There are two settings that are more common than providing all four parameters: 1. provide no parameters to make a Container with bounds that grow with content. 2. provide a and b only to make a Container with a width and height (and bounds with x and y of 0) Here is what happens when you provide 1, 2 or all of the a,b,c,d parameters: a - (default null) - width and height will be equal to parameter a (x and y will be 0) or provide a ZIM Boundary() object or createjs Rectangle() object with x, y, width and height properties a, b - (default null) - the width and height (x and y will be 0) this is the normal way to make a container with a starting width and height a, b, c, d - (default null) - the x, y, width and height of the bounds if parameter a is not set, then the Container will take bounds that grow with its content the bounds of the Container can be set at any time with setBounds(a, b, c, d) if the bounds are set, then the Container bounds will not change as content is added the bounds can be removed with setBounds(null) and the Container will get auto bounds style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS * This class has all the DISPLAY METHODS introduced in ZIM 4TH * the methods are available to all ZIM Display objects that extend a ZIM Container * such as ZIM Rectangle, Circle, Triangle, BLob * as well as all components like: Label, Button, Slider, Dial, Tab, Pane, etc. * as well as the ZIM display wrappers: Container, Shape, Sprite, MovieClip and Bitmap cache(width||x, height||y, null||width, null||height, scale, options, margin, rtl, willReadFrequently) - overrides CreateJS cache() and returns object for chaining ** Supports ZIM DUO If you do not provide the first four parameters, then the cache dimensions will be set to the bounds of the object width||x - (default getBounds().x) the width of the chache - or the x if first four parameters are provided height||y - (default getBounds().y) the height of the chache - or the y if first four parameters are provided width - (default getBounds().width) the width of the chache - or null if first two parameters are provided height - (default getBounds().height) the height of the chache - or null if first two parameters are provided scale - (default 1) set to 2 to cache with twice the fidelity if later scaling up options - (default null) additional parameters for cache logic - see CreateJS somewhere for details also added adjustBounds property for options - set to true to set new bounds and registration point on cached objects with x,y,width,height different than the original this appears to NOT be the default with createjs cache() which keeps the original registration point and bounds automatically fixing this changes lots of things so use the adjustBounds option when needed for instance when caching parts of a container and requiring hit tests or the part to be draggable, etc. margin - (default 0) add or subtract a margin from the bounds eg. margin:10 will make the cache size 10 pixels more on all sides this can be handy when caching objects with borders - that go half outside the natural bounds rtl - (default null) set to true to use right to left willReadFrequently - (default null) set to true if planning on using operations with getImageData() or toDataURL() if you get a warning in the console about willReadFrequently then set this to true updateCache() - updates the cache if cache() is set uncache() - uncaches and returns object for chaining setBounds(width||x||Boundary, height||y, null||width, null||height) - overrides CreateJS setBounds() and returns object for chaining If you do not provide any parameters, then the bounds will be reset to the calculated bounds width||x||Boundary - (default null) the width of the bounds - or the x if four parameters are provided or a ZIM Boundary Object {x,y,width,height} - same as CreateJS Rectangle - thanks Joseph Diefenbach height||y - (default width) the height of the bounds - or the y if four parameters are provided width - (default null) the width of the bounds - or null if only the first two parameters are provided height - (default null) the height of the bounds - or null if only the first two parameters are provided getBounds(targetSpace) - overrides CreateJS getBounds() and returns a rectangle with x, y, width height of bounds (not including outside of border) pass in a Container (including Stage) to map rectangle to that coordinate space childrenToBitmap() - turns content to a Bitmap and adds bitmap to container - removing all other children sortBy(prop) - sorts the children of the container by a property - must be numeric normalize(prop, from, from2, min, max, factor, clamp) - sets a ratio property (1 to 0) for each item in a Container. passing in no parameters will normalize to the last normalized parameters - also see normalized property ** Supports ZIM DUO PARAMETERS: prop - the property (as a string) to normalize from - where the ratio will start at 1, values can be START (highest number), END (lowest number), CENTER, LEFT, RIGHT from2 - used with "reg" with values of START, END, CENTER, TOP, BOTTOM - see the SPECIAL note down below. min and max - can be set to override the calculated min and max values for the items in container - min and max are ignored for "reg" factor - (default 1) is going the same direction and -1 is going in opposite direction targetRound - (default false) set to true to round the converted number clamp - (default true) set to false to let results go outside min and max range WORKINGS: the ratio is 1 when it is closest to the from parameter(s) and 0 when farthest For example, container.normalize("x") would provide a ratio property for each item in the container with a default from START that would be 1-item.x/(largestX-smallestX) In other words, if the item is the least distance in the x then ratio is 1, if the item is the most distance in the x then the ratio is 0 The from parameter will determine where the ratio is the largest. container.normalize("x", END) would be 0 for an x of 0 and 1 for an item on the right side container.normalize("x", CENTER) would be 1 for an item in the middle and 0 for items at the start and end Set factor to -1 to reverse the direction of the ratio - eg. 0 in the middle and 1 at the start and end. Or set min and max values to override the calculated min and max The clamp, if true, will keep values between min and max or let them go outside these if false there is one ratio property per object but this can be set and used any number of times. NOTE: The ratio property is like a ZIM Proportion convert() but to each item in the container. A provided property is converted based on a min and max to a target of 1 to 0 (factor is inverted) SPECIAL: a property of "reg" will actually set the registration to the from value the still property of reg() is used to keep the item from shifting. An _orX and _orY will be provided on each item for original regX and regY. setting normalize("reg", CENTER) will do both horizontal and vertical to the container dimensions. If this is not desired, use container.loop(item=>{item.reg(item._orX, item._orY, true)}); to set the registration point back but still keep the ratio property USAGE: the ratio property can be used by animate() with sequenceRatio to set the rate of an animation based on ratio Or the ratio property can be used directly - for instance, to set a scale based on a distance from somewhere Or as another example, set the alpha based on the rotation of a shape in the container specialColor(colorCommand, colorObject) - used internally by ZIM Shapes to set GradientColor, RadialColor and BitmapColor on a fill or stroke color command hasProp(property as String) - returns true if property exists on object else returns false clone(exact) - clones the container, its properties and all its children exact (default false) ZIM VEE (Pick) values are active in clones unless exact is set to true For instance, if a Container holds a new Circle(20,[blue,green]) then its clone might be blue or green If exact is set to true then the clone will be whatever color was picked for the original circle disposeAllChildren() - removes and disposes all children but leaves the container (see also CreateJS removeAllChildren() which does not dispose them) dispose(disposing) - removes from parent, removes event listeners - must still set outside references to null for garbage collection if calling dispose() on the super class from a custom class then pass in true to indicate already started dispose (otherwise infinite loops) ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES ** common to all DisplayObjects that extend a Container such as ZIM Shapes and Components type - holds the class name as a String group - used when the object is made to add STYLE with the group selector (like a CSS class) ** bounds must be set first (or width and height parameters set) for these to work ** setting these adjusts scale not bounds and getting these uses the bounds dimension times the scale width - gets or sets the width. Setting the width will scale the height to keep proportion (see widthOnly below) height - gets or sets the height. Setting the height will scale the width to keep proportion (see heightOnly below) widthOnly - gets or sets the width. This sets only the width and may change the aspect ratio of the object heightOnly - gets or sets the height. This sets only the height and may change the aspect ratio of the object ratio - get a ratio set by the Container normalize method() - or Tile itemRegX, itemRegY parameters this will probably be a value from 1 to 0 as to how close the property is the end specified in the from parameter of normalize() a value of 1 is the closest and a value of 0 is the farthest - see the normalize() method for details normalized - get if the container has been normalized - see normalized parameter draggable - set to true for a default drag() and false for a noDrag() level - gets or sets the level of the object in its parent container (or the stage) - a property for parent.getChildIndex() and parent.setChildIndex() depth - for ZIM VR - the depth used to shift left and right channel and for parallax in VR - also see dep() ZIM Display method blendMode - how the object blends with what is underneath - such as "difference", "multiply", etc. same as CreateJS compositeOperation effects - an object that holds effects added such as blur, glow, shadow, color, multi and alpha - see effect() under ZIM Methods ** the following are convenience Effects that run a ZIM MultiEffect() ** these can use a lot of processing when animating - see Docs for effects() ** batch versions are available too as hueBatch, etc. these will not update the effect until updateEffects() is called on the object hue - the tint of an object between -180 and 180 with 0 being no change Also see the keyOut() method of Bitmap(), Pic() and SVG() that has a replacement color parameter saturation - the amount of color of an object between -100 and 100 with 0 being no change brightness - the lightness or darkness of an object between -255 and 255 with 0 being no change contrast - the crispness of an object between -100 and 100 with 0 being no change ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scale, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS See the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤TOUR😊BITS

VIDS

CLOSE ▲

Shape(a, b, c, d, graphics, optimize, style, group, inherit)

Shape zim class - extends a createjs.Shape DESCRIPTION ZIM Shape lets you draw dynamic shapes beyond the ZIM provided shapes. You make a new shape object and then draw in its graphics property using similar commands to the HTML Canvas commands (and Flash Bitmap drawing). See the CreateJS Easel Shapes and Graphics docs: https://www.createjs.com/docs/easeljs/classes/Graphics.html ALSO SEE: https://zimjs.org/spells.html?item=Generator for dynamically drawing into shapes like Processing (P5js) ALSO SEE: https://zimjs.org/spells.html?item=Squiggle,Blob for odd shapes and user adjustable shapes ALSO SEE: https://zimjs.org/spells.html?item=Pen for dynamic drawing of lines ALSO SEE: https://zimjs.org/spells.html?item=Connectors for dynamic connections // these mean we rarely use Shape directly but all of above were made in ZIM with Shape NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) NOTE as of ZIM 10.6.0 the tiny API is available right on the Shape (no need for graphics) EXAMPLE

// NEWER CODE
// Uses the tiny API (see options down below) right on the ZIM Shape
// for example: f() is fill() and dr() is drawRect()
// s() is beginStroke(), ss() is setStrokeStyle(), mt() is moveTo(), lt() is lineTo()

// draw a red rectangle into a shape
new Shape().f(red).dr(0,0,200,100).addTo();
// but it would be easier to use
// new Rectangle(200, 100, red).addTo();

// we can draw lines, etc. (but also see the ZIM Line object)
new Shape().s(blue).ss(5).mt(200,200).lt(300,300).addTo();

// note - we can draw as much as we want in the same shape

EXAMPLE

// OLDER CODE
// The first example uses a tiny API (see options below)
// The traditional full commands are available on the graphics object:
const shape = new Shape().addTo();
shape.graphics.beginFill(red).drawRect(0,0,200,100);

// or often we stored the graphics object in a variable g
const g = shape.graphics;
g.beginStroke(blue).moveTo(200,200).lineTo(300,300);

EXAMPLE

// to change a color or stroke after it has been made use command:
const shape = new Shape().addTo();
const strokeColor = shape.s(red).command;
shape.dr(50,50,100,100);
S.update();
timeout(1, ()=>{
   strokeColor.style = blue;
   S.update();
});
// This seems a little complex which is why ZIM provides many basic shapes
// Rectangle, Circle, Triangle, Squiggle, Blob, Poly, Line, Flare
// that can be adjusted dynamically with properties

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) ** Shape supports three different sets of parameters as follows: a - (default null) - width and height equal to parameter a (x and y will be 0) a, b - (default null) - the width and height (x and y will be 0) a, b, c, d - (default null) - the x, y, width and height of the bounds graphics - (default null) a CreateJS Graphics instance (see CreateJS docs) or just use the graphics property of the shape object (like usual) optimize - (default false) set to true to not store graphics methods directly on Shape this means the shapes graphics property will need to be used to access f(), s(), ss(), etc. style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS The following shortcuts to CreateJS graphics methods are provided (as long as optimize is false) See https://www.createjs.com/docs/easeljs/classes/Graphics.html for definitions and parameters mt() moveTo lt() lineTo a() arc at() arcTo bt() bezierCurveTo ct() curveTo qt() quadraticCurveTo (same as curveTo) r() rect cp() closePath c() clear f() beginFill lf() beginLinearGradientFill rf() beginRadialGradientFill bf() beginBitmapFill ef() endFill ss() setStrokeStyle sd() setStrokeDash s() beginStroke ls() beginLinearGradientStroke rs() beginRadialGradientStroke bs() beginBitmapStroke es() endStroke dr() drawRect rr() drawRoundRect rc() drawRoundRectComplex dc() drawCircle de() drawEllipse dp() drawPolyStar pg() polygon // added in ZIM CreateJS 1.3.3 (Diamond) p() decodePath cache(width||x, height||y, null||width, null||height, scale, options, margin, rtl, willReadFrequently) - overrides CreateJS cache() and returns object for chaining ** Supports ZIM DUO If you do not provide the first four parameters, then the cache dimensions will be set to the bounds of the object width||x - (default getBounds().x) the width of the chache - or the x if first four parameters are provided height||y - (default getBounds().y) the height of the chache - or the y if first four parameters are provided width - (default getBounds().width) the width of the chache - or null if first two parameters are provided height - (default getBounds().height) the height of the chache - or null if first two parameters are provided scale - (default 1) set to 2 to cache with twice the fidelity if later scaling up options - (default null) additional parameters for cache logic - see CreateJS somewhere for details also added adjustBounds property for options - set to true to set new bounds and registration point on cached objects with x,y,width,height different than the original this appears to NOT be the default with createjs cache() which keeps the original registration point and bounds automatically fixing this changes lots of things so use the adjustBounds option when needed for instance when caching parts of a container and requiring hit tests or the part to be draggable, etc. margin - (default 0) add or subtract a margin from the bounds eg. margin:10 will make the cache size 10 pixels more on all sides this can be handy when caching objects with borders - that go half outside the natural bounds rtl - (default false) set to true to use right to left willReadFrequently - (default null) set to true if planning on using operations with getImageData() or toDataURL() if you get a warning in the console about willReadFrequently then set this to true setBounds(width||x||Boundary, height||y, null||width, null||height) - overrides CreateJS setBounds() and returns object for chaining If you do not provide any parameters, then the bounds will be reset to the calculated bounds width||x||Boundary - (default null) the width of the bounds - or the x if four parameters are provided or a ZIM Boundary Object {x,y,width,height} - same as CreateJS Rectangle - thanks Joseph Diefenbach height||y - (default width) the height of the bounds - or the y if four parameters are provided width - (default null) the width of the bounds - or null if only the first two parameters are provided height - (default null) the height of the bounds - or null if only the first two parameters are provided getBounds(targetSpace) - overrides CreateJS getBounds() and returns a rectangle with x, y, width height of bounds (not including outside of border) pass in a Container (including Stage) to map rectangle to that coordinate space hasProp(property) - returns true if String property exists on object else returns false clone(recursive) - makes a copy of the shape recursive defaults to true so copy will have own copy of graphics set recursive to false to have clone share graphic property dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), placeReg(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String command - save a previously chained operation as a command then can use the command to change the operation later (see example above) group - used when the object is made to add STYLE with the group selector (like a CSS class) ** bounds must be set first (or width and height parameters set) for these to work ** setting these adjusts scale not bounds and getting these uses the bounds dimension times the scale width - gets or sets the width. Setting the width will scale the height to keep proportion (see widthOnly below) height - gets or sets the height. Setting the height will scale the width to keep proportion (see heightOnly below) widthOnly - gets or sets the width. This sets only the width and may change the aspect ratio of the object heightOnly - gets or sets the height. This sets only the height and may change the aspect ratio of the object draggable - set to true for a default drag() and false for a noDrag() level - gets or sets the level of the object in its parent container (or the stage) - a property for parent.getChildIndex() and parent.setChildIndex() depth - for ZIM VR - the depth used to shift left and right channel and for parallax in VR - also see dep() ZIM Display method blendMode - how the object blends with what is underneath - such as "difference", "multiply", etc. same as CreateJS compositeOperation effects - an object that holds effects added such as blur, glow, shadow, color, multi and alpha - see effect() under ZIM Methods ** the following are convenience Effects that run a ZIM MultiEffect() ** these can use a lot of processing when animating - see Docs for effects() ** batch versions are available too as hueBatch, etc. these will not update the effect until updateEffects() is called on the object hue - the tint of an object between -180 and 180 with 0 being no change saturation - the amount of color of an object between -100 and 100 with 0 being no change brightness - the lightness or darkness of an object between -255 and 255 with 0 being no change contrast - the crispness of an object between -100 and 100 with 0 being no change ALSO see the CreateJS Easel Docs for Shape properties, such as: graphics, x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, mouseEnabled, etc. EVENTS See the CreateJS Easel Docs for Shape events, such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤TOUR😊BITS

VIDS

CLOSE ▲

Bitmap(image, width, height, left, top, scale, style, group, inherit)

Bitmap zim class - extends a createjs.Bitmap DESCRIPTION Makes a Bitmap object from an image source (image, video or canvas). It is best to use the assets and path parameters of ZIM Frame or the loadAssets() method of Frame to preload the image and then use the asset() method to access the Bitmap. See the ZIM Frame class and asset example on the ZIM Frame page of templates. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

new Frame({ready, assets:"logo.jpg"});
function ready() {
   const logo = new Pic("logo.jpg").center(); // logo is a Pic with a bitmap property that is a Bitmap   
   const logo2 = new Pic("logo.jpg").loc(100,100);
}

EXAMPLE

// turn a container of circles into a Bitmap
const circles = new Container(W, H).addTo();
loop(10, ()=>{
   new Circle(rand(200), [pink,green,blue,yellow,purple], dark).center(circles).ble();
});
const pic = new Bitmap(circles).center().drag();
circles.removeFrom();

// previous to ZIM 10.8.0 we needed to use the cacheCanvas:
var pic = new Bitmap(circles.cache().cacheCanvas).center().drag();

EXAMPLE

// fill a Bitmap with noise:
const noise = new Noise();
// empty Bitmap size 200, 200
const bmp = new Bitmap(null,200,200).center();
// we fill the bitmap starting from top left going across in the inner loop,
// then down, then across, etc. until we get to bottom right.
const f = 50; // used to make noise bigger or smaller - see the blob comment below
for (let y = 0; y < bmp.height; y++) {
   for (let x = 0; x < bmp.width; x++) {
      // the noise methods return a number from -1 to 1
      // by adding 1 we get a number between 0 and 2 then divide by 2
      // and we multiply this by 255 to get a number between 0 and 255
      let value = (noise.simplex2D(x, y)+1)/2 * 255;
      // or get blobs by smoothing and adjusting frequency:
      // var value = smoothStep((noise.simplex2D(x/f, y/f)+1)/2, .3,.35) * 255;
      // imageData is four values per pixel
      // the red, green, blue and alpha
      // in one big long array - each value will be constrained to between 0 and 255
      // this i value will increase by 4 each time
      // then we write the same value for red, green, blue to get a shade of grey
      let i = (x + y * bmp.width) * 4;
      bmp.imageData.data[i] = value; // red (0-255)
      bmp.imageData.data[i + 1] = value; // green (0-255)
      bmp.imageData.data[i + 2] = value; // blue (0-255)
      bmp.imageData.data[i + 3] = 255; // alpha (0-255)
   }
}
bmp.drawImageData();

EXAMPLE

// applying filters
new Pic("statue.jpg").effect(new BlurEffect()).center();

EXAMPLE

// getting the color at point(100, 100) on the Bitmap
const bitmap = new Bitmap(new Pic("statue.jpg"));
zog(bitmap.getColorAt(100,100)); // rgba(245,142,37,1)

EXAMPLE

// a Base64 image - with a long list of characters:
const image = "data:image/png;base64,longlistofcharacters";
const logo;
Bitmap.fromData(image, bitmap=>{
   logo = bitmap.center();
   S.update();
});

EXAMPLE

const thumbs = [];
const cols = 5;
const rows = 5;

const image = asset("yourimage.jpg");
const w = image.width/cols;
const h = image.height/cols;
loop(rows, r=>{
   loop(cols, c=>{
      // make Bitmap show a different part of the main image each time
      // note: width, height, left, top
      // NOT x, y, width, height like Container
      // left and top specifiy where in an image
      // to start the picture at 0,0 in the Bitmap
      thumbs.push(new Bitmap(image, w, h, c*w, r*h));
   });
});
const tile = new Tile(thumbs, cols, rows, 0, 0, true).center();

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) image - an HTML image URL (may not load right away - see Frame loadAssets) or as of 10.8.0 a DisplayObject - this will be turned into a cacheCanvas and then the DisplayObject turned back to its previous cached setting width - (default image width or 100) the width of the resulting Bitmap - will potentially crop an image see also height, left and top parameters which allow part of an image to be drawn into the Bitmap and is handy rather than masking to cut up an image into squares for instance height - (default image height or 100) the height of the resulting Bitmap left - (default 0) where on the source image to start the left of the image top - (default 0) where on the source image to start the top of the image scale - if making a Bitmap from a DisplayObject, this will scale the object before it is cached for better resolution the resulting bitmap will be the scaled size style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS keyOut(color, tolerance, replacement) - remove color from Bitmap and a tolerance between 0-1 the default color is "#389b26" which is a medium dark green the default tolerance is .1 - the higher the tolerance the less sensitive the keying process - so more colors will be removed similar to the provided color color and tolerance can be an array of colors and tolerances (or just one tolerance if all are the same) replacement (default clear) a color to replace the keyed out color with or an optional array to match the colors array if an array is used fromData(data, callback) - STATIC method so use the Bitmap class directly: Bitmap.fromData() The callback will receive a reference to the Bitmap after 50ms or 100ms. There is no event for making a Bitmap from base64 for instance - so this will have to do. drawImageData(x, y, sourceX, sourceY, sourceWidth, sourceHeight) - draws the Bitmap's imageData data to the Bitmap NOTE: This is only used when dynamically drawing a Bitmap with data - not for your normal picture See the imageData property which should be set before using the drawImageData() method ZIM calls a putImageData method for the HTML Canvas and then transfers this to the Bitmap See also https://developer.mozilla.org/en-US/docs/Web/API/CanvasRenderingContext2D/putImageData - but let ZIM do the work... Usually just leave the parameters blank x - (default 0) where to start putting the drawing in the x y - (default 0) where to start putting the drawing in the y sourceX - (default 0) where in the imageData to start using the data in the x sourceY - (default 0) where in the imageData to start using the data in the y sourceWidth - (default the width of the imageData) how much width of the data to use sourceHeight - (default the height of the imageData) how much height of the data to use setBounds(width||x||Boundary, height||y, null||width, null||height) - overrides CreateJS setBounds() and returns object for chaining If you do not provide any parameters, then the bounds will be reset to the calculated bounds width||x||Boundary - (default null) the width of the bounds - or the x if four parameters are provided or a ZIM Boundary Object {x,y,width,height} - same as CreateJS Rectangle - thanks Joseph Diefenbach height||y - (default width) the height of the bounds - or the y if four parameters are provided width - (default null) the width of the bounds - or null if only the first two parameters are provided height - (default null) the height of the bounds - or null if only the first two parameters are provided getBounds(targetSpace) - overrides CreateJS getBounds() and returns a rectangle with x, y, width height of bounds (not including outside of border) pass in a Container (including Stage) to map rectangle to that coordinate space cache(width||x, height||y, null||width, null||height, scale, options, rtl, willReadFrequently) - overrides CreateJS cache() and returns object for chaining ** Supports ZIM DUO ** Usually you do not want to cache a Bitmap as it is already a Bitmap ;-) ** But for applying a filter or using a cacheCanvas to get a context, etc. then you might. If you do not provide the first four parameters, then the cache dimensions will be set to the bounds of the object width||x - (default getBounds().x) the width of the chache - or the x if first four parameters are provided height||y - (default getBounds().y) the height of the chache - or the y if first four parameters are provided width - (default getBounds().width) the width of the chache - or null if first two parameters are provided height - (default getBounds().height) the height of the chache - or null if first two parameters are provided scale - (default 1) set to 2 to cache with twice the fidelity if later scaling up options - (default null) additional parameters for cache logic - see CreateJS somewhere for details also added adjustBounds property for options - set to true to set new bounds and registration point on cached objects with x,y,width,height different than the original this appears to NOT be the default with createjs cache() which keeps the original registration point and bounds automatically fixing this changes lots of things so use the adjustBounds option when needed for instance when caching parts of a container and requiring hit tests or the part to be draggable, etc. rtl - (default null) set to true to use Right to Left. willReadFrequently - (default null) set to true if planning on using operations with getImageData() or toDataURL() if you get a warning in the console about willReadFrequently then set this to true getColorAt(x,y,array) - returns the rgba() value at the x and y location - passes array of [r,g,b,a] if array parameter is true hasProp(property as String) - returns true if property exists on object else returns false clone() - makes a copy with properties such as x, y, etc. also copied - also copies file and src properties dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection if this is a cloned bitmap then the original asset("image.png") will still exist unless it is disposed. ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Bitmap methods, such as: on(), off(), dispatchEvent(), etc. PROPERTIES type - holds the class name as a String file - if loaded as an asset this is the file name imageData - data for the pixels stored in a data property of an ImageData object NOTE: This is only used when dynamically drawing a Bitmap with data - not for your normal picture The data property is an one dimensional Array with consecutive red, green, blue, alpha values (0-255) for each pixels eg. 0,0,0,255,255,255,255,255 is a black pixel with 1 alpha and a white pixel with 1 alpha You set this before calling the Bitmap drawImageData() method See also https://developer.mozilla.org/en-US/docs/Web/API/ImageData - but let ZIM do the work group - used when the object is made to add STYLE with the group selector (like a CSS class) ** bounds must be set first (or width and height parameters set) for these to work ** setting these adjusts scale not bounds and getting these uses the bounds dimension times the scale width - gets or sets the width. Setting the width will scale the height to keep proportion (see widthOnly below) height - gets or sets the height. Setting the height will scale the width to keep proportion (see heightOnly below) widthOnly - gets or sets the width. This sets only the width and may change the aspect ratio of the object heightOnly - gets or sets the height. This sets only the height and may change the aspect ratio of the object cacheScale - get the requested scale parameter or if cached, the cache scale draggable - set to true for a default drag() and false for a noDrag() level - gets or sets the level of the object in its parent container (or the stage) - a property for parent.getChildIndex() and parent.setChildIndex() depth - for ZIM VR - the depth used to shift left and right channel and for parallax in VR - also see dep() ZIM Display method blendMode - how the object blends with what is underneath - such as "difference", "multiply", etc. same as CreateJS compositeOperation effects - an object that holds effects added such as blur, glow, shadow, color, multi and alpha - see effect() under ZIM Methods ** the following are convenience Effects that run a ZIM MultiEffect() ** these can use a lot of processing when animating - see Docs for effects() ** batch versions are available too as hueBatch, etc. these will not update the effect until updateEffects() is called on the object hue - the tint of an object between -180 and 180 with 0 being no change saturation - the amount of color of an object between -100 and 100 with 0 being no change brightness - the lightness or darkness of an object between -255 and 255 with 0 being no change contrast - the crispness of an object between -100 and 100 with 0 being no change ALSO see the CreateJS Easel Docs for Bitmap properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, mouseEnabled, etc. EVENTS See the CreateJS Easel Docs for Bitmap events, such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤TOUR😊BITS

CLOSE ▲

Sprite(image, cols, rows, count, offsetX, offsetY, spacingX, spacingY, width, height, animations, json, id, globalControl, spriteSheet, label, frame, style, group, inherit)

Sprite zim class - extends a createjs.Sprite DESCRIPTION A Sprite plays an animation of a spritesheet which is a set of images layed out in one file. You play the Sprite with the run() method. This animates the Sprite over a given time with various features like playing a labelled animation, playing animation series, wait, loop, rewind and call functions. This actually runs a ZIM animation and animates the frames. SEE: https://zimjs.com/interactiveanimation.html https://zimjs.com/interactiveanimation/ https://zimjs.com/spritesheet/ https://zimjs.com/spritesheet/skateboard.html https://codepen.io/danzen/pen/yEKbbR https://codepen.io/danzen/pen/VdXzLV https://zimjs.com/zide/ https://zimjs.com/explore/sidescroller.html (with keyboard) https://zimjs.com/sprite/ (with Free TexturePacker) NOTE A ZIM Sprite handles both an evenly tiled spritesheet - use cols and rows and an un-evenly tiled spritesheet - use the json parameter. The json can come from TexturePacker for instance exported for EaselJS/CreateJS CreateJS Easel Sprite and SpriteSheet docs: https://www.createjs.com/docs/easeljs/classes/Sprite.html https://www.createjs.com/docs/easeljs/classes/SpriteSheet.html You can optionally pass in an existing createjs.SpriteSheet as a parameter. When you do so, all other parameters are ignored. ** JSON hash and JSON array formats are now supported (Phaser formats) ** See https://www.codeandweb.com/free-sprite-sheet-packer NOTE You can use CreateJS gotoAndPlay(), play(), etc. but we found the framerate could not be kept with other animations or Ticker events running. So we recommend using the ZIM Sprite run() method. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// boom.png is a sprite sheet found online
// It has 8 columns and 6 rows that we can visually count
// We can enter a total parameter if it does not end evenly in the grid
// A graphics editor (like Photoshop) could be used to see
// if there is an offset or spacing, etc. and enter those as parameters
// In this case, we do not need to do any of this - just enter the cols and rows

new Frame(FIT, 1024, 768, black, darker, ready, "boom.png", "https://zimjs.org/assets/");
function ready() {

   const animation = new Sprite({
      image:"boom.png",
      cols:8,
      rows:6,
      animations:{mid:[10,20], end:[30,40]} // optional animations with labels
      // see CreateJS SpriteSheet docs for the various animation format as there are a few different ones!
   })
      .center()
      .run(2); // plays the frames of the Sprite over 2 seconds (master time)

   // OR use the label to play the frames listed in animations parameter
   animation.run(1, "mid");

   // OR run a series of animations
   // by passing an array of label objects to the label parameter
   // these each have a time so the master time is ignored
   // they can also have any of the run() parameters
   // if you provide an array of labels, you cannot rewind the overall animation
   animation.run(null, [
      {label:"mid", time:1},
      {label:"end", time:.5, loop:true, loopCount:5, call:function(){zog("loops done");}},
      {startFrame:10, endFrame:20, time:1}
   ]);

   // OR can call a function when done
   animation.run(1, "mid", function(){
      S.removeChild(animation);
      S.update();
   });

   // OR can loop the animation
   animation.run({time:2, loop:true}); // see run() parameters for more
}

EXAMPLE

// using Sprite as a texture atlas - or spritesheet of different images
// see: https://zimjs.com/zapp/Z_FDJXA
// load in assets and path
new Frame({ready, assets:["fruit.png", "fruit.json"], path:"assets/"});
function ready() {
   new Sprite({json:"fruit.json", label:"apple"}).center();
}

EXAMPLE

// Here is an example with CreateJS SpriteSheet data
// robot.png is a sprite sheet made by ZOE based on a Flash swf
// you can also make your own with Photoshop or Texture Packer

F.loadAssets("robot.png");
F.on("complete", ()=>{

   // using ZOE to export swf animation to spritesheet data
   // spritesheet data uses the image name, not the Bitmap itself
   const image = new Pic("robot.png").image;
   const spriteData = {
      "framerate":24,
      "images":[image],
      "frames":[[0, 0, 256, 256, 0, -54, -10], many more - etc.],
      "animations":{}
   };
   const animation = new Sprite({json:spriteData});
   animation.center();
   animation.run(2); // note, duration alternative to framerate
});

// OR
// load in data from external JSON
F.loadAssets(["robot.json", "robot.png"]);
// ... same as before
const animation = new Sprite({json:"robot.json"});
// ... same as before

// see CreateJS SpriteSheet docs for the format of the JSON file
// including various animation formats

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) image - the ZIM Pic() ir ZIM Bitmap() for the spritesheet or use a string filename to a preloaded image file (in Frame or loadAssets()) cols - (default 1) - the columns in the spritesheet rows - (default 1) the rows in the spritesheet count - (default cols*rows) how many total frames in the spritesheet offsetX - (default 0) the pixels from the left edge to the frames offsetY - (default 0) the pixels from the top edge to the frames spacingX - (default 0) the horizontal spacing between the frames spacingY - (default 0) the vertical spacing between the frames width - (default image width) the width including offset and spacing for frames height - (default image height) the height including offset and spacing for frames animations - (default null) an object literal of labels holding frames to play {label:3, another:[4,10]} run(1, "label") would play frame 3 for a second run(1, "another") would play frames 4 to 10 for a second {unordered:{frames:[1,2,3,22,23,24,"anotherLabel",5,6], next:prevLabel}} There are also ways to set speeds - but would recommend dividing into simple labels and using the label series technique available with the run() method json - (default null) a JSON string for a CreateJS SpriteSheet or use a string filename to a preloaded JSON file (in Frame or loadAssets()) If you pass in a json parameter, all other parameters are ignored NOTE: remember that JSON needs quotes around the animation properties above: {"label":3, "another":[4,10]} JSON hash and JSON array formats from TexturePacker are supported as well as the createjs/easeljs format See https://www.codeandweb.com/free-sprite-sheet-packer for instance id - (default randomly assigned) an id you can use in other animations - available as sprite.id use this id in other animations for pauseRun and stopRun to act on these as well globalControl - (default true) pauseRun and stopRun will control other animations with same id spriteSheet - (default null) pass in a CreateJS SpriteSheet to build a Sprite from that label - (default null) pass in a label to stop on initially - to play from a label use the run({label:val}) method frame - (default zimDefaultFrame) specify a Frame other than the default frame style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS run(time, label, call, params, wait, waitedCall, waitedParams, loop, loopCount, loopWait, loopCall, loopParams, loopWaitCall, loopWaitParams, loopPick, rewind, rewindWait, rewindCall, rewindParams, rewindWaitCall, rewindWaitParams, rewindTime, rewindEase, startFrame, endFrame, tweek, id, globalControl) The run() method animates the Sprite over an amount of time Would recommend this method over the CreateJS play() and gotoAndPlay() methods because the framerate for these get overwritten by other S.update() calls With run() you get other nice ZIM animate features as well as follows: Returns the object for chaining Can be paused with pauseAnimate(true) or unpaused with pauseAnimate(false) Can be stopped with stopAnimate() on the Sprite supports DUO - parameters or single object with properties below time (default 1) - the time in seconds to run the animations (the master time) label (default null) - a label specified in the Sprite animations parameter if this is an array holding label objects for example: [{label:"run", time:1}, {label:"stand", time:2}] then the sprite will play the series with the times given and ignore the master time Note: if any of the series has a loop and loops forever (a loopCount of 0 or no loopCount) then this will be the last of the series to run rewind is not available on the outside series but is available on an inside series call - (default null) the function to call when the animation is done params - (default target) a single parameter for the call function (eg. use object literal or array) wait - (default 0) seconds to wait before doing animation waitedCall - (default null) call the function after a wait time if there is one waitedParams - (default null) parameters to pass to the waitedCall function loop - (default false) set to true to loop animation loopCount - (default 0) if loop is true how many times it will loop (0 is forever) loopWait - (default 0) seconds to wait before looping (post animation wait) loopCall - (default null) calls function after loop and loopWait (not including last loop) loopParams - (default target) parameters to send loopCall function loopWaitCall - (default null) calls function after at the start of loopWait loopWaitParams - (default target) parameters to send loopWaitCall function rewind - (default false) set to true to rewind (reverse) animation (doubles animation time) (not available on label series) rewindWait (default 0) seconds to wait in the middle of the rewind rewindCall (default null) calls function at middle of rewind after rewindWait rewindParams - (default target) parameters to send rewindCall function rewindWaitCall (default null) calls function at middle of rewind before rewindWait rewindWaitParams - (default target) parameters to send rewindCall function rewindTime - (default time) set to a time in seconds to adjust the time to rewind rewindEase - (default null) see ease parameter for options for rewind ease note - this goes backwards - so "bounceOut" would happen at the end of the rewind startFrame - (default null - or 0) the frame to start on - will be overridden by a label with frames endFrame - (default null - or totalFrames) the frame to end on - will be overridden by a label with frames tweek - (default 1) a factor for extra time on rewind and loops if needed id - (default randomly assigned) an id you can use in other animations - available as sprite.id use this id in other animations for pauseRun and stopRun to act on these as well globalControl - (default true) pauseRun and stopRun will control other animations with same id pauseOnBlur - (default true) pause the sprite when the window is not seen or set to false to keep playing the sprite pauseRun(state) - pause or unpause the animation (including an animation series) state - (default true) when true the animation is paused - set to false to unpause returns object for chaining stopRun() - stop the sprite from animating setBounds(width||x||Boundary, height||y, null||width, null||height) - overrides CreateJS setBounds() and returns object for chaining If you do not provide any parameters, then the bounds will be reset to the calculated bounds width||x||Boundary - (default null) the width of the bounds - or the x if four parameters are provided or a ZIM Boundary Object {x,y,width,height} - same as CreateJS Rectangle - thanks Joseph Diefenbach height||y - (default width) the height of the bounds - or the y if four parameters are provided width - (default null) the width of the bounds - or null if only the first two parameters are provided height - (default null) the height of the bounds - or null if only the first two parameters are provided getBounds(targetSpace) - overrides CreateJS getBounds() and returns a rectangle with x, y, width height of bounds (not including outside of border) pass in a Container (including Stage) to map rectangle to that coordinate space hasProp(property as String) - returns true if property exists on object else returns false clone() - makes a copy with properties such as x, y, etc. also copied dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Sprite methods, such as: play(), gotoAndPlay(), gotoAndStop(), stop(), advance(), on(), off(), dispatchEvent(), etc. PROPERTIES type - holds the class name as a String id - an id that you can use in other animations to also be controlled by pauseRun() and stopRun() frame - get and set the current frame of the Sprite normalizedFrame - if animations have CreateJS speeds applied, zim handles these by making extra frames for example, if a speed is given of .5 then two frames are made (min resulution is .1) normalizedFrames - an array of total frames after being normalized - really for internal usage totalFrames - get the total frames of the Sprite - read only animations - the animations data with labels of frames to animate running - is the sprite animation being run (includes both paused and unpaused) - read only runPaused - is the sprite animation paused (also returns paused if not running) - read only note: this only syncs to pauseRun() and stopRun() not pauseAnimate() and stopAnimate() note: CreateJS has paused, etc. but use that only if running the CreateJS methods such as gotoAndPlay(), gotoAndStop(), play(), stop() draggable - set to true for a default drag() and false for a noDrag() group - used when the object is made to add STYLE with the group selector (like a CSS class) ** bounds must be set first (or width and height parameters set) for these to work ** setting these adjusts scale not bounds and getting these uses the bounds dimension times the scale width - gets or sets the width. Setting the width will scale the height to keep proportion (see widthOnly below) height - gets or sets the height. Setting the height will scale the width to keep proportion (see heightOnly below) widthOnly - gets or sets the width. This sets only the width and may change the aspect ratio of the object heightOnly - gets or sets the height. This sets only the height and may change the aspect ratio of the object draggable - set to true for a default drag() and false for a noDrag() level - gets or sets the level of the object in its parent container (or the stage) - a property for parent.getChildIndex() and parent.setChildIndex() depth - for ZIM VR - the depth used to shift left and right channel and for parallax in VR - also see dep() ZIM Display method blendMode - how the object blends with what is underneath - such as "difference", "multiply", etc. same as CreateJS compositeOperation effects - an object that holds effects added such as blur, glow, shadow, color, multi and alpha - see effect() under ZIM Methods ** the following are convenience Effects that run a ZIM MultiEffect() ** these can use a lot of processing when animating - see Docs for effects() ** batch versions are available too as hueBatch, etc. these will not update the effect until updateEffects() is called on the object hue - the tint of an object between -180 and 180 with 0 being no change saturation - the amount of color of an object between -100 and 100 with 0 being no change brightness - the lightness or darkness of an object between -255 and 255 with 0 being no change contrast - the crispness of an object between -100 and 100 with 0 being no change ALSO see the CreateJS Easel Docs for Sprite properties, such as: currentFrame, framerate, paused, currentAnimation, currentAnimationFrame, spriteSheet, x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, mouseEnabled, etc. EVENTS See the CreateJS Easel Docs for Sprite events, such as: animationend, change, added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤TOUR😊BITS

VIDS

CLOSE ▲

MovieClip(mode, startPosition, loop, labels, style, group, inherit)

MovieClip zim class - extends a createjs.MovieClip DESCRIPTION A MovieClip adds timelines to a Container. The timelines are animate() zimTween properties. The zimTween property returns a CreateJS Tween object. Primarily made to support Adobe Animate MovieClip export. *Consider this experimental for the moment... NOTE to use animate() on a MovieClip, add the MovieClip to a Container and animate() the Container otherwise the animate() may advance the MovieClip. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const movieClip = new MovieClip();
const circle = new Circle(20, blue).animate({
   props:{scale:3}, time:.1, rewind:true, loop:true
});

// Time is in frames NOT in ms - so 100 frames at the Ticker.framerate 60 fps by default is almost 2 seconds
// To change the Ticker's framerate use setFPS(mobile, desktop) method
// If you use one number then both mobile and desktop are set to that fps.
// The defaults are 60 fps mobile (as of ZIM Cat 04) and 60 fps desktop

movieClip.timeline.addTween(circle.zimTween);
movieClip.play();
movieClip.center();
S.on("stagemousedown", ()=>{
movieClip.paused = !movieClip.paused;
});

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) // from the CreateJS MovieClip docs: https://www.createjs.com/docs/easeljs/classes/MovieClip.html mode - (default "independent") or single_frame (based on startPosition) or synched (syncs to parent) startPosition - (default 0) the start position of the MovieClip (*could not get to work) loop - (default true) set to false not to loop (*did not seem to loop so use loop:true in zim.animate()) labels - (default null) declare label property with position value eg. {explode:20} to use with gotoAndPlay("explode") rather than gotoAndPlay(20) style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS hasProp(property as String) - returns true if property exists on object else returns false setBounds(width||x||Boundary, height||y, null||width, null||height) - overrides CreateJS setBounds() and returns object for chaining If you do not provide any parameters, then the bounds will be reset to the calculated bounds width||x||Boundary - (default null) the width of the bounds - or the x if four parameters are provided or a ZIM Boundary Object {x,y,width,height} - same as CreateJS Rectangle - thanks Joseph Diefenbach height||y - (default width) the height of the bounds - or the y if four parameters are provided width - (default null) the width of the bounds - or null if only the first two parameters are provided height - (default null) the height of the bounds - or null if only the first two parameters are provided getBounds(targetSpace) - overrides CreateJS getBounds() and returns a rectangle with x, y, width height of bounds (not including outside of border) pass in a Container (including Stage) to map rectangle to that coordinate space clone() - makes a copy with properties such as x, y, etc. also copied dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for MovieClip methods, such as: play(), gotoAndPlay(), gotoAndStop(), stop(), advance(), on(), off(), dispatchEvent(), etc. PROPERTIES type - holds the class name as a String draggable - set to true for a default drag() and false for a noDrag() group - used when the object is made to add STYLE with the group selector (like a CSS class) ** bounds must be set first (or width and height parameters set) for these to work ** setting these adjusts scale not bounds and getting these uses the bounds dimension times the scale width - gets or sets the width. Setting the width will scale the height to keep proportion (see widthOnly below) height - gets or sets the height. Setting the height will scale the width to keep proportion (see heightOnly below) widthOnly - gets or sets the width. This sets only the width and may change the aspect ratio of the object heightOnly - gets or sets the height. This sets only the height and may change the aspect ratio of the object draggable - set to true for a default drag() and false for a noDrag() level - gets or sets the level of the object in its parent container (or the stage) - a property for parent.getChildIndex() and parent.setChildIndex() depth - for ZIM VR - the depth used to shift left and right channel and for parallax in VR - also see dep() ZIM Display method blendMode - how the object blends with what is underneath - such as "difference", "multiply", etc. same as CreateJS compositeOperation effects - an object that holds effects added such as blur, glow, shadow, color, multi and alpha - see effect() under ZIM Methods ** the following are convenience Effects that run a ZIM MultiEffect() ** these can use a lot of processing when animating - see Docs for effects() ** batch versions are available too as hueBatch, etc. these will not update the effect until updateEffects() is called on the object hue - the tint of an object between -180 and 180 with 0 being no change saturation - the amount of color of an object between -100 and 100 with 0 being no change brightness - the lightness or darkness of an object between -255 and 255 with 0 being no change contrast - the crispness of an object between -100 and 100 with 0 being no change ALSO see the CreateJS Easel Docs for MovieClip properties, such as: currentFrame, totalFrames, currentLabel, duration, framerate, labels, loop, mode, paused, startPosition, timeline, x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, mouseEnabled, parent, etc. EVENTS See the CreateJS Easel Docs for MovieClip events, such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤TOUR😊

CLOSE ▲

SVGContainer(svg, splitTypes, geometric, showControls, interactive, style, group, inherit)

SVGContainer zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION Parses SVG and adds items to a ZIM Container. Items are created as ZIM Shapes: Circle, Rectangle, Blob, Squiggle. If geometric is true then Circle and Rectangle are used otherwise Blob is used. Items can be accessed using svgcontainer.getChildAt(0), etc. See: https://zimjs.com/svg/ See: https://zimjs.com/explore/svgcontainer.html ALSO see SVG() class under Frame module. An SVG path string can be passed directly to a Squiggle or Blob points parameter and so avoiding the SVGContainer - see ZIM Squiggle and Blob WARNING: this should be considered experimental The idea is that paths from SVG can be made editable in ZIM or animation, dragging, or Label along paths can be accommodated As such, not all SVG features will work - no CSS, Text, Gradients, DropShadows, etc. It is possible that these will be added at some point See also the ZIM svgToBitmap() function under META to get an exact image of the SVG Thank you https://github.com/colinmeinke/svg-arc-to-cubic-bezier for the Arc conversion NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const svgContainer = new SVGContainer(asset("sample.svg")).addTo();

// OR

const svg = `<svg  width="150" height="200" xmlns="h t t p ://www.w3.org/2000/svg">
<path id="lineAB" d="M 0 0 l 150 200" stroke="red" stroke-width="3" fill="none" />
</svg>`;
const svgContainer = new SVGContainer(svg).center();

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) svg - an SVG file loaded into an asset() or SVG text splitTypes - (default false) - set to true to split different types of paths into separate objects geometric - (default true) - set to false to load Rectangle and Circle objects as Blob objects showControls - (default true) set to false to start with controls not showing interactive - (default true) set to false to turn off controls, move, toggle, select, edit - leaving just the shapes style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS processPath(path) - path is an SVG path string - returns a ZIM Blob or Squiggle points array hasProp(property as String) - returns true if property exists on object else returns false clone() - makes a copy with properties such as x, y, etc. also copied dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES svg - a reference to the SVG text type - holds the class name as a String ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS See the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤TOUR😊

CLOSE ▲

Tag(width, height, id, frame, backgroundColor, padding, paddingH, paddingV, expand, style, group, inherit)

Tag zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION Creates a <div></div> with id of id and overlays it on the Canvas with the createjs DOMElement The tag is scaled and positioned with ZIM code and can be filled with any HTML desired Access to the HTML tag is provided with the tag property (so you can use innerHTML or style on this) However a convenience innerHTML and style properties have been added to Tag CSS Styles can be applied to the HTML tag as with any HTML div tag Or use the chainable add() method to add a String of HTML (instead of setting innerHTML) SEE: https://zimjs.com/explore/tag.html NOTE due to the HTML tag being overlayed, the tag.resize() must be called if it is manually scaled or moved (This is called automatically when the stage is resized) NOTE if the tag is placed in a container and the container is removed or added again the tag must be manually removed or added again with tag.removeFrom() or tag.addTo(). This is so ZIM does not have to keep track of HTML tags each time a container is added or removed. NOTE rotation and skewing of Tag is not supported - although might work with custom CSS transformations NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const tag = new Tag(300, 60).center().add("<h1>TITLE TEXT</h1>");
tag.style.color = red;

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) width - (default 250) the width of the div tag height - (default 70) the height of the div tag Note: to set scrollBars use CSS: tag.style.overflow = "auto"; id - (default zimTag_randomNumber) a string id for the HTML div tag. frame - (default the zdf) a reference to the Frame (to scale and position the HTML tag) backgroundColor - (default "rgba(0,0,0,0)") a ZIM Rectangle used as a background padding - (default 10) inner padding between edge of background rectangle and HTML tag paddingH - (default padding) inner horizontal padding between edge of background rectangle and HTML tag paddingV - (default padding) inner vertical padding between edge of background rectangle and HTML tag expand - (default 20) hit area around background to count as a press on Tag - handy for dragging as HTML tag area will override mouse on canvas style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS add(htmlString) - chainable method to add HTML to tag - calling add() again will append see innerHTML property as alternative or to overwrite the innerHTML resize(update) - call the resize event if the scale or position of the tag is changed this will sync the location of the div tag resize() is only needed if the scale or x, y of the tag (or its container) is changed it is not needed for general window resizing - the Tag handles this Note: if the Frame itself changes location in the HTML document, call a F.update() this will then dispatch an update event to the Tag and it will resize() this is not needed if resizing the window or scrolling - see Frame update() method docs update defaults to true - set to false to not update the stage during a resize() hasProp(property as String) - returns true if property exists on object else returns false clone() - makes a copy with properties such as x, y, etc. also copied dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String tagID - the assigned id of the tag tag - the HTML div tag - just a regular HMTL div tag which can be styled innerHTML - the innerHTML property of the tag (so myTag.tag.innerHTML is not needed) background - access to the ZIM Rectangle used as the background frame - get or set the frame - set this if changing frames ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS: See the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Shader(width, height, fragment, uniforms, vertex, dynamic, preCall, postCall, rate, version, canvas, vertexPosition, strip, log, style, group, inherit)

Shader zim class - extends a zim.Bitmap which extends a createjs.Bitmap DESCRIPTION Makes a Bitmap from shader code. The Bitmap will update automatically if set to dynamic (default). Shaders run on the GPU and are very fast for cool visual effects and are also the basis for 3D. For 3D, we recommend using three.js with ZIM and the the Three helper module - overlayed or with TextureActive. BUT - shaders are also commonly used for amazing 2D effects. Also see ShaderOverlay() that overlays the raw WebGL Canvas on ZIM as a Tag() rather than converting to a Bitmap. The best way to see what shaders are about are to look at the many examples on ShaderToy, for instance: https://www.shadertoy.com Many of the shaders from ShaderToy will work in ZIM Shader() with a simple cut and paste. However, ones with multiple channels are currently not supported - but you may be able to add equivilant code. For instance, a picture can be brought into the shader rather than using a channel. There are many more shaders other than in ShaderToy. Shaders have their own coding language called GLSL https://en.wikipedia.org/wiki/OpenGL_Shading_Language ZIM Shader was built for OpenGL 3.0 but other versions may work. This is a very complicated coding world based on C - so do not expect to easily make shaders. Most likely, you will start with copying and perhaps modifying code - but it is not easy. When looking at reference materials, note that ZIM has greatly simplified the requirements So tend to ignore how shaders are set up to run and concentrate on the actual fragment (and sometimes vertex) shader code https://learnopengl.com/Getting-started/Shaders https://thebookofshaders.com/ https://thebookofshaders.com/glossary/ ZIM Shader() abstracts a couple hundred lines of somewhat famously complicated WebGL code. There are three main inputs (beyond width and height) FRAGMENT Shader code that changes the pixel colors. This is the code that is displayed in ShaderToy and is most popular in 2D shaders. Fragment shaders run after Vertex shaders but it is an early parameter because the Vertex shader is usually default. UNIFORMS These are variables that we pass in to the shader. ZIM provides a Uniforms() object for this purpose for easy animate() and wiggle() and component interactivity. The uniforms will automatically be updated by ZIM Shader. The following code will get inserted at the top of the shader code: #version 300 es // version number - see versions parameter precision mediump float; // can reset a different precision if desired uniform vec3 iResolution; // width and height of shader (in pixels) uniform float iTime; // shader playback time (in seconds) uniform float iTimeDelta; // render time (in seconds) uniform float iFrameRate; // shader frame rate (frames per second) uniform int iFrame; // shader playback frame uniform vec4 iMouse; // mouse coordinates x, y (in pixels), down (0/1), click (0/1) uniform vec4 iDate; // year (full), month (0-11), day, time (in seconds from midnight) uniform float iChange; // increases with the rate (parameter or property) of the Shader VERTEX Shader code that changes the verticies (points) of triangles. This defaults to two triangles in a strip that make a rectangle based on the provided width and height. This code will probably not be needed and is not shown in ShaderToy - but can be used in ZIM Shader() TIPS In the shader code, data types matter, are declared and need to match properly - for example: float num = 1.0; int count = 1; vec2 size = vec(0.0, 1.0); Vectors are used a lot and can have 2, 3, or 4 components (like array elements) that we access with x, y, z, w (or rgba or stpq) These can be accessed and adjusted in multiple ways - called "swizzling" (examples from learnopengl.com) vec2 someVec; // has two components vec4 differentVec = someVec.xyxx; // make 4 components from the two components - repeating is fine vec3 anotherVec = differentVec.zyw; // has three components vec4 otherVec = someVec.xxxx + anotherVec.yxzy; // added components together vec2 vect = vec2(0.5, 0.7); // two components - use leading 0 and trailing 0 to keep as float if desired vec4 result = vec4(vect, 0.0, 0.0); // vect will be spread across the first two components vec4 otherResult = vec4(result.xyz, 1.0); // first three components of results are spread across otherResult ShaderToy uses a slightly different format which is converted by ZIM - see the Docs under fragment parameter. A main thing to watch out for is that ShaderToy fragCoord is a vec2 whereas gl_FragCoord (WebGL 1.0) is a vec3 so use gl_FragCoord.xy to match fragCoord Conditionals are often avoided for performance https://theorangeduck.com/page/avoiding-shader-conditionals ZIM Shader() defaults to dynamic which means that it will update. Set the dynamic parameter to false if the shader does not need to update. SEE: https://zimjs.com/016/shaders for a mini-site of shaders in ZIM. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// A simple horizontal gradient shown four ways
// These four ways can be used throughout the examples
// but we will show the rest as the ShaderToy format.

// https://www.shadertoy.com/view/MlK3DK
// iResolution is a default uniform (see Uniforms above)

// VERSION 1 - ShaderToy mainImage(out, in) {} Format
const fragment = `
   void mainImage( out vec4 fragColor, in vec2 fragCoord ) {
      fragColor = mix(vec4(1,1,0,1), vec4(0,1,1,1), fragCoord.x/iResolution.x);
   }
`;
new Shader(W, H, fragment).center();

// VERSION 2 - main() {} - traditional GLSL 3 format
const fragment = `
   out vec4 fragColor;
   void main() {
      vec2 fragCoord = gl_FragCoord.xy; // convert default input vec3 gl_FragCoord to vec2 fragCoord
      fragColor = mix(vec4(1,1,0,1), vec4(0,1,1,1), fragCoord.x/iResolution.x);
   }
`;
new Shader(W, H, fragment).center();

// VERSION 3 - using gl_FragCoord directly
const fragment = `
   out vec4 fragColor;
   void main() {
      fragColor = mix(vec4(1,1,0,1), vec4(0,1,1,1), gl_FragCoord.x/iResolution.x);
   }
`;
new Shader(W, H, fragment).center();

// VERSION 4 - traditional GLSL 1 format (note version param in Shader)
const fragment = `
   void main() {
      gl_FragColor = mix(vec4(1,1,0,1), vec4(0,1,1,1), gl_FragCoord.x/iResolution.x);
   }
`;
new Shader({width:W, height:H, fragment:fragment, version:""}).center();

EXAMPLE

// Animating with the iTime uniform (see default uniforms)
const fragment = `
   void mainImage( out vec4 fragColor, in vec2 fragCoord ) {
      vec2 uv = fragCoord.xy / iResolution.xy;
      vec3 color = 0.5 + 0.5 * cos(iTime + uv.xyx + vec3(0,2,4));
      fragColor = vec4(vec3(color), 1.0);
   }
`;
new Shader(W, H, fragment).center();

EXAMPLE

// https://zimjs.com/016/shader/spiral.html
// loading shader from file - often a glsl extension
// VS Code has a glsl-literal extension that will color syntax shader code

new Frame(FILL, 1024, 768, purple, black, ready, "spiral.glsl");
function ready() {
   new Shader(W, H, asset("spiral.glsl")).addTo();
}

EXAMPLE

// A circle - using rgb() and circle() functions
const fragment = `
   // center will be wiggled outside in ZIM so need a uniform
   uniform vec2 center;

   // prepare a function to convert RGB 0-255 to 0-1
   vec3 rgb(float r, float g, float b) {
      return vec3(r/255.0, g/255.0, b/255.0); // 0-1
   }

   // prepare a function to see if each point (uv) is inside or outside radius
   // from wherever the center of the circle is located (pos - based on center uniform)
   vec4 circle(vec2 uv, vec2 pos, float rad, vec3 color) {
      float d = length(pos - uv) - rad;
      float t = clamp(d, 0.0, 1.0); // threshhold 0 if within radius range from center
      return vec4(color, 1.0 - t); // alpha 0 if outside radius
   }

   void mainImage( out vec4 fragColor, in vec2 fragCoord ) {
      // circle will be 1/2 the height
      float radius = 0.25 * iResolution.y;

      // Background
      vec4 layer1 = vec4(rgb(255.0, 165.0, 0.0), 1.0);

      // Circle
      vec3 red = rgb(255.0, 0.0, 0.0);
      vec4 layer2 = circle(fragCoord.xy, center, radius, red);

      // Blend the two using the alpha of the circle
      fragColor = mix(layer1, layer2, layer2.a);
   }
`;

const width = 500;
const height = 500;

const uniforms = {
   center:[width/2, height/2]
};
const u = new Uniforms(uniforms).wiggle("center_A", width/2, 50,100, 2,4);
new Shader(width, height, fragment, u).center().drag();

EXAMPLE

// a double spiral with speed set by iChange uniform
// which is controlled by the shader rate parameter/property
F.color = purple;
const fragment = `
   void mainImage(out vec4 fragColor, in vec2 fragCoord) {
      // https://www.shadertoy.com/view/cl3BWr
      vec2 uv = 0.5-fragCoord/iResolution.xy;
      uv.y*=iResolution.y/iResolution.x;
      float angle=atan(uv.y, uv.x);
      float stage=sin(-iChange + 10.*(length(uv)*10.+.2*angle));
      fragColor = vec4(mix(.1,.9,smoothstep(-1.,1.,stage/fwidth(stage))));
   }
`;
const shader = new Shader(W, H, fragment).center();

// shader.animate({ // would animate the rate
//     props:{rate:5},
//     time:5,
//     rewind:true,
//     loop:true
// })

const slider = new Slider({
   min:0,
   max:1,
   value:.5,
   barLength:100
}).pos(50,50,RIGHT,BOTTOM).change(()=>{
   shader.rate = Math.exp(slider.value*3)-1;
});
shader.rate =  Math.exp(slider.value*3)-1;

EXAMPLE

// Make a chessboard with a Fragment Shader - from https://medium.com/@banksysan_10088/webgl-checkerboard-42e15490603c
// Change the col and row counts with a Stepper using Uniforms
const fragment = `
   uniform vec2 counts; // cols and rows
   uniform vec4 color1; // rgba
   uniform vec4 color2;

   void mainImage( out vec4 fragColor, in vec2 fragCoord ) {
      vec2 boardCoordinates = floor(fragCoord.xy * counts.xy / iResolution.xy);
      float xMod = mod(boardCoordinates.x, 2.0);
      float yMod = mod(boardCoordinates.y, 2.0);
      float state = mod(xMod + yMod, 2.0);
      fragColor = mix(color1, color2, state);
   }
`;

const start = 8;
const uniforms = new Uniforms({
   counts:[start, start],
   color1:[0,0,0,1],
   color2:[1,1,1,1]
});
const board = new Shader(500, 500, fragment, uniforms, null, false).center(); // false for not dynamic

const stepper = new Stepper({min:1, max:20, value:start}).sca(.8).pos(0,30,CENTER,BOTTOM).change(()=>{
   uniforms.counts_A = stepper.value;
   uniforms.counts_B = stepper.value;
   board.update(); // update needed as dynamic is set to false
   S.update();
});

EXAMPLE

// make a chessboard from a little bw image - from https://medium.com/@banksysan_10088/webgl-checkerboard-42e15490603c
// not sure if this is the easiest or only way to do this...
new Frame(FIT, 1024, 768, light, dark, ready, "board.jpg");
function ready() {
   const vertex = `
      in vec3 vertexPosition;
      out vec3 vPosition; // will get passed to fragment shader
      void main() {
         vPosition = vertexPosition;
         gl_Position = vec4(vertexPosition, 1.0);
      }
   `;

   const fragment = `
      uniform sampler2D TEXTURE; // texture captured here
      in vec3 vPosition;
      void mainImage( out vec4 fragColor, in vec2 fragCoord ) {
         // texture comes in flipped and on different coordinates
         vec2 normalizedCoordinates = (vPosition.xy * vec2(0.5, -0.5)) + vec2(0.5, 0.5);
         fragColor = texture(TEXTURE, normalizedCoordinates); // note this is texture2D() in OpenGL 1
      }
   `;

   const before = function(program, gl, canvas) {
      const textureImageElement = new Pic("board.jpg").image;
      const texture = gl.createTexture();
      gl.bindTexture(gl.TEXTURE_2D, texture);
      gl.texParameteri(gl.TEXTURE_2D, gl.TEXTURE_WRAP_S, gl.CLAMP_TO_EDGE);
      gl.texParameteri(gl.TEXTURE_2D, gl.TEXTURE_WRAP_T, gl.CLAMP_TO_EDGE);
      gl.texParameteri(gl.TEXTURE_2D, gl.TEXTURE_MIN_FILTER, gl.LINEAR);
      gl.texParameteri(gl.TEXTURE_2D, gl.TEXTURE_MAG_FILTER, gl.NEAREST); // nearest as linear will blend
      gl.texImage2D(gl.TEXTURE_2D, 0, gl.RGBA, gl.RGBA, gl.UNSIGNED_BYTE, textureImageElement);
   }

   const board = new Shader(500, 500, fragment, null, vertex, false, before).center();
}

EXAMPLE

// make a chessboard with the Vertex Shader - from https://medium.com/@banksysan_10088/webgl-checkerboard-42e15490603c
// adding only certain squares - add a Fragment Shader with a color to change the default black
const after = function(program, gl, canvas, vertexData) {
   const counts = [8,8];
   const size = {width:2/counts[0], height:2/counts[1]};
   let rowAlternate = true;
   for (let i=-1; i<1; i+=size.width) {
      let cellAlternate = rowAlternate;
      for (let j=-1; j<1; j+=size.height) {
         cellAlternate = !cellAlternate;
         if (cellAlternate) continue; // do not add anything
         const v1 = [i, j];
         const v2 = [i, j + size.height];
         const v3 = [i + size.width, j + size.height];
         const v4 = [i + size.width, j];
         vertexData.push(...v1);
         vertexData.push(...v3);
         vertexData.push(...v2);
         vertexData.push(...v3);
         vertexData.push(...v1);
         vertexData.push(...v4);
      }
      rowAlternate = !rowAlternate;
   }
}

new Rectangle(500,500,white).center();
const board = new Shader({
   width:500,
   height:500,
   dynamic:false,
   postCall:after,
   strip:false // use TRIANGLES not TRIANGEL_STRIP (might not show on iOS)
}).center();

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) width - (default 500) the width of the Shader this can be retrieved in the Shader code as iResolution.x height - (default 500) the height of the Shader this can be retrieved in the Shader code as iResolution.y fragment - provide the code as a string for the Fragment Shader which affects the pixels This can be passed in as a variable with `` for multiline or preloaded as an asset and read using asset("filename.glsl") ShaderToy uses "void mainImage(out vec4 fragColor, in vec2 fragCoord) {}" But basic GLSL uses main(), fragColor for OUT, and gl_FragCoord as IN ZIM converts the ShaderToy so that you can use either. To see the final Fragment Shader in the console set the Shader() log parameter to true Here is the default Fragment Shader for OpenGL 3 (verion 1 is slightly different): // START AUTO - do not include below #version 300 es precision mediump float; // plus all the default Uniforms mentioned above // END AUTO - do not include above void main() { vec2 fragCoord = gl_FragCoord.xy; // a 2D variable of IN coordinates gl_FragColor = vec4(0.0, 0.0, 0.0, 1.0); // OUT variable } uniforms - (default null) a ZIM Uniform object or an object literal {} with uniform names and values (use arrays for vectors) if a {} is passed in, a Uniform object will be made and in either case available as the uniform property of the Shader the uniform properties match the {} properties except any array is made into individual properties to make animation easier For instance, passing in: { alpha:.5, position:[100,200] } would result in three properties on the uniform object: shader.uniform.alpha // .5 shader.position_A // 100 shader.position_B // 200 These could be animated or wiggled like: shader.uniform.animate({position_A:300}, 2); // animate position.x inside the shader shader.wiggle("alpha", .5, .1, .4, 1, 2); // wiggle alpha inside the shader - probably on the "z" or "a" component of a color vec4 vertex - provide the code as a string for the Vertex Shader which affects the points this will be used less with 2D outputs - see the Fragment Shader parameter for similar details To see the final Fragment Shader in the console set the Shader() log parameter to true Here is the default Vertex Shader for OpenGL 3 (verion 1 is slightly different): // START AUTO - do not include below precision mediump float; // plus all the default Uniforms mentioned above vec2 fragCoord = gl_FragCoord.xy; // a 2D variable of IN coordinates // END AUTO - do not include above void main() { gl_Position = vec4(vertexPosition, 0.0, 1.0); // OUT variable } dynamic - (default true) set to false to not update the uniforms of the shaders constanty preCall - (default null) a function to run just before before gl.useProgram(program); and after createProgram(gl, vertex, fragment) the function will receive (program, gl, canvas) arguments to its parameters postCall - (default null) a function to run after createProgram(gl, vertex, fragment) and gl.useProgram(program); the function will receive (program, gl, canvas, vertexData) arguments to its parameters Note: the vertexData is a [] and can be filled in this function if it is not filled then it defaults to two triangles making a rectangle of width and height Also see the strip parameter below rate - |ZIM VEE| (default 1) set the rate of the iChange uniform. many shaders use iTime to animate the effect. Instead, you can use an iChange uniform and setting a rate of 2 will animate it twice as fast, .5 half as fast, etc. this can be set with a ZIM VEE value and can also be adjusted with the rate property of the shader (this could also be done with the iFrameRate uniform but then the Ticker.setFPS() would have to be changed) version - (default "#version 300 es") string version to add to top of shader code - would suggest leaving this as default use "" for lower versions. Higher versions probably will work using the # canvas - (default a canvas tag) a canvas tag will be created for the Shader or pass in an existing canvas tag this will be available as the canvas property vertexPosition - (default "vertexPosition") the variable name for the vertexPosition strip - (default true) use gl.TRIANGLE_STRIP - set to false to use gl.TRIANGLES for vertex data Note: could not get gl.TRIANGLES working on iOS (iPad2) strip:true will use vertexData = [1.0, 1.0, -1.0, 1.0, 1.0, -1.0, -1.0, -1.0]; // two triangles strips strip:false will use: vertexData = [-1.0, -1.0, 1.0, 1.0, -1.0, 1.0, 1.0, 1.0, -1.0, -1.0, 1.0, -1.0]; // two triangles in either case, if vertexData is set in the postCall then this overrides the default vertexData above. log - (default false) - set to true to log the vertex and fragment shaders in the console - in that order style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS update() - update the shader - not needed if dynamic is true (default) clone() - makes a copy of the Shader dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Bitmap (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), uncache(), updateCache(), dispatchEvent(), etc. PROPERTIES type - holds the class name as a String dynamic - get or set whether the shader is dynamic rate - |ZIM VEE| get or set the rate of the iChange uniform - can use for animating the shader - see also the rate parameter canvas - the canvas for the shader gl - the WebGL context for the canvas for the shader uniforms - the uniforms object stored on the shader - use uniforms.obj for the original object literal uniforms holds all the properties as individual properties vectors (arrays) are accessed as vector_A, vector_B, vector_C, vector_D see ZIM Uniforms for more info fragment - the fragment shader - also see the log parameter to view final shaders in console vertex - the vertex shader program - the WebGL program with the shaders ticker - the ZIM Ticker that runs the updates ALSO see ZIM Bitmap for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Bitmap properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseEnabled, parent, etc. EVENTS See the CreateJS Easel Docs for Bitmap events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

ShaderOverlay(width, height, fragment, uniforms, vertex, dynamic, preCall, postCall, rate, version, canvas, vertexPosition, strip, log, style, group, inherit)

ShaderOverlay zim class - extends a zim.Tag DESCRIPTION ShaderOverlay is a ZIM Tag() that holds a canvas with a shader from provided shader code. This is the same as ZIM Shader() so see the Docs for Shader above. The only difference is that the shader canvas is placed in a Tag() so overlayed on ZIM. This can also be underlayed by setting the z-index of the tag. The advantage of a tag is that the canvas is used directly with its WebGL context rather than passed into a Bitmap() to be displayed on the Canvas2D context. The disadvantage is that the tag can only be overlayed or underlayed and not be in the normal ZIM canvas container levels. Also, if manually adjusting, a shaderOverlay.update() might need to be called. But for the most part, the Tag() should take care of it - for instance, resizing the window. See ZIM Tag() for more tips regarding update(). EXAMPLE

new Frame(FILL, 1024, 768, clear, clear, ready);
function ready() {
   const fragment = `
      void main() {
         vec2 uv = gl_FragCoord.xy / iResolution.xy;
         vec3 color = 0.5 + 0.5 * cos(iTime + uv.xyx + vec3(0,2,4));
         gl_FragColor = vec4(vec3(color), 1.0);
      }
   `;
   const shader = new zim.ShaderOverlay(W, H, fragment).center();
   shader.tag.style.zIndex = -50; // put shader beneath stage

   const list = new List({
      backdropColor:faint,
      bgColor:white.toAlpha(.5),
      rollBgColor:dark.toAlpha(.5),
      selectedBgColor:dark.toAlpha(.8),
   }).sca(1.5).center();
   F.on("resize", ()=>{list.center();});
} // end ready

CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

makeShader(DS, width, height, fragment, uniforms, vertex, dynamic, preCall, postCall, rate, version, canvas, vertexPosition, strip, log, tether)

makeShader function - used internally only DESCRIPTION This is the general code to make a Shader in JS. It is used by Shader() and ShaderOverlay(). It is included in the docs to more easily reference the code. See Shader() and ShaderOverlay() for more information. The code is a compilation of MDN Shader instructions and organization by David Banks https://developer.mozilla.org/en-US/docs/Web/API/WebGLShader https://medium.com/@banksysan_10088/webgl-checkerboard-42e15490603c With a portion in the middle of ZIM code to handle uniforms, etc. primarily to match default uniforms at ShaderToy https://www.shadertoy.com/ Introduced in ZIM 016 CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Uniforms(obj)

Uniforms zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION Makes an object to hold uniforms for a ZIM Shader() or ShaderOverlay(). (This is not to be used as a display object despite extending a Container) Uniforms are variables to pass in to the shader code. They are often arrays to make vectors and array values are hard to animate. ZIM Uniforms stores each array element as an individual property. Uniforms extends a Container giving it animate() and wiggle() methods. This means we can animate or wiggle any of the Uniforms properties and ZIM will update the shader if the shader's dynamic parameter or property is true. HOW IT WORKS An object literal {} is passed into the Uniforms(obj). This will have all the uniform names and values. If the value is an array that is used to set vector uniforms, then ZIM splits this up so that each array value has a property called the name_A, name_B, name_C, name_D as needed. There are only ever 2, 3, or 4 component vectors. If the value is a single value, then it is stored as the name alone. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const uniforms = new Uniforms({
   age:20,
   color:[.5, .2, .8, 1]
});

// the the Uniforms object will have:
zog(uniforms.age);      // 20
zog(uniforms.color_A);  // .5
zog(uniforms.color_B);  // .2
zog(uniforms.color_C);  // .8
zog(uniforms.color_D);  // 1

uniforms.wiggle("color_A", .5, .2, .4, 1, 2); // would wiggle the red

// inside the shader they must be declared if they are to be used
// uniform float age;
// uniform vec4 color;

const fragment = `
   uniform vec4 color; // declare our uniform - only using color, age will be ignored
   void mainImage( out vec4 fragColor, in vec2 fragCoord ) {
      fragColor = color; // gl_FragColor or fragColor is the default output
   }
`;

new Shader(500, 500, fragment, uniforms).center().drag(); // draggable animated color box

PARAMETERS obj - the object literal {} with uniform properties and values METHODS update() - update the uniforms as long as dynamic is true or the update() method of the shader is called this is handled automatically by the shader update() so may as well call update() on shader PROPERTIES type - holds the class name as a String obj - the original object literal - its properties get updated as the uniforms properties are updated *** Each property in the object literal with arrays being split into a property for each element in the format name_A, name_B, name_C, name_D as dicted by the number of elements in the value for the property {year:2024, dimensions:[200,500]} would get: uniforms.year = 2024 uniforms.dimensions_A = 200 uniforms.dimensions_B = 500 CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

CustomShape(x, y, w, h)

CustomShape zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION Used internally to make ZIM Shapes - Circle, Rectangle, Triangle, etc. Holds the following properties in common: color, colorRange, borderColor, borderWidth, thickness, dashed, dashedOffset, corner Holds the following functions in common: (most methods applied through ZIM 4TH methods) setColorRange, cloneAll(), linearGradient (depreciated), radialGradient (depreciated) NOTE this is NOT a generic Shape - see the zim.Shape() class for that. EXAMPLE

// would recommend just extending a Container() for custom shapes / objects
// unless properties listed above are needed over multiple projects
// but it could be done with matching various private properties, etc.
// also note that a Blob can make just about any shape...
const Smile = function(color) {
   this.super_constructor(-100,-20,200,70);
   this._color = color;
   this.shape = new Shape().addTo(this);
   // this is an example of how ZIM changes shape color
   // will need to go through and do similar things for borderColor, etc.
   this.colorCommand = this.shape.f(this._color).command;
   this.shape.mt(-100,-20).bt(0,70,0,70,100,-20);
}
extend(Smile, CustomShape);

const s = new Smile(red).center();
timeout(1, function () {
   s.color = blue;
   S.update();
});

SEE - ZIM shapes for details. CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Circle(radius, color, borderColor, borderWidth, dashed, percent, percentClose, percentArc, strokeObj, style, group, inherit)

Circle zim class - extends a zim.CustomShape which extends a zim.Container which extends a createjs.Container DESCRIPTION Makes a circle shape inside a container. The registration and origin will be the center. NOTE mouseChildren is turned to false for all zim Shape containers. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

new Circle(50, red).center();

// or with 10 pixel grey stroke
const circle = new Circle(50, red, grey, 10).center();

// change the color of the circle to a radial gradient fill
circle.color = new RadialColor([yellow,green], [0, .7], 0, 0, 20, 0, 0, 50);

// make a half circle - or any percent of a circle
new Circle({radius:200, color:pink, percent:50}).center();

EXAMPLE

const circle = new Circle({min:10, max:50}, [red, green, blue]).center();
interval(1, ()=>{
   // apply a different values picked from original ZIM VEE values
   zog(circle.veeObj)
   circle.radius = Pick.choose(circle.veeObj.radius); // or zik(circle.veeObj.radius)
   circle.color = Pick.choose(circle.veeObj.color);
   S.update();
});

VIDS

CLOSE ▲

Rectangle(width, height, color, borderColor, borderWidth, corner, dashed, strokeObj, scaleDimensions, style, group, inherit)

Rectangle zim class - extends a zim.CustomShape which extends a zim.Container which extends a createjs.Container DESCRIPTION Makes a rectangle shape inside a container. The registration and origin will be top left corner. NOTE mouseChildren is turned to false for all zim Shape containers. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

new Rectangle(200, 100, blue).center();

// or with rounded corners
new Rectangle({width:200, height:100, color:blue, corner:20}).center();

// or with individual corners
new Rectangle({width:100, height:100, corner:[50,0,50,0]}).center();

// or with skewed corners
// this will have a radius of 50 in the horizontal but 20 in the vertical
new Rectangle({width:100, height:100, corner:[50,20]}).center();

// or a combination of corner values and skewed values
new Rectangle({width:100, height:100, corner:[0, 50, [10,50], [40, 20]}).center();

// or with 2 pixel white stroke
new Rectangle(200, 100, blue, white, 2).center();

// fill the rectangle with a Bitmap fill assuming icon has been loaded - not the image property
new Rectangle(200, 300, new BitmapColor(new Pic("icon.png"))).center();

VIDS

CLOSE ▲

Triangle(a, b, c, color, borderColor, borderWidth, corner, center, adjust, dashed, strokeObj, style, group, inherit)

Triangle zim class - extends a zim.CustomShape which extends a zim.Container which extends a createjs.Container DESCRIPTION Makes a triangle shape inside a container using three line lengths. Passing one length parameter makes an equilateral triangle. Passing two length parameters makes an isosceles triangle. Passing -1 as the middle or last length parameter makes a 90 degree triangle. NOTE mouseChildren is turned to false for all zim Shape containers. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

new Triangle(200, null, null, "green").center();

// all three sides specified - tall pointy triangle with yellow stroke of 10 pixels
new Triangle(100, 200, 200, "green", "yellow", 10).center();

// here we adjust so rotation looks better
const tri = new Triangle({a:200, color:"green", adjust:30})
   .center()
   .animate({obj:{rotation:360}, time:3, ease:"linear", loop:true});

// here we fill the triangle with a linear gradient color
tri.color = new GradientColor([green, blue ,green], [.2, .5, .8], 0, 0, tri.width, 0);

VIDS

CLOSE ▲

Poly(radius, sides, pointSize, color, borderColor, borderWidth, dashed, strokeObj, flat, style, group, inherit)

Poly zim class - extends a zim.CustomShape which extends a zim.Container which extends a createjs.Container DESCRIPTION Makes a regular polygon with radius like a Circle. The number of sides can be set as well as a pointSize that will make star-like shapes The registration and origin will be the center. NOTE mouseChildren is turned to false for all zim Shape containers. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

new Poly(200, 5, 0, pink).center(); // pentagon

new Poly(200, 5, .6, pink).center(); // five point star

CLOSE ▲

Line(length, thickness, color, startHead, endHead, dashed, strokeObj, lineType, lineOrientation, curveH, curveV, points, startLength, endLength, style, group, inherit)

Line zim class - extends a zim.CustomShape which extends a zim.Container which extends a createjs.Container DESCRIPTION Makes a straight line with a length and thickness. See also ZIM Squiggle() with points:[[0,0], [100,0], etc. with Bezier handles See also ZIM Shape() for custom lines, curves, etc. The registration and origin will be at the start point at the left. Start point and end point can be adjusted in various ways to accommodate animation, etc. NOTE mouseChildren is turned to false for all zim Shape containers. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

new Line(500).center(); // centered line

EXAMPLE

new Line({points:[[0,0],[100,0],[100,100],[200,100]]}).center(); // over, up, over, etc.
// or with quadratic curves:
// 100,0 is control point to x,y of 100,50
new Line({points:[[0,0],[100,0,100,50],[100,100,200,100]]}).center(); // over, up, over
// or with bezier curves:
// 100,0 is first control point, 100,0 is second control point and 100,50 is final point
new Line({points:[[0,0],[100,0,100,0,100,50],[100,100,100,100,200,100]]}).center(); // over, up, over

CLOSE ▲

Squiggle(color, thickness, points, length, controlLength, controlType, lockControlType, showControls, lockControls, handleSize, allowToggle, move, dashed, onTop, circleColor, circleBorderColor, stickColor, stickThickness, selectColor, selectPoints, editPoints, interactive, strokeObj, style, group, inherit)

Squiggle zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION Makes a squiggly line with a number of points. The points have Bezier controls - little handles that change the shape of the line. The type of control can be specified overall and individually - and can be hidden or shown The type of control can be changed by double clicking the point - colors of the handles will change Points can be added by clicking on the line or removed by SHIFT clicking a point. CTRL Z will undo adding or removing a point The shape of the line can be recorded with the recordData() method and recreated with the setData() method The Squiggle is set by default to show and hide controls when clicked It is also draggable by default when the controls are showing It can be set to copy with a shift click SEE: https://www.youtube.com/watch?v=P2hDe5JCINY for Blob and Squiggle Basics SEE: https://zimjs.com/paths/ to make points for Blob and Squiggle MULTIPLE SELECT Multiple points can be selected with the CTRL key held and then dragged or moved with the keyboard arrows (moves 10 pixels with shift key down) NOTE mouseChildren is turned to false for all zim Shape containers. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

new Squiggle().center(); // makes a line with default 4 points with Bezier controls

EXAMPLE

new Squiggle({points:2, controlType:"none"}).pos(100,100); // makes a diagonal straight line that is editable

EXAMPLE

// Animate along a Squiggle
// see https://zimjs.com/explore/squiggleAnimate.html for more
const path = new Squiggle().center();
new Circle(10, red).addTo().animate({path:path}, 1);

EXAMPLE

// there are so many examples for Blob and Squiggle
// see https://www.youtube.com/watch?v=P2hDe5JCINY

// Add a new second smaller part to the Squiggle
// reverse points from right to left and animate along Squiggle
const s1 = new Squiggle({showControls:false}).center();
const s2 = new Squiggle()
.transformPoints("scale", .5)
.transformPoints("x", s1.width);
s.appendPoints(s2.points).reversePoints();
new Circle(10).addTo().animate({path:s1}, 5);

EXAMPLE

// split Squiggle and change color of second part
const s1 = new Squiggle().center();
const s2 = s1.splitPoints(2);
s2.color = red;

EXAMPLE

// split Blob into Squiggles
const b1 = new Blob().center();
const s1 = b1.makeSquiggle(0).loc(b1);
const s2 = s1.splitPoints(2).loc(b1);
s2.color = red;
b1.removeFrom();

// // and put back again
// s1.appendPoints(s2.points, "mirror");
// const b2 = s1.makeBlob().loc(s1);
// b2.color = blue;
// b2.borderColor = null;
// s1.removeFrom();
// s2.removeFrom();

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports VEE - parameters marked with ZIM VEE mean a zim Pick() object or Pick Literal can be passed Pick Literal formats: [1,3,2] - random; {min:10, max:20} - range; series(1,2,3) - order, function(){return result;} - function ** supports OCT - parameter defaults can be set with STYLE control (like CSS) color - |ZIM VEE| (default green) the line color as any CSS color including "rgba()" for alpha thickness - (default 2) the thickness of the line in pixels points - (default 5) a number of points to start with to make the shape OR an SVG path like: points:"M0,129.5c22,0,40-31,40-41c0-8-3.2-13-10-13" etc. (also see SVGContainer) OR an array of points as follows - https://zimjs.com/paths has a tool to make points in this format [[controlX, controlY, circleX, circleY, rect1X, rect1Y, rect2X, rect2Y, controlType], [etc]] controlX and controlY - the x and y location of the control Container which holds the point circle and the two control rectangles rect1X, rect1Y, rect2X, rect2Y - (default based on controlLength) the x and y location of the control rectangles relative to the control location circleX and circleY - (default 0) the x and y location of the circle relative to the control location (usually 0, 0) controlType - (default main controlType parameter or "straight" if not controlType parameter) the point's controlType "none", "mirror", "straight" or "free" custom points will start with approximateBounds() called but approximateBounds() must be called manually anytime afterwards when new bounds are desired. length - (default 300) the default length of line used to create the squiggle (also specifies the squiggle's bounds(0, 0, length, thickness)) controlLength - |ZIM VEE| (default radius*numPoints/4) specify a Number to override the calculated default controlType - (default "straight") one of four String values as follows: none - there are no control rectangles (they are actually set at 0,0). This makes a corner at the circle point. mirror - the control rectangles reflect one another about the point circle - lengths are kept even straight - the control rectangles keep a straight line through the point circle but length is independent free - the control rectangle moves independently from the other control rectangle ** The controlType can be specified for each point - see the points parameter ** The controlType can be changed by doubleClicking the point circle to cycle through the controls in the order above - unless the lockControlType is set to true lockControlType - (default false) set to true to disable doubleClicking of point circles to change controlType showControls - (default true) set to false to start with controls not showing - can change this after with controlsVisible property or showControls() and hideControls() methods lockControls - (default false) set to true to lock the editing of controls - can't move the points or handles - but can see them if showControls is set to true handleSize - (default 20 mobile 10 for non-mobile) the size of control boxes and affects the circles too proportionally allowToggle - (default true) set false to let turn off clicks showing and hiding controls move - (default true) set to false to disable dragging when controls are showing can also set to "always" to allow movement when controls are not showing dashed - (default false) set to true for dashed border (if borderWidth or borderColor set) or set to an array of line size then space size, etc. eg. [20, 10] is 20 line and 10 space repeated and [20,100,50,10] is 20 line, 100 space, 50 line, 10 space, etc. onTop - (default true) set to false to not bring shape to top of container when dragging circleColor - (default light) set the circle color of the controls circleBorderColor - (default dark) set the circle border color of the controls stickColor - (default darker) set the stick color of the controls stickThickness - (default 1) set the stick thickness of the controls selectColor - (default white) the color of the selected circle or rectangle of the controls if selectPoints is true selectPoints - (default true) set to false to not allow point controls to be selected for keyboard control editPoints - (default true) lets user add points by pressing on shape path or remove points by shift click or hold set to "anywhere" to let users add points anywhere - will add points with controlType:"none" set to false to not allow adding or removing points with shift click or hold interactive - (default true) set to false to turn off controls, move, toggle, select, edit - leaving just the shape strokeObj - (default {caps:"butt", joints:"miter", miterLimit:10, ignoreScale:false}) set to adjust stroke properties caps options: "butt", "round", "square" or 0,1,2 joints options: "miter", "round", "bevel" or 0,1,2 miterLimit is the ration at which the mitered joint will be clipped ignoreScale set to true will draw the specified line thickness regardless of object scale style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS approximateBounds(num, showPoints, margin) - update the bounds based on a Rectangle that surrounds the number of points (default 80) distributed around the object path set showPoints to true to draw little dots on points margin increases (or if negative decreases) the bounds on all sides by the margin use outline() after object has been added to the stage to see the bounds Squiggles with custom points will start with approximateBounds() called but approximateBounds() must be called manually anytime afterwards when new bounds are desired. addPoint(percent, controlType) - add a point at a percent (100) of the total curve this is handy to make path have the same number of points for animate() path tweens controlType can be as specified in main points parameter returns index of new point addPoints(num, controlType, startPoint, spread, dataOnly, points, even) - add num points between existing points controlType can be as specified in main points parameter specify a startPoint to add points between the startPoint and the next point (one segment of points) spread (default false) set to true to spread points evenly around path rather than evenly between segments dataOnly and points are used internally returns object for chaining removePoint(index) - remove a point at the specified index interpolate(num, startPoint, spread, points, even) - get point data {x,y} for existing points and num (default 1) points inbetween used with hitTestPath() and animate() drag on path - also add points (note add points does not use even:true) specify a startPoint to get points between the startPoint and the next point (one segment of points) spread (default false) set to true to spread number of points around path rather equal number between segments points (default all points) the points to work with in the same format as the points property even (default false) set to true to use zim.Bezier() with even turned on for even percentage distribution returns an array of point objects with x, y properties and an r property for ratio of distance along path recordData(toJSON) - returns an object with x, y, points, color, borderColor, borderWidth, move, toggle, controls PROPERTIES to be used with setData() method if toJSON (default false) is set to true, the return value is a JSON string the points data comes from the points property setData(data, fromJSON) - sets the properties to match the data object passed in - this should come from recordData() if fromJSON (default false) is set to true, it will assume a JSON string is passed in as data the points data is parsed with the set setPoints() so the number of points should be the same returns object for chaining getPoints(popup) - returns an array with the same format as the points parameter - or can just use points property - also recordPoints() for backwards compatibility popup - (default false) set to true to open a zim Pane (squiggle.pane) with the points in a zim TextArea (squiggle.textArea) (click off to close) NOTE: the TextArea output uses JSON.stringify() - to add the points to the points parameter of the Squiggle use JSON.parse(output); NOTE: using zog(JSON.stringify(squiggle.recordData()))... the console will remove the quotes from the controlTypes so those would have to be manually put back in before parse() will work also see points property setPoints(data) - sets the Squiggle points to the data from getPoints this does not remake the Squiggle but rather shifts the controls so the number of points should be the same also see points property changeControl(index, type, rect1X, rect1Y, rect2X, rect2Y, circleX, circleY, update) - change a control type and properties at an index accepts ZIM DUO normal parameters or configuration object literal with parameter names as propterties passing in null as the index will change all points to the specified properties the update parameter defaults to false so set to true to show update or call update() below this is so multiple changes can be batched before calling update - for instance when animating blobs. transformPoints(transformType, amount, x, y, approximateBounds) - scale, rotate, move points without affecting controls or borderWidth - returns object for chaining transformType - String any of: "scale", "scaleX", "scaleY", "rotation", "x", "y" amount - the amount to transform x, y - (default 0, 0) the x and y position to transform about approximateBounds defaults to true - set to false to not call approximateBounds after transforming points reversePoints() - reverse the order of the points this also swaps each rectangle in the Bezier controls also see the Code module for reversePoint(points) function to operate on data points in Squiggle format appendPoints(points, controlType) - add points at end of points - updates Squiggle it is assumed that the first point of the new points is in the same place as the last point of the Squiggle by default these will transfer control types but can override with controlType this will not have immediate effect but will be triggered when the joining point handle is moved prependPoints(points, controlType) - add points at start of points - updates Squiggle it is assumed that the last point of the new points is in the same place as the first point of the Squiggle by default these will transfer control types but can override with controlType this will not have immediate effect but will be triggered when the joining point handle is moved splitPoints(index) - breaks the Squiggle into two Squiggles at the index (length / 2) the original Squiggle is the first Squiggle returns a reference to the second Squiggle makeBlob(controlType, mergeDist) - makes a new Blob from the Squiggle returns the new Blob - the Squiggle remains unchanged so may need to remove it controlType (default "free" if not merged and "mirror" if merged) controlType for the joined end points - also see mergeDist below this will not change the control sticks until their handles are dragged mergeDist (default 5) merges overlapping end points (within this pixel distance) update(normalize) - update the Squiggle if animating control points, etc. would do this in a Ticker set normalize (default false) to true to use pointsAdjusted for rotated and scaled points and if animating along the path after setting rotation or scale on point just leave out if only animating points showControls() - shows the controls (and returns squiggle) also see controlsVisible property hideControls() - hides the controls (and returns squiggle) also see controlsVisible property toggle(state - default null) - shows controls if hidden and hides controls if showing (returns the object for chaining) or pass in true to show controls or false to hide controls traverse(obj, start, end, time) - animates obj from start point to end point along path - thanks KV for the thought! set start point greater than end point to traverse backwards will dispatch a "traversed" event when done setColorRange(color1, color2) - set a color range for shape - used by colorRange property - returns obj for chaining if one color is used, the current color is used and color1 is the second color in the range getPointAngle(index) - gets the angle made by the tangent at the index provided getSegmentPoint(point1, point2) - returns an array of [point1, controlPoint1, controlPoint2, point2] used internally for animating to path and adding removing Bezier points getAdjacentSegmentData(index) - returns an array of two arrays: The first is an array of cubic Bezier points for segments adjacent and including the provided point index each element is in the form of [point1, controlPoint1, controlPoint2, point2] The second is an array of starting point indexes for the segments that were tested used internally to drag an animation along the path getCurvePoint(ratio, segmentRatios, segmentPoints, getAngle) gets a point along whole curve at the ratio (0-1) provided along with x and y values, the point has a z value that is the index of the squiggle point before the calculated point if the getAngle parameter is true (default false) the point also has an angle property which is the angle of the tangent at the point ratio is 0-1 with 0 being at the first point and 1 being at the end of the last segment segmentRatios and segmentPoints will be calculated if not provided used internally for animating along the path - if lockControls is true, only animate will precalculate these values linearGradient([colors],[ratios], x0,y0, x1,y1) - shortcut to thicknessCommand linearGradient method (see properties below) radialGradient([colors],[ratios], x0,y0,radius0, x1,y1,radius1) - shortcut to thicknessCommand radialGradient method (see properties below) cache(see Container docs for parameter description) - overrides CreateJS cache() and returns object for chaining Leave parameters blank to cache bounds of shape (plus outer edge of border if borderWidth > 0) hasProp(property as String) - returns true if property exists on object else returns false clone(exact, commands) - makes a copy of the object exact (default false) ZIM VEE (Pick) values are active in clones unless exact is set to true For instance, if the object's color is [blue, green] then its clone might be blue or green - which could be different than the original If exact is set to true then the clone will be the color of the original object commands (default false) makes clones with current color and borderColor commands of object dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String shape - gives access to the shape of the squiggle color - get and set the fill color colorRange - if setColorRange() is used, the colorRange is a ratio (0-1) between the colors setting the colorRange will change the color property of the shape for instance, shape.setColorRange(blue, pink) then shape.colorRange = .5 will set the color of the shape to half way between blue and pink shape.animate({color:red}, 1); is a shortcut to animate the colorRange shape.wiggle("colorRange", .5, .2, .5, 1, 5) will wiggle the colorRange circleColor - get or set the circle color of the controls - requires an update() to see changes circleBorderColor - get or set the circle borderColor of the controls - requires an update() to see changes stickColor - get or set the stickColor - requires an update() to see changes colorCommand - access to the CreateJS fill command for bitmap, linearGradient and radialGradient fills eg. shape.colorCommand.linearGradient([green, blue ,green], [.2, .5, .8], 0, 0, shape.width, 0) See: https://www.createjs.com/docs/easeljs/classes/Graphics.Fill.html thickness - get and set the stroke size in pixels thicknessCommand - access to the CreateJS stroke style command (width, caps, joints, miter, ignoreScale) See: https://www.createjs.com/docs/easeljs/classes/Graphics.StrokeStyle.html dashed - get and set the dashed - use true / false or an array (see dashed parameter) dashedOffset - get and set the offset of the dash (50 default) - can animate this property for a marquee effect dashedCommand - access to the CreateJS stroke dashed command (segments, offset) see https://www.createjs.com/docs/easeljs/classes/Graphics.StrokeDash.html num - get the number of points - to set, use the points property points - get or set the points array of the Squiggle in the same format as the points parameter: [[controlX, controlY, circleX, circleY, rect1X, rect1Y, rect2X, rect2Y, controlType], [etc]] also see getPoints(popup) and setPoints() methods pointsAdjusted - get points with any point rotation converted to 0 - see update(true) pointControls - get an array of controls (a container) - use this to animate controls pointCircles - get an array of control circles - use this to place some other object at the point pointObjects - get an array of point objects for each point in the following format: [[control, circle, rect1, rect2, controlType], [etc.]] control - the container for the control that holds the circle and rectangles (also see pointControls) circle - the control point circle (also see pointCircles) rect1 - the first control point rectangle rect2 - the second control point rectangle controlType - the control type: default is "straight" (or null) and there is also "mirror", "free" and "none" NOTE: control, circle, rect1, rect2 can be positioned or animated and controlType can be changed NOTE: the update() method must be called if manually changing the control positions or type NOTE: if constantly animating the controls then use a Ticker.add(function(){squiggle.update();}) NOTE: also see recordData(), setData(), getPoints(), setPoints() methods for further options addPointFactor - (default 20) used when placing new points along edge (editPoints is true) divides the distance between points by this amount - the smaller the more accurate but also slower addMinDistance - (default 15) edge press needs to be within this distance to add a point to the edge segmentPoints - a read-only array of cubic Bezier points for each segment each element is in the form of [point1, controlPoint1, controlPoint2, point2] used internally to animate to the path and add and remove Bezier points segmentRatios - a read-only array of cumulative ratio lengths of segments for instance the default five points (four segments) is [.25, .5, .75, 1] used internally to animate to the path and attribute proportional time to each segment controls - access to the container that holds the sets of controls each control is given a read-only num property sticks - access to the Shape that has the control sticks lastSelected - access to the last selected (or created) control container lastindex - the index number of the last selected controls controlsVisible - get or set the visibility of the controls - or use showControls() and hideControls() toggled - read-only Boolean property as to whether picker is showing types - get or set the general array for the types ["mirror", "straight", "free", "none"] changing this or removing a type will adjust the order when the user double clicks the points to change their type this is not an array of types for each point - see the points property to access the types of each point lockControls - Boolean to lock controls from being adjusted or not lockControlType - Boolean to lock the type of the controls in their current state or not allowToggle - Boolean to get or set clicking to show and hide controls move - Boolean to drag or not drag Squiggle when controls are showing can also set to "always" to allow movement when controls are not showing onTop - get or set the onTop selectPoints - get or set whether points can be selected interactive - get or set whether the shape is interactive - toggle, move, change or add controls, etc. keyFocus - get or set the keyboard focus on the DisplayObject - see also zim.KEYFOCUS will be set to true if this DisplayObject is the first made or DisplayObject is the last to be used with keyboard veeObj - an object with ZIM VEE original parameters:value allowing the ZIM VEE values to be referenced for instance, obj.prop = Pick.choose(obj.veeObj.prop); will reset the the prop to the result of the original ZIM VEE value ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS dispatches a "change" event for when the bezier controls are adjusted (pressup only) if monitoring constant change is needed add a pressmove event to Squiggle.controls the change event object has a transformType property with values of "move", "bezierPoint", "bezierHandle", "bezierSwitch" dispatches "controlsshow" and "controlshide" events when clicked off and on and toggle is true dispatches an "update" event if the points are changed or a point is added or removed this removes all listeners on the old shape and controls so any custom listeners on shape and controls will need to be re-applied - use the update event to do so dispatches a "traversed" event when traverse() is done - the event object has an obj property for the traversing object See the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover MORE https://zimjs.com/squiggle https://www.youtube.com/watch?v=BA1bGBU4itI&list=PLCIzupgRt1pYtMlYPtNTKCtztFBeOtyc0 Note the points property has been split into points and pointObjects (and there have been a few property changes) since the time of the video CLOSE ▲PAGE ▤CODE ▤TOUR😊VIDS

CLOSE ▲

Blob(color, borderColor, borderWidth, points, radius, controlLength, controlType, lockControlType, showControls, lockControls, handleSize, allowToggle, move, dashed, onTop, circleColor, circleBorderColor, stickColor, stickThickness, selectColor, selectPoints, editPoints, interactive, strokeObj, style, group, inherit)

Blob zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION Makes a blob shape inside a container using a number of points. The points have Bezier controls - little handles that change the shape of the Blob. The type of control can be specified overall and individually - and can be hidden or shown The type of control can be changed by double clicking the point - colors of the handles will change Points can be added by clicking on the shape or removed by SHIFT clicking a point. CTRL Z will undo adding or removing a point The shape of the Blob can be recorded with the recordData() method and recreated with the setData() method The Blob is set by default to show and hide controls when clicked It is also draggable by default when the controls are showing SEE https://zimjs.com/paths for a tool to make Blob and Squiggle shapes SEE https://www.youtube.com/watch?v=P2hDe5JCINY for Basics Video MULTIPLE SELECT Multiple points can be selected with the CTRL key held and then dragged or moved with the keyboard arrows (moves 10 pixels with shift key down) NOTE mouseChildren is turned to false for all zim Shape containers. NOTE with the ZIM namespace zns = false, this overwrites a JS Blob - so the JS Blob is stored as document.Blob NOTE if using Rive and Blobs, sometimes Rive apps use embedded images that need the JavaScript Blob() ZIM disables Blob until the Rive app is loaded. Possibly this could conflict with a ZIM Blob being made at the same time as the Rive app. In that case, use zim.Blob() for the blob. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

new Blob().center(); // makes a circle with default 4 points with Bezier controls

EXAMPLE

new Blob({
   points:12, // 12 points for more complex shape
}).center();

EXAMPLE

new Blob({
   color:purple,
   controlType:"free", // free will be default control type (rather than "straight")
   points:[
      // the control position x, y
      // then three point positions inside the control - so relative to the control position
      // 1. circle position x, y (usually the same as the control position - so 0,0)
      // 2. the location of the first control rectangle x and y
      // 3. the location of the second control rectangle x and y
      // then an optional specific type of control that overrides the controlType parameter (or the default type of "straight")
      [-100,-100,-100,100,100,-100,0,0,"mirror"], // this will be type "mirror"
      [100,-100,100,0,-50,0], // this will be type "free" because controlType parameter
      [100,100], // these will be type "none" because no dimensions (or dimensions 0) specified for controls
      [-100,100]
   ]
}).centerReg();

EXAMPLE

// Transform the original points of a Blob
// If you rotate or scale, this affects the control points - the little rectangles rotate or they scale
// To avoid this, the points themselves can be transformed (scaleX, scaleY, scale, rotation, x, y)
// This makes a square and scales it bigger without affecting control size or stroke size (if there were a stroke)
// Note the default number of points is 4 but they are arranged at the top, bottom and sides - so would make a diamond with just controlType:"none"
new Blob({controlType:"none"}).transformPoints("rotation", 45).transformPoints("scale", 2).center();

EXAMPLE

// make a Blob the shape of basic ZIM shapes
// this overrides the path parameter
new Blob({points:"circle"}).pos(200,200);
new Blob({points:new Rectangle(100,200)}).center();
new Blob({points:new Triangle()}).transformPoints("rotation", 90).pos(50,50,true,true);

EXAMPLE

// Animate along a Blob
// see https://zimjs.com/nio/ examples
// see https://zimjs.com/explore/blobAnimate.html for more
// see https://zimjs.com/explore/blobAnimate2.html for more
const path = new Blob().center();
new Circle(10, red).addTo().animate({path:path}, 1);

EXAMPLE

// Animate one Blob into another
const targetBlob = new Blob({points:"rectangle"});
const blob = new Blob({radius:50, points:"circle", interactive:false})
   .pos(200,200)
   .transformPoints("rotation", -45) // to better tween to rectangle
   .animate({
      props:{shape:targetBlob},
      time:1,
      rewind:true,
      loop:true
   });

EXAMPLE

// split Blob into Squiggles
const b1 = new Blob().center();
const s1 = b1.makeSquiggle(0).loc(b1);
const s2 = s1.splitPoints(2).loc(b1);
s2.color = red;
b1.removeFrom();

// // and put back again
// s1.appendPoints(s2.points, "mirror");
// var b2 = s1.makeBlob().loc(s1);
// b2.color = blue;
// b2.borderColor = null;
// s1.removeFrom();
// s2.removeFrom();

EXAMPLE

// Split a blob into two blobs
const blobs = new Blob().center().splitBlob(1,3);
blobs[0].color = blue;

// or with points - cuts diagonally across blob
const blobs = new Blob().center().splitBlob(new Point(0,0), new Point(W,H));
blobs[0].color = blue;

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports VEE - parameters marked with ZIM VEE mean a zim Pick() object or Pick Literal can be passed Pick Literal formats: [1,3,2] - random; {min:10, max:20} - range; series(1,2,3) - order, function(){return result;} - function ** supports OCT - parameter defaults can be set with STYLE control (like CSS) color - |ZIM VEE| (default green) the fill color as any CSS color including "rgba()" for alpha fill (set a to 0 for tranparent fill) borderColor - |ZIM VEE| (default null) the stroke color borderWidth - (default 1 if stroke is set) the size of the stroke in pixels num - get the number of points - to set, use the points property points - (default 4) a number of points to start with to make the shape OR a shape string of "circle", "rectangle" or "triangle" OR a ZIM Circle, Rectangle, Triangle or Flare with any dimensions that will be matched OR an SVG path like: points:"M0,129.5c22,0,40-31,40-41c0-8-3.2-13-10-13" etc. (also see SVGContainer) OR an array of points as follows - see https://zimjs.com/paths for a tool to make points in this format: [[controlX, controlY, circleX, circleY, rect1X, rect1Y, rect2X, rect2Y, controlType], [etc]] controlX and controlY - the x and y location of the control Container which holds the point circle and the two control rectangles circleX and circleY - (default 0) the x and y location of the circle relative to the control location (usually 0, 0) rect1X, rect1Y, rect2X, rect2Y - (default based on controlLength) the x and y location of the control rectangles relative to the control location controlType - (default main controlType parameter or "straight" if not controlType parameter) the point's controlType "none", "mirror", "straight" or "free" custom points will start with approximateBounds() called but approximateBounds() must be called manually anytime afterwards when new bounds are desired. radius - (default 100) the default radius of the circle used to create the blob (also specifies the blob's bounds(-radius, -radius, radius*2, radius*2)) controlLength - |ZIM VEE| (default radius*numPoints/4) specify a Number to override the calculated default controlType - (default "straight") one of four String values as follows: none - there are no control rectangles (they are actually set at 0,0). This makes a corner at the circle point. mirror - the control rectangles reflect one another about the point circle - lengths are kept even straight - the control rectangles keep a straight line through the point circle but length is independent free - the control rectangle moves independently from the other control rectangle ** The controlType can be specified for each point - see the points parameter ** The controlType can be changed by doubleClicking the point circle to cycle through the controls in the order above - unless the lockControlType is set to true lockControlType - (default false) set to true to disable doubleClicking of point circles to change controlType showControls - (default true) set to false to start with controls not showing - can change this after with control property or showControls() method lockControls - (default false) set to true to lock the editing of controls - can't move the points or handles - but can see them if showControls is set to true handleSize - (default 20 mobile 10 for non-mobile) the size of control boxes and affects the circles too proportionally If a handleSize of 0 is chosen, then the sticks will disappear too allowToggle - (default true) set false to let turn off clicks showing and hiding controls move - (default true) set to false to disable dragging when controls are showing can also set to "always" to allow movement when controls are not showing dashed - (default false) set to true for dashed border (if borderWidth or borderColor set) or set to an array of line size then space size, etc. eg. [20, 10] is 20 line and 10 space repeated and [20,100,50,10] is 20 line, 100 space, 50 line, 10 space, etc. onTop - (default true) set to false to not bring shape to top of container when dragging circleColor - (default light) set the circle color of the controls circleBorderColor - (default dark) set the circle border color of the controls stickColor - (default darker) set the stick color of the controls stickThickness - (default 1) set the stick thickness of the controls selectColor - (default white) the color of the selected circle or rectangle of the controls if selectPoints is true selectPoints - (default true) set to false to not allow point controls to be selected for keyboard control editPoints - (default true) lets user add points by pressing on shape path. set to "anywhere" to let users add points anywhere - will add points with controlType:"none" set to false to not allow adding or removing points with click or shift click interactive - (default true) set to false to turn off controls, move, toggle, select, edit - leaving just the shape strokeObj - (default {caps:"butt", joints:"miter", miterLimit:10, ignoreScale:false}) set to adjust stroke properties caps options: "butt", "round", "square" or 0,1,2 joints options: "miter", "round", "bevel" or 0,1,2 miterLimit is the ration at which the mitered joint will be clipped ignoreScale set to true will draw the specified line thickness regardless of object scale style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS approximateBounds(num, showPoints) - update the bounds based on a Rectangle that surrounds the number of points (default 80) distributed around the object path set showPoints to true to draw little dots on points use outline() after object has been added to the stage to see the bounds Blobs with custom points will start with approximateBounds() called but approximateBounds() must be called manually anytime afterwards when new bounds are desired. addPoint(percent, controlType) - add a point at a percent (100) of the total curve this is handy to make path have the same number of points for animate() path tweens controlType can be as specified in main points parameter returns index of new point addPoints(num, controlType, startPoint, spread, dataOnly, points, even) - add num points between existing points controlType can be as specified in main points parameter specify a startPoint to add points between the startPoint and the next point (one segment of points) spread (default false) set to true to spread points evenly around path rather than evenly between segments dataOnly and points are used internally returns object for chaining removePoint(index) - remove the point at the specified index interpolate(num, startPoint, spread, points, even) - get point data {x,y} for existing points and num (default 1) points inbetween used with hitTestPath() and animate() drag on path - also add points (note add points does not use even:true) specify a startPoint to get points between the startPoint and the next point (one segment of points) spread (default false) set to true to spread number of points around path rather equal number between segments points (default all points) the points to work with in the same format as the points property even (default false) set to true to use zim.Bezier() with even turned on for even percentage distribution returns an array of point objects with x, y properties and an r property for ratio of distance along path recordData(toJSON) - returns an object with x, y, points, color, borderColor, borderWidth, move, toggle, controls PROPERTIES to be used with setData() method if toJSON (default false) is set to true, the return value is a JSON string the points data comes from the points property setData(data, fromJSON) - sets the properties to match the data object passed in - this should come from recordData() if fromJSON (default false) is set to true, it will assume a JSON string is passed in as data the points data is parsed with the set setPoints() so the number of points should be the same returns object for chaining getPoints(popup) - returns an array with the same format as the points parameter - or can just use points property - also recordPoints() for backwards compatibility popup - (default false) set to true to open a zim Pane (blob.pane) with the points in a zim TextArea (blob.textArea) (click off to close) NOTE: the TextArea output uses JSON.stringify() - to add the points to the points parameter of the Blob use JSON.parse(output); NOTE: using zog(JSON.stringify(blob.recordData()))... the console will remove the quotes from the controlTypes so those would have to be manually put back in before parse() will work also see points property setPoints(data) - sets the Blob points to the data from getPoints() this does not remake the Blob but rather shifts the controls so the number of points should be the same also see points property changeControl(index, type, rect1X, rect1Y, rect2X, rect2Y, circleX, circleY, update) - change a control type and properties at an index accepts ZIM DUO normal parameters or configuration object literal with parameter names as propterties passing in null as the index will change all points to the specified properties the update parameter defaults to false so set to true to show update or call update() below this is so multiple changes can be batched before calling update - for instance when animating blobs. transformPoints(transformType, amount, x, y, approximateBounds) - scale, rotate, move points without affecting controls or borderWidth - returns object for chaining transformType - String any of: "scale", "scaleX", "scaleY", "rotation", "x", "y" amount - the amount to transform x, y - (default 0, 0) the x and y position to transform about approximateBounds defaults to true - set to false to not call approximateBounds after transforming points reversePoints(sameStart) - reverse the order of the points sameStart defaults to true and will keep the start point the same set to false to make the last point before the start point, the start point This also swaps each rectangle in the Bezier controls also see the Code module for reversePoint(points) function to operate on data points in Squiggle format Note: reversing blob points with the reversePoints function will make the starting point the last point makeSquiggle(index) - create a new Squiggle by cutting blob at index (default 0) returns the new Squiggle - the blob remains unchanged - so may need to remove it splitBlob(a, b, num, clean) - split a Blob into two blobs - returns an array with each blob this uses makeSquiggle() then splitPoints() to split squiggle then makeBlob() to make two blobs a - (default 0) an index of the blob - or an object with an x and y property (read globally) note - if using x, y points, these points do not have to be on the Blob - and they are global b - (default Math.ceil(num points / 2)) an index of the blob - or an object with an x and y property (read globally) num - (default 50) if points are used, this is how many points to add along the line between points to estimate cut point clean - (default true) remove original blob - set to false to not remove update(normalize) - update the Blob if animating control points, etc. would do this in a Ticker set normalize (default false) to true to use pointsAdjusted for rotated and scaled points use true for manually editing points after setting rotation or scale on point just leave out if only animating points showControls() - shows the controls (and returns blob) - or use blob.controlsVisible = true property hideControls() - hides the controls (and returns blob) - or use blob.controlsVisible = false property toggle(state - default null) - shows controls if hidden and hides controls if showing (returns the object for chaining) or pass in true to show controls or false to hide controls traverse(obj, start, end, time) - animates obj from start point to end point along path - thanks KV for the thought! set start point greater than end point to traverse backwards will dispatch a "traversed" event when done setColorRange(color1, color2) - set a color range for shape - used by colorRange property - returns obj for chaining if one color is used, the current color is used and color1 is the second color in the range getPointAngle(index) - gets the angle made by the tangent at the index provided getSegmentPoint(point1, point2) - returns an array of [point1, controlPoint1, controlPoint2, point2] used internally for animating to path and adding removing Bezier points getAdjacentSegmentData(index) - returns an array of two arrays: The first is an array of cubic Bezier points for segments adjacent and including the provided point index each element is in the form of [point1, controlPoint1, controlPoint2, point2] The second is an array of starting point indexes for the segments that were tested used internally to drag an animation along the path will wrap around the blob if needed getCurvePoint(ratio, segmentRatios, segmentPoints, getAngle) gets a point along whole curve at the ratio (0-1) provided along with x and y values, the point has a z value that is the index of the blob point before the calculated point if the getAngle parameter is true (default false) the point also has an angle property which is the angle of the tangent at the point ratio is 0-1 with 0 being at the first point and 1 being at the end of the last segment (the first point) segmentRatios and segmentPoints will be calculated if not provided used internally for animating along the path - if lockControls is true, only animate will precalculate these values linearGradient([colors],[ratios], x0,y0, x1,y1) - shortcut to colorCommand linearGradient method (see properties below) radialGradient([colors],[ratios], x0,y0,radius0, x1,y1,radius1) - shortcut to colorCommand radialGradient method (see properties below) cache(see Container docs for parameter description) - overrides CreateJS cache() and returns object for chaining Leave parameters blank to cache bounds of shape (plus outer edge of border if borderWidth > 0) hasProp(property as String) - returns true if property exists on object else returns false clone(exact, commands) - makes a copy of the object exact (default false) ZIM VEE (Pick) values are active in clones unless exact is set to true For instance, if the object's color is [blue, green] then its clone might be blue or green - which could be different than the original If exact is set to true then the clone will be the color of the original object commands (default false) makes clones with current color commands of object dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String shape - gives access to the shape of the blob color - get and set the fill color colorRange - if setColorRange() is used, the colorRange is a ratio (0-1) between the colors setting the colorRange will change the color property of the shape for instance, shape.setColorRange(blue, pink) then shape.colorRange = .5 will set the color of the shape to half way between blue and pink shape.animate({color:red}, 1); is a shortcut to animate the colorRange shape.wiggle("colorRange", .5, .2, .5, 1, 5) will wiggle the colorRange colorCommand - access to the CreateJS fill command for bitmap, linearGradient and radialGradient fills eg. shape.colorCommand.linearGradient([green, blue ,green], [.2, .5, .8], 0, 0, shape.width, 0) See: https://www.createjs.com/docs/easeljs/classes/Graphics.Fill.html borderColor - get and set the stroke color borderColorCommand - access to the CreateJS stroke command for bitmap, linearGradient and radialGradient strokes See: https://www.createjs.com/docs/easeljs/classes/Graphics.Stroke.html borderWidth - get and set the stroke size in pixels borderWidthCommand - access to the CreateJS stroke style command (width, caps, joints, miter, ignoreScale) See: https://www.createjs.com/docs/easeljs/classes/Graphics.StrokeStyle.html dashed - get and set the dashed - use true / false or an array (see dashed parameter) dashedOffset - get and set the offset of the dash (50 default) - can animate this property for a marquee effect borderDashedCommand - access to the CreateJS stroke dashed command (segments, offset) see https://www.createjs.com/docs/easeljs/classes/Graphics.StrokeDash.html circleColor - get or set the circle color of the controls - requires an update() to see changes circleBorderColor - get or set the circle borderColor of the controls - requires an update() to see changes stickColor - get or set the stick color of the controls - requires an update() to see changes points - get or set the points array of the Blob in the same format as the points parameter: a number, a shape string ("circle", "rectangle", "triangle"), a ZIM Circle, Rectangle, Triangle or an array as follows: [[controlX, controlY, circleX, circleY, rect1X, rect1Y, rect2X, rect2Y, controlType], [etc]] see also getPoints(popup) and setPoints() methods pointsAdjusted - get points with any point rotation converted to 0 - see update(true) pointControls - get an array of controls (a container) - use this to animate controls pointCircles - get an array of control circles - use this to place some other object at the point pointObjects - get an array of point objects for each point in the following format: [[control, circle, rect1, rect2, controlType], [etc.]] control - the container for the control that holds the circle and rectangles (also see pointControls) circle - the control point circle (also see pointCircles) rect1 - the first control point rectangle rect2 - the second control point rectangle controlType - the control type: default is "straight" (or null) and there is also "mirror", "free" and "none" NOTE: control, circle, rect1, rect2 can be positioned or animated and controlType can be changed NOTE: the update() method must be called if manually changing the control positions or type NOTE: if constantly animating the controls then use a Ticker.add(function(){blob.update();}) NOTE: also see recordData(), setData(), getPoints(), setPoints() methods for further options addPointFactor - (default 20) used when placing new points along edge (editPoints is true) divides the distance between points by this amount - the smaller the more accurate but also slower addMinDistance - (default 15) edge press needs to be within this distance to add a point to the edge segmentPoints - a read-only array of cubic Bezier points for each segment each element is in the form of [point1, controlPoint1, controlPoint2, point2] used internally to animate to the path and add and remove Bezier points segmentRatios - a read-only array of cumulative ratio lengths of segments for instance the default four points is [.25, .5, .75, 1] used internally to animate to the path and attribute proportional time to each segment controls - access to the container that holds the sets of controls each control is given a read-only num property sticks - access to the Shape that has the control sticks lastSelected - access to the last selected (or created) control container lastindex - the index number of the last selected controls controlsVisible - get or set the visibility of the controls - or use showControls() and hideControls() types - get or set the general array for the types ["mirror", "straight", "free", "none"] changing this or removing a type will adjust the order when the user double clicks the points to change their type this is not an array of types for each point - see the points property to access the types of each point lockControls - Boolean to lock controls from being adjusted or not allowToggle - Boolean to get or set clicking to show and hide controls move - Boolean to drag or not drag Blob when controls are showing can also set to "always" to allow movement when controls are not showing lockControlType - Boolean to lock the type of the controls in their current state or not onTop - get or set the onTop property selectPoints - get or set whether points can be selected interactive - get or set whether the shape is interactive - toggle, move, change or add controls, etc. keyFocus - get or set the keyboard focus on the DisplayObject - see also zim.KEYFOCUS will be set to true if this DisplayObject is the first made or DisplayObject is the last to be used with keyboard veeObj - an object with ZIM VEE original parameters:value allowing the ZIM VEE values to be referenced for instance, obj.prop = Pick.choose(obj.veeObj.prop); will reset the the prop to the result of the original ZIM VEE value ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS dispatches a "change" event for when the bezier controls are adjusted (pressup only or moving with keys - thanks Yui Kim for find) if monitoring constant change is needed add a pressmove event to Blob.sets the change event object has a transformType property with values of "move", "bezierPoint", "bezierHandle", "bezierSwitch" dispatches "controlsshow" and "controlshide" events when clicked off and on and toggle is true dispatches an "update" event if the points are changed or a point is added or removed this removes all listeners on the old shape and controls so any custom listeners on shape and controls will need to be re-applied - use the update event to do so dispatches a "traversed" event when traverse() is done - the event object has an obj property for the traversing object See the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤TOUR😊VIDS

CLOSE ▲

Flare(color, borderColor, borderWidth, crossAngle, thickness, thicknessA, thicknessB, pin, startX, startY, lengths, angles, anglesA, anglesB, anglesEnd, cross, crossColors, close, dashed, strokeObj, spineColor, spineBorderWidth, spineBorderColor, spineDashed, spineStrokeObj, closeColor, closeBorderWidth, closeBorderColor, closeDashed, closeStrokeObj, style, group, inherit)

Flare zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION Makes a flare shape - a shape with a gradual widening like flared pants or skirts. The shape defaults to a horizontal rectangle flared outwardly to the right. The flare angleA and angleB can be specified at any angle negative or positive. The flare axis or spine can be at any angle to the horizontal positive in the x. The cross or end angles can be specified relative to a normal the spine so 0 is -90. Different color and border options are available and editable as properties. More than one flare can be created in the same shape - these are called segments. Multiple Flare objects can be easily combined into a ZIM MultiFlare and a special FlareBox can be used to place flares or multiFlares around a rectangle to be used for backings on buttons, pictures, etc. See https://zimjs.com/ten/flare.html for examples of a 3D wall, a rocket and a button frame NOTE mouseChildren is turned to false for all zim Shape containers. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

new Flare().center();

// a Rocket
const rocket = new Flare({
   thickness:100,
   angles:-90, // all segment angles will point up
   lengths:[40,.5,100,150,105],
   anglesA:[-20,89,-12,0,-22], // anglesB will be mirrored by default
   color:new GradientColor([dark,silver,dark],[.1,.6,.9],-50,0,50,0),
   cross:true // add a line at segment borders
}).center();

// see also MultiFlare and FlareBox examples

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) color - (default black) the color of the flare if null and a border is speficied the color will be transparent borderColor - (default null) the stroke color borderWidth - (default 1 if stroke is set) the size of the stroke in pixels crossAngle - (default 0) the angle from the normal of the spine so if the spine goes to the right at 0 degrees then 0 crossAngle starts at -90 and goes positive clockwise a crossAangle of -45 would look like a picture frame bevel if the flare starts at the top left corner of a rectangle thickness - (default 20) the thickness at the start of the flare assuming 0 crossAngle this will be divided evenly to thicknessA on one side of the spine and thicknessB on the other side of the spine thicknessA - (default null) - will be set to half the thickness if thicknessB is not set otherwise thickness-thicknessB thicknessB - (default null) - will be set to half the thickness if thicknessA is not set otherwise thickness-thicknessA pin - (default null) - set to a segment number to set registration point at the start of the segment Pin is used with MultiFlare to align flares at pinned segments Pin is used with FlareBox to place pinned segments at any of the four corners of the box When doing so, the Flare will be automatically rotated (corner number - pin number) * 90 This can be overriden by rotating the flare to the desired rotation after creation startX - (default 0) shift the start of the flare in the x from the registration point (note, pin will reset registration) startY - (default 0) shift the start of the flare in the y from the registration point (note, pin will reset registration) lengths - (default [200]) an array of spine lengths angles - (default [0]) an array of angles (degrees) for the spines relative to 0 along the positive x axis anglesA - (default [10]) an array of relative angles to the left of the current spine when heading along the spine so if the spine heads to the right, angleA is positive from the spine upwards think of these as how much the shape flares out from the spine on one side anglesB - (default anglesA) an array of relative angles to the right of the current spine when heading along the spine so if the spine heads to the right, angleB is positive from the spine downwards think of these as how much the shape flares out from the spine on another side anglesEnd - (default [0]) an array of angles at the end of each segment from the normal of each segment spine so if the spine goes to the right at 0 degrees then a 0 anglesEnd is perpendicular to the spine an anglesEnd of 45 would look like a picture frame bevel as the segments are placed around the picture frame clockwise note: end angles greatly change the look of flared segments poorly chosen angles can lead to flares crossing or massively diverging good choices depend on the length of the flares, the spine angles and the flare angles generally, a trial and error technique is the easiest to find the desired solution cross - (default true) draw a crossing line at each segment - this draws each segment as a closed path crossColors - (default null) an array of colors for each segment if cross is true close - (default false) join the end of the last segment to the start of the first segment dashed - (default false) set the dashed of the border if the borderColor or borderWidth is specified strokeObj - (default {caps:"butt", joints:"miter", miterLimit:2, ignoreScale:false}) set to adjust stroke properties caps options: "butt", "round", "square" or 0,1,2 joints options: "miter", "round", "bevel" or 0,1,2 miterLimit is the ration at which the mitered joint will be clipped ignoreScale set to true will draw the specified line thickness regardless of object scale spineColor - (default null) as the spine is drawn, fill the shape it makes with this color this can create a picture frame effect as the spine color may hide half the flare for each segment spineBorderWidth - (default null) the width of the spine spineBorderColor - (default null) the color of the actual spine spineDashed - (default false) set to true for dashed spine (if spineBorderWidth or spineBorderColor set) spineStrokeObj - (default strokeObject) see strokeObject parameter for details closeColor - (default color) the color of the segment created if closing the flare closeBorderWidth - (default borderWidth) the borderWidth of the closing segment if closing the flare closeBorderColor - (default borderColor) the borderColor of the closing segment if closing the flare closeDashed - (default false) set to true for dashed closed segment (if closeBorderWidth or closeBorderColor set) closeStrokeObj - (default strokeObject) see strokeObject parameter for details style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS add(lengths, angles, anglesA, anglesB, anglesEnd, cross, crossColors, close) |ZIM DUO| - add segment(s) to the Flare - returns object for chaining see segment parameters for details - returns object for chaining remake() - remake the Flare segments after setting properties hasProp(property as String) - returns true if property exists on object else returns false clone(exact) - makes a copy of the shape exact (default false) ZIM VEE (Pick) values are active in clones unless exact is set to true For instance, if the object's color is [blue, green] then its clone might be blue or green - which could be different than the original If exact is set to true then the clone will be the color of the original object dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String shape - access to the ZIM Shape for the flare(s) spineShape - access to the ZIM Shape for the spine if spine is true closeShape - access to the ZIM Shape for the closing segment if close is true pin - get or set the pin number - which spine has the registration point see the pin parameter for more details points - access to array of flare shape points {x,y} if not close - around outside then around inside if close - around each segment pinPoints - access to array of spine points {x,y} and then to final end spine point color - get and set the fill color colorRange - if setColorRange() is used, the colorRange is a ratio (0-1) between the colors setting the colorRange will change the color property of the shape for instance, shape.setColorRange(blue, pink) then shape.colorRange = .5 will set the color of the shape to half way between blue and pink shape.animate({color:red}, 1); is a shortcut to animate the colorRange shape.wiggle("colorRange", .5, .2, .5, 1, 5) will wiggle the colorRange borderColor - get and set the stroke color borderWidth - get and set the stroke size in pixels borderDashedCommand - access to the CreateJS stroke dashed command (segments, offset) see https://www.createjs.com/docs/easeljs/classes/Graphics.StrokeDash.html closeColor - get and set the fill color of the close segment closeBorderColor - get and set the stroke color of the close segment closeBorderWidth - get and set the stroke size in pixels of the close segment closeBorderDashedCommand - access to the CreateJS stroke dashed command (segments, offset) see https://www.createjs.com/docs/easeljs/classes/Graphics.StrokeDash.html spineColor - get and set the fill color of the spine shape spineBorderColor - get and set the stroke color of the spine shape spineBorderWidth - get and set the stroke size in pixels of the spine shape spineBorderDashedCommand - access to the CreateJS stroke dashed command (segments, offset) see https://www.createjs.com/docs/easeljs/classes/Graphics.StrokeDash.html ** the following properties can be read or changed ** if changed, the remake() method must be run to see changes ** see the Flare parameters for definitions thicknessA - number thicknessB - number cross - boolean close - boolean lengths - array angles - array anglesA - array anglesB - array anglesEnd - array crossColors - array mouseChildren - set to false to avoid dragging the shape inside to drag or interact with objects inside then set mouseChildren to true ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS See the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

MultiFlare(flares, pins, angles, endToEnd, style, group, inherit)

MultiFlare zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION Joins multiple Flare objects in one container at the pin points of the flares or end to end. See also ZIM Flare and ZIM FlareBox. NOTE mouseChildren is turned to false for all zim Shape containers. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// a fan of legs with feet!
const flare = new Flare({lengths:[100,100,20,8],anglesA:[5,-5,60],anglesB:[5,-5,0]})
const multi = new MultiFlare().center();
loop(12, i=>{
   multi.add(flare.rot(i*360/12))
});

// or prepare flares and angles ahead of time
const flares = [];
const angles = [];
loop(12, i=>{
   flares.push(flare.clone());
   angles.push(i*360/12);
});
new MultiFlare(flares, null, angles).center();

// a ring of beads using endToEnd
const flare = new Flare({crossAngle:-360/12, lengths:[50,20,5,20,50],anglesA:[5,60,0,-60,-5]})
const flares = [];
const angles = [];
loop(12, i=>{
   flares.push(flare.clone());
   angles.push(i*360/12);
});
new MultiFlare(flares, null, angles, true).center();

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) flares - (default null) an array of ZIM Flares objects to add - also see add() method pins - (default null) an array of pin indexes for the flares pins will set the registration point for each flare at whatever segment matches the pin index angles - (default null) an array angles for the flares endToEnd - (default false) set to true to locate each first segment point of the flare at the last segment point of the last flare style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS add(flares) - add an array of flares or a single flare to MultiFlare add() redraws the whole flare so for many, make an array to start and pass it in as an argument remove(flares) - remove an array of flares or a single flare to MultiFlare remove() redraws the whole flare so for many, make an array to start and pass it in as an argument cache(see Container docs for parameter description) - overrides CreateJS cache() and returns object for chaining Leave parameters blank to cache bounds of shape (plus outer edge of border if borderWidth > 0) hasProp(property as String) - returns true if property exists on object else returns false clone() - makes a copy of the multiFlare cloning the flares too dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String ** can get and change the following properties ** see the paremeters for details ** if properties are changed call the remake() method to update the MultiFlare flares - array pins - array angles - array endToEnd - boolean mouseChildren - set to false to avoid dragging the shape inside to drag or interact with objects inside then set mouseChildren to true ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS See the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

FlareBox(width, height, color, borderColor, borderWidth, flares, corners, pins, style, group, inherit)

FlareBox zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION Makes a Rectangle with ZIM Flare objects positioned around edges and corners. Pass in an array of Flare objects or a MultiFlare FlareBox places flares at specified corner indexes depending on flare pin index. See also ZIM Flare and ZIM MultiFlare. A FlareBox can be used as a backing and rollBacking for buttons and other components to create exciting borders inspired by the tail lights of 2020 automibiles. See: https://zimjs.com/ten/flare.html NOTE mouseChildren is turned to false for all zim Shape containers. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const border1 = new Flare({
   thickness:6,
   angles:[0,90], // to the right then down
   lengths:[60,90],
   anglesA:[3,-1.5], // flare angles
   anglesEnd:[45,0], // 0 is optional
   color:white,
   pin:1 // pin at flare corner
});

const border2 = new Flare({
   thickness:25,
   angles:[0,90], // to right then down
   lengths:[50,50],
   anglesA:[-2,2], // anglesB will mirror these if not provided
   anglesEnd:[45],
   color:dark,
   pin:1 // pin at flare corner
});

// put both flares at left top corner 0
// they each have pin of 1 so
// the rotation is (0-1)*90 = -90 (counter clockwise)
// they were to the right and down
// now they are up and to the right
const flareBox = new FlareBox(220, 100, blue, dark, 3, [border1, border2], [0,0])
   .centerReg();

// clone the flares for the rollover FlareBox
// put the first flare at corner 2
// the rotation becomes (2-1)*90 = 90 (clockwise)
// it was built to go to the right and down
// now it is going down and to the left
const flareBoxOver = new FlareBox(220, 100, green, dark, 3, [border1.clone(), border2.clone()], [2,0])
   .centerReg({add:false});

// use the flareBoxes as backings
const button = new Button({
   width:flareBox.width,
   height:flareBox.height,
   backing:flareBox,
   rollBacking:flareBoxOver
}).center();

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) width - (default 220) the width of the rectangle about which the Flare objects are placed this is a little larger than the ZIM Button default width height - (default 80) the height of the rectangle about which the Flare objects are placed this is a little larger than the ZIM Button default height color - (default black) the fill color as any CSS color including "rgba()" for alpha fill (set a to 0 for tranparent fill) borderColor - (default null) the stroke color borderWidth - (default 1 if stroke is set) the size of the stroke in pixels flares - (default null) an array of ZIM Flare objects or a single flare or a ZIM MultiFlare corners - (default [0]) an array of corner indexes to place the pin points of the ZIM Flare objects corner indexes are: 0 - LEFT TOP 1 - RIGHT TOP 2 - RIGHT BOTTOM 3 - LEFT BOTTOM pins - (default null) an array of pins of the ZIM Flare objects The pin index can be set on the Flare or through the MultiFlare or here in the FlareBox The pin is also the registration point of the flare so the flare will be placed at the corner at its pin FlareBox will also automatically rotate the flares with this formula: flare.rotation = (corner-pin)*90 This formula allows for easy setting of angles on corners See the Button at https://zimjs.com/ten/flare.html This can be overridden by setting the flare rotation after the FlareBox is created style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS setColorRange(color1, color2) - set a color range for shape - used by colorRange property - returns obj for chaining if one color is used, the current color is used and color1 is the second color in the range cache(see Container docs for parameter description) - overrides CreateJS cache() and returns object for chaining Leave parameters blank to cache bounds of shape (plus outer edge of border if borderWidth > 0) hasProp(property as String) - returns true if property exists on object else returns false clone() - makes a copy of the flareBox and clone flares as well dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String multiFlare - gives access to the ZIM Multiflare object this is made automatically by FlareBox if an array of flares was used flares - an array of flares that belong to the multiFlare backing - gives access to the rectangle backing shape color - get and set the fill color of the backing shape colorRange - if setColorRange() is used, the colorRange is a ratio (0-1) between the colors setting the colorRange will change the color property of the backing shape for instance, shape.setColorRange(blue, pink) then shape.colorRange = .5 will set the color of the shape to half way between blue and pink shape.animate({color:red}, 1); is a shortcut to animate the colorRange shape.wiggle("colorRange", .5, .2, .5, 1, 5) will wiggle the colorRange borderColor - get and set the stroke color borderWidth - get and set the stroke size in pixels borderDashedCommand - access to the CreateJS stroke dashed command (segments, offset) see https://www.createjs.com/docs/easeljs/classes/Graphics.StrokeDash.html mouseChildren - set to false to avoid dragging the shape inside to drag or interact with objects inside then set mouseChildren to true ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS See the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Label(text, size, font, color, rollColor, shadowColor, shadowBlur, align, valign, bold, italic, variant, lineWidth, lineHeight, backing, outlineColor, outlineWidth, backgroundColor, backgroundBorderColor, backgroundBorderWidth, corner, backgroundDashed, padding, paddingH, paddingV, shiftH, shiftV, rollPersist, labelWidth, labelHeight, maxSize, splitWords, style, group, inherit)

Label zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION Makes a label - wraps the createjs Text object. Can use with Button, CheckBox, RadioButtons and Pane. Text seems to come in different sizes so we do our best. Have tended to find that left and alphabetic are most consistent across browsers. Custom fonts loaded through css can be used as well. NOTE can wrap text at given width using lineWidth (or labelWidth) parameter. To dynamically change the width without changing the font size use the labelWidth property. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

new Label("Hello").center(); // adds label to and centers on the stage

new Label({
   text:"CLICK",
   size:100,
   font:"courier",
   color:white,
   rollColor:red,
   bold:true,
   italic:true
}).loc(100,100).tap(()=>{zog("tapping");});

EXAMPLE

// with text that wraps at labelWidth
// can also set this as a property later to dynamically change width of text
// without changing the size
new Label({
   text:"this is a long bunch of text, this is a long bunch of text, this is a long bunch of text",
   labelWidth:200
}).center();

EXAMPLE

STYLE = {font:"courier"};
new Label("Hi Courier").center(); // will be courier not arial

STYLE = {text:"YAY!", color:red};
new Label().center().mov(0,100); // will say YAY! in red arial font
new Label("Hello").center().mov(0,200); // will say Hello in red arial

VIDS

CLOSE ▲

LabelOnPath(label, path, percentAngle, percents, showPath, allowToggle, interactive, onTop, rtl, style, group, inherit)

LabelOnPath zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION Makes a label along a path of a Squiggle or Blob - which can be interactive, fixed, toggled or hidden A list of percentages for where the letters are can be provided to move around letters See: https://zimjs.com/explore/labelonpath.html NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const lop = new LabelOnPath({
   label:"Hello World",
   // label:new Label({text:"JELLO JIGGLES!", size:50}),
   // path:new Blob(),
   // path:new Squiggle({
   //     color:lighter,
   //     thickness:4,
   //     points:[[0,75,0,0,-100,200,100,-200],[300,75,0,0,-100,200,100,-200]]
   // }).transformPoints("scaleX",2).transformPoints("rotation",0),
   percentAngle:100, // default
   showPath:false, // default
   allowToggle:true, // default
   interactive:true, // default
   onTop:false // default
}).center();
zog(lop.text)

F.on("keydown", ()=>{
   // shows percent spacing of letters along path
   // could pass [results] in as an array to percents parameter of LabelOnPath
   zog(lop.percents.toString());
   // uncomment to record the path
   // could pass this in as the points parameter to start with a given path
// lop.path.getPoints(true);
});

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) label - (default "Label on Path") a String or a ZIM Label can set any label properties such as color, size, font, etc. on the label passed in path - (default new Squiggle()) a ZIM Squiggle or ZIM Blob can set any properties such as color, points, etc. on the shape passed in percentAngle - (default 100) from 0-100 (or beyond in either direction) as to how much to tilt the letters percents - (default null) an array of percentage locations of the letters along the line - should match number of letters showPath - (default true) Boolean to show path at start allowToggle - (default true) Boolean to allow user to toggle path off and on interactive - (default true) Boolean to allow user to change path with controls, drag or add and remove points can also set these individually on the path onTop - (default false) - Boolean to set path on top when dragged rtl - (default DIR) - set to true to start letters at right end of path - will just reverse the Blob or Squiggle path. style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS toggle(state) - leave off state to toggle path to opposite state. Use true to hide and false to show - returns object for chaining hidePath() - hides path - returns object for chaining showPath() - shows path - returns object for chaining setProps(properties) - sets provided properties (as {prop:val, prop:val}) for each letter the values accept ZIM VEE - dynamic parameters - see ZIM Pick() returns object for chaining resize() - if not interactive, call this to update the text on the path - returns object for chaining cache(see Container docs for parameter description) - overrides CreateJS cache() and returns object for chaining Leave parameters blank to cache bounds of shape (plus outer edge of border if borderWidth > 0) hasProp(property as String) - returns true if property exists on object else returns false clone() - makes a copy with properties such as x, y, etc. also copied dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - the name of the class as a String text - get or set the text on the path path - read-only access to path - but can manipulate the path letters - access to ZIM Container of labels used for letters for instance labels.loop(label=>{label.color = red;}); or animate as a sequence labels.animate({props:{scale:1.5}, loop:true, rewind:true, sequence:.2}); numLetters - how many letters - same as letters.numChildren percents - access to the array of percents for letter positioning - resize() after changing unless interactive which auto resizes color - get or set the color of the text allowToggle - get or set the Boolean to allow toggling the path interactive - get or set the Boolean to allow interaction with the path ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS See the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

LabelOnArc(label, size, font, color, radius, flip, spacing, letterSpacing, angles, showCircle, arcColor, arcBorderColor, arcBorderWidth, radiusSpread, rtl, style, group, inherit)

LabelOnArc zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION Makes a label along an arc - see also LabelOnPath - for a more interactive version Used internally for making labels on Radial and RadialMenu objects NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const loa = new LabelOnArc({
   label:"Hello World"
}).center();
zog(loa.text);

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) label - (default "Label on Arc") a String or a ZIM Label can set any label properties such as color, size, font, etc. on the label passed in size - (default 30) the font size of the label font - (default "verdana") the font of the label - can load custom fonts in Frame() or F.loadAssets() color - (default white) a color for the text can be any ZIM or CSS color radius - (default 100) the radius of the circle to apply the arc of the text flip - (default false) set to true to flip text if between 90 and 270 spacing - (default 0) the space between the Label and the arc - varies with different fonts letterSpacing - (default 5) - the space between letters angles - (default null) optionally specify an array of angles for the letters this will override letterSpacing - see also angles property to receive an array of angles showCircle - (default false) set to true to see a circle - then use circle property to adjust if desired arcColor - (default null) set to a color to see a filled arc arcBorderColor - (default null) the borderColor of the arc acrBorderWidth - (default 2 if arcBorderColor) the borderWidth of the arc radiusSpread - (default false) set to true to keep same letter angles as radius is changed ignored if angles are provided rtl - (default ZIM DIR) - set to true for right to left text style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS hasProp(property as String) - returns true if property exists on object else returns false setProps(properties) - sets provided properties (as {prop:val, prop:val}) for each label the values accept ZIM VEE - dynamic parameters - see ZIM Pick() returns object for chaining clone() - makes a copy with properties such as x, y, etc. also copied dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - the name of the class as a String text - get or set the text on the arc radius - get or set the radius of the arc (see radiusSpread parameter too) labels - an array of ZIM Label objects for the letters letters - access to ZIM Container of labels used for letters for instance labels.loop(function (label) {label.color = red;}); or animate as a sequence labels.animate({props:{scale:1.5}, loop:true, rewind:true, sequence:200}); numLetters - how many letters - same as letters.numChildren letterHeight - get the height of letters color - get or set the text color circle - access to the circle object arc - access to the arc object angles - access to the array angles for letter positioning use angles.toString() to log angle data (for kerning) this can be modified and passed in as an angles property to start innerRadius - the inside radius at the bottom of the text outerRadius - the outside radius at the top of the text ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS See the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

LabelLetters(label, align, valign, letterSpacing, letterSpacings, lineSpacing, lineSpacings, lineHeight, lineAlign, lineValign, cache, rtl, style, group, inherit)

LabelLetters zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION Splits apart a ZIM Label into labels per characater to allow manipulation of each character - animation, kerning, etc. SEE: https://zimjs.com/ten/radial.html - (ZIM TEN) the title and subtitle Also accepts basic HTML-like tags to allow Canvas text to have multi-formatting. SEE: https://zimjs.com/cat/html.html NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const letters = new LabelLetters("Label Letters", CENTER, "bottom", 5)
   .center()
   .animate({
      props:{scale:1.5, rotation:-10},
      wait:.5,
      time:.2,
      sequence:.05,
      rewind:true
   });

EXAMPLE

new LabelLetters("and Radial(), LabelOnArc(), LabelLetters()")
   .center()
   .animate({
      from:true,
      props:{alpha:0},
      time:.01,
      sequence:.04
   });

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) label - (default "Label Letters") a String or a ZIM Label can set any label properties such as color, size, font, etc. on the label passed in can pass in a string with basic "old fashioned" HTML tags as follows: <b>bold</b> - or <strong>bold</strong> <i>italic</i> - or <em>italic</em> <u>underline</u> - can use this with <a> to make a classic underlined link <a href=url target=_blank>link</a> <font color=zimColor backgroundColor='htmlColor' rollBackgroundColor=#hexColor size=20 family=verdana group=groupStyle>font</font> note: use NO QUOTES except for single quote with colors if want HTML blue for instance rather than ZIM blue note: setting groupStyle will make letter from scratch as opposed to building on the submitted label styles align - (default CENTER) set to LEFT, CENTER / MIDDLE, RIGHT for letter registration x positioning also see lineAlign for alignment of lines valign - (default CENTER) set to TOP, CENTER / MIDDLE, "bottom" for letter registration y positioning also see lineValign for vertical alignment of lines letterSpacing - (default 5) - the space between letters letterSpacing is turned off if the Label has a backgroundColor to use letterSpacing and a backgroundColor use the backing parameter of Label instead of backgroundColor or use letterSpacings (see below) to set specific spacings (kerning) on letters letterSpacings - (default null) - an array of the space between letters each letter any value here will override the letterSpacing 0 is the index for the space between first and second letter the length of this should be one less than the number of letters lineSpacing - (default 5) - the space between lines (not including lineHeight) lineSpacings - (default null) - an array of the space between lines any values here will override the lineSpacing lineHeight - (default null) null will auto set the height. Set to a number to force line heights - if \n or <br> are present in label lineAlign - (default LEFT or RIGHT for rtl:true) the horizontal alignment of lines if multiple lines - set to LEFT, CENTER/MIDDLE, RIGHT set to START to lineAlign LEFT for ZIM DIR constant is "ltr" or RIGHT when DIR="rtl" - END is the opposite lineValign - (default BOTTOM) the vertical alignment within lineSpacing if multiple lines - set to TOP, CENTER/MIDDLE, BOTTOM cache - (default false) set to true to cache each letter - improves performance on animation rtl - (default false) set to true to reverse letters other than a-zA-Z0-9 and set default lineAlign to RIGHT style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS hasProp(property as String) - returns true if property exists on object else returns false setProps(properties) - sets provided properties (as {prop:val, prop:val}) for each label the values accept ZIM VEE - dynamic parameters - see ZIM Pick() returns object for chaining clone() - makes a copy with properties such as x, y, etc. also copied dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - the name of the class as a String text - get the text of the original Label See: https://zimjs.com/zapp/Z_VSR9X for updating text labels - an array of ZIM Label objects for the letters numLetters - how many letters (same as numChildren) ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS See the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

LabelWords(label, width, size, font, color, backgroundColor, itemCache, itemRegX, itemRegY, spacingH, spacingV, wrapperType, align, valign, alignInner, valignInner, flip, reverse, bottomFull, colSize, rowSize, height, minSpreadNum, minStretchNum, percentVoidH, offsetVoidH, percentVoidV, offsetVoidV, minStretchFirst, style, group, inherit)

LabelWords zim class - extends a zim Wrapper which extends a zim.Container which extends a createjs.Container DESCRIPTION Splits apart a ZIM Label into labels per word - also see LabelLetters to allow manipulation of each word - animation, color, etc. SEE: https://zimjs.com/016/labelwords.html NOTE since this is really a Wrapper containing word Labels, all the wrapper functionality can be used. SEE: https://zimjs.com/ten/wrapper.html NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

new LabelWords({
   label:"Here is LabelWords that divides text into words for individual control!",
   color:white,
   itemRegY:BOTTOM,
   itemCache:true,
   backgroundColor:series(red,orange,pink,green,blue,purple),
   size:50,
   width:700,
   align:CENTER
}).center().mov(0,20).animate({
   props:{scaleY:0},
   time:.5,
   rewind:true,
   loop:true,
   sequence:.1
});

CLOSE ▲

Emoji(code, size, monochrome, italic, backgroundColor, backgroundBorderColor, backgroundBorderWidth, corner, backing, padding, paddingH, paddingV, shiftH, shiftV, style, group, inherit)

Emoji zim class - extends a zim.Label which extends a zim.Container DESCRIPTION Shows an emoji in a Label - an emoji is just text. This helps treat the emoji as an image and works in conjunction with ZIM EmojiPicker SEE: ZIM EmojiPicker() in COMPONENTS below ColorPicker(). SEE: https://zimjs.com/nft/bubbling/emoji.html NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// Go to https://emojipedia.org/ and find an emoji page
// copy the emoji or use the copy link and paste into the string below
new Emoji("paste the unicode icon here in string")
   .center()
   .drag();

EXAMPLE

// or use UTF code from https://zimjs.com/emoji
new Emoji("\ud83c\udf47") // grapes using UTF codes
   .center()
   .drag();

CLOSE ▲

Button(width, height, label, backgroundColor, rollBackgroundColor, downBackgroundColor, color, rollColor, downColor, borderColor, borderWidth, rollBorderColor, downBorderColor, backing, rollBacking, downBacking, icon, rollIcon, downIcon, corner, dashed, shadowColor, shadowBlur, gradient, gloss, align, valign, indent, indentH, indentV, hitPadding, autoPadding, autoPaddingH, autoPaddingV, rollPersist, toggle, toggleBackgroundColor, rollToggleBackgroundColor, downToggleBackgroundColor, toggleColor, rollToggleColor, downToggleColor, toggleBacking, rollToggleBacking, downToggleBacking, toggleIcon, rollToggleIcon, downToggleIcon, toggleEvent, wait, waitTime, waitBackgroundColor, rollWaitBackgroundColor, downWaitBackgroundColor, waitColor, rollWaitColor, downWaitColor, waitBacking, rollWaitBacking, downWaitBacking, waitIcon, rollWaitIcon, downWaitIcon, waitModal, waitEnabled, style, group, inherit)

Button zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION Makes a button with rollover and many more features - see parameters. You will need to pass in a Label to change the font properties of the button from the default. You will then need to add the button to the stage and add a mousedown or click event. Button rollover is done automatically. Generally, there are three modes for a button - normal, toggle and wait. Each of these have backgroundColor, color, backing and icon displays and each of these have up (normal), roll and down states. Down states were added in ZIM ZIM 01 SEE https://zimjs.com/zim/button.html DISPLAYS FOR NORMAL MODE WITH THREE STATES EACH backgroundColor, rollBackgroundColor, downBackgroundColor, color, rollColor, downColor, backing, rollBacking, downBacking, icon, rollIcon, downIcon ** The normal mode also has borderColor, borderWidth, rollBorderColor and downBorderColor inserted after the color set. The parameters are kept flat rather than grouped in {} object parameters in order to use ZIM DUO and STYLE The button parameters have indicators showing the subsections The normal mode is listed first, then general Button parameters such as corner, shadowColor, etc. The toggle and wait parameters are listed last. You can set a backing display object (Shape, Bitmap, Pattern, etc.) in place of the standard rectangle. You can set an icon display object in place of the standard text You can set the Button to toggle between text, backings or icons SEE the ZIM Pizzazz series for a growing selection of backings, patterns and icons https://zimjs.com/bits/view/pizzazz.html https://zimjs.com/bits/view/icons.html https://zimjs.com/patterns.html NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

new Button(200,60,"CLICK").center().tap(()=>{
   zog("clicking");
});

// OR add custom label (needed to change label color for instance)
const label = new Label({
   text:"POWER OPTION",
   size:40,
   backgroundColor:"violet",
   bold:true
});
new Button({
   label:label,
   width:390,
   height:110,
   backgroundColor:"purple",
   rollBackgroundColor:"MediumOrchid",
   borderWidth:8,
   borderColor:"violet",
   gradient:.3,
   corner:0
}).center();

EXAMPLE

// using the on() method and a mousedown - or click - event rather than tap()
// note - do not chain the on() method
const button = new Button().center();
button.on("mousedown", ()=>{
   zgo("https://zimjs.com");
})

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) ** supports VEE - parameters marked with ZIM VEE mean a zim Pick() object or Pick Literal can be passed Pick Literal formats: [1,3,2] - random; {min:10, max:20} - range; series(1,2,3) - order, function(){return result;} - function width - (default 200) the width of the button or AUTO to fit width to label (see also autoPadding) height - (default 60) the height of the button or AUTO to fit height to label (see also autoPadding) label - (default "CLICK" or "" if icon or backing) ZIM Label or plain text with default settings (white) ---------- NORMAL MODE backgroundColor - |ZIM VEE| (default purple) background color of button (any CSS color) also as of ZIM ZIM 01 any backgroundColor parameter can be written as bgColor rollBackgroundColor - |ZIM VEE| (default backgroundColor.lighten(.2)) rollover background color of button also as of ZIM ZIM 01 any backgroundColor parameter can be written as bgColor - so rollBgColor works, etc. downBackgroundColor - |ZIM VEE| (default null) pressing down background color of button color - |ZIM VEE| (default white) label color of button (any CSS color) unless a custom Label is set rollColor - |ZIM VEE| (default white) rollover label color of button downColor - |ZIM VEE| (default null) pressing down label color of button borderColor - (default null) the color of the border rollBorderColor - (default borderColor) rollover color of the border downBorderColor - (default rollBorderColor) the pressing down color of the border borderWidth - (default null) thickness of the border backing - (default null) a Display object for the backing of the button (eg. Shape, Bitmap, Container, Sprite) assumed to be center registration for easy positioning *** as with all backings see ZIM Pizzazz module for a fun set of Button Shapes like Boomerangs, Ovals, Lightning Bolts, etc. https://zimjs.com/bits/view/pizzazz.html rollBacking - (default null) a Display object for the backing of the rolled-on button downBacking - (default null) a Display object for the backing of the pressed-down button icon - (default null) set to display object to add icon at the center of the button and remove label assumed to be center registration for easy positioning *** as with all icons https://zimjs.com/bits/view/icons.html rollIcon - (default null) set to display object to show icon on rollover downIcon - (default null) set to display object to show icon on press down ---------- GENERAL PARAMETERS corner - (default 10) the round of the corner (set to 0 for no corner) can also be an array of [topLeft, topRight, bottomRight, bottomLeft] and [horizontal, vertical] pairs - see Rectangle() for more info dashed - (default false) set to true to turn the border to dashed - if the borderColor or borderWidth is provided shadowColor - (default rgba(0,0,0,.3)) set to -1 for no shadow shadowBlur - (default 14) how blurred the shadow is if the shadow is set gradient - (default 0) 0 to 1 (try .3) adds a gradient to the button gloss - (default 0) 0 to 1 (try .1) adds a gloss to the button align - (default CENTER) horizontal align of the label valign - (default CENTER) vertical align of the label indent - (default 10) indent of label when align or valign is set indentH - (default indent) horizontal indent of label when align or valign is set indentV - (default indent) vertical indent of label when align or valign is set hitPadding - (default 0) adds extra hit area to the button (good for mobile) Note that if the button alpha is 0 the button will still be active if hitPadding is not equal to 0 Set the hitPadding property to 0 in this case - thanks Frank Los for the notice autoPadding - (default 20) the padding used by AUTO width or height autoPaddingH - (default autoPadding) the padding used by AUTO width autoPaddingV - (default autoPadding) the padding used by AUTO height rollPersist - (default false) set to true to keep rollover state when button is pressed even if rolling off ---------- TOGGLE MODE toggle - (default null) set to string to toggle with label - or set to true to activate toggle but keep label the same the button will not toggle if there is a wait parameter set see also toggle colors, backings and icons toggleBackgroundColor - (default backgroundColor) background color to make button when toggled rollToggleBackgroundColor - (default toggleBackgroundColor) background color for button when toggled and rolled over downToggleBackgroundColor - (default null) background color for button when toggled and pressed down toggleColor - (default label's color) color to make text when toggled rollToggleColor - (default label's roll color) color for text when toggled and rolled over downToggleColor - (default null) color for text when toggled and pressed down toggleBacking - (default null) set to display object to set a different backing for toggled state rollToggleBacking - (default null) set to display object to set a backing for the rolled toggle state downToggleBacking - (default null) set to display object to set a backing for the pressed down state toggleIcon - (default null) set to display object to add icon at the center of the button and remove label in toggle state rollToggleIcon - (default null) set to display object to show icon on rollover in toggle state downToggleIcon - (default null) set to display object to show icon on press down in toggle state toggleEvent - (default mousedown for mobile and click for not mobile) what event causes the toggle ---------- WAIT MODE wait - (default null) - String word for button to show when button is pressed and a wait state is desired LOADING: this can be used as a loading message - so change the button to "LOADING" When the asset has loaded, use the clearWait() method to return to the normal button or toggled button state CONFIRMING: this can also be used to confirm user action rather than a full new confirm panel Set wait:"CONFIRM", set the waitBackgroundColor and rollWaitBackground parameters to red and the waitTime parameter to 4 In a button mousedown (must use mousedown - not click or tap if ACTIONEVENT is mousedown - the default), check if the waiting property is true to test for confirmation The waiting property will not be true for the first button press but will be true during the wait period Perhaps set the waitModal parameter to true to clearWait() if the user clicks off the button Use the clearWait() method to clear or cancel the wait status - for instance, if the pane the button is in is closed waitTime - (default 5 seconds) seconds to show wait state before reverting to normal button (also see ZIM TIME constant) waitBackgroundColor - (default red) background color to make button during wait time if wait is set rollWaitBackgroundColor - (default rollBackgroundColor) background color for button when waiting and rolled over downWaitBackgroundColor - (default null) background color for button when waiting and pressed down waitColor - (default label's color) color to make text during wait time if wait is set rollWaitColor - (default label's roll color) color for text when waiting and rolled over downWaitColor - (default label's roll color) color for text when waiting and pressed down waitBacking - (default null) set to display object to set a different backing for wait state rollWaitBacking - (default null) set to display object to a different roll backing for wait state downWaitBacking - (default null) set to display object to a different pressed-down backing for wait state waitIcon - (default null) set to display object to add icon at the center of the button and remove label in wait state rollWaitIcon - (default null) set to display object to show icon on rollover in wait state downWaitIcon - (default null) set to display object to show icon on pressed down in wait state waitModal - (default false) set to true to clearWait() if the user clicks off the button waitEnabled - (default true) set to false to disable button while wait is in progress ---------- FINAL PARAMETERS style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS setBacking(type, newBacking) - dynamically set any type of backing for button (if null removes backing for that type) Backing types are: "backing", "rollBacking", "downBacking", "toggleBacking", "rollToggleBacking", "downToggleBacking", "waitBacking", "rollWaitBacking", "downWaitBacking" note - all backing will have a pattern property if a pattern is set as a backing returns object for chaining setIcon(type, newIcon) - dynamically set any type of icon for button (if null removes icon for that type) Icon types are: "icon", "rollIcon", "downIcon", "toggleIcon", "rollToggleIcon", "downToggleIcon", "waitIcon", "rollWaitIcon", "downWaitIcon" returns object for chaining toggle(state) - forces a toggle of label, backing and icon if set state defaults to null so just toggles if left blank pass in true to go to the toggled state and false to go to the original state returns object for chaining removeRoll() - force rollover state off wait() - forces a wait state - with wait text, backings and icons if set clearWait() - clears a wait state of the button - sets it back to normal removeWait() - removes (and clears) a wait state of the button so it will not trigger again hasProp(property as String) - returns true if property exists on object else returns false clone(exact) - makes a copy with properties such as x, y, etc. also copied exact - will ignore ZIM VEE values and clone the original values dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String text - references the text property of the Label object of the button label - gives access to the label color - get or set non-rolled on label color (if no icon specified) rollColor - get or set rolled on label color backgroundColor - get or set non-rolled on backing color (if no backing specified) rollBackgroundColor - get or set rolled on backing color rollPersist - default is false - set to true to keep rollover state when button is pressed even if rolling off borderColor - get or set non-rolled on border color rollBorderColor - get or set the border rolled color hitPadding - extra padding for interactivity - see hitPadding parameter for extra notes backing - references the backing of the button use setBacking() to change as with all backings note - all backings will have a pattern property if a pattern is set as a backing rollBacking - references the rollBacking (if set) downBacking - references the downBacking (if set) icon - references the icon of the button (if set) use setIcon() to change as with all icons rollIcon - references the rollIcon (if set) downIcon - references the downIcon (if set) rolled - read-only true if button is being rolled over else false pressed - read-only true if button is being pressed else false toggled - read-only true if button is in toggled state, false if button is in original state note: on mousedown toggle may not be switched over - except on mobile so would recommend for consistency checking on click or tap or mouseup toggleBacking - references the toggle backing (if set) rollToggleBacking - references the toggle roll backing (if set) downToggleBacking - references the toggle down backing (if set) toggleIcon - references the toggle icon (if set) rollToggleIcon - references the toggle roll icon (if set) downToggleIcon - references the toggle down icon (if set) waiting - read-only true if button is in the waiting state within wait time note: must test this in a mousedown function not click or tap waitBacking - references the wait backing (if set) rollWaitBacking - references the wait roll backing (if set) downWaitBacking - references the wait down backing (if set) waitIcon - references the wait icon (if set) rollWaitIcon - references the wait roll icon (if set) downWaitIcon - references the wait down icon (if set) focus - get or set the focus property of the Button used for tabOrder enabled - default is true - set to false to disable veeObj - an object with ZIM VEE original parameters:value allowing the ZIM VEE values to be referenced for instance, obj.prop = Pick.choose(obj.veeObj.prop); will reset the the prop to the result of the original ZIM VEE value ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. OPTIMIZED This component is affected by the general OPTIMIZE setting (default is false) if set to true, you will have to S.update() after setting certain properties for example seeing toggle take effect EVENTS dispatches a "waited" event if button is in wait state and the wait time has completed See the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

CheckBox(size, label, startChecked, color, backgroundColor, borderColor, borderWidth, corner, margin, indicatorType, indicatorColor, tap, rtl, style, group, inherit)

CheckBox zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION A checkbox that when pressed toggles the check and a checked property. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const checkBox = new CheckBox(50, "TEST").center().change(()=>{
   zog(checkBox.checked); // will be true then false, etc.
});

VIDS

CLOSE ▲

RadioButtons(size, buttons, vertical, color, backgroundColor, spacing, margin, always, indicatorColor, index, rtl, selectedIndex, style, group, inherit)

RadioButtons zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION A radio button set that lets you pick from choices. Radio buttons can display radio buttons vertically (default) or horizontally. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const radioButtons = new RadioButtons(50, ["ONE", "TWO", "THREE"]).center().change(()=>{
   zog(radioButtons.text); // will be ONE, TWO or THREE
   zog(radioButtons.index); // will be 0, 1, or 2
});

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) size - (default 60) in pixels buttons - an array of button data objects as follows: [{label:ZIM Label or text, id:optional id, selected:optional Boolean}, {etc...}] or just a list of labels for default labels ["hi", "bye", "what!"] vertical - (default true) displays radio buttons vertically - set to false to display horizontally color - (default darker) the text color of the label backgroundColor - (default "rgba(255,255,255,.8)") the background color of the circle borderColor - (default darker) the color of the border borderWidth - (default size/9) thickness of the border spacing - (size*.2 for vertical and size for horizontal) the space between radio button objects margin - (size/5) the space around the radio button itself always - (default true) if set false, cannot click on selection to unselect it indicatorColor - (default borderColor or black) the color of the indicator index - (default 0) - set the index at start rtl - (default DIR=="rtl") - set to true to put text on left of RadioButtons selectedIndex - same as index, kept in for backwards compatibility in ZIM DUO style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS setSelected(num) - sets the selected index (or use index) -1 is default (none) hasProp(property as String) - returns true if property exists on object else returns false clone() - makes a copy with properties such as x, y, etc. also copied dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String selected - gets the selected object - selected.label, selected.id, etc. index - gets or sets the selected index of the buttons label - current selected label object text - current selected label text id - current selected id buttons - an array of button Container objects holding the shape and label (note - different than buttons parameter) labels - an array of the ZIM Label objects. labels[0].text = "YUM"; labels[2].y -= 10; indicators - an array of the zim Shape dot objects. indicators[0].color = "yellow"; enabled - default is true - set to false to disable ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. OPTIMIZED This component is affected by the general OPTIMIZE setting (default is false) if set to true, you will have to S.update() after setting certain properties and S.update() in change event to see component change its graphics ACTIONEVENT This component is affected by the general ACTIONEVENT setting The default is "mousedown" - if set to something else the component will act on click (press) EVENTS dispatches a "change" event when pressed but not when index is set then ask for the properties above for info ALSO see the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

Toggle(width, height, label, startToggled, backgroundColor, margin, indicatorType, indicatorColor, tap, toggleBackgroundColor, color, borderColor, borderWidth, corner, indicatorCorner, shadowColor, shadowBlur, time, labelLeft, style, group, inherit)

Toggle zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION A Toggle button that toggles off and on - with optional labels Thanks Andi Erni for the initial design and coding of the Toggle. See: https://zimjs.com/explore/toggle.html NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const toggle = new Toggle({label:"ON"}).center().change(()=>{
   zog(toggle.toggled);
});

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) width - (default 80) the width of the toggle (less labels) height - (default 50) the height of the toggle label - (default null) an optional ZIM Label (or text for default label properties) also see labelLeft for left side text startToggled - (default false) set to true to start in the toggled position backgroundColor - (default purple) set to any HTML color for background color margin - (default 10) the distance around and between the toggle and its parts indicatorType - (default "circle" or "round") set to "rectangle" or "square" for square indicator indicatorColor - (default darker) toggleBackgroundColor - (default "#F93") orange - for toggled background color try setting the borderColor to the same color as the background for inner color change effect color - (default darker) the font color of the toggle borderColor - (default null) the color of the border borderWidth - (default null - or 1 if borderColor) the size of the border corner - (default half the height) a corner radius - or an array of corners [topLeft, topRight, bottomRight, bottomLeft] indicatorCorner - (default 0) change the corner radius of a rectangle toggleType - or an array of corners [topLeft, topRight, bottomRight, bottomLeft] shadowColor - (default "rgba(0,0,0,.3)" if shadowBlur) the shadow color - set to -1 for no shadow shadowBlur - (default 14 if shadowColor) the shadow blur - set to -1 for no shadow time - (default .1) time in seconds for toggle to animate (also see ZIM TIME constant) labelLeft - (default null) an optional ZIM Label for the left side of the toggle (or text for default label properties) style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS toggle(state) - toggle the toggle - state defaults to true - set to false to un-toggle hasProp(property as String) - returns true if property exists on object else returns false clone() - makes a copy with properties such as x, y, etc. also copied dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String toggled - gets and sets the toggled state of the toggle text - gets the selected label text or "on" / "off" if no label indicator - access to the indicator object background - access to background Rectangle label - access to the label if provided labelLeft - access to the label on the left if provided enabled - default is true - set to false to disable ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS dispatches a "change" event when pressed but not when toggle() is used ALSO see the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

Tip(text, tipAlign, tipValign, margin, marginH, marginV, outside, target, delay, time, mouseClose, size, font, color, rollColor, shadowColor, shadowBlur, align, valign, lineWidth, lineHeight, backing, outlineColor, outlineWidth, backgroundColor, backgroundBorderColor, backgroundBorderWidth, corner, backgroundDashed, padding, paddingH, paddingV, shiftH, shiftV, rollPersist, labelWidth, labelHeight, maxSize, bold, italic, variant, splitWords, style, group, inherit)

Tip zim class - extends a a zim.Label which extends a zim.Container which extends a createjs.Container DESCRIPTION A Tip() can be used to show some extra information - the tip disappears after an amount of time Tip has easy positioning along the inside edges or the outside edges of a target. NOTE Tip places the tip on the stage when the show() method is called You can reposition with .mov() etc. if desired NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

new Tip("Press Circle").show(1); // wait one second and show tip at 40 pixels from bottom right

const circle = new Circle().center().tap(()=>{
   circleTip.show();
});
const circleTip = new Tip({
   text:"This is a default ZIM Circle",
   backgroundColor:white,
   color:black,
   outside:true, // outside the circle
   target:circle,
   align:CENTER,
   valign:BOTTOM,
   margin:14,
   corner:0,
   size:20
});

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) text - (default "Here's a tip!") String for the the text of the tip tipAlign - (default RIGHT) the horizontal position of the tip (LEFT, CENTER / MIDDLE, RIGHT) tipValign - (default BOTTOM") the vertical position of the tip (TOP, CENTER / MIDDLE, BOTTOM") margin - (default 40) distance from side (unless centered) in pixels marginH - (default margin) distance from horizontal edges marginV - (default margin) distance from vertical edges outside - (default false) set to true to place Tip on outside of container target - (default zdf's stage) tip is placed on stage relative to container delay - (default 0) set the default delay for show() - can override with show() parameters time - (default 2) set the default time for show() - can override with show() parameters mouseClose - (default true) set to false to not hide tip on mouse press ** the rest are parameters for a Label (align and valign are set as textAlign and textValign) size - (default 36) the size of the font in pixels font - (default arial) the font or list of fonts for the text color - (default black) color of font (any CSS color) rollColor - (default color) the rollover color of the font shadowColor - (default "rgba(0,0,0,.3)") set to -1 for no shadow - set to any css color to see shadowBlur - (default 1) if shadow is present align - ((default LEFT) text registration point alignment also CENTER and RIGHT valign - (default CENTER) vertical registration point alignment alse MIDDLE / CENTER, BOTTOM lineWidth - (default false) for no wrapping (use \n) Can set to number for wrap lineHeight - (default getMeasuredLineHeight) set to number to adjust line height backing - (default null) a Display object for the backing of the label (eg. Shape, Bitmap, Container, Sprite) see ZIM Pizzazz module for a fun set of Shapes like Boomerangs, Ovals, Lightning Bolts, etc. outlineColor - (default null - or black if outlineWidth set) - the color of the outline of the text outlineWidth - (default null - or (size*.2) if outlineColor set) - the thickness of the outline of the text backgroundColor - (default null) set to CSS color to add a rectangular color around the label The background color will change size to match the text of the label Note: the backgroundColor is different than a backing which can be any Display Object and background parameters are ignored if a backing parameter is set backgroundBorderColor - (default null) the background stroke color backgroundBorderWidth - (default null) thickness of the background border corner - (default 0) the round of corner of the background if there is one can also be an array of [topLeft, topRight, bottomRight, bottomLeft] backgroundDashed - (default null) set to true for dashed background border (if backgroundBorderColor or backgroundBorderWidth set) padding - (default 10 if backgroundColor set) places the border this amount from text (see paddingH and paddingV) padding parameters are ignored if there is no backgroundColor set (also ignored if a backing parameter is set) paddingH - (default padding) places border out at top bottom paddingV - (default padding) places border out at left and right shiftH - (default 0) move the label (CreateJS Text) inside the Label container horizontally shiftV - (default 0) move the label (CreateJS Text) inside the Label container vertically rollPersist - (default false) set to true to maintain rollover stage as long as mousedown or press is activated (used by Buttons) labelWidth - (default null) the same as the lineWidth - the text will wrap at the labelWidth (added to match labelHeight) labelHeight - (default null) the height of the text - setting this will probably alter the font size - so the size parameter is overwritten for labelHeight to work, the labelWidth must also be set using labelWidth and labelHeight together allow you to fit as much text into specified width and height dimensions maxSize - (default null) set to limit the font size when using labelWidth and labelHeight bold - (default false) set to true to bold the tip italic - (default false) set to true to italic the tip variant - (default false) set to true to set the tip to small caps splitWords - (default false) set to true to split words when wrapping style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS show(delay, time) - show the tip - delay in s defaults to 0 and time in s defaults to 2 (also see ZIM TIME constant) default delay and time can be set with main default and time parameters for Tip() hide() - hides tip - show() will also hide the tip automatically after the time provided clear() - hides tip and removes the call to a delayed tip using a delay time in show() hasProp(property as String) - returns true if property exists on object else returns false clone() - makes a copy with properties such as x, y, etc. also copied dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO see all methods of a Label() such as setColorRange(), etc. ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES tipAlign - get or set the horizontal alignment of the tip tipValign - get or set the vertical alignment of the tip text - get or set the text of the Tip ALSO see all properties of a Label() such as size, color, etc. ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS See the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Pane(content, backgroundColor, color, width, height, draggable, resets, modal, corner, backdropColor, shadowColor, shadowBlur, center, displayClose, backdropClose, backing, fadeTime, container, titleBar, titleBarColor, titleBarBackgroundColor, titleBarHeight, close, closeColor, autoPadding, autoPaddingH, autoPaddingV, keyboardAccess, style, group, inherit)

Pane zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION Adds a window for alerts, etc. You need to call the pane.show() to show the pane and pane.hide() to hide it. You do not need to add it to the stage - it adds itself centered. You can change the x and y (the origin and registration point are in the middle). NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

new Pane("Watch out!", yellow).show(); // pressing anywhere will close pane (see parameters for options)

EXAMPLE

// if app is in an iFrame, this will get keyboardAccess using a hidden F.keyboardMessage()
// good for games that need keyboard if the game is in an iFrame like the Editor or CodePen
// NOTE: do not use the on("close", f) method as it will not receive an event
// with keyboardAccess the events on the canvas are turned off and captured in an any iFrame
new Pane({content:"START", keyboardAccess:true}).show(()=>{zog("Keys ready")});

EXAMPLE

const pane = new Pane({width:600, height:250, modal:false, displayClose:false});
const cancel = new Button(220, 100, "CANCEL", red).center(pane).mov(-130);
const confirm = new Button(220, 100, "CONFIRM", green).center(pane).mov(130);
cancel.on("click", ()=>{pane.hide();});
confirm.on("click", ()=>{zgo("https://zimjs.com")});
pane.show(); // pressing anywhere will close pane (see parameters for options)

EXAMPLE

// as above but using a callback function in show()
const pane = new Pane({width:600, height:250, modal:false, displayClose:false}).show(confirm=>{
   if (confirm) zgo("https://zimjs.com");
});
const cancel = new Button(220, 100, "CANCEL", red).center(pane).mov(-130).tap(()=>{
   pane.hide(false);
});
const confirm = new Button(220, 100, "CONFIRM", green).center(pane).mov(130).tap(()=>{
   pane.hide(true);
});

EXAMPLE

// as above but using CONTENT CONFIG OBJECT
const pane = new Pane({
   width:600,
   height:250,
   modal:false,
   displayClose:false,
   content:{
      buttonScale:1,
      buttons:[
         {
            label:"CANCEL",
            bgColor:red,
            call:()=>{pane.hide();}
         }, {
            label:"CONFIRM",
            bgColor:green,
            call:()=>{zgo("https://zimjs.com");}
         }
      ]
   }
}).show();

EXAMPLE

// custom backing with ZIM Pizzazz import at top
// import zim from "https://zimjs.org/cdn/016/zim_pizzazz"
new Pane({
   content:new Label({color:white, text:"STOP", size:50}),
   backing:makePattern({
      type:"stripes",
      colors:series(red,black),
      rows:20
   }).alp(.8)
}).show();

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) content - (default " ") optional content to be centered in one of three formats: a string or number to add a ZIM Label - color darker a ZIM DisplayObject such as a Circle or a Container with more objects, etc. a content configuration object {} with the following properties - any are optional: header - a ZIM DisplayObject for the top of the content message - text that will put into a ZIM Label - default darker - see color property display - a ZIM DisplayObject for beneath the message buttons - an array of ZIM Button objects or configuration objects {} as follows: {label, color, rollColor, backgroundColor, rollBackgroundColor, call} with call being a callback function for when the button is pressed buttonScale - the scale for the buttons color - the color of the message spacingH - horizontal space between the buttons spacingV - vertical space between the content areas align - default CENTER, or use LEFT or RIGHT backgroundColor - (default white) a css color for the background of the Pane color - (default black) a css color for the text color of the Pane width - (default AUTO) width of pane - AUTO will matches content width - see also autoPadding and autoPaddingH height - (default AUTO) height of pane - AUTO will matches content width - see also autoPadding and autoPaddingV draggable - (default false) pass in true to drag the pane resets - (default true) resets position to start on re-open - set to false to keep last position modal - (default true) pane will close when user clicks off the pane - set to false to keep pane open corner - (default 20) is the corner radius - set to 0 for no corner can also be an array of [topLeft, topRight, bottomRight, bottomLeft] backdropColor - (default "rgba(0,0,0,.2)") the color of the background that fills the stage shadowColor - (default "rgba(0,0,0,.3)") set to -1 for no shadow shadowBlur - (default 20) how blurred the shadow is if shadow is set center - (default true) centers the pane if center is false you will have to set x and y for the pane the registration point and the origin inside the pane is in the center you can adjust the label placement by changing its x and y or registration point displayClose - (default true) closes the Pane if display backing is pressed if draggable is set to true, displayClose will automatically be set to false backdropClose - (default true) closes the Pane if backdrop is pressed backing - (default null) a Display object for the backing of the pane (eg. Shape, Bitmap, Container, Sprite) see ZIM Pizzazz module for a fun set of Shapes like Boomerangs, Ovals, Lightning Bolts, etc. as well as patterned backings using Pizzazz 3 fadeTime - (default 0) seconds to fade in and out - also see ZIM TIME constant container - (default - the default stage) container for the pane titleBar - (default null - no titleBar) a String or ZIM Label title for the pane that will be presented on a titleBar across the top titleBarColor - (default black) the color of the titleBar text if a titleBar is requested titleBarBackgroundColor - (default "rgba(0,0,0,.2)") the background color of the titleBar if a titleBar is requested titleBarHeight - (default fit label) the height of the titleBar if a titleBar is requested close - (default false) - a close X for the top right corner that closes the pane when pressed closeColor - (default grey) - the color of the close X if close is requested autoPadding - (default 70) the padding used by AUTO width or height autoPaddingH - (default autoPadding) the padding used by AUTO width autoPaddingV - (default autoPadding) the padding used by AUTO height keyboardAccess - (default false) set to true to adds a click through iframe to gain keyboard control this sets an invisible Frame keyboardMessage() that will close the pane and give key access to iFrames do not use if expecting interactive content in the Pane - it is for a start message only do not use on("close", f) as it will not be captured with keyboardAccess true instead, use the callback in show() to call a function on close style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS show(call, params) - shows the pane (returns the pane for chaining) pass in an optional callback function that will be called when the pane closes pass in an optional params object that will be passed to the callback when the pane closes also see the closeCall and closeParams property to set these dynamically for instance, if the pane has YES and NO buttons, the closeParams can be set to true or false for easy results to an option pop-up (as of ZIM ZIM 01 can also use pos(), loc(), center(), etc.) hide(params, callEvent) - hides the pane params will set the closeParams property that gets sent to a callback function in the show() callEvent defaults to false - set to true to also call close event (as of ZIM ZIM 01 can also use removeFrom()) toggle(state - default null) - shows if hidden and hides if showing (returns the pane for chaining) or pass in true to show pane or false to hide pane add(obj, index, center, replace) - supports DUO - add object to the content container with optional center or just add content like usual to the contentContainer. index is the level in the contentContainer - default is the top center (default true) for Pane (different than Panel and Window which have false as default) replace (default true) for Pane (different than Panel and Window which have false as default) will replace the current content with the new content see also content parameter of Pane and contentContainer property returns the pane for chaining hasProp(property as String) - returns true if property exists on object else returns false clone() - makes a copy with properties such as x, y, etc. also copied (returns the new pane for chaining) dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String closeCall - a function to call when the pane closes (see also call parameter of show method) closeParams - an object to pass to the closeCall (see also params parameter of show method) backing - or display - reference to the pane box contentContainer - ZIM Container used to hold added content (formerly the content property) use the add() method or add directly to the contentContainer property of the pane content - gives access to the content provided as a parameter to the Pane() ** in the past, content refered to what is now the contentContainer If a content config object {} is used, the following properties are added to the Pane() header - reference to the header if provided message - reference to the message if provided - this is a Label text - reference to the text of the message if provided display- reference to the display if provided buttons - an array of the Button objects if provided config - the original content config object {} titleBar - gives access to the titleBar Container - which also has a background property titleBarLabel - gives access to the titleBar label toggled - read-only Boolean property as to whether pane is showing close - access to the ZIM Shape if there is a close X backdrop - reference to the backdrop that covers the stage container - get or set the container the pane will be added to resetX - if reset is true you can dynamically adjust the position if needed resetY - and the y position for reset... enabled - set to false to disable component ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. OPTIMIZED This component is affected by the general OPTIMIZE setting (default is false) if set to true, you will have to S.update() after setting certain properties and S.update() in change event to see component change its graphics ACTIONEVENT This component is affected by the general ACTIONEVENT setting The default is "mousedown" - if set to something else the component will act on click (press) EVENTS dispatches a "closing" event when about to be closed - good for reloading a game for instance dispatches a "close" event when closed by clicking on backing, display, close, etc. when applicable see also call and params parameters of show() plus closeCall and closeParams properties see also params parameter of hide() which also sets the closeParams property dispatches a "change" event when closed by clicking on backing, display, close, etc. when applicable dispatches a "fadedin" event if fadeTime is set and pane has finished its fade in animation dispatches a "fadedout" event if fadeTime is set and pane has finished its fade out animation ALSO see the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

Panel(width, height, content, titleBar, titleBarColor, titleBarBackgroundColor, titleBarHeight, backgroundColor, borderColor, borderWidth, corner, close, closeColor, next, nextColor, extraButton, collapse, collapseColor, collapsed, align, shadowColor, shadowBlur, draggable, boundary, style, group, inherit)

Panel zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION A simple panel with titleBar and optional arrow for more panels. Panel can be set draggable and can have a collapse button and a close button See: https://zimjs.com/explore/panel.html NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// make a panel with two pages
const panel = new Panel({titleBar:series("TODAY", "TOMORROW")})
.center();

// content for panel 1
const today = new Circle(30, yellow);
panel.add(today, 0, true); // content, level, center on content

// content for panel 2
const tomorrow = new Label("-30");

// event to change content as panels change
panel.on("change", ()=>{
   if (today.parent) {
      panel.add(tomorrow, 0, true, true); // content, level, center and replace
   } else {
      panel.add(today, 0, true, true); // content, level, center and replace      
   }
   S.update();
});

EXAMPLE

const panel = new Panel({
   width:400,
   height:250,
   bgColor:new GradientColor([black,dark],90),
   titleBar:"CONTENT",
   draggable:true,
   content:{
      message:"We shall greet you!",
      color:lighter, // override default darker
      display:new TextInput({placeholder:"enter name"}).sca(.7),
      align:CENTER,   // default
      spacingV:25,    // 20 is default
      spacingH:10,    // default
      buttonScale:.5, // default
      buttons:[ // or just a single button object
         {
            label:"GREET",
            bgColor:new GradientColor([green,blue],90),
            width:300,
            call:()=>{
               new Emitter({
                  obj:new Label("Hello "+panel.display.text, 80, null, [green,blue,orange,yellow,pink]),
                  startPaused:true,
                  shrink:false,
                  life:2,
                  gravity:2,
                  force:{min:2,max:6}
               }).loc(panel).spurt(20).on("spurtfizzed",e=>{e.target.dispose();});
            }
         }, {
            // button:new Button(), // can also specify a custom Button
            label:"CLEAR",
            bgColor:new GradientColor([yellow,orange],90),
            call:()=>{panel.display.text="";}
         }
      ]
   }
}).centerReg();

CLOSE ▲

Window(width, height, content, backgroundColor, borderColor, borderWidth, padding, corner, swipe, scrollBarActive, scrollBarDrag, scrollBarColor, scrollBarAlpha, scrollBarFade, scrollBarH, scrollBarV, slide, slideFactor, slideSnap, slideSnapDamp, interactive, shadowColor, shadowBlur, paddingH, paddingV, scrollWheel, damp, titleBar, titleBarColor, titleBarBackgroundColor, titleBarHeight, draggable, boundary, onTop, close, closeColor, cancelCurrentDrag, fullSize, fullSizeColor, resizeHandle, collapse, collapseColor, collapsed, optimize, resizeBoundary, resizeVisible, continuous, style, group, inherit)

Window zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION Adds a window for content that can be swiped and scrolled. NOTE if zim namespace zns = true then this overwrites a JS Window - so the JS Window is stored as document.Window NOTE set the enable property to false if animating the position of the whole Window then set the enable property to true on the animate call function. See update() method for more. NOTE to add ZIM Swipe() to objects in window set the overrideNoSwipe parameter of Swipe to true NOTE if animating the window off screen then either turn optimize:false or use window.update() in the "animation" event with the animate({events:true}) NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const w = new Window({scrollBarDrag:true, padding:20}).center();
const t = new Tile(new Circle(20, red), 4, 20, 20, 20);
w.add(t);
// the above would only drag on the circles (or the scrollbars)
// adding a Rectangle to help dragging
w.add(new Rectangle(w.width-20,t.height,dark), 0);
// or could have added it to the bottom of the Tile
// new Rectangle(w.width-20,t.height,dark).addTo(t).bot();

EXAMPLE

// Make two windows resize based on one resizeHandle
// We will use a List which extends a Window
// See https://zimjs.com/explore/splitter.html

const listWidth = 200;
const windowWidth = 600;
const margin = 50;

const list = new List({
   width:listWidth+windowWidth,
   align:LEFT,
   scrollBarDrag:true,
   resizeHandle:true,
   resizeBoundary:new Boundary(-listWidth-windowWidth+margin,0,listWidth+windowWidth-margin*2, 0),
   // resizeVisible:true
})
   .resize(listWidth)
   .pos(120,-80,LEFT,CENTER);
list.items[1].label.text = "Some very long but important option!";

list.on("resize", ()=>{
   const point = list.resizeHandle.localToGlobal(0,0);
   win.resize(list.x+listWidth+windowWidth-point.x);
   win.x = point.x;
});

const win = new Window({
   width:windowWidth,
   height:list.height,
   paddingH:20
}).loc(list).bot().mov(list.width);
win.add(new Pack());

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) width - (default 300) the width of the window height - (default 200) the height of window - including the titleBar if there is a titleBar content - (default null) optional content to be centered in one of three formats: a string or number to add a ZIM Label - default white a ZIM DisplayObject such as a Circle or a Container with more objects, etc. a content configuration object {} with the following properties - any are optional: ** see Panel() and Pane() for examples of content configuration object being used header - a ZIM DisplayObject for the top of the content message - text that will put into a ZIM Label - default color white - see color property display - a ZIM DisplayObject for beneath the message buttons - an array of ZIM Button objects or configuration objects {} as follows: {label, color, rollColor, backgroundColor, rollBackgroundColor, call} with call being a callback function for when the button is pressed buttonScale - the scale for the buttons color - the color of the message spacingH - (default 20*buttonScale) horizontal space between the buttons spacingV - (default 20) vertical space between the content areas scrollBar - set to true if a default scrollBar is present or a number if custom backgroundColor - (default dark) background color (use clear - or "rbga(0,0,0,0)" for no background) borderColor - (default silver) border color borderWidth - (default 1) the thickness of the border padding - (default 0) places the content in from edges of border (see paddingH and paddingV) padding is ignored if content x and y not 0 - and really only works on top left - so more like an indent corner - (default 0) is the rounded corner of the window (does not accept corner array - scrollBars are too complicated) swipe - (default auto/true) the direction for swiping set to none / false for no swiping also can set swipe to just vertical or horizontal scrollBarActive - (default true) shows scrollBar (set to false to not) scrollBarDrag - (default false) set to true to be able to drag the scrollBar scrollBarColor - (default borderColor) the color of the scrollBar scrollBarAlpha - (default .3) the transparency of the scrollBar scrollBarFade - (default true) fades scrollBar unless being used scrollBarH - (default true) if scrolling in horizontal is needed then show scrollBar scrollBarV - (default true) if scrolling in vertical is needed then show scrollBar slide - (default true) Boolean to throw the content when drag/swipe released slideFactor - (default .9) is the factor multiplied by dragging velocity (1 no slowing, .7 fast slowing) slideSnap - (default true - false if no vertical scroll) slides past boundary and then snaps back to boundary when released also VERTICAL, HORIZONTAL, and false slideSnapDamp - (default .1) the damping to snap back to boundary interactive - (default true) allows interaction with content in window set to false and whole window will be swipeable but not interactive inside shadowColor - (default rgba(0,0,0,.3)) the color of the shadow shadowBlur - (default 20) set shadowBlur to -1 for no drop shadow paddingH - (default padding) places content in from left and right (ignored if content x not 0) paddingV - (default padding) places content in from top and bottom (ignored if content y not 0) scrollWheel - (default true) scroll vertically with scrollWheel damp - (default null) set to .1 for instance to damp the scrolling titleBar - (default null - no titleBar) a String or ZIM Label title for the window that will be presented on a titleBar across the top titleBarColor - (default black) the text color of the titleBar if a titleBar is requested titleBarBackgroundColor - (default "rgba(0,0,0,.2)") the background color of the titleBar if a titleBar is requested titleBarHeight - (default fit label) the height of the titleBar if a titleBar is requested draggable - (default true if titleBar) set to false to not allow dragging titleBar to drag window boundary - (default null) set to ZIM Boundary() object - or CreateJS.rectangle() onTop - (default true) set to false to not bring Window to top of container when dragging close - (default false) - a close X for the top right corner that closes the window when pressed closeColor - (default grey) - the color of the close X if close is requested cancelCurrentDrag - (default false) - set to true to cancel window dragging when document window loses focus this functionality seems to work except if ZIM is being used with Animate - so we have left it turned off by default fullSize - (default false) - set to true to add a fullsize icon to the titleBar to let user increase the size of the window to the frame - will turn into a reduce size icon fullSizeColor - (default grey) - the color of the fullSize icon resizeHandle - (default false) - set to true to rollover bottom right corner to resize window with resizeHandle collapse - (default false) - set to true to add a collapse button to the titleBar that reduces the window so only the bar shows and adds a button to expand also can double click bar to collapse window collapseColor - (default grey) the color of the collapse icon collapsed - (default false) set to true to start the window collapsed optimize - (default true) set to false to not turn DisplayObjects visible false if they are not on within 300 pixels of the window as the Window is scrolled, any objects within the content and any objects within one level of those objects are set to visible false if their bounds are not hitting the the window bounds + 300 - thanks Ami Hanya for the suggestion also see optimize property resizeBoundary - (default null) add a ZIM Boundary() object for the resize handle - relative to the resize handle start position new Boundary(-100, 0, 200, 0) - would allow the resize handle to move to the left or right 100 pixels but not up or down new Boundary(0, -100, 0, 200) - would allow the resize handle to move to up or down 100 pixels but not left or right new Boundary(0,0,100,100) - would allow the window to expand in x or y 100 pixels but not grow smaller new Boundary(-100,-100,100,100) - would allow the window to shrink in x or y 100 pixels but not grow bigger resizeVisible - (default false) set to true to always see the resizeHandle - if resizeHandle is set to true continuous - (default false) set to true (or VERTICAL) to lock window to vertical access and ignore boundary or set to HORIZONTAL to lock window to horizontal and ignore boundary used internally for when scrolling should not be limited but rather wrapped such as with ZIM List with continuous:true will set scrollBarActive to false style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS add(obj, index, center, replace) - supports DUO - parameters or single object with properties that match parameters adds obj to content container of window (at padding) must have bounds set you can add individual objects but may find it easier to make a Container with dimensions then add and position objects in the container and add the container. If adding individual objects and adjusting their x and y or scale, do so first and then add() or if adjusting after adding and the object goes outside the window size then you should call update() which will reset the scrollbars. index is the level or layer in the content with 0 being at the bottom center will center the content in the visible window replace defaults to false and if set to true, removes all content then adds the obj. returns window for chaining remove(obj) - removes object from content container of window and updates - returns window for chaining removeAll() - removes all objects from content container of window and updates - returns window for chaining resize(width, height) - resizes the Window without scaling the content (also calls update() for scroll update) width and height are optional - returns window for chaining update() - resets window scrolling if perhaps the content gets bigger or smaller update() does not quite update the dragBoundary due to a timeout in waiting for scrolls to be set so if animating the position of a window, set the enable property to false before animating then set the enable property to true on the animate call function cancelCurrentDrag() - stop current drag on window - but add dragging back again for next drag fullSize(state) - state defaults to true to set window to fullsize or set to false to go back to normal must start with the fullSize parameter set to true also see fullSized property collapse(state) - state defaults to true to collapse or set to false to expand collapsed window must start with the collapse parameter set to true also see collapsed property clone(recursive) - makes a copy with properties such as x, y, etc. also copied recursive (default true) clones the window content as well (set to false to not clone content) dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String backing - CreateJS Shape used for backing of Window backgroundColor - the color of the backing borderColor - the color of the border borderWidth - the width of the border contentContainer - ZIM Container used to hold added content (formerly the content property) content - gives access to the content provided as a parameter to the Window() ** in the past, content refered to what is now the contentContainer If a content config object {} was passed in the following properties are added to the Window() header - reference to the header if provided message - reference to the message if provided - this is a Label text - reference to the text of the message if provided display- reference to the display if provided buttons - an array of the Button objects if provided config - the original content config object {} optimize - see optimize parameter - set to true (default) or false to optimize scrolling of Window enabled - get or set whether the Window is enabled scrollEnabled - get or set whether the Window can be scrolled scrollBar - data object that holds the following properties (with defaults): you can set after object is made - call window.update() to see change scrollBar.horizontal = zim Shape // the horizontal scrollBar rectangle shape scrollBar.vertical = zim Shape // the vertical scrollBar rectangle shape scrollBar.color = borderColor; // the color of the scrollBar scrollBar.size = 6; // the width if vertical or the height if horizontal scrollBar.minSize = 12; // for the height if vertical or the width if horizontal scrollBar.spacing = 3 + size + borderWidth / 2; scrollBar.margin = 0; // adds extra space only at end by scrollBars scrollBar.corner = scrollBar.size / 2; scrollBar.showTime = .5; // s to fade in scrollBar.fadeTime = 3; // s to fade out scrollBar.speed = .5 // scrollwheel speed for x and y scrolling with mouse wheel scrollX - gets and sets the content x position in the window (this will be negative) scrollY - gets and sets the content y position in the window (this will be negative) scrollXMax - gets the max we can scroll in x based on content width - window width (plus padding and margin) scrollYMax - gets the max we can scroll in y based on content height - window height (plus padding and margin) titleBar - access to the ZIM Container for the titleBar if there is a titleBar also has a backing property titleBarLabel - access to the ZIM Label of the titleBar if there is a titleBar closeIcon - access to the ZIM Shape if there is a close X fullSizeIcon - access to the ZIM Container if there is a fullSize icon fullSized - get or set whether the window is full sized - must start with fullSize parameter set to true also see fullSize() method collapseIcon - access to the ZIM Shape if there is a collapse triangle collapsed - get or set whether the window is collapsed - must start with collapse parameter set to true also see collapse() method resizeHandle - access the ZIM Rectangle that makes up the resizeHandle when resizeHandle parameter is set to true resizeHandle.removeFrom() would stop resize from being available and resizeHandle.addTo(window) would activate it again continuous - get if window is set to continuous - see continuous parameter ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS dispatches a "select" event when clicked on in a traditional manner (fast click with little movement) dispatches a "hoverover" event when rolled on without moving for 300 ms dispatches a "hoverout" event when not hovering due to movement or mouseout on the window dispatches a "scrolling" event when the window scrolls dispatches a "close" event when the window is closed with the x on the titleBar if there is a titleBar dispatches a "slidestart" event if slide is true and window starts sliding (on pressup) dispatches a "slidestop" event if slide is true and window stops sliding dispatches a "resize" event if resizing dispatches a "collapse" event if collapsing dispatches a "expand" event if expanding after being collapsed dispatches a "fullsize" event if made fullscreen dispatches a "originalsize" event if reduced from fullscreen ALSO see the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

Page(width, height, color, color2, angle, corner, pattern, scalePattern, cache, style, group, inherit)

Page zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION ZIM Page() is a Container() with Rectangle() backing. For years, many questions were asked - how to make a page in ZIM. Now, we have decided to officially answer that! ZIM Page(). An easy way to handle linear gradients is provided as well as a custom background such as a ZIM Pizzazz pattern. To keep things brief, Page is expected to fit the stage. So border, corner, dashed, etc. has been left out. If the page is smaller and these are desired... old-school-it and make a Container and add the desired Rectangle. SEE: https://zimjs.com/cat/page.html SEE: Docs for ZIM Pages() as well to handle multiple pages. SEE: ZIM Panel(), ZIM Pane() and ZIM Window() for alternatives. NOTE A Page object will start with one child or two children if a pattern is specified. NOTE Do not use Page with Layout as it will overlay the region backgroundColors - instead use a Container NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const page = new Page(W, H, red, pink).addTo();
page.title = new Label("A Page!").loc(100,100,page);
page.content = new Circle().center(page);
page.nav = new Tabs().pos(0,100,CENTER,BOTTOM,page);

CLOSE ▲

Central(width, height, style, group, inherit)

Central zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION ZIM Central() is a Container() with its origin and registration point in the center. It will resize to the stage so that it stays in the middle. The container will scale only to fit within the stage height. This is the same functionality as the classic three.js full window scaling. Note, that the origin is in the middle of the stage - also like three.js but the y values still are negative going up and positive going down like usual ZIM. Objects would then be added to Central rather than the stage to emulate this form of scaling. This may work well with three.js on top of beneath ZIM using the Three helper module There is a lay parameter that can be set to UNDER or OVER. The interactive parameter can be set to true to control three.js or false to control ZIM. Set the Frame scaling to FULL and add ZIM content to a Central to match the scaling of three.js. See https://zimjs.com/three/central.html NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// most likely in a FULL Frame scaling mode
const central = new zim.Central()
   .addTo(); // or center() or centerReg() - will always just centerReg()
const circle = new Circle(100)
   .center(central).alp(.5);
new Slider({max:1, value:.5})
   .pos(0,200,CENTER,CENTER,central)
   .wire(circle, "alpha");

PARAMETERS ** supports OCT - parameter defaults can be set with STYLE control (like CSS) width - (default 1024) the width of the container - just use to adjust overall scale height - (default 768) the height of the container - just use to adjust overall scale style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS See the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Layer(width, height, titleBar, titleBarContainer, backgroundColor, rollBackgroundColor, selectedBackgroundColor, selectedRollBackgroundColor, color, rollColor, selectedColor, selectedRollColor, borderWidth, borderColor, dashed, transformObject, titleBarWidth, titleBarHeight, titleBarX, titleBarY, titleBarDraggable, close, closeColor, closeBackgroundColor, closeIndicatorColor, anchor, onTop, style, group, inherit)

Layer zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION Layer is a ZIM Container with transform controls. ZIM transform() objects have their mousechildren turned off so they can be dragged and transformed. This means there can be no interactivity inside the transformed object. Layer provides a solution to nest transformed objects in transformable containers. It does so by providing a titleBar that can be used to turn on and off the transform of the container and allow its contents to be transformed when the transform controls of the Layer are turned off. This is more than just hiding the transform tools but rather removing and adding them. The Layer titleBar will always remain visible on the stage If the Layer is moved (not by its titleBar) so that the titleBar hits the edge, then the titleBar will become anchored to the edge (unless anchor is set to false) This creates an independent titleBar that can be moved to any location. The titleBarPos() method can also be used to separate the titleBar at any time. Drop the titleBar on the top left corner of the Layer or doubleClick it to snap it back on to the layer NOTE Layers can be added to a Transform Manager and saved with the persist sytem. NOTE Layers can be added to Layers (nested) along with any other type of DisplayObject content. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) SEE: https://zimjs.com/explore/layer.html EXAMPLE

// adding the Layers above the content will allow pressing Layer titleBar objects inside other Layers
// adding everything right on the stage would not allow pressing titleBars inside other Layers - either way may be best, depending on content
const content = new Container(W, H).addTo();
const layers = new Container(W, H).addTo();

// create an outer layer with two inner layers - one holding a circle and the other two circles
const layer0 = new Layer(800, 500, "LAYER 0", layers).center(content);
const layer1 = new Layer(300, 400, "LAYER 1", layers).loc(50,50,layer0);
const circle1 = new Circle(50, pink).center(layer1).transform({visible:false});
const layer2 = new Layer(300, 400, "LAYER 2", layers).pos(50,50,true,false,layer0);
const circle2 = new Circle(50, green).center(layer2).mov(0, -80).transform({visible:false});
const circle3 = new Circle(50, blue).center(layer2).mov(0, 80).transform({visible:false});

// optionally store transforms
const t = new TransformManager([layer0, layer1, layer2, circle1, circle2, circle3], "layersID");
// t.clearPersist("layersID")

timeout(1, ()=>{
   layer2.resetTitleBar();
   layer2.turnOn();

   // if moving manually, must call resize()
   layer2.mov(30);
   layer2.resize();
   S.update();
});

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) width - (default 500) the width of the Layer Container height - (default 500) the height of the Layer Container not including the titleBar (which is not in the Container) titleBar - (default "LAYER") a String or ZIM Label for the titleBar titleBarContainer - (default null - zdf' stage) a container for the titleBar can group these with other Layers and hide them all by hiding the container for instance this also can help layer the titleBars above the content backgroundColor - (default lighter) the background color of the titleBar rollBackgroundColor - (default white) the roll background color of the titleBar selectedBackgroundColor - (default granite) the selected background color of the titleBar color - (default granite) the color of the titleBar text rollColor - (default granite) the roll color of the titleBar text selectedColor - (default moon) the selected color of the titleBar text borderWidth - (default 1) the width of the ghost outline when the Layer is not selected to adjust the transform controls border width use the transformObject parameter and set the borderWidth property borderColor - (default borderColor) the color of the ghost outline when the Layer is not selected to adjust the transform controls border color use the transformObject parameter and set the borderColor property dashed - (default true) the dashed of the ghost outline when the Layer is not selected to adjust the transform controls border dashed use the transformObject parameter and set the dashed property transformObject - (default {borderColor:selectedBackgroundColor}) any of the transform parameters as an object literal certain properties are overwritten by Layer as follows: {events:true, visible:false, ghostColor:borderColor, ghostWidth:borderWidth, ghostDashed:dashed, ghostHidden:true} use the transformControls.show() to show the transform controls once the Layer is made for instance: timeout(.1, function(){layer.transformControls.show();}); // a timeout is needed as Layer gets created - sorry. titleBarWidth - (default 100 + 30 if close) the width of the titleBar. 30 pixels will be added if close is true titleBarHeight - (default 40) the height of the titleBar titleBarX - (default null) the starting x position of the titleBar - see also titleBarPos() and resetTitleBar() methods titleBarY - (default null) the starting y position of the titleBar - see also titleBarPos() and resetTitleBar() methods titleBarDraggable - (default true) set to false to not let the titleBar be dragged. this is useful with the titleBarPos() to create a stationary menu for the layers - for instance along the edge like tabs close - (default true) - set to false to not use the close checkbox WARNING: without the close checkbox, the user may make the layer bigger than the stage and not be able to deselect the layer closeColor - (default selectedBackgroundColor) the border of the close checkBox closeBackgroundColor - (default selectedBackgroundColor) the backgroundColor of the close checkBox closeIndicatorColor - (default selectedColor) the indicator color of the close checkBox anchor - (default true) set to false to not anchor the titleBar to the edge if dragged with the Layer (not the titleBar) with anchor true, the user can dock the titleBar to the edges and then drag them to any desired location the user can snap the titleBar back on the layer by dropping it on the top left corner of the layer or double clicking the titleBar onTop - (default true) set to false to not bring the layer on top when selected style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS titleBarPos(x, y, right, bottom) - position the titleBar in the titleBarContainer - returns object for chaining This will undock the titleBar from the Layer so it can be moved independently unless titleBarDraggable is set to false See also titleBarX and titleBarY parameters to start titleBars at a certain position resetTitleBar() - dock the titleBar back on the Layer - returns object for chaining toggle(state) - toggle the controls or turn on or off the controls by providing a Boolean state - returns object for chaining resize(dispatch) - resize the Layer and its children if Layer is manually adjusted - returns object for chaining for instance, layer.x = 10; layer.resize(); otherwise, the transform controls are broken! normal layer transforming using the controls automatically resize. Setting dispatch to true will dispatch a "transformed" event hasProp(property as String) - returns true if property exists on object else returns false clone() - makes a copy with properties such as x, y, etc. also copied (returns the new waiter for chaining) dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String transformControls - the transform transformControls object - see below for a description anchor - get or set whether the titleBar will anchor to the edges of the titleBarContainer toggled - read only if Layer has its transform turned on - or use transformControls.visible use toggle(state) to toggle controls or pass in true for show controls or false for hide controls titleBar - access to the ZIM Container that holds the titleBar titleBarDraggable - get or set whether the titleBar can be dragged use with titleBarPos() to permanently positing the titleBar checkBox - access to the ZIM CheckBox that shows when the Layer is active and close is true button - access to the ZIM Button that makes up the titleBar label - access to the ZIM Label that is on the Button for the titleBar ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the transformControls property described below for more options. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. TRANSFORM CONTROLS OBJECT Layer receives a transformControls property This may be slightly delayed as Layer is prepared on stage var layer = new Layer().center(); timeout(100, function(){zog(layer.transformControls);}); // will probably do the trick The transformControls property holds the following: TRANSFORM CONTROL OBJECT PROPERTIES visible - read only whether the controls are visible ghost - read only as to whether the ghost outline is showing - set with showGhost and hideGhost ghostEnabled - read only as to whether the ghost outline will be turned on and off - set with addGhost and removeGhost scaleControls - reference to the Container that holds the corner boxes for scaling stretchXControls - reference to the Container that holds the left and right boxes for stretching stretchYControls - reference to the Container that holds the top and bottom boxes for stretching rotateControls - reference to the Container that holds the outer circles for rotating TRANSFORM CONTROL OBJECT METHODS hide() - hides the controls - returns object for chaining show() - shows the controls - returns object for chaining recordData(toJSON) - returns an object with type, x, y, scaleX, scaleY, rotation, skewX, skewY, visible PROPERTIES if toJSON (default false) is set to true, the return value is a JSON string setData(data, fromJSON) - sets the properties to match the data object passed in - this should come from recordData() if fromJSON (default false) is set to true, it will assume a JSON string is passed in as data returns object for chaining remove(noHide) - removes the controls - set noHide true if already hidden add(noShow) - adds the controls back if then have been removed - set noShow true if not wanting to show allowToggleOn() - sets the show / hide controls on with click allowToggleOff() - removes the show / hide controls on with click showGhost() - show the ghost outline - the ghostWidth or ghostColor must be set in initial parameters hideGhost() - hide the ghost outline toggleGhost(state) - if ghost is showing will hide ghost and if ghost is hidden will show ghost or set state to true to show ghost or false to not show ghost addGhost() - enable ghost outline functionality - the ghostWidth or ghostColor must be set in initial parameters removeGhost() - disable ghost outline functionality disable() - may show the controls if visible but cannot use them enable() - turns the using of the controls back on resize(dispatch) - call resize if the object is transformed in ways other than with the controls set dispatch to true to dispatch a "transformed" event - if manually adjusted this will save to TransformManager EVENTS dispatches a "transformed" event when being transformed the transformed event object has a transformType property the transformType property has values of "size", "move", "rotate", "stretch", "reg", "reset" the transformType also might be "resize" if resize(true) is called to dispatch a transformed event the transformed event object also has a pressup property that is true if on pressup and null if from pressmove dispatches "transformshow" and "transformhide" events for when click to hide or show controls If TransformManager() is used there are more events available such as "persistset", etc. See the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

Waiter(container, speed, foregroundColor, backgroundColor, corner, shadowColor, shadowBlur, fadeTime, style, group, inherit)

Waiter zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION Adds a little animated three dot wait widget. You need to call waiter.show() to show the waiter and waiter.hide() to hide it. You do not need to add it to the stage - it adds itself centered. You can change the x and y (with origin and registration point in middle). NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const waiter = new Waiter().show(); // show the waiter until assets load
F.loadAssets("cave02.jpg", "https://zimjs.org/assets/");
F.on("complete", ()=>{
waiter.hide();
new Pic("cave02.jpg").center();
S.update();
});

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) container - (default first frame's stage) the container that holds the waiter speed - (default .6) cycle time in seconds (also see ZIM TIME constant) foregroundColor - (default white) the dot color backgroundColor - (default "orange") the background color corner - (default 14) the corner radius of the waiter box can also be an array of [topLeft, topRight, bottomRight, bottomLeft] shadowColor - (defaults rgba(0,0,0,.3)) set to -1 for no shadow shadowBlur - (default 14) the blur of the shadow if shadow is set fadeTime - (default 0) milliseconds to fade in and out style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS show() - shows the waiter (returns the waiter for chaining) hide() - hides the waiter toggle(state - default null) - shows waiter if hidden and hides waiter if showing (returns the object for chaining) or pass in true to show waiter or false to hide waiter hasProp(property as String) - returns true if property exists on object else returns false clone() - makes a copy with properties such as x, y, etc. also copied (returns the new waiter for chaining) dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String display - reference to the waiter backing graphic ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS See the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

ProgressBar(barType, foregroundColor, backgroundColor, borderColor, borderWidth, padding, label, color, labelPosition, percentage, corner, shadowColor, shadowBlur, backing, delay, fastClose, container, autoHide, width, style, group, inherit)

ProgressBar zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION Adds a little progress bar that can be scaled if desired Pass in to progress parameter of the Frame or LoadAssets call to operate or use on its own with the show(), hide() methods and percent property NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const progressBar = new ProgressBar();
F.loadAssets({assets:"greeting.mp3", progress:progressBar});
// a bar will be centered on the default stage (or specify a container)
// the bar will show a percentage of asset bytes loaded
F.on("complete", ()=>{
   // the bar will be removed when loading is complete
   // must have interacted previously to play sound...
   new Aud("greeting.mp3").play();
});

EXAMPLE

// testing progress bar:
new ProgressBar({barType:"rectangle"}).show().run(2); // run for 2 seconds

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) barType - (default "circle") set "rectangle" for rectangular progress bar foregroundColor - (default green) the color of the bar backgroundColor - (default dark) the color of the background borderColor - (default backgroundColor) the color of the border - for "rectangle" barType borderWidth - (default 10 "circle" or 0 "rectangle") the width of the border (or ring for "circle" barType) padding - (default 2 for "circle" or 0 for "rectangle") the space between the bar and the backing label - (null) set to a String or a ZIM Label to specifify label properties color - (default foregroundColor) the color of the label if there is one labelPosition - ("bottom" if label specified) also set to TOP to move label above progress bar percentage - (default false) set to true to show percentage after label (set label to "" for only percentage) corner - (default 15 for "rectangle" barType) set to 0 for square corners, etc. can also be an array of [topLeft, topRight, bottomRight, bottomLeft] shadowColor - (default rgba(0,0,0,.3)) set to -1 for no shadow shadowBlur - (default 14) the blur of the shadow if shadow is set backing - (default null) a Display object for the backing of the "rectangle" barType (eg. Shape, Bitmap, Container, Sprite) See ZIM Pizzazz 3 - for patterns - these have a type of "Pattern" which makes them special If a "pattern" is used then the normal backing will be used to mask the pattern delay - (default .1) seconds to delay view of progress bar - helps not flash progress bar when content is cached (also see ZIM TIME constant) fastClose - (default true) hide as soon as progress is done The complete event is delayed slightly after the progress bar is loaded Set to false to wait until the complete event triggers before removing the progress bar container - (defaultFrame's stage) or specify a container to hold the progress bar autoHide - (default true) set to false so bar does not hide when reaching 100% width - (default 20/200 for circle/rectangle) set the width of the bar (for the circle the width is diameter) style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS show() - shows the progress bar (returns the progress bar for chaining) hide() - hides the progress bar toggle(state - default null) - shows progress bar if hidden and hides progress bar if showing (returns the object for chaining) or pass in true to show progress bar or false to hide progress bar run(time, close) - shows and runs the progress bar for the given time (default 3s) (also see ZIM TIME constant) setting close to true or false will set the main class autoHide setting thanks Racheli Golan for the request setBacking(backing) - change the backing of the progress bar hasProp(property as String) - returns true if property exists on object else returns false clone() - makes a copy with properties such as x, y, etc. also copied (returns the new waiter for chaining) dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String percent - get or set the percent (0-100) complete of the progress bar label - reference to the label if there is one backing - reference to the backing shape. This may be the backing DisplayObject if provided the backing will have a pattern property if a pattern is set for the backing bar - reference to the bar shape toggled - read-only Boolean that is true if progress bar is showing otherwise false ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. group - used when the object is made to add STYLE with the group selector (like a CSS class) EVENTS Dispatches a "complete" event when the loading or running is complete See the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

Indicator(width, height, num, foregroundColor, backgroundColor, borderColor, borderWidth, backdropColor, corner, indicatorType, selectedIndicatorType, fill, scale, lightScale, interactive, shadowColor, shadowBlur, index, backgroundAlpha, selectedIndex, style, group, inherit)

Indicator zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION A row of dots or squares that can be used to indicate a step, page, level, score, etc. The indicator can be used as an input as well but often these are small so may not be best to rely on. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const lights = new Indicator({fill:true});
lights.index = 0; // set the first light on
lights.center();
S.on("stagemousedown", ()=>{
   // increase the indicator lights each click (then start over)
   lights.index = (lights.index+1) % lights.num;
});
S.update();

EXAMPLE

// lightening indicator!
new Indicator({
   indicatorType:new Emoji("\u26a1\ufe0f"),
   fill:true,
   interactive:true
}).center();

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) width - (default 100) width of indicator height - (default 50) height of indicator num - (default 6) the number of lights foregroundColor - (default "orange") color of the light(s) turned on backgroundColor - (default grey) color of the light(s) turned off borderColor - (default -1 for no border) border color of lights and backdrop (if backdrop) borderWidth - (default 1 if stroke is set) the size of the stroke in pixels backdropColor - (default -1 for no backdrop) backdrop rectangle around lights corner - (default 0) the corner radius if there is a backdropColor provided can also be an array of [topLeft, topRight, bottomRight, bottomLeft] indicatorType - (default "dot" or "circle") can also be "box" or "square", "heart", "star" or pass in a ZIM Emoji and Indicator will fade alpha to backgroundAlpha parameter setting for unselected emojis or pass any DisplayObject and the this will be used selectedIndicatorType - (default indicatorType) - see indicatorType parameter for options this will be shown for all the selected indicators fill - (default false) set to true to fill in lights (or show selected indicators) to the left of the index scale - (default 1) for all the lights including spacing lightScale - (default 1) scale for each light - keeping the spacing unchanged interactive - (default false) set to true to make lights clickable clicking on first light when first light is only light on, will toggle light shadowColor - (default rgba(0,0,0,.3)) set to -1 for no shadow shadowBlur - (default 5) the shadow blur if shadow is set index - (default 0) - set the index at start. Use -1 for no indicator at start. backgroundAlpha - (default 1 or .2 if indicatorType is Emoji) - affects only Emoji and custom DisplayObject indicatorType selectedIndex - same as index, kept in for backwards compatibility in ZIM DUO style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS hasProp(property as String) - returns true if property exists on object else returns false clone() - makes a copy with properties such as x, y, etc. also copied dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String index - gets or sets the current index of the indicator num - the assigned num value (how many light objects) (read only) backdrop - gives access to the backdrop if there is one Rectangle lights - an array of the light objects (zim Circle or Rectangle objects) lightsContainer - gives access to the lights createjs.Container with its Circle or Rectangle children enabled - set to false to disable component ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS dispatches a "change" event if press is true and indicator is pressed on and lights change ALSO see the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

TextInput(width, height, placeholder, text, size, font, color, backgroundColor, borderColor, borderWidth, maxLength, password, selectionColor, selectionAlpha, cursorColor, cursorSpeed, shadowColor, shadowBlur, align, corner, padding, paddingH, paddingV, shiftH, shiftV, scrollBarActive, scrollBarDrag, scrollBarColor, scrollBarAlpha, scrollBarFade, scrollBarH, scrollBarV, readOnly, inputType, rtl, uppercase, placeholderInstant, keyboardShift, style, group, inherit)

TextInput zim class - extends a zim.Window which extends a zim.Container which extends a createjs.Container DESCRIPTION Makes an input text field like an HTML form input type text field. This will be right on the canvas so can be layered with canvas objects as opposed to the ZIM TextArea() which is an HTML tag overlay. Thanks Cajoek for coding the text for the class. WARNING: currently a single line is available (so height is not at this point useful) See: https://zimjs.com/explore/textinput.html NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const input = new TextInput().loc(100,100); // adds a default input field to the stage

new Button({label:"SUBMIT"}).loc(100, 200).tap(()=>{
   zog(input.text); // whatever is typed into the LabelInput
});

CLOSE ▲

List(width, height, list, viewNum, vertical, currentSelected, align, valign, labelAlign, labelValign, labelIndent, labelIndentH, labelIndentV, indent, spacing, backgroundColor, rollBackgroundColor, downBackgroundColor, selectedBackgroundColor, selectedRollBackgroundColor, backdropColor, color, rollColor, downColor, selectedColor, selectedRollColor, borderColor, borderWidth, padding, corner, swipe, scrollBarActive, scrollBarDrag, scrollBarColor, scrollBarAlpha, scrollBarFade, scrollBarH, scrollBarV, scrollBarOverlay, slide, slideFactor, slideSnap, slideSnapDamp, shadowColor, shadowBlur, paddingH, paddingV, scrollWheel, damp, titleBar, titleBarColor, titleBarBackgroundColor, titleBarHeight, draggable, boundary, onTop, close, closeColor, collapse, collapseColor, collapsed, excludeCustomTap, organizer, checkBox, pulldown, clone, cancelCurrentDrag, index, noScale, pulldownToggle, optimize, keyEnabled, resizeHandle, resizeBoundary, resizeVisible, continuous, closeOthers, drop, dropTargets, dropColor, dropThickness, dropScrollSpeed, dropReticleAlpha, selectedIndex, style, group, inherit)

List zim class - extends a zim.Window which extends a zim.Container which extends a createjs.Container DESCRIPTION A vertical or horizontal list of items. This is really a zim.Tabs object inside a zim.Window object. The list can be strings, numbers or Label objects and these are added to Tabs buttons. The list can also include any DisplayObject with bounds (which most ZIM objects have except a Shape needs bounds set manually with setBounds()). If the object is not a string, number or Label then selection will not highlight and currently animateTo() may not work if size is different. See: https://zimjs.com/explore/list.html See: https://zimjs.com/explore/listObjects.html ACCORDION An accordion is a list with nested sections that expand open. A special accordion object can be passed to the list parameter that includes the menu items, styles for the sub menus and properties to animate, shade and indent the sub menus. See: https://zimjs.com/ten/accordion.html CONTINUOUS As of ZIM 015 a List can be made continuous So it will continually wrap. The scrollbars will be removed for this. See: https://zimjs.com/015/continuous.html PULLDOWN AND LIST COMPONENTS The pulldown parameter can be set to true to make list act like a pulldown This hides the backdrop and border and can be set to be collapsed or expanded There are component items available for slider, checkbox and colorPicker See: https://zimjs.com/ten/pulldown.html There is also a checkBox parameter to make a list of checkboxes This acts like a multiple select list See: https://zimjs.com/ten/listcheckbox.html SPACING, PADDING, INDENTING These adjust depending on vertical or horizontal settings The spacing is the distance between items (default 2) The padding is the distance around the items but not between (default spacing) So changing the spacing can seem to change the padding - but that can be overridden There is also paddingV and paddingH that can be adjusted (default padding) Indent only works with custom items in the list in left, right alignment or top, bottom valignment This moves the items away from their alignment There is also label indenting for items with labels - and labelIndentV and labelIndentH NOTE List can have a ZIM Organizer added with the organizer parameter The organizer lets the user add, remove and move items up, down, to the top or the bottom See: https://zimjs.org/spells.html?item=organizer See: https://zimjs.com/explore/organizer.html NOTE set the enable property to false as animating the position of the List object (or its parent Window) then set the enable property to true on the animate call function. See update() in Window docs for more NOTE to add ZIM Swipe() to objects in List set the overrideNoSwipe parameter of Swipe to true NOTE if animating the List off screen then either turn optimize:false or use list.update() in the "animation" event with the animate({events:true}) for a List in Pages use: pages.on("pagetransitioned", ()=>{ list.update(); }); NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const list = new List({
   list:["Enormous", "Big", "Medium", "Small", "Puny"],
   viewNum:3, // this number will change the size of the list elements (default is 5)
}).center()
S.update();

EXAMPLE

// drop items onto own list or other list
// drop is set to true in the STYLE - this means the list can drop its items onto itself
// dropTargets is set after the lists are made - to be able to drop onto other lists
// these two things are separate - items can be dropped onto other lists but not their own, etc.

const w = 60;
const h = 60;
STYLE = {
   Rectangle:{width:w, height:h, color:series(blue,green,orange,yellow,pink)},
   List:{vertical:false, spacing:null, viewNum:9, drop:true}
}
const items = [];
loop(40,()=>{items.push(new Rectangle())})
const list = new List(600, h*1.5, items).center().mov(0, -100);

const items2 = [];
loop(40,()=>{items2.push(new Rectangle())})
const list2 = new List(600, h*1.5, items2).center().mov(0,100);

list.dropTargets = list2;
list2.dropTargets = list;

EXAMPLE

// make a pulldown - this must start with a name for the list
// see https://zimjs.com/ten/pulldown.html for nested lists
const data = {
   "MONSTERS":["Ghost", "Ghoul", "Vampire", "Werewolf", "Skeleton"]
}
const list = new List({
   list:{menu:data, bloom:true, whither:true},
   pulldown:true,
   pulldownToggle:true // if want list to close when selected or stage is selected
}).center();
S.update();

EXAMPLE

// make a list with a width of 300 be resizeable
// from 100 width to 500 width
new List({
   width:500,
   align:LEFT,
   resizeHandle:true,
   resizeBoundary:new Boundary(0,0,-400,0)
}).resize(300).center()

EXAMPLE

const accordionData = {
   menu: {
      "Europe": ["London", "Paris", "Oslo"],
      "Canada": {
         "Ontario": {
            "Hamilton": {
               "Ancaster": [],
               "Dundas": [],
               "Westdale": []
            },
            "Toronto": [],
            "Ottawa": []
         },
         "British Columbia": ["Victoria", "Vancouver"],
         "Quebec": ["Montreal", "Quebec City"]
      },
      "United States": ["New York", "Atlanta", "San Francisco", "Portland"],
      "China": ["Bejing", "Hong Kong"],
      "Antarctica": []
   },
   shade: true,
   dim: true,
   shift: true,
   bloom: true,
   whither: true,
   subStyles: [
      {
         backgroundColor: red,
         color: white,
         rollBackgroundColor: purple,
         rollColor: white,
         selectedBackgroundColor: white,
         selectedColor: red,
         selectedRollBackgroundColor: purple,
         selectedRollColor: white
      }, {
         backgroundColor: blue,
         color: white,
         rollBackgroundColor: pink,
         rollColor: white,
         selectedBackgroundColor: black,
         selectedColor: white,
         selectedRollBackgroundColor: pink,
         selectedRollColor: white
      }, {
         backgroundColor: green,
         color: white,
         rollBackgroundColor: brown,
         rollColor: white,
         selectedBackgroundColor: black,
         selectedColor: white,
         selectedRollBackgroundColor: white,
         selectedRollColor: black
      }
   ]
};

const list = new List({
   list: accordionData,
   titleBar: "PLACES",
   titleBarBackgroundColor: orange,
   titleBarColor: white,
   titleBarHeight: 40,
   scrollBarActive: false,
   currentSelected: false,
   indent: 20,
   height: 650,
   viewNum: 13.5,
   boundary: new Boundary(0, 0, W - 200, H - 200),
   borderWidth: -1,
   shadowBlur: -1,
   backdropColor: F.color,
})
   .loc(100, 90)
   .tap(()=>{
      const currentID = list.accordionIndex;
      const currentText = list.value;
      const parentID = list.tree.getParent(currentID);
      let parentText;
      if (parentID) parentText = list.tree.getData(parentID).obj;
      zog(currentID, currentText, parentID, parentText);
   });

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) width - (default 300) width of list height - (default 200) height of list list - (default Options 1-30) an array of strings, numbers or zim Label objects - these will be added to zim Tabs Buttons or include any DisplayObject with bounds - these will not get highlighted but will indicate a change event and index currently objects with different sizes may not animateTo() properly - this will be fixed soon. A special Accordion object literal {} can be provided - see: https://zimjs.com/ten/accordion.html with the following properties: menu - a SIMPLE or COMPLEX hierarchy input - see ZIM Hierarchy() in the Code module note: if just providing the menu and the rest of the properties below are default then the Accordion object literal can be the SIMPLE or COMPLEX hierarchy input. In other words, no need to pass in {menu:{blah}} just pass in {blah} open - (default false) set to true to start the list opened shade - (default .2) the alpha of indented shade in sub menus - or false for no shading shift - (default 15) the pixels to indent the shade - and left or right aligned text of sub menus - or false for no indenting dim - (default .1) the alpha of dark background overlay on sub menus - or false for no dimming bloom - (default false) time in seconds for each submenu item to be added - or false to not animate sub menus in - if true default time is .1 second whither - (default false) time in seconds for each submenu item to be removed - or false to not animate sub menus out - if true default time is .1 second expander - (default "plus") set to "arrow" or "none" to change the expander icon - thanks Christopher Browne and Ofweird Top for the suggestions subStyles - (default null) an array of style objects for each sublevel - with all the color and background color properties See: https://zimjs.com/ten/accordion.html note: the Accordion List is currently incompatible with the Organizer, addTo() and removeFrom() viewNum - (default 5) how many items to show in the width and height provided adjusting this number will also change the overall scale of custom items for horizontal lists (this does not affect vertical lists due to the way vertical tabs are optimized) or see the noScale parameter to avoid scaling custom items in horizontal lists if no items are provided to start but rather added with addAt() then choose a viewNum that roughly matches how many items will fit in the view vertical - (default true) set to false to make a horizontal list currentSelected - (default false) set to true to show the current selection as highlighted align - (default CENTER) horizontal align set to START to align LEFT for ZIM DIR constant is "ltr" or RIGHT when DIR="rtl" - END is the opposite valign - (default CENTER) vertical align labelAlign - (default CENTER) horizontal align of the label only labelValign - (default CENTER) vertical align of the label only labelIndent - (default indent) indent of label when align or valign is set - usually same as indent unless custom objects are in list labelIndentH - (default indent) horizontal indent of label when align or valign is set labelIndentV - (default indent) vertical indent of label when align or valign is set indent - (default 10) indent of items when align or valign is set and there are custom objects in list spacing - (default 2) is the pixels between tab buttons backgroundColor - (default tin) the background color of the list elements (unless custom object) rollBackgroundColor - (default grey) the background color of the list element as rolled over selectedBackgroundColor - (default charcoal) the background color of the list element when selected backdropColor - (default dark) the background color of the list window (any CSS color) color - (default white) the text color of a deselected list element when not rolled over rollColor - (default color) the rollover color selectedColor - (default color) the text color of the selected list element selectedRollColor - (default color) the text color of the rolled over selected list element borderColor - (default silver) border color borderWidth - (default 1) the thickness of the border padding - (default 0) places the content in from edges of border (see paddingH and paddingV) corner - (default 0) is the rounded corner of the list (does not accept corner array - scrollBars are too complicated) swipe - (default auto/true) the direction for swiping set to none / false for no swiping also can set swipe to just vertical or horizontal scrollBarActive - (default true) shows scrollBar (set to false to not) scrollBarDrag - (default true) set to false to not be able to drag the scrollBar scrollBarColor - (default borderColor) the color of the scrollBar scrollBarAlpha - (default .3) the transparency of the scrollBar scrollBarFade - (default true) fades scrollBar unless being used scrollBarH - (default true) if scrolling in horizontal is needed then show scrollBar scrollBarV - (default true) if scrolling in vertical is needed then show scrollBar scrollBarOverlay - (default true) set to false to not overlay the scrollBar on the content overlaying could hide content - but without overlay, content less than window size will show gap when no scrollBar slide - (default true) Boolean to throw the content when drag/swipe released slideFactor - (default .95) is the factor multiplied by dragging velocity (1 no slowing, .7 fast slowing) slideSnap - (default true) slides past boundary and then snaps back to boundary when released - also VERTICAL, HORIZONTAL, and false slideSnapDamp - (default .1) the damping to snap back to boundary shadowColor - (default rgba(0,0,0,.3)) the color of the shadow shadowBlur - (default 20) set shadowBlur to -1 for no drop shadow paddingH - (default padding) places content in from left and right paddingV - (default padding) places content in from top and bottom scrollWheel - (default true) scroll vertically with scrollWheel damp - (default null) set to .1 for instance to damp the scrolling titleBar - (default null - no titleBar) a String or ZIM Label title for the list that will be presented on a titleBar across the top titleBarColor - (default black) the text color of the titleBar if a titleBar is requested titleBarBackgroundColor - (default "rgba(0,0,0,.2)") the background color of the titleBar if a titleBar is requested titleBarHeight - (default fit label) the height of the titleBar if a titleBar is requested draggable - (default true if titleBar) set to false to not allow dragging titleBar to drag list boundary - (default null) set to ZIM Boundary() object - or CreateJS.rectangle() onTop - (default true) set to false to not bring list to top of container when dragging close - (default false) - a close X for the top right corner that closes the list when pressed closeColor - (default grey) - the color of the close X if close is requested collapse - (default false) - set to true to add a collapse button to the titleBar that reduces the list so only the bar shows and adds a button to expand collapseColor - (default grey) - the color of the collapse icon collapsed - (default false) set to true to start the list collapsed excludeCustomTap - (default false) set to true to exclude custom buttons from tap() which would override existing tap() on the custom buttons organizer - (default null) the ZIM Organizer for the list checkBox - (default false) set to true to turn labeled list into a list of ZIM CheckBox objects - thanks Dale789 for the prompting! See: https://zimjs.com/ten/listcheckbox.html use selected.checkBox to get access to the selected CheckBox use the checkBoxes property to get a list of the CheckBox objects use setCheck(index, type), setChecks(type), getCheck(index) methods to manipulate use STYLE to set CheckBox size pulldown - (default false) set to true to have List act like a Pulldown use tapClose and offClose parameters to optionally adjust behaviour See: https://zimjs.com/ten/pulldown.html clone - (default false) set to true to add clones of the list items rather than the items themselves cancelCurrentDrag - (default false) - set to true to cancel window dragging when document window loses focus this functionality seems to work except if ZIM is being used with Animate - so we have left it turned off by default index - (default 0) - set the index at start - set to -1 for no selection noScale - (default false) - set to true to not scale custom items - this ignores viewNum pulldownToggle - (default false) - set to true to collapse list in pulldown mode when final item is selected or pressing off list optimize - (default true) set to false to not turn DisplayObjects that are not on the stage visible false as the Window is scrolled, any objects within the content and any objects within one level of those objects are set to visible false if their bounds are not hitting the stage bounds resizeHandle - (default false) - set to true to rollover bottom right corner to resize list with resizeHandle currently, the List content does not automatically expand so create the list with a width as wide as it will go then call the resize() method to start the list at the desired width resizeBoundary - (default null) add a ZIM Boundary() object for the resize handle - relative to the resize handle start position new Boundary(-100, 0, 200, 0) - would allow the resize handle to move to the left or right 100 pixels but not up or down new Boundary(0, -100, 0, 200) - would allow the resize handle to move to up or down 100 pixels but not left or right new Boundary(0,0,100,100) - would allow the list to expand in x or y 100 pixels but not grow smaller new Boundary(-100,-100,100,100) - would allow the list to shrink in x or y 100 pixels but not grow bigger resizeVisible - (default false) set to true to always see the resizeHandle - if resizeHandle is set to true continuous - (default false) set to true to make the list scroll continuously - should have more elements than the viewNum for this closeOthers - (default false) set to true to close any open branches before expanding selected branch drop - (default false) - set to true to allow drag and drop of items onto the current list if the list is vertical, dragging the item horizontally will pull it from the list the item can then be dragged to a different location and dropped in place for a horizontal list, dragging the item vertical will pull it from the list also see the dropTargets parameter and the drop and dropTarget properties note: the dropTargets alone can be set to drop onto other lists but not the current list also see updateDrop() method if a list has been moved or scaled dropTargets - (default null) - add a list or an array of lists to drop an item from the current list see the drop parameter and the drop and dropTargets properties note: dropTargets can be set without setting the drop parameter to true and then items can be dragged to the target lists but not onto the current list also see updateDrop() method if a list has been moved or scaled dropColor - (default white) - the color of the diamond reticle that indicates where an item will be dropped dropThickness - (default 1) - the thickness of the diamond reticle that indicates where an item will be dropped dropScrollSpeed - (default 5) - the speed the list is scrolled as a drop item is dragged up to 50px off an end of the list this is only applied if the list scrolls on that end the speed is multiplied by 1.5 when the item is between 50px and 80px off the end dropReticleAlpha - (default 1) - set the alpha of the drop reticle diamond - set to 0 to not show reticle selectedIndex - same as index, kept in for backwards compatibility in ZIM DUO style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS animateTo(index, timePerItem) - animate list to index at given time per item (default 50ms) - returns object for chaining addAt(items, index, style, clone) - an array of items to insert at an index in the list - returns object for chaining if the list is made with no items to start and items are added with addAt() then set the List() viewNum parameter value to match roughly how many items will fit in view clone defaults to false - set to true to add a clone of the item or items to the list note: does not support continuous at this time (whereas removeAt() does support continuous) removeAt(number, index) - remove a number of elements (default 1) from the list starting at and including the index - returns object for chaining note: does support continuous (whereas addAt() does not support continuous) clear() - clears the list first() - select first list element - returns object to chain last() - select last list element - returns object to chain toggle(state, index) - for an accordion, will close the accordion if open or open if closed passing in true will open (or keep opened), passing in false will close (or keep closed) pass in an index to open an accordion to that index (indexes always start at 0) the way the index works is that it is based on visible items pass in an array to the index parameter to open inner accordions remember, the index is based on all visible items and does not restart at 0 for nested items there is a 50ms delay after each index is chosen as the accordion opens up example: 4 items showing and index 1 (second item) has 5 things, the second of which has 3 things. toggle(true, [1, 3, 4]) would open outer index 1 showing five more the 3 index is now the 1 index of the five so 3 would open the 1 index of those 5 showing 3 more the 4 index is now the 0 index of those three so 4 would open the 0 index of those three also see toggled property (which only works on the root) and openAtNum() note - in pulldown mode cannot call toggle() from change or tap methods - see pulldownToggle parameter instead setCheck(index, type) - set the CheckBox at an index to true or false (the type parameter) setChecks(type) - set all CheckBoxes to true or false (the type parameter) returns object for chaining getCheck(index) - get the checked value of the CheckBox at an index cancelCurrentDrag() - stop current drag on list - but add dragging back again for next drag collapse(state) - state defaults to true to collapse or set to false to expand collapsed list must start with the collapse parameter set to true also see collapsed property openAtLevel(level) - open a level of an accordion list level 0 shows first level, 1 shows second level, etc. openAtNum(idNum, closeOthers) - open an accordion list at a specific id number view the tree property in the console (F12) and expand the data property to see ids and then expand any ids to see more ids nested inside the idNum should be something like 6 or 12 without the word id. closeOthers defaults to false - set to true to close any open branches before opening at idNum updateDrop() - updates global locations of list if being used as a drop location and list has been moved or scaled hasProp(property as String) - returns true if property exists on object else returns false clone() - makes a copy with properties such as x, y, etc. also copied dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection COMPONENT LIST ITEMS These static methods make special List items with components See: https://zimjs.com/ten/pulldown.html Each may have a label, min, max, starting val, steps, etc. Each has a call parameter for the function to call when the component changes There are alternatively obj and property parameters Setting these will change the property of the obj to the value of the component Each will be given a call property of the call function This can be changed dynamically if desired. List.slider(label, min, max, val, call, step, decimals, obj, property, paddingLeft, paddingRight, factor, offset, backgroundColor) A static method (use it like List.slider("fps", 0, 60, 20, doFps)) to make a slider List item decimals defaults to 0 so if using decimals set to 1, 2, 3, etc. to adjust the decimals on the stepper (at right) factor will multiply the slider value only in the stepper offset will start the stepper offset by that amount this lets the stepper value be factored and offset from the actual slider value List.checkBox(label, checked, call, obj, property, paddingLeft, paddingRight, backgroundColor) A static method (use it like List.checkBox("visible", checked, doVisible)) to make a checkBox List item List.colorPicker(label, color, picker, call, obj, property, paddingLeft, paddingRight, backgroundColor) A static method (use it like List.colorPicker("color", red, docColor)) to make a colorPicker List item picker is an optional custom ZIM ColorPicker This static method is used internally by the checkBox parameter of List It can be used to create a checkBox list element - but also see List.checkBox() above which is a little different and matches the format of the other List Items List.checkItem(text, width, paddingH, paddingV, color, rollColor, backgroundColor, rollBackgroundColor, selectedColor, selectedRollColor, selectedBackgroundColor, selectedRollBackgroundColor) A static method (use it like List.checkItem("hello", 30, 300, 10, 10, white, etc.)) To add a checkItem to a plain list use: new List({list:["goodbye", List.checkItem("hello", 30, 300, 10, 10, white), "what?"]}) ALSO All Window methods such as resize() ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String index - get or set the index of the selected list element indexPlusPosition set the index and scroll the index into view - might be broken for lists with custom objects of different heights accordionIndex - read only index of the selected item inside an accordion otherwise is undefined selected - gets the current selected list object (ie. a Button) use selected.checkBox to access the selected CheckBox if checkBox parameter is true if custom objects are in the list then use selected.content to access the custom object\ value - gets or sets the current value - in setting, it matches the first label that has the value anywhere in it currentValue - same as value - kept in for backwards compatibility text - gets or sets the current selected label text label - gets current selected label object items (or list) - read-only array of list button objects or objects in the list this will change from the list entered as parameters as strings are turned into tab buttons, etc. use addAt() and removeAt() methods to manipulate custom items can be accessed using item.content - as the item is a container with a backing then content each item has the following properties: index, label, expander (Label for accordion +- or arrows), listZID (see Hierarchy) and other properties depending on the item checkBoxes - read-only array of CheckBox objects if checkBox parameter is true itemsText - read-only array of text for labels (or null element if no label) itemWidth - the width of each item (unless custom items) itemHeight - the height of each item (unless custom items) spacing - get the spacing length - read-only length of the list tabs - a reference to the tabs object used in the list organizer - a reference to the organizer object if used originalList - if an accordion object is provided this is the reference to that object tree - if an accordion object is provided this is the active tree data this will also give ids that can be used with the openAtNum(idNum) method vertical - read-only true if list is vertical or false if horizontal toggled - for accordion get or set whether the main (root) accordion is open (true) or closed (false) also see toggle() chainable method for more options note - in pulldown mode cannot call toggled from change or tap methods - see pulldownToggle parameter instead collapseIcon - access to the ZIM Shape if there is a collapse triangle collapsed - get or set whether the list is collapsed - must start with collapse parameter set to true also see collapse() method drop - get or set to allow drag and drop of items onto the current lists - see drop parameter dropTargets - get or set a list or an array of lists to drop an item from the current list - see dropTargets parameter dropColor - get or set the color of the diamond reticle that indicates where an item will be dropped - see dropColor dropReticle - each list that can be dropped on gets a dropReticle property that is the ZIM rectangle so individual reticles can be adjusted - say different colors for different lists dropItem - after a dropdown event, the dropItem is the ghost being dragged dropIndex - after a dropdown event, the dropIndex is the original index of the item being dragged dropList - after a dropup event, the dropList is the list that the item was dropped into (could be original list) dropNewIndex - after a dropup event, the dropNewIndex is the index in the list the item has been dropped enabled - default is true - set to false to disable ALSO see all Window properties - like titleBar, titleBarLabel, resizeHandle, etc. ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS dispatches a "change" event - then use index or text to find data dispatches a "bloom" event for each item that is created when blooming this receives an event object with an item property for the list item that was just opened dispatches an "expanded" event when items have been expanded this receives an event object with an items property of the items just opened dispatches a "collapsed" event when items have been collapsed dispatches a "dropdown" event when drop item is pulled from list list will have dropItem and dropIndex properties dispatches a "dropup" event when drop item is dropped list will have dropItem, dropList and dropNewIndex properties ALSO All Window events including "scrolling" ALSO see the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

Stepper(list, width, backgroundColor, borderColor, borderWidth, label, color, vertical, arrows, corner, shadowColor, shadowBlur, continuous, display, press, hold, holdDelay, holdSpeed, draggable, dragSensitivity, dragRange, stepperType, min, max, step, step2, arrows2, arrows2Scale, keyEnabled, keyArrows, rightForward, downForward, index, value, arrowColor, arrowScale, selectedIndex, currentValue, style, group, inherit)

Stepper zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION Lets you step through a list of numbers or strings with arrows and keyboard arrows. Uses mousedown to activate and defaults to stepping while pressing down and going faster if you drag away from your press. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const stepper = new Stepper().center().change(()=>{
   zog(stepper.index);
   zog(stepper.value);
});

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) list - (default 0-10) pass in an array of strings or numbers to display one at a time passing in an array will change the stepperType parameter from "number" to "list" for instance a set of words ["hello", "goodbye", "wow", "omg!"] would need a stepperType of "list" to be set and a larger width width - (default 100) is the width of the text box (you can scale the whole stepper if needed) backgroundColor - (default white) for the arrows and the text box borderColor - (default null) stroke color for the box borderWidth - (default 1 if borderColor) stroke thickness for the box label - (default null) which can be used to define custom text properties vertical - (default false) set to true if you want the arrows above and below the text arrows - (default true) - use graphical arrows (also see keyArrows to turn off keyboard arrows) corner - (default 10) is the radius of the text box corners - set to 0 for square corners can also be an array of [topLeft, topRight, bottomRight, bottomLeft] shadowColor - (default rgba(0,0,0,.3)) set to -1 for no drop shadow shadowBlur - (default 14) value for shadow blur if shadow is set continuous - (default false) set to true to loop around or go back past 0 index display - (default true) set to false just to just show the arrows and not the value press - (default true) will advance on label mousedown - set to false to not advance on mousedown hold - (default true) set to false to not step with extended press down holdDelay - (default .4) time (seconds) to wait for first step with hold (also see ZIM TIME constant) holdSpeed - (default .2) time (seconds) between steps as holding (also see ZIM TIME constant) draggable - (default true) set to false to not step when dragging dragSensitivity - (default .1) .01 changes really quickly - 1 changes at base rate dragRange - (default 200) absolute distance (pixels) from press the drag will reach maximum stepperType - (default "number" unless passing in an array to list) makes numbers, words, letters to step through also stepperType "list", "letter" - these get ranges below min - (default 0 for number and "A" for letter) the minimum value (can make min bigger than max) (not for list stepperType) max - (default 10 for number and "Z" for letter) the maximum value (can make max smaller than min) (not for list stepperType) step - (default 1) the step value each time - can be decimal (only positive, only for number stepperType) step2 - (default set to step) the step value when dragging perpendicular to main horizontal or vertical direction step2 will run with draggable set to true or with arrows2 set below (only positive, only for number stepperType) arrows2 - (default true if step2 different than step and stepperType number - else false) secondary arrows perpendicular to main horizontal or vertical direction arrows2 will activate step2 above (only for number stepperType) arrows2Scale - (default .5) the scale relative to the main arrows keyEnabled - (default true) set to false to disable keyboard search / number picker keyArrows - (default true) set to false to disable keyboard arrows rightForward - (default true) set to false to make left the forward direction in your list downForward - (default true except if stepperType is "number" then default false) set to false to make up the forward direction in your list index - (default 0) set the index at start value - (default null) set the value at start arrowColor - (default backgroundColor) set the arrow color arrowScale - (default 1) set the arrow scale selectedIndex - same as index, kept in for backwards compatibility in ZIM DUO currentValue - same as value - kept in for backwards compatibility style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS next() - goes to next prev() - goes to previous hasProp(property as String) - returns true if property exists on object else returns false clone() - makes a copy with properties such as x, y, etc. also copied dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String index - gets or sets the current index of the array and display value - gets or sets the current value of the array and display currentValue - same as value - kept in for backwards compatibility valueEvent - gets or sets the current value and dispatches a "change" event if set and changed stepperArray - gets or sets the list containerPrev, containerNext - access to the zim Container that holds the arrows arrowPrev, arrowNext - access to the zim Triangle objects arrowPrev2, arrowNext2 - access to the zim Triangle objects for arrows2 min, max - only for number mode at the moment - currently, do not change the max to be less than the min label - access to the Label textBox - access to the text box backing shape continuous - does the stepper loop enabled - default is true - set to false to disable blendMode - how the object blends with what is underneath - such as "difference", "multiply", etc. same as CreateJS compositeOperation keyFocus - get or set the keyboard focus on the component - see also zim.KEYFOCUS will be set to true if this component is the first made or component is the last to be used ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. OPTIMIZED This component is affected by the general OPTIMIZE setting (default is false) if set to true, you will have to S.update() after setting certain properties and S.update() in change event to see component change its graphics EVENTS dispatches a "change" event when changed by pressing an arrow or a keyboard arrow (but not when setting index or value properties) ALSO see the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

Slider(min, max, step, button, barLength, barWidth, barColor, vertical, useTicks, tickColor, tickStep, semiTicks, tickScale, semiTickScale, accentSize, accentOffset, accentColor, accentBackgroundColor, accentDifference, sound, inside, keyArrows, keyArrowsStep, keyArrowsH, keyArrowsV, damp, value, expand, expandVertical, expandBar, expandBarVertical, useLabels, labelMargin, labelColor, range, rangeColor, rangeWidth, rangeMin, rangeMax, rangeAve, addZero, currentValue, style, group, inherit)

Slider zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION A traditional slider - will give values back based on min and max and position of button (knob). NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const slider = new Slider({step:1})
   .center()
   .change(() => {
      zog(slider.value); // 0-10 in steps of 1
   });
// or create an on("change", function) event (do not chain on)

VIDS

CLOSE ▲

Selector(tile, borderColor, borderWidth, backgroundColor, corner, dashed, paddingH, paddingV, speed, diagonal, dim, multi, keyArrows, behind, resizeScale, index, liveIndex, selectedIndex, style, group, inherit);

Selector zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION A Selector acts on a ZIM Tile to provide an interactive selector that highlights a tile element. The selector works as a select bar and a select pad. See: https://zimjs.com/ten/wrapper.html which includes several Selector objects as bars Selector as a pad would be similar to selecting letters on an onscreen TV remote system Selector has a multi parameter that allows for multiple elements to be in selected mode. The index or selectedItem will only be the last selected. And only one selecteIndex can be set at a time but as many as desired can be set one after another - in a loop for instance. The difference is that once selected, the item remains highlighted until unselected with a presseup. This allows for a synth pad for instance where multiple notes can be played at the same time. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// the items in the Tile should be centerReg()
new Selector(new Tile(new Rectangle().centerReg(), 4, 4, 20, 20))
   .center()
   .change(e=>{
      e.target.currentItem.alpha = 0;
      S.update();
   });
S.update();

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) tile - (default four red circles) the ZIM Tile to which to apply the selector the elements should have their registration centered see Tile for how to tile a series of different objects, etc. this will work as a horizontal or vertical bar or a grid selector borderColor - (default white) the border color of the selector borderWidth - (default 2) the border width of the selector backgroundColor - (default "rgba(0,0,0,.1)") the background color of the selector corner - (default 10) the corner radius of the selector dashed - (default false) the dashed border setting of the selector paddingH - (default half tile spacingH) the space from the selected item paddingV - (default half tile spacingV) the background color of the selector speed - (default 2) the speed the selector moves to the next selection - can set to 0 for instant diagonal - (default false) defaults to animate horizontally and vertically - set to true for diagonally dim - (default null) set to true for .7 alpha or a number between 0-1 for tile to dim while selector animates multi - (default false) set to true to enable multiple highlights index and selectedItem will still read only the last selected tile or set only one tile at a time will need a multitouch devices - degrades fine to single touch if no multitouch keyArrows - (default true) set to false to disable keyboard arrows behind - (default false) set to true to put selector behind tile resizeScale - (default false) set to true to resize the border as selector changes scale index - (default 0) the item index on which to start the selector - set to -1 for no selection liveIndex - (default false) set to true to update the index and dispatch a change event as selector animates across items selectedIndex - same as index, kept in for backwards compatibility in ZIM DUO style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS hasProp(property as String) - returns true if property exists on object else returns false clone() - makes a copy with properties such as x, y, etc. also copied dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String index - the index number of the selected item in the tile - set to -1 for no selection liveIndex - gets or sets whether to update the index and dispatch a change event as selector animates across items currentItem - gets or sets the current item under the selector noAnimate - set to make the next index or currentItem call not animate to tile MULTI - in a change event with multi set: downIndex - this will be the index under the selector on press down (or null if pressing up) upIndex - this will be the index under the selector on press up (or null if pressing down) downItem - this will be the item under the selector on press down (or null if pressing up) upItem - this will be the item under the selector on press up (or null if pressing down) lastIndex - get the last selected index lastItem - get the last selected item selectedCol - get the index of the selected column selectedRow - get the index of the selected row lastCol - get the index of the last selected column lastRow - get the index of the last selected row tile - a reference to the Tile object selector - a reference to the Rectangle object used as the selector enabled - default is true - set to false to disable blendMode - how the object blends with what is underneath - such as "difference", "multiply", etc. same as CreateJS compositeOperation keyFocus - get or set the keyboard focus on the component - see also zim.KEYFOCUS will be set to true if this component is the first made or component is the last to be used ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS dispatches a "change" event when selector finishes animating to a new selection or for each index if liveIndex is true dispatches a "changeset" event if index or currentItem is set programatically (not user selected) note that a tap() or mousedown/click function can be used if the index is desired right away ALSO see the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Dial(min, max, step, width, backgroundColor, indicatorColor, indicatorScale, indicatorType, useTicks, innerTicks, tickColor, tickStep, semiTicks, tickScale, semiTickScale, innerCircle, innerScale, innerColor, inner2Color, accentSize, accentOffset, accentColor, accentBackgroundColor, accentDifference, sound, linear, gap, limit, keyArrows, keyArrowsStep, keyArrowsH, keyArrowsV, continuous, continuousMin, continuousMax, damp, value, useLabels, labelMargin, addZero, currentValue, style, group, inherit);

Dial zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION A traditional dial - will give values back based on min and max and position of dial. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

var dial = new Dial({step:1, backgroundColor:"violet"})
   .center()
   .change(()=>{
      zog(dial.value); // 1-10 in steps of 1
   });
S.update();

VIDS

CLOSE ▲

Tabs(width, height, tabs, backgroundColor, rollBackgroundColor, downBackgroundColor, selectedBackgroundColor, selectedRollBackgroundColor, color, rollColor, downColor, selectedColor, selectedRollColor, vertical, spacing, currentEnabled, currentSelected, corner, base, keyEnabled, gradient, gloss, backing, rollBacking, wait, waitTime, waitBackgroundColor, rollWaitBackgroundColor, waitColor, rollWaitColor, waitModal, waitEnabled, backdropColor, align, valign, labelAlign, labelValign, labelIndent, labelIndentH, labelIndentV, indent, useTap, excludeCustomTap, index, styleLabels, keyWrap, selectedIndex, style, group, inherit)

Tabs zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION A traditional tab layout for along the edge of content. Can also act as an independent button row or column. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

var tabs = new Tabs({tabs:["A", "B", "C", "D"], spacing:5, corner:14})
   .center()
   .change(()=>{
      zog(tabs.index);
      zog(tabs.text);
   });
S.update();

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) width - (default 240) overall width of tab set (ZIM divides the width across tabs and spacing) height - (default 60) height of tabs tabs - (default ["1","2","3","4"]) an array of any String, Number, Label, Button, (or any DisplayObject) OR tab objects with the following properties available: any tab specific properties will override the default values from other parameters [{label:"String", width:200, backgroundColor:red, rollBackgroundColor:pink, downBackgroundColor:purple, selectedBackgroundColor:grey, color:yellow, selectedColor:"lime", downColor:white}, {etc.}] label can be a String or a Label object - default text color is white Tab objects can also include wait properties for individual buttons. (this was put in place before Buttons were allowed in the tabs array - so you can just add a Button to the tab array instead) See wait, waitTime, waitBackgroundColor, rollWaitBackgroundColor, waitColor, rollWaitColor, waitModal and waitEnabled parameters below wait can be used with button's waiting property to offer an alternative to a loading screen or confirmation panel also see the button's clearWait() method to cancel the wait state and waited event that triggers when the wait is done wait will primarily be applicable when the tabs are used as a set of buttons rather than traditional tabbing Warning - do not use the same array for multiple tabs as the array is turned into an array of objects used by the Tabs object. backgroundColor - (default tin) the background color of a deselected tab when not rolled over rollBackgroundColor - (default grey) the rollover background color downBackgroundColor - (default null) the pressing down background color selectedBackgroundColor - (default dark) the background color of the selected tab (any CSS color) selectedRollBackgroundColor - (default rollBackgroundColor) the background color of the selected tab on rollover (if currentEnabled is true) color - (default white) the text color of a deselected tab when not rolled over rollColor - (default color) the rollover color (selected tabs do not roll over) downColor - (default null) the pressing down color selectedColor - (default color) the text color of the selected tab (any CSS color) selectedRollColor - (default rollColor) the text color of the selected tab on rollover (if currentEnabled is true) vertical - (default false) set to true to make vertical tabs with text still horizontal spacing - (default 1) is the pixels between tab buttons currentEnabled - (default false) set to true to be able to press (a second time) the selected tab button currentSelected - (default true) set to false to not highlight the current button (good for button bars) setting this to true will set currentEnabled to true corner - (default 0) the corner radius of the tabs can also be an array of [topLeft, topRight, bottomRight, bottomLeft] base - (default "none") specifiy a side for flat bottom when corner is set (but not set to an array) other values are "bottom" (default when corner and not vertical), LEFT (default when corner and vertical), TOP, RIGHT ** this was flatBottom - but then vertical tabs were added so it was changed in ZIM 9.2.0 keyEnabled - (default true) so tab key cycles through tabs, shift tab backwards gradient - (default null) 0 to 1 (try .3) adds a gradient to the tabs gloss - (default null) 0 to 1 (try .1) adds a gloss to the tabs wait - (default null) String text for tab to say when pressed to enter a wait mode The wait parameters can be (and probably will be) set as properties for each individual tab in the tabs array waitTime - (default 20000) milliseconds to stay in wait state before returning to normal tab waitBackgroundColor - (default color) the color of the tab during wait period rollWaitBackgroundColor - (default color) the color of the tab during wait period waitBackgroundColor - (default red) color to make button during wait time if wait is set rollWaitBackgroundColor - (default rollColor) color for button when waiting and rolled over waitColor - (default label's color) color to make text during wait time if wait is set rollWaitColor - (default label's roll color) color for text when waiting and rolled over waitModal - (default false) set to true to exit wait state if user clicks off tabs or to another tab waitEnabled - (default true) set to false to disable tabs while in wait mode backdropColor - (default null) set to a color to show behind the tabs (handy for when corner is not 0) align - (default CENTER) horizontal align valign - (default CENTER) vertical align labelAlign - (default CENTER) horizontal align of the label only labelValign - (default CENTER) vertical align of the label only labelIndent - (default indent) indent of label when align or valign is set - usually same as indent unless custom objects are in tabs labelIndentH - (default indent) horizontal indent of label when align or valign is set labelIndentV - (default indent) vertical indent of label when align or valign is set indent - (default 10) indent of items when align or valign is set and there are custom objects in tabs useTap - (default false) set to true to use tap to activate otherwise uses ACTIONEVENT (mousedown or click) excludeCustomTap - (default false) set to true to exclude custom buttons from tap() which would override existing tap() on the buttons index - (default 0) - set the index at start for no selected tab to start set this to -1 styleLabels - (default false) - set to true to pass styles to Tab labels keyWrap - (default true) - set to false to not wrap around Tabs when tab key reaches end or start selectedIndex - same as index, kept in for backwards compatibility in ZIM DUO style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS addAt(items, index, setStyle) - an array of items to insert at an index in the tab - tabs will grow in size - returns the object for chaining To keep the same size - run insertAt() and then remake the Tabs using the tabs.buttons array as the tabs parameter Can also send in a setStyle object literal {} with color, rollColor, selectedColor and selectedRollColor plus the background color versions of these! removeAt(number, index) - remove number of items starting at a an index (default 1, length-1) - tabs will shrink in size - returns the object for chaining first() - select first tab - returns object to chain last() - select last tab - returns object to chain getItemIndex(item) - gets the index of the list item provided hasProp(property as String) - returns true if property exists on object else returns false clone() - makes a copy with properties such as x, y, etc. also copied dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String index - gets or sets the selected index of the tabs selected - gets the selected button - selected.enabled = true, etc. tabs - gets or sets tabs object (will have to manually change buttons as well as adjust props) backgroundColor - gets or sets default unselected background color - not applied to custom buttons rollBackgroundColor - gets or sets default rolled over background color - not applied to custom buttons selectedBackgroundColor - gets or sets default selected background color - not applied to custom buttons selectedRollBackgroundColor - gets or sets default selected roll background color - not applied to custom buttons color - gets or sets default unselected text color - not applied to custom buttons rollColor - gets or sets default rolled over text color - not applied to custom buttons selectedColor - gets or sets default selected text color - not applied to custom buttons selectedRollColor - gets or sets default selected roll text color - not applied to custom buttons text - gets current selected label text label - gets current selected label object buttons - an array of the ZIM Button objects. buttons[0].enabled = false; labels - an array of the ZIM Label objects. labels[0].text = "YUM"; labels[2].y -= 10; buttonDown - the button that is currently being pressed backdrop - reference to backdrop Rectangle if backdropColor is provided keyEnabled - gets or sets whether the tab key and shift tab key cycles through tabs (does not affect accessibility) enabled - default is true - set to false to disable blendMode - how the object blends with what is underneath - such as "difference", "multiply", etc. same as CreateJS compositeOperation keyFocus - get or set the keyboard focus on the component - see also zim.KEYFOCUS will be set to true if this component is the first made or component is the last to be used ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. OPTIMIZED This component is affected by the general OPTIMIZE setting (default is false) if set to true, you will have to S.update() after setting certain properties and S.update() in change event to see component change its graphics ACTIONEVENT This component is affected by the general ACTIONEVENT setting The default is "mousedown" - if set to something else the component will act on click (press) EVENTS dispatches a "change" event when a tab changes (but not when setting index property) ALSO see the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

Pad(width, cols, rows, keys, backgroundColor, rollBackgroundColor, downBackgroundColor, selectedBackgroundColor, selectedRollBackgroundColor, color, rollColor, downColor, selectedColor, selectedRollColor, spacing, currentEnabled, currentSelected, corner, labelColor, gradient, gloss, backing, rollBacking, wait, waitTime, waitBackgroundColor, rollWaitBackgroundColor, waitColor, rollWaitColor, waitModal, waitEnabled, index, selectedIndex, style, group, inherit)

Pad zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION A pad that has rows and cols made of square keys. When the keys are pressed the pad will dispatch a change event - get the index or text property. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

var pad = new Pad()
   .center()
   .change(()=>{
      zog(pad.index); // 0-8
      zog(pad.text); // 1-9
   });
S.update();

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) ** inherits STYLE from type selector for Pad, then general styles then type selector for Tabs width - (default 150) overall width of pad (ZIM divides the width across cols and spacing) cols - (default 3) the columns in the pad rows - (default cols) the rows in the pad keys - (default an Array for cols x rows) an array of key objects with the following properties available: any key specific properties will override the default values from other parameters [{label:"String", width:200, backgroundColor:red, rollBackgroundColor:pink, selectedBackgroundColor:grey}, {etc.}] the label can be a String or a Label object - default text color is white Key objects can also include wait properties for individual buttons. See wait, waitTime, waitBackgroundColor, rollWaitBackgroundColor, waitColor, rollWaitColor, waitModal and waitEnabled parameters below wait can be used with button's waiting property to offer an alternative to a loading screen or confirmation panel also see the button's clearWait() method to cancel the wait state and waited event that triggers when the wait is done backgroundColor - (default tin) the background color of a deselected key when not rolled over rollBackgroundColor - (default grey) the rollover background color (selected keys do not roll over) downBackgroundColor - (default null) the pressing down background color selectedBackgroundColor - (default dark) the background color of the selected key (any CSS color) color - (default white) the text color of a deselected key when not rolled over rollColor - (default color) the rollover color (selected keys do not roll over) downColor - (default null) the pressing down color selectedColor - (default color) the text color of the selected key (any CSS color) spacing - (default 1) is the pixels between key buttons currentEnabled - (default true) set to false to make selected key not pressable currentSelected - (default true) set to false to make the current selected key not the selected colors corner - (default 0) the corner radius of the keys can also be an array of [topLeft, topRight, bottomRight, bottomLeft] labelColor - (default white) the color of the label gradient - (default null) 0 to 1 (try .3) adds a gradient to the tabs gloss - (default null) 0 to 1 (try .1) adds a gloss to the tabs wait - (default null) String text for button to say when pressed to enter a wait mode The wait parameters can be (and probably will be) set as properties for each individual button in the pads array waitTime - (default 20000) milliseconds to stay in wait state before returning to normal button waitBackgroundColor - (default color) the color of the button during wait period rollWaitBackgroundColor - (default color) the color of the button during wait period waitBackgroundColor - (default red) color to make button during wait time if wait is set rollWaitBackgroundColor - (default rollColor) color for button when waiting and rolled over waitColor - (default label's color) color to make text during wait time if wait is set rollWaitColor - (default label's roll color) color for text when waiting and rolled over waitModal - (default false) set to true to exit wait state if user clicks off the pad or to another button waitEnabled - (default true) set to false to disable pad while in wait mode index - (default 0) - set the index at start selectedIndex - same as index, kept in for backwards compatibility in ZIM DUO style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS hasProp(property as String) - returns true if property exists on object else returns false clone() - makes a copy with properties such as x, y, etc. also copied dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String index - gets or sets the selected index of the pad text - gets current selected label text selected - gets the selected button - selected.enabled = true, etc. label - gets current selected label object selectedBackgroundColor - gets or sets default selected background color backgroundColor - gets or sets default unselected background color rollBackgroundColor - gets or sets default rolled over background color color - gets or sets default unselected text color rollColor - gets or sets default rolled over text color selectedColor - gets or sets default selected text color buttons - an array of the ZIM Button objects. buttons[0].enabled = false; labels - an array of the ZIM Label objects. labels[0].text = "YUM"; labels[2].y -= 10; tabs - an array of the zim Tabs objects (one object per row) enabled - default is true - set to false to disable blendMode - how the object blends with what is underneath - such as "difference", "multiply", etc. same as CreateJS compositeOperation ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. OPTIMIZED This component is affected by the general OPTIMIZE setting (default is false) if set to true, you will have to S.update() after setting certain properties and S.update() in change event to see component change its graphics ACTIONEVENT This component is affected by the general ACTIONEVENT setting The default is "mousedown" - if set to something else the component will act on click (press) EVENTS dispatches a "change" event when a pad changes (but not when setting index property) ALSO see the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

NumPad(advanced, titleBar, titleBarColor, titleBarBackgroundColor, titleBarHeight, backgroundColor, borderColor, borderWidth, corner, numberCorner, close, closeColor, collapse, collapseColor, collapsed, align, shadowColor, shadowBlur, draggable, boundary, style, group, inherit)

NumPad zim class - extends a zim.Panel which extends a zim.Container which extends a createjs.Container DESCRIPTION A number pad that can be used on its own or with the ZIM Keyboard() which has a key at the bottom right to pop up the NumPad The Keyboard can also be shown with the NumPadOnly parameter set to true to make use of the labels parameter to target labels. See https://zimjs.com/zim/numpad.html NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const label = new Label("").pos(0,100,CENTER);

// The NumPad is built in to the Keyboard
// To set the parameters, such as titleBar, use STYLE before making the Keyboard
STYLE = {titleBar:"CALCULATE", align:CENTER};

const keyboard = new Keyboard({
   labels:label,
   numPadScale:.75,
   numPadOnly:true,
   numPadAdvanced:true
}).show();
keyboard.numPad.mov(0,120);

CLOSE ▲

DPad(axis, width, backgroundColor, borderWidth, borderColor, indicatorColor, indicatorPressColor, indicatorScale, indicatorRadius, innerCircle, innerScale, activeRadius, clamp, logo, style, group, inherit)

DPad zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION A DPad (Directional Pad) can be used to control x and y values This is primarily handy on mobile where a substitute for keypresses is needed The DPad can be set up for all directions, horizontal or vertical The DPad can be passed in to a ZIM MotionController to control an object See: https://zimjs.com/ten/dpad.html NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const dPad = new DPad().pos(50,50,LEFT,BOTTOM);
new MotionController({
   target:new Circle().center(),
   type:dPad,
   speed:mobile()?100:80,
   boundary:new Boundary(0,0,W,H)
});
S.update();

EXAMPLE

// importing zim_physics...
const physics = new Physics(0);
const ball = new Circle().center().addPhysics();
const dPad = new DPad().pos(40,40,LEFT,BOTTOM);
ball.control(dPad, 80);

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) axis - (default ALL) set to HORIZONTAL or VERTICAL or BOTH. Appropriate arrows will show width - (default 100) width of DPad backgroundColor - (default granite) the background color (any zim or html color) indicatorColor - (default moon) the color of the arrows indicatorPressColor - (default lighter) the color of the arrows as pressed indicatorScale - (default 1) the scale of the arrows indicatorRadius - (default null) set the indicator radius innerCircle - (default true) set to false to not show an inner circle innerScale - (default .5) the scale relative to the indicator activeRadius - (default width*2) radius at which the DPad works clamp - (default true) set to false to not limit the value between -1 and 1 logo - (default false) set to true to show the letter D in the DPad - or add your own style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS hasProp(property as String) - returns true if property exists on object else returns false clone() - makes a copy with properties such as x, y, etc. also copied dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String dirX, dirY - the x and y values for the DPad - between -1 and 1 if clamp is set these can be multiplied by a factor to adjust speed - or use speed parameter of associated MotionController blendMode - how the object blends with what is underneath - such as "difference", "multiply", etc. same as CreateJS compositeOperation enabled - default is true - set to false to disable ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS dispatches a "change" event with dirX and dirY provided as well on the event object ALSO see the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

Radial(labels, size, font, height, coreRadius, coreColor, startAngle, totalAngle, angles, flip, shiftV, icons, rollIcons, rotateIcons, iconsShiftVertical, backgroundColor, rollBackgroundColor, selectedBackgroundColor, selectedRollBackgroundColor, backdropColor, color, rollColor, selectedColor, selectedRollColor, borderColor, borderWidth, gradient, gap, gapAsAngle, spacing, spacingInner, spacingOuter, currentEnabled, currentSelected, index, selectedIndex, style, group, inherit)

Radial zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION A radial ring with selectable buttons with lables or icons Used internally by ZIM RadialMenu which has expandable rings for a hierarchical interface Radial uses LabelOnArc for labels NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

var radial = new Radial(["one", "two", "three", "four"])
   .center()
   .change(()=>{
      zog(radial.index);
   });
S.update();

CLOSE ▲

RadialMenu(menu, size, font, height, coreRadius, coreColor, title, titleIcon, startAngle, totalAngle, flip, shiftRadial, rotateIcons, iconsShiftRadial, backgroundColor, rollBackgroundColor, selectedBackgroundColor, selectedRollBackgroundColor, backdropColor, color, rollColor, selectedColor, selectedRollColor, borderColor, borderWidth, gradient, gap, gapAsAngle, spacing, spacingInner, spacingOuter, currentEnabled, currentSelected, open, under, style, group, inherit)

RadialMenu zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION An expanding hierarchy menu of button rings - using ZIM Radial objects. The menu is specified by a menu parameter in the format of a ZIM Hierarchy object. Styles for each ring can be specified in the menu object. Icons for each ring can be specified in the styles. See https://zimjs.com/ten/radial.html (ZIM TEN) NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const menu = {
   "one":[1,2,3,4], // an array is okay as all items are leaf nodes (end nodes)
   "two":{ // an object literal is required as one or more items hold other items
      "1":[], // this holds nothing (a leaf node) but still needs an empty array
      "2":["a", "b", "c"], // this holds a linear list - all leaf nodes
      "3":{ // this holds another nested list where at least one item holds more
         "emotions":["love","hate","happy","sad"],
         "flavors":["sweet","sour","bland","spicy"]
      }
   },
   "three":[1,2,3,4,5,6],
   "four":[1,2,3,4,5,6,7,8]
}
new RadialMenu(menu).sca(.5).center();

// OR ADD STYLES
// see https://zimjs.com/ten/radial.html for full example (ZIM TEN)
// any Radial parameters can go in the styles:{} brackets
// including icons and rollIcons
// and can use series to apply background colors and colors to individual buttons
// PS - this is the EXTRA version of the simple ZIM Hierarchy format
// here we pass styles as an extra property - list is required
// styles is optional but used by ZIM RadialMenu to apply associated styles

var menu = {
   list:{
      "one":{
         list:["A","B","C","D"], // an array is okay as all items are leaf nodes (end nodes)
         styles:{backgroundColor:blue}
      },
      "two":{
         list:{ // an object literal is required as one or more items hold other items
            "1":[], // this holds nothing (a leaf node) but still needs an empty array
            "2":{
               list:["a", "b", "c"], // this holds a linear list - all leaf nodes
               styles:{}
            },
            "3":{ // this holds another nested list where at least one item holds more
               list:{
                  "emotions":{
                     list:["love","hate","happy","sad"],
                     styles:{}
                  },
                  "flavors":{
                     list:["sweet","sour","bland","spicy"]   ,
                     styles:{}
                  }
               },
               styles:{}
            }
         },
         styles:{}
      },
      "three":{
         list:[1,2,3,4,5,6],
         styles:{}
      },
      "four":{
         list:[1,2,3,4,5,6,7,8],
         styles:{}
      }
   },
   // the styles for the first list
   // here we make each backgroundColor a different color
   styles:{backgroundColor:series(red,green,blue,yellow)}
}

new RadialMenu(menu).sca(.5).center();
S.update();

CLOSE ▲

ColorPicker(width, colors, cols, spacing, greyPicker, alphaPicker, startBackgroundColor, draggable, shadowColor, shadowBlur, buttonBar, circles, indicator, backgroundColor, keyArrows, container, index, selectedColor, dropperTarget, spectrumCollapse, spectrumMode, spectrumClose, spectrumOk, spectrumTitle, tolerancePicker, collapsed, selectedIndex, style, group, inherit)

ColorPicker zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION A traditional color picker which shows 256 Web colors by default or custom colors. Can additionally show 16 greys and / or an alpha slider. Picking on a color sets the swatch color and the selectedColor property. OK dispatches a "change" event if the color changed or a close event if not. The X dispatches a "close" event. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const cp = new ColorPicker()
   .show() // use show() and hide() with ColorPicker. As of ZIM ZIM 01 can also use pos(), loc(), center(), etc.
   .change(()=>{
      zog(cp.selectedColor); // #ffcc99, etc. after pressing OK
      zog(cp.selectedAlpha); // 0-1
   });

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) width - (default 500) the width of the color picker colors - (default "spectrum") - this shows a color spectrum, drag bar with collapse, mode and close (if no buttonBar) these can be configured with ColorPicker parameters (see spectrum parameter near end of parameters). The mode toggles between a gradient and pixel blocks Set the colors to "legacy" to show the traditional 256 colors or pass in an optional list of colors ["red", "#CCC", etc.] cols - (default 10) how many columns to use if you pass in custom colors spacing - (default 2) is the space between the color squares greyPicker - (default true unless one row) shows an extra 16 greys (set to false to hide these) for the default colors it also includes 2 starting colors that record last picked colors alphaPicker - (default true unless one row) shows an alpha slider (set to false to hide this) the swatch has a black, grey and white backing underneath to show multiple alpha effects startBackgroundColor - (default the last color in color array) the starting color draggable - (default true (false if no buttonBar or no spectrum)) whether you can drag the component - set to false to not drag a small grip under the color text shows if draggable shadowColor - (default rgba(0,0,0,.3)) set to -1 for no drop shadow shadowBlur - (default 14) the blur of the shadow if shadow is set buttonBar - (default true unless one row) set to false to hide the button bar with OK and X (close) circles - (default false) set to true to show colors in circles rather than squares indicator - (default true) set to false to remove indicator from currentBackgroundColor backgroundColor - (default black) the color of the background keyArrows - (default true) set to false to disable keyboard arrows container - (default zimDefaultFrame) if using show(), hide(), toggle() can set which container to center on index - (default 0) - set the index at start dropperTarget - (default null) - set to a DisplayObject to use dropper on the target - such as the stage the dropper will always work on the spectrum dropperTarget will cache the target so a color can be picked from it but this is modal on the target so buttons, etc. cannot be used and animations will not be seen spectrumCollapse - (default true) - if spectrum color is set, set to false to not show a collapse button spectrumMode - (default true) - if spectrum color is set, set to false to not show a mode button spectrumClose - (default true) - if spectrum color is set, set to false to not show a close button spectrumOk - (default true) - if spectrum color is set and there is a buttonBar, set to false to not show an OK button spectrumTitle - (default null) - if spectrum color then this is the title - for example, set to "Color Picker" collapsed - (default false) - if spectrum and spectrumCollapse then set to true to start collapsed tolerancePicker - (default false) - show a slider for tolerance - useful for when using ColorPicker to keyOut a color note: this will automatically hide the alphaPicker selectedIndex - same as index, kept in for backwards compatibility in ZIM DUO style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS show() - show the picker (returns the picker for chaining) (as of ZIM ZIM 01 can also use pos(), loc(), center(), etc.) hide() - hides the picker (as of ZIM ZIM 01 can also use removeFrom()) toggle(state - default null) - shows if hidden and hides if showing (returns the picker for chaining) or pass in true to show picker or false to hide picker toggleSpectrum(state - default null) - if run without state will toggle the spectrum mode or pass in true to show gradient or false to show pixel blocks collapse(state - default true) - with the "spectrum" setting, set state to true (default) to collapse or false to expand the picker updateDropperTarget() - with the "spectrum" setting, a cached view of the dropperTarger is shown to pick the color from using updateDropperTarget() will update this cached view - it is processor intensive so beware hasProp(property as String) - returns true if property exists on object else returns false clone() - makes a copy with properties such as x, y, etc. also copied dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String selectedColor - gets or sets the selected color swatch value - same as selectedColor but consistent with other components currentValue - same as value - kept in for backwards compatibility valueEvent - gets or sets the current value and dispatches a "change" event if set and changed selectedAlpha - gets or sets the selected alpha (set does not work if alphaPicker is false) index - get or sets the selected index of the colorPicker colors - read only array of colors in picker - not including greys - or "spectrum" greys - read only array of greys in picker if the grey picker is set toggled - read-only Boolean property as to whether picker is showing collapsed - read-only Boolean property as to whether picker is collapsed swatch - gets the Rectangle that is the color swatch swatchBacking - gets the zim Shape that is under the swatch (seen if alpha set low) swatchText - gets the Label that shows the color text grip - gets the createjs.Shape for the grip if the panel is dragable background - gets the Rectangle that is the background (cp.background.color = "white" - now a backgroundColor parameter) okBut - references the OK Button closeBut - references the X Button indicator - gets the zim shape that is the indicator (if indicator is true) title - reference to the spectrum title Label NOTE for colors:"spectrum" dropper - reference to the circle dropper gradient - reference to the gradient spectrum Bitmap pixels - reference to the pixel spectrum Bitmap closeIcon - reference to the close icon if there is one on the top bar modeIcon - reference to the mode icon if there is one on the top bar collapseIcon - reference to the collapse icon if there is one on the top bar spectrumToggled - read-only Boolean that is true if gradient and false if spectrum is pixel blocks NOTE if alphaPicker is true: alphaBacking - gets reference to the Rectangle that makes the backing for the alpha slider alphaBut - the Button on the alpha slider alphaSlider - the Slider for the alpha alphaText - the Label for the alpha NOTE if tolerancePicker is true: toleranceBacking - gets reference to the Rectangle that makes the backing for the tolerance slider toleranceBut - the Button on the tolerance slider toleranceSlider - the Slider for the tolerance toleranceText - the Label for the tolerance blendMode - how the object blends with what is underneath - such as "difference", "multiply", etc. same as CreateJS compositeOperation keyFocus - get or set the keyboard focus on the component - see also zim.KEYFOCUS will be set to true if this component is the first made or component is the last to be used ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. ACTIONEVENT This component is affected by the general ACTIONEVENT setting The default is "mousedown" - if set to something else the component will act on click (press) EVENTS NOTE these have been updated in ZIM 00 dispatches a "change" event when the color swatch changes or if no swatch when a color is picked. also dispatches when the alpha is changed if there is an alpha picker. also dispatches when the tolerance is changed if there is an tolerance picker. also dispatches when text of color is changed. dispatches a "swatch" event when the swatch is pressed. dispatches an "ok" event when the OK button is pressed. dispatches a "close" event when the close button is pressed. Automatically closes the ColorPicker. dispatches a "collapsed" event when collapsed in spectrum color mode. dispatches a "expanded" event when expanded in spectrum color mode. ALSO see the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

EmojiPicker(width, height, emojis, monochrome, backgroundColor, titleBar, titleBarColor, titleBarBackgroundColor, titleBarHeight, cache, size, collapse, collapseColor, collapsed, colSize, rowSize, style, group, inherit)

EmojiPicker zim class - extends a zim.Window which extends a zim.Container which extends a createjs.Container DESCRIPTION An Emoji picker panel. Can customize the list of emojis. Gives a zim Emoji object as currentEmoji property on a "change" event SEE: https://zimjs.com/nft/bubbling/emoji.html NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const emojiPicker = new EmojiPicker()
   .center()
   .change(() => {
      // we will make a bigger emoji by passing the code of the currentEmoji
      // to the new Emoji - you can clone and then scale but that can look blotchy
      const emoji = new Emoji(emojiPicker.currentEmoji.code, 200)
         .centerReg()
         .drag();
      S.update();
   });

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) width - (default 400) the width of the window height - (default 500) the height of the window emojis - (default a big list!) an array of UTF codes for emojis ["\ud83d\udca5","\ud83c\udf35", etc.] can view the code page https://zimjs.com/code.php?view=67.05 to get raw list to modify monochrome - (default false) set to true to greyscale the emojis this had better performance when Chrome made black and white emojis in a bold bug too bad - hope they bring them back. backgroundColor - (default lighter) background color (use clear - or "rbga(0,0,0,0)" for no background) titleBar - (default "Emojis") a String or ZIM Label title for the panel that will be presented on a titleBar across the top note: set STYLE = {titleBar:false, close:false} to turn off title bar and remove close button titleBarColor - (default black) the text color of the titleBar if a titleBar is requested titleBarBackgroundColor - (default "rgba(0,0,0,.2)") the background color of the titleBar if a titleBar is requested titleBarHeight - the height of the titleBar if a titleBar is requested cache - (default false or true if mobile) - cache the collection of emojis for better performance - will not look as crisp on desktop size - (default 30) - the size of the emojis in the picker collapse - (default false) - set to true to add a collapse icon to the titleBar that reduces the window so only the bar shows and adds an icon to expand also can double click bar to collapse window collapseColor - (default grey) - the color of the collapse icon collapsed - (default false) set to true to start the window collapsed colSize - (default size+15) - the size of the columns rowSize - (default size+14) - the size of the rows style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO see all the methods of the ZIM Panel ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String selectedEmoji - get the selected emoji - this is a zim Emoji object clone the object to let the user use it or make a new Emoji() from the selectedEmoji.code and pass in a different size, etc. emojiData - get the list of emojis - warning, if zog to console they will look like emojis wrapper - the ZIM Wrapper used for the picker ALSO see all the properties of the ZIM Panel including close, titleBar, etc. ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS dispatches an "emoji" event when an emoji is picked dispatches a "closed" event when closed ALSO see the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

TextEditor(width, color, backgroundColor, fieldColor, fieldHeight, textSize, sizeList, optionList, colorList, fontList, live, button, titleBar, titleBarColor, titleBarBackgroundColor, titleBarHeight, wrap, limit, scroll, placeholder, password, borderColor, borderWidth, margin, corner, shadowColor, shadowBlur, draggable, boundary, frame, fontListHeight, fontListViewNum, style, group, inherit)

TextEditor zim class - extends a zim.Panel which extends a zim.Container which extends a createjs.Container DESCRIPTION A configurable text editor for a ZIM Label - or text in code memory. Call the editor.show(label) method and pass in the label - it will let the user change the following properties: text, color, bold, italic, align, size, and font Which ones the editor uses can be set with parameters. SEE: https://zimjs.com/cat/texteditor.html NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const label = new Label({
   text:"press to edit with TextEditor",
   italic:true,
   align:CENTER,
   font:"verdana"
})
   .center()
   .expand()
   .tap(()=>{
      textEditor.show(label);
   });

const textEditor = new TextEditor({
   colorList:true, // or array of colors
   optionList:["bold","italic","align"], // or true, or array with any of these
   sizeList:true, // or array of sizes
   fontList:true, // or array of fonts
   live:true, // default
   scroll:true // default, etc.
});

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) The TextEditor is made of of the following sub components and many styles need to be set on the sub component types: Panel, TextArea, Button, ColorPicker, Selector, Stepper, List For instance STYLE = {type:{Panel:{titleBarBackgroundColor:red}}} width - (default 400) the width of the editor color - (dark) the color of the TextArea text in the editor backgroundColor - (default lighter) the background color of the editor fieldColor - (default backgroundColor darkened .05) - the background color of the TextArea fieldHeight - (default button height plus 2 margins) - the height of the TextArea textSize - (default 20) the size of the text in the TextArea sizeList - (default false) set to true to show numbers from 5-500 or set to an array of numbers used for the size Stepper [10,12,14,16] for instance optionList - (default false) set to true to show ["bold", "italic", "align"] or set to an array with any of these values ["bold", "italic"] for instance colorList - (default false) set to true to show the default ZIM ColorPicker or set to an array with colors [red, green, blue, black, "violet", "#333"] for instance fontList - (default false) set to true to show a default list of fonts "Arial", "Courier New", "Georgia", "Helvetica", "Palatino", "Tahoma", "Verdana", // plus on desktop: "Impact", "Comic Sans" or set to an array with desired fonts ["courier", "verdana"] for instance live - (default true) will update the label as the text is typed set to false to update only on button press - note, other setting update live regardless button - (default green check) set to a custom ZIM Button if desired titleBar - (default "Text Editor") a String or ZIM Label title for the panel that will be presented on a titleBar across the top titleBarColor - (default black) the text color of the titleBar if a titleBar is requested titleBarBackgroundColor - (default "rgba(0,0,0,.2)") the background color of the titleBar if a titleBar is requested titleBarHeight - (default fit label) the height of the titleBar if a titleBar is requested wrap - (default true) set to false to not wrap text in TextArea (wrapping on the actual label can be done with label.lineWidth) limit - (default null) set to a number to limit the TextArea number of characters scroll - (default true) set to false to not show a vertical scrollbar when needed - note if textHeight is not high enough, a scrollbar may not show placeholder - (default null) set to true to show default text - will be overwritten with label text if there is text password - (default false) set to true to make the TextArea a password field - shows dots - the label will not show dots borderColor - (default pewter) border color borderWidth - (default 1) the thickness of the border margin - (default 10) the margin around the various sub components corner - (default 0) the round of corner can also be an array of [topLeft, topRight, bottomRight, bottomLeft] shadowColor - (default "rgba(0,0,0,.3)" if shadowBlur) the shadow color - set to -1 for no shadow shadowBlur - (default 14 if shadowColor) the shadow blur - set to -1 for no shadow draggable - (default true if titleBar) set to false to not allow dragging titleBar to drag window boundary - (default null) set to ZIM Boundary() object - or CreateJS.rectangle() frame - (default zdf - ZIM Default Frame) pass in a frame if not the default frame - lets TextArea and ColorPicker work fontListHeight - (default 100) the height of the font list if there is one fontListViewNum - (default 3) the number of fonts to show in the font list if there is one style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS show(label, x, y, frame) - show the editor and pass in the label to operate on the editor will appear centered above or below the text depending on where there is more room this can be overridden with the x and y parameters the TextEditor will show on the stage of the Label if the label is not on the stage then the stage of the frame parameter otherwise the stage of the ZIMDefaultFrame If the editor is already open it will not move Calling show(label2) on a different label will switch the editor to that label see also the label property hide() - hides the editor closeColorPicker() - close the ColorPicker - this needs to display the text (which is hidden when the ColorPicker opens) hasProp(property as String) - returns true if property exists on object else returns false clone() - makes a copy with properties such as x, y, etc. also copied dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO see all the methods of the ZIM Panel ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String textArea - reference to the TextArea label - get or set the label associated with the textEditor button - reference to the Button if various features are set: swatch - reference to the Rectangle showing color colorPicker - reference to the ColorPicker bold - reference to the bold Button italic - reference to the italic Button align - reference to the align Selector size - reference to the size Stepper font - reference to the font List ALSO see all the properties of the ZIM Panel including close, titleBar, etc. ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. ACTIONEVENT This component is affected by the general ACTIONEVENT setting The default is "mousedown" - if set to something else the component will act on click (press) EVENTS dispatches an "input" event when the text is changed - although default is to update live dispatches an "update" event when any property is changed and where text is changed dispatches a "set" event when button is pressed dispatches a "close" event when closed dispatches a "color" event when ColorPicker is opened ALSO see the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

Keyboard(labels, backgroundColor, color, shiftBackgroundColor, shiftHoldBackgroundColor, placeBackgroundColor, placeColor, cursorColor, shadeAlpha, borderColor, borderWidth, margin, corner, draggable, placeClose, shadowColor, shadowBlur, container, data, place, placeShiftH, placeShiftV, placeScale, special, rtl, hardKeyboard, layout, numPadScale, numPadDraggable, numPadOnly, numPadAdvanced, maxLength, numbersOnly, style, group, inherit)

Keyboard zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION The Keyboard class makes a keyboard ideal for mobile or touch screens. Often, it seems the mobile keyboard can cause problems with layout. This in-canvas keyboard requires much less testing and concern. The Keyboard can work with ZIM Labels to give input text without a TextArea. Thanks Frank Los for the initial design and coding of the Keyboard. Keyboard also captures hard keyboard keydown and will type that as well See https://zimjs.com/keyboard NOTE press and hold down the vowels for multiple vowel options NOTE multi-line Label and TextArea input is not supported NOTE the width of the Label can be set by the Label's lineWidth paremeter NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// create Labels to capture the text from the keyboard
const text1 = new Label({text:"", backgroundColor:white}).pos(100,100);
const text2 = new Label({text:"", backgroundColor:white}).pos(100,200);

// create a new Keyboard and pass in the labels as an array
// or if just one label, then pass in the label
const keyboard = new Keyboard([text1, text2]);

// if just the letter is needed use the keydown event
keyboard.on("keydown", e=>{
   zog(e.letter);
});

// create events to capture a mousedown on the labels
const text1Event = text1.on("mousedown", activate);
const text2Event = text2.on("mousedown", activate);
function activate(e) {
   keyboard.show();
   // remove the events when keyboard is active
   text1.off("mousedown", text1Event);
   text2.off("mousedown", text2Event);
}
keyboard.show(); // optionally show the keyboard to start

// add back the events to show the keyboard
keyboard.on("close", ()=>{
   text1.on("mousedown", text1Event);
   text2.on("mousedown", text2Event);
});

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) labels - (default null) a ZIM Label to show letters in or an array of labels Keyboard will add a cursor to the Labels and provide management across multiple labels currently, multiline labels are not supported setting the label lineWidth will set the max width of the label backgroundColor - (default dark) an css color for the background color of the keys color - (default white) the color of the text shiftBackgroundColor - (default "orange") the color of the active shift key shiftHoldBackgroundColor - (default "red") the color of the active shift hold key placeBackgroundColor - (default "50c4b7") the color of the arrow backings when placing cursor in label placeColor - (default "50c4b7") the color of the arrow text when placing cursor in label cursorColor - (default "50c4b7") the cursor color shadeAlpha - (default .2) special keys are shaded darker by this alpha margin - (default 5) the margin around the keyboard from the container width corner - (default 30) the round of the corner (set to 0 for no corner) can also be an array of [topLeft, topRight, bottomRight, bottomLeft] draggable - (default false) set to true to show the drag handle at top right placeClose - (default true) shows an x key to close the cursor placement menu shadowColor - (default "rgba(0,0,0,.2)") set to -1 for no shadow shadowBlur - (default 14) how blurred the shadow is if the shadow is set container - (default zimCurrentFrame stage) if placing Keyboard in different container or stage data - (default see below) pass in data for the letters on the three sets of keyboards also see the layout parameter for current default layouts like "arabic", "hebrew", etc. Below is the default data - change any of the keys to change keyboard There must be three boards (you can request more) There must be a button specified on the fourth row to toggle to the second screen and back There must be a button on the second and third screen at the start of the third row to toggle between the second and third screen The "shift" and "delete" keys are optional and can be moved or removed There is a "back" key that is like the "backspace" key but takes the space of one key and not two keys There will be at least 10 key places but there can be more than 10 keys per row The last element of the outer array is a an object with special characters for e,u,i,o,a,n If left off then it will use the characters below in the example. These can be changed to any characters showing an extra set of any characters. The fifth and sixth elements are lowercase to uppercase and uppercase to lowercase override mappings For instance, in the turkish layout ı:"I" and i:"İ" for lowercase to uppercase and I:"ı" and İ:"i" for uppercase to lowercase. Use the data property to get this array if desired: var data = [ [ ["q","w","e","r","t","y","u","i","o","p"], ["a","s","d","f","g","h","j","k","l"], ["shift","z","x","c","v","b","n","m","backspace"], ["?123"] // rest of bottom line automatically added ],[ ["1","2","3","4","5","6","7","8","9","0"], ["!","@","#","$","/","^","&","*","(",")"], ["1/2","-","'", "\"",":",";",",","?","backspace"], ["ABC"] // rest of bottom line automatically added ],[ ["+","x","%","=","<",">","{","}","[","]"], ["€","£","¥", "$", "￦", "~", "`","¤","♡","☆"], ["2/2","_","\\","|","《","》","¡","¿","backspace"], ["ABC"] // rest of bottom line automatically added ],{ e:["ė","ē","ę","ê","é","ë","è"], u:["ū","û","ú","ü","ù"], i:["ī","į","ì","í","ï","î"], o:["ō","œ","ø","õ","ô","ó","ö","ò"], a:["ā","ã","å","â","á","ä","à","æ"], n:["ñ","ń"] },{ lowercaseletter:"uppercaseletter", // override lowercase to uppercase map lc2:"uc2" },{ uppercaseletter:"lowercaseletter", // override uppercase to lowercase map uc2:"lc2" } ]; place - (default true) set to false to not add place arrows when selecting Label placeShiftH - (default 0) set to shift place arrows horizontal - from default location placeShiftV - (default 0) set to shift place arrows vertically - from default location placeScale - (default 1) set the place menu scale special - (default null) set to a string to add a special key to the left of the space bar rtl - (default false) (Experimental) set to true to use right-to-left text hardKeyboard - (default true) set to false to not include keypresses from physical keyboard layout - (default "qwerty") set to change the layout (also see data parameter for custom layout) additionally supported layouts are "azerty", "hebrew", "turkish", "arabic" - thanks to those who submitted layouts! please let us know at https://forum.zimjs.com if you are using a layout that others would use! numPadScale - (default .8) the scale of the NumPad when pressed from the numPad key at bottom right numPadDraggable - (default true) set to false to not be able to drag the NumPad numPadOnly - (default false) set to true to open the NumPad only but can then use with labels numPadAdvanced - (default false) set to true to add an extra row to the NumPad with round brackets, exponential and percent or modulus keys maxLength - (default null) set to a number for the maximum characters - also see maxLength property numbersOnly - (default false) set to force numbers only - also see numbersOnly property style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS show(index) - shows the Keyboard - use this rather than addTo(), etc. index (default null) specify the index of the labels array to show cursor in hide() - hides the keyboard toggle(state - default null) - shows if hidden and hides if showing (returns the keyboard for chaining) or pass in true to show keyboard or false to hide keyboard setText(text) - change the current label text to the text provided clearText() - clear the current label text addChar(char) - add a character to the currentLabel at the currentIndex removeChar() - removes the chararcter in the currentLabel at the currentIndex-1 (a backspace) addLabels(labels) - add a ZIM Label or an array of Labels to the labels list for the Keyboard removeLabels(labels) - remove a ZIM Label or an array of Labels showNumPad() - shows the NumPad - also see Keyboard numPadOnly parameter and the NUMPAD key hideNumPad() - hide the NumPad - also see the NUMPAD key and the x on the NumPad showKeyboard() - specifically shows the keyboard if numPadOnly is set hideKeyboard() - specifically hides the keyboard but may still show the NumPad showPlace() - show the place menu for cursor hidePlace() - hide the place menu for cursor resize() - scales the keyboard to the stage with margin and places at bottom of screen hasProp(property as String) - returns true if property exists on object else returns false clone() - makes a clone of the Keyboard dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String data - get the data array for the keyboard - see the data parameter for details and to set value for data labels - get the labels array - use addLabels() and removeLabels() to set selectedLabel - the label with the cursor or -1 if no cursor index - the index of the cursor in the selected label or -1 if no cursor toggled - read-only Boolean that is true if keyboard is visible and false if not keys - reference to the keyboard itself numPad - reference to the NumPad once it has been shown once placeMenu - reference to the place menu maxLength - get or set the maximum characters - will not change existing label numbersOnly - get or set to force numbers only - will not change existing label ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS Dispatches a "keydown" event with an event object having a letter property keyboard.on("keydown", function(e) {zog(e.letter);}); // logs letter pressed or "del" for delete Dispatches a "special" event if the special parameter is used and the special key is pressed Dispatches a "close" event when close keyboard icon at bottom right is pressed Dispatches "numpadopen" and "numpadclose" events when the NumPad is opened or closed ALSO see the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

Organizer(width, list, useAdd, useRemove, usePosition, autoAdd, autoRemove, autoPosition, addForward, removeForward, backgroundColor, rollBackgroundColor, selectedBackgroundColor, selectedRollBackgroundColor, color, rollColor, selectedColor, selectedRollColor, spacing, corner, keyEnabled, gradient, gloss, backdropColor, style, group, inherit)

Organizer zim class - extends a zim.Tabs which extends a zim.Container which extends a createjs.Container DESCRIPTION A Tabs bar of interface for organizing a ZIM List. This includes add, up, down, toTop, toBottom and remove icon buttons. The Organizer can sit above the list and allow the user to add, remove and reorder the list. Adding an item will add an empty button - this would need to be filled with the user input, etc. If the user input is not ready, the autoAdd parameter can be set to false. The change event will report an orgType of "add" and the add() method can be used when the input is ready. The same for positioning or removing if desired. See: https://zimjs.com/explore/organizer.html NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

   const organizer = new Organizer(250)
      .change(()=>{
         if (organizer.orgType=="add") organizer.orgItem.text = "new";
      });
   new List({
      width:250,
      organizer:organizer // pass the organizer to the list
   });
      .center()
      .mov(0,40);

   // OR

   const list = new List(250)
      .center()
      .mov(0,40);
   var organizer = new Organizer(250, list)
      .center()
      .mov(0,-80)
      .change(()=>{
         if (organizer.orgType=="add") organizer.orgItem.text = "new";
      });

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) width - (default 300) width of Tabs - this will determine the height as the Buttons are square. There is no vertical version of an Organizer. list - (default null) an ZIM List object to control - or null to add later with the list property useAdd - default(true) set to false to not include the add button useRemove - default(true) set to false to not include the remove button usePosition - default(true) set to false to not include the position buttons (up, down, toTop, toBottom) autoAdd - default(useAdd) set to false to not automatically add an item the "change" event will still be dispatched and the orgType will be "add" the add() method can be used to add user input for instance autoRemove - default(useRemove) set to false to not automatically add an item the "change" event will still be dispatched and the orgType will be "remove" the remove() method can be used to manually remove autoPosition - default(usePosition) set to false to not automatically position an item the "change" event will still be dispatched and the orgType will be UP, DOWN, TOP, BOTTOM the up(), down(), toTop(), toBottom() methods can be used to manually position addForward - (default true) set to false to add item behind the current item (in list index) when adding removeForward - (default true) set to false to select the item before the current item (in list index) when deleting backgroundColor - (default tin) the background color of the buttons rollBackgroundColor - (default grey) the background color of the button as rolled over selectedBackgroundColor - (default charcoal) the background color of the button when selected color - (default white) the text color of a deselected button when not rolled over rollColor - (default color) the rollover color selectedColor - (default color) the text color of the selected button selectedRollColor - (default color) the text color of the rolled over selected button spacing - (default 2) the distance between the buttons corner - (default 0) the corner radius of the tabs can also be an array of [topLeft, topRight, bottomRight, bottomLeft] keyEnabled - (default true) so tab key cycles through tabs, shift tab backwards gradient - (default null) 0 to 1 (try .3) adds a gradient to the buttons gloss - (default null) 0 to 1 (try .1) adds a gloss to the buttons backdropColor - (default dark) the background color of the list window (any CSS color) style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS add(index, item, clone) - manually add item at index - both are optional - index defaults to current index clone defaults to false - set to true to add a clone of the item - returns object for chaining up(index) - move item up one index number in list - index defaults to current index - returns object for chaining down(index) - move item down one index number in list - index defaults to current index - returns object for chaining toTop(index) - move item to top of list (index 0) - index defaults to current index - returns object for chaining toBottom(index) - move item bottom of list (index length-1) - index defaults to current index - returns object for chaining remove(index) - manually remove item at index - index defaults to current index - returns object for chaining setButtons() - manually rotate buttons to match List direction - automatically done when added to list or list is initially added to organizer hasProp(property as String) - returns true if property exists on object else returns false clone() - makes a copy with properties such as x, y, etc. also copied dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO All Tab methods ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String list - the list the organizer is operating on lastIndex - read-only selected index before change event is dispatched orgIndex - read-only current index of list - same as list.currentIndex orgItem - read-only selected item of list - same as list.selected orgType - read-only type of button pressed - "add", "remove", UP, DOWN, TOP, BOTTOM removedItem - a reference to the item that has been removed when removed button is pressed or remove() is called group - used when the object is made to add STYLE with the group selector (like a CSS class) ALSO see all Tab properties ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS dispatches a "change" event when the buttons are pressed (may be the same button again) use orgType for what type "add", "remove", UP, DOWN, TOP, BOTTOM use orgIndex or list.currentIndex for current list index use orgItem or list.selected for selected item use removedItem for a removed item use lastIndex for index before change ALSO All Tab events ALSO see the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

Connectors(width, height, points, node, line, linear, linearWrap, linearOrder, num, snapH, snapV, dropType, dropArray, continuous, startIndex, duplicateLine, deleteNode, dblclick, fullMove, min, max, boundary, expand, nodeRollColor, nodeRollBorderColor, nodeSelectedColor, nodeSelectedBorderColor, baseColor, baseBorderColor, baseRollover, rootLock, grandChildren, dblclickTime, steps, style, group, inherit)

Connectors zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION Adds nodes (any DisplayObject - default a Circle) that can be dragged to draw a connector line. There are three main uses for Connectors: 1. Connecting dots like in coloring books - use linear:true 2. Making hieararchy type drawings - use snaps 3. Connecting objects like boxes together - pass in objects to the points The num parameter limits the number of lines that can be drawn from a node. The dropType can be set to require nodes to be dropped on or off other nodes (or the default, any). There are min and max distances the connections can be made. These and the other parameters provide a variety of game and puzzle options. The Line can be set to have start and end heads. The lineType in the Line can be set to "straight", "corner" or "curve" Line also accepts points for any arrangement of a connector but in this version, these have not been used in Connectors. BASE A DisplayObject can be used as a base for the connector and have nodes added. A base can have multiple nodes attached on any of its sides This approaches diagramming tools like Powerpoint, etc. but currently, only vertically placed nodes can connect to vertically placed nodes and horizontally placed nodes can connect to horizontally placed nodes. DropType single works per node, not per base so use a single node on a base for this. A base can be a Blob or a Squiggle as well with nodes added to points. See: https://zimjs.com/cat/connectors.html PREMADE CONNECTIONS As of ZIM ZIM 02, Connectors() have a steps property that represents connections made. Use getSteps(true) when done making connections - this will popup an array of steps. Copy this array of steps to the steps parameter of the Connector() in the app code. Connectors will then be made and the additional steps added. Connectors can also be added to a ZIM TransformManager() so users can easily recreated their connections. See https://zimjs.com/zim/connectors.html See https://www.youtube.com/watch?v=ISjW2khGrxo NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// draws four general connectors that can be connected to one another in a box
// adjust connector nodes after connections are complete
const connectors = new Connectors({linear:true}).center();
connectors.on("complete", ()=>{
   connectors.nodes.loop(node=>{
      node.radius = 5;
      node.color = red;
   });
   // or hide connectors
   // connectors.nodes.alp(0);
   S.update();
});

EXAMPLE

// make a grid of connectors and only connect to other nodes
// do not let user delete a node or doubleclick to move a node
const points = [];
const spacing = 60;
loop(10, i=>{
   loop(10, j=>{
      points.push([i*spacing, j*spacing]);
   });
});
const connectors = new Connectors({
   points:points,
   node:new Rectangle(12,12,purple).centerReg(),
   line:new Line({color:purple, thickness:12}),
   nodeRollColor:orange,
   dropType:"on",
   dblclick:false,
   deleteNode:false,
   max:70
}).center();

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) width - (default null) the width of the connnectors container or will grow with added connectors height - (default null) the height of the connnectors container or will grow with added connectors points - (default [[0,0], [100,0], [100,100], [0,100]]) an array of point arrays for the connectors or can be [[x, y, startNode, endNode, startLength, endLength], etc] x - the x position of the node y - the y position of the node startNode - (default true) set to false to not drag from node endNode - (default true) set to false to not drop on node startLength - (default null) set line startLength - see Connectors line parameter (for corner or curve lineType) endLength - (default null) set line endLength - see Connectors line parameter (for corner or curve lineType) example: [[0,0,true,false,50], [100,0,false,true], ...] would allow dragging from the first to the second but not the second to the first and if the line (see line parameter) is lineType corner or curve the start length would be 50 Another point could have a different startLength to avoid overlapping lines A convenience object literal can be used as well for any or all points: [{x:0, y:0, endNode:false, startLength:50}, {x:100, y:0, startNode:false}, ...] or the first two items in the array can can be a base (that connectors nodes will be added to) and baseInfo as follows: [[base, baseInfo], [base, baseInfo], [base, baseInfo], etc.] these can have the startNode, endNode, startLength, endLength as well and can have the object literal format as follows: [{base:base, info:baseInfo, etc.}, etc.] rather than the x:x and y:y properties the baseInfo can be a number of nodes to place around all base sides or baseInfo can be an array with three different formats: [all] [left/right, top/bottom] [left, right, top, bottom] These can be numbers greater than 0 for the number of nodes on the side or 0 for no nodes on the side or -1 for both corners on the side or -2 for the first corner on the side or -3 for the second corner on the side or can specify a ZIM Blob or Squiggle to place connectors on their points so: points:blob or points:squiggle the Blob or Squiggle do not need to be added to the stage use the getPoints(true) method of the Blob or Squiggle or see https://zimjs.com/paths/ node - (default new Circle(10, grey, grey)) the DisplayObject to use as a node - should be centerReg() line - (default new zim.Line({thickness:3, color:tin, strokeObj:{caps:"round"}})) the line to use as the connector ZIM Line has a lineType parameter for "straight", "corner", and "curve" which will affect the connector lines ZIM Line has a lineOrientation parameter of AUTO, HORIZONTAL or VERTICAL that will affect the connector lines ZIM LIne has startLength and endLength parameters that work with "corner" and "curve" these accept ZIM VEE to dynamically set random or a series of values that can help avoid overlapping lines or these values can be set individually on the points parameter or on bases directly as properties which will override any values set on the line provided here in the line parameter ZIM Line as curveH and curveV settings that will adjust the lines for the "curve" setting the caps should be set to "round" if drawing with clear or transparent nodes linear - (default false) lines will only connect to points that are next to one another (in the point order) this is good for connecting dots linearWrap - (default true) let the first point connect to the last point in the linear setting linearOrder - (default false) require the points to be connected in order num - (default null) set the maximum number of lines that can come from a node snapH - (default null) snap the nodes to a provided horizontal distance snapV - (default null) snap the nodes to a provided vertical distance dropType - (default "any") determines what happens when a node is dropped as follows: "any" lets the node be dropped anywhere (and may be snapped) "on" will save the node if dropped on an existing node otherwise it is removed or put back to where it is dragged from "off" will save the node if not dropped on an existing node otherwise it is removed or put back to where it is dragged from "single" will save the node if dropped on a node with no existing connections otherwise it is removed or put back to where it is dragged from note - these only work with the currently dragged node - not other multiple selected nodes dropArray - (defult null) with "on" or "single" dropType and NOT linear - specify which nodes a node can be connected to use an array of arrays for each point index [[indexes], [indexes], etc] eg. [[1,2],[0,2],[3],[0,1]] - if in "on", point 0 can go to 1 or 2, point 1 can go to point 0 or 2, point 2 can only go to 3, etc. if "single" is set then only one line can be drawn also see dropIndex and dropArray for each node and the targetNode property each time a connection is made, a new node is created - these will inherit the dropIndex and dropArray from a targetNode and if the latestNode's dropArray and its lineArray are the same and the duplicateLine is false then a "blocked" event is dispatched continuous - (default false) set to true to force nodes to only be made from the last node all other nodes will have their noMouse() set - also see startIndex - also see linear for doing points in order startIndex - (default null) set to a point index to force connectors to start at that node all other nodes will have there noMouse() set - also see continous duplicateLine - (default true) set to false to not allow multiple lines between the same connectors deleteNode - (default true) set to false to not allow nodes to be deleted by holding or doubleclicking and delete key dblclick - (default true) set to false to not allow nodes to be selected by doubleclicking selected nodes can be moved together selecting a node selects its children unless the ctrl key is held at which point it will not select children selected nodes can be deleted with the delete key (or hold to delete) deleting a node will delete its children fullMove - (default true) set to false to not automatically drag a node when it is full (if num is set) min - (default node radius or smallest dimension) the minimum distance from the node's parent a node must move before placing node max - (default null) the maximum distance from the node's parent a node can be moved to be placed boundary - (default null) a ZIM Boundary object for the nodes - or a DisplayObject such as the stage (see ZIM Drag) expand - (default 0 or 10 on mobile) expand the node mousedown area nodeRollColor - (default node.color.lighten(.2)) the color of the node as rolled over nodeRollBorderColor - (default node.borderColor) the borderColor of the node as rolled over nodeSelectedColor - (default white) the selected node color if doubleclicked nodeSelectedBorderColor - (default node.borderColor) the selected node borderColor if doubleclicked baseColor - (default node.color) the color of the node connected to a base DisplayObject (see points parameter) baseBorderColor - (default node.borderColor) the borderColor of the node connected to a base DisplayObject (see points parameter) baseRollover - (default false) set to true to change all nodes on a base to their roll colors when rolling over the base rootLock - (default false) do not let the root node (a node in the points array) be draggable or deletable grandChildren - (default true) do not let there be grandchildren - so there can only be the root nodes and their direct children dblclickTime - (default .5) time in seconds to capture a double click within (also see ZIM TIME constant) steps - (default null) pass in an array of [nodeNum, dropX, dropY] arrays to recreate the steps - see getSteps(), setSteps() and steps property this can be used to recreate a previously made set of connectors and connections note: the steps may also include a delete flag, and moveX and moveY values and a flag for single select (rather than default children select) style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS addNode(x, y, startNode, endNode, startLength, endLength) - add a node at x and y cannot add nodes in linear mode - see linear parameter addNode will not work with the dropArray parameter x - the x position of the node or provide a base (see Connectors points parameter) y - the y position of the node or provide base info (see Connectors points parameter) startNode - (default true) set to false to not drag from node endNode - (default true) set to false to not drop on node startLength - (default null) set line startLength - see Connectors line parameter (for corner or curve lineType) endLength - (default null) set line endLength - see Connectors line parameter (for corner or curve lineType) removeNode(node) - remove the node (and its children) removeConnectors() - removes all nodes and connectors except for root nodes which were specified in the points parameter selectNode(node, children) - select a node and its children unless children parameter is set to false makeConnection(node, x, y) - add a connection from a node to an x and y position getSteps(popup) - gets an array of [nodeNum, dropX, dropY] that are automatically recorded each connection. Also see the steps property. This can then copeied and passed into the steps parameter of Connectors() or the setSteps() method to recreate recorded connections allowing a set of connectors to be recreated. note: the steps may also include a delete flag, and moveX and moveY values and a flag for single select (rather than default children select). setSteps(steps) - add steps to a Connectors() object - or use the steps parameter - also applySteps() for backwards compatibility steps of [nodeNum, dropX, dropY] are automatically collected when nodes are made and stored in a steps array. The data for the steps can be collected with getSteps(popup) and shown in a popup window if desired. Then pass the steps in to the Connectors() step parameter or use setSteps(steps) to recreate the recorded Connectors. note: the steps may also include a delete flag, and moveX and moveY values and a flag for single select (rather than default children select). addBase(base, baseInfo) - add nodes to a base DisplayObject - see the points parameter for info about the baseInfo removeBase(base) - remove the connectors for a base - the base will still need to be removed with removeFrom() setAvailableIndexes(indexes) - set the provided index or array of indexes to be active clone() - makes a copy with properties such as x, y, etc. also copied dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String latestNode - reference to the latest node while being dragged or and dropped successfully creating a connection this is set to null if the dragged node is dropped and a connection is not made see all the properties added to the node objects to get for instance, a creator node targetNode - reference to a node on which the latestNode was dropped to successfully create a connection the latestNode will inherit the dropIndex and dropArray from the targetNode node - the DisplayObject used to make the connector nodes the node objects also have these added properties: creator - the node the node was created from (parent in hierarchy) or null if root node creatorLine - the line going back to the creator or null if root node creations - an array of nodes made from the node (its children in hiearchy) before - the node before it in the original points array (or null if first) after - the node after it in the original points array (or null if last) nodeColor - remembers the node color in case ZIM VEE is used for color so rolloff knows what color to set base - the base the node is associated with or null if no base selected - whether the node is selected or not orientation - the orientation of the lines from the node nodeNum - a unique index in order nodes are made this is used in steps to recreate nodes and connections with the Connectors steps parameter or setSteps(steps) method dropIndex - get or set the index of the point on which an original node is made this will get transfered from a targerNode dropArray - get or set the array of dropIndexes that this node can connect to this will get transfered from a targerNode and if the dropArray and the lineArray are the same and the duplicateLine is false then a "blocked" event is dispatched lineArray - get an array of indexes to other node connections this will get transfered to a targetNode and if the lineArray and dropArray are the same and the duplicateLine is false then a "blocked" event is dispatched line - the Line object used to make the connector lines the line objects also have these added properties: node - a reference to the node at the start of the line creatorNode - a reference to the node at the end of the line nodes - the Container that holds the nodes lines - the Container that holds the lines points - a read only array of points of node steps - an array of [nodeNum, dropX, dropY] arrays that can be used to recreate connections see also the getSteps(popup) method and the Connectors() steps parameter or setSteps(steps) method to recreate connections note: the steps may also include a delete flag, and moveX and moveY values. selectedList - a read-only array of selected nodes bases - an Array of DisplayObjects used as bases (provided through the points parameter or addBase()) the base objects also have these added properties and methods: connectors - an array of all connector nodes on the base connectorMoveEvent - reference to pressmove event on base connectorUpEvent - reference to pressmove event on base connectorOverEvent - reference to pressmove event on base connectorOutEvent - reference to pressmove event on base setConnectorColors(baseColor, baseBorderColor, nodeRollColor, nodeRollBorderColor) - method to set colors startNode - set to false to not start a line from this base - see points parameter endNode - set to false to not end a line on this base - see points parameter startLength - set a start length for the connector - see points parameter good to prevent corner and curved lines from overlapping endLength - set an end Length for the connector - see points parameter good to prevent corner and curved lines from overlapping ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS dispatches a "connection" event if a new node is made and lastNode property is set to the new node dispatches a "noconnection" event if the connector is dropped and no new node is made dispatches a "blocked" event of duplicateLine is false and continuous is true and there are no more connections available this will happen if the latestNode's dropArray is the same as its linesArray (the order in the array does not matter) dispatches a "complete" event in linear mode when the connections are complete ALSO see the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

Marquee(width, height, items, time, transition, speed, direction, marginLeft, marginRight, marqueeType, borderColor, borderWidth, refresh, mix, style, group, inherit)

Marquee zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION A display for ads and promos using an optional ZIM Indicator with pause button. The Marquee uses the ZIM Pages class to transition multiple items. The items can be interactive ZIM objects made ahead of time and passed into the items parameters Images can also be loaded with the load() method. See: https://zimjs.com/marquee.html for an example See: zim Carousel as well for a more simple object with arrows NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

   const promo1 = new Container(600, 200);
   new Rectangle(promo1.width, promo1.height, yellow).addTo(promo1);
   new Circle(30, red).center(promo1).drag();

   // could be more

   // optionally or alternatively, specify a Marquee object
   // there can be multiple image properties using end src as key
   // just use null as value if no URL
   const marqueeData = {"retina.jpg": ["https://zimjs.com/retina.html", "_blank"]};
   const marqueePath = "assets/";

   // create Marquee
   // note the actual width of marquee will be 25+25 more for added margins (optional)
   const marquee = new Marquee(600, 200, [promo1])
      .center()
      .load(marqueeData, marqueePath);

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) width - (default 300) width of marquee content final marquee width will have marginLeft and marginRight added to this width height - (default 100) height of content and marquee items - default(null) an array of Display Objects - can be interactive time - default(5) time interval in seconds for changing items (also see ZIM TIME constant) also see marqueeTime property for each item to individually override the time for viewing transition - default("slide") the transition between items options are: "none", "reveal", "slide", "fade", "clear", "black", "white", "fan" speed - default(.5) speed of transition in seconds (also see ZIM TIME constant) direction - default(RIGHT) location of next item relative to current item options are: RIGHT, LEFT, UP, DOWN marginLeft - default(25) width at left of content for Indicator and Pause button set to 0 to not show indicator and pause button marginRight - default(25) width at right of content for Z logo with animated MARQUEE set to 0 to not show Z logo with animated MARQUEE marqueeType - (default "dot" or "circle") the Indicator type - also "box" or "square" borderColor - (default dark) border color - any ZIM or HTML color - set to -1 for no border borderWidth - (default 1) width of border if borderColor - set to 0 for no border refresh - (default 30*60 seconds) page refresh to handle browser memory build mix - (default true) randomize content and then play in that order - different for each page load note: loaded files will always come after initial marquee items style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS add(obj, url, target) - add a Display Object (obj) - can be interactive content - returns obj for chaining can provide an overall url and target for url but often will provide navigation button, etc. as part of interactive content remove(obj) - remove an object from the marquee - returns obj for chaining will also call a dispose() method on the obj if there is one go(page) - transition to specific page (obj) or index - returns obj for chaining pause(state, immediate) - pause or unpause the Marquee - returns obj for chaining can be used by interactive code to pause Marquee when interacting immediate (default false) set to true to make the Marquee go to next item right away when unpausing (no effect when pausing) load(data, path) - Marquee object for images their optional action url and target: - returns obj for chaining data in format: {imageSrc:"actionURL", imageSrc:["actionURL", "target"], etc.} path: optional directory location such as a relative path: "assets/" clone() - makes a copy with properties such as x, y, etc. also copied dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String content - a reference to the ZIM Container that holds the content pages - a reference to the ZIM Pages object that holds the items use pages.pages to access an array of pages, etc. - see Pages Class button - a reference to the pause/play button if there is one indicator - a reference to the ZIM Indicator if there is one - see Indicator Class index - the selected index of the Marquee selected - the selected item of the Marquee lastSelected - the last selected item of the Marquee time - get or set the time of the marquee (between changing items) speed - get the speed of the transition paused - read only property as to whether the Marquee is paused - see pause() method interval - a reference to the ZIM interval left - a reference to the left Container right - a reference to the right Container if there is one icon - a reference to the Z icon if there is one label - a reference to the MARQUEE Label that pops out of the Z if there is one eg. label.visible = false to not show label popping out marqueeLoader - a reference to the ZIM loadAssets queue if load() is used Each item gets a marquee property that points to the ZIM marquee it is in Each item gets a marqueViews property recording how many times viewed Each item can have a marqueeTime property set to ms to customize its view time ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS dispatches a "page" event when item starts to change dispatches a "pagetransitioned" event when item finishes changing ALSO see the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

Carousel(items, viewNum, time, spacing, backgroundColor, backing, padding, paddingH, paddingV, arrowLeft, arrowRight, arrowGap, valign, ease, swipe, remember, index, continuous, selectedIndex, style, group, inherit)

Carousel zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION A horizontal display for multiple objects with arrows at sides to animate to previous and next. This is good for sliding banners, or sliding through a set of icons. Items will be tiled in a ZIM Tile with one row. It is expected that the items be the same width and height but if not, the items will have width set to the most common width and heights aligned vertically to the valign setting. Thank you Marva for the idea and original code! See: ZIM Marquee for a more complex alternate format with Indicator See: https://zimjs.com/zim/carousel.html for an example NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

   const items = [
      new Rectangle(400,80,red).tap(()=>{zog("red");}),
      new Rectangle(400,80,green).tap(()=>{zog("green");}),
      new Rectangle(400,80,blue).tap(()=>{zgo("https://zimjs.com","_blank");})
   ];
   new Carousel(items, 1).center();

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) items - default(seven multicolored rectangles) an array of Display Objects - can be interactive items will be scaled to the most common width and tiled - see the tile property a String item will be converted to a new Pic(item) viewNum - default(3) the number of items to show time - default(.2) time in seconds to animate between items (also see ZIM TIME constant) spacing - default(20) the space between the items backgroundColor - default(clear) the backgroundColor - also see background property backing - default(null) - an optional backing DisplayObject that goes on top of the backing and under the tile padding - default(0) - the default for the background outside the tile paddingH - default(padding) - the horizontal padding to override the padding setting paddingV - default(padding) - the vertical padding to override the padding setting arrowLeft - default(new Arrow().rot(180)) - an arrow for going left arrowRight - default(new Arrow()) - an arrow for going right arrowGap - default(20) the gap between the arrow and the backing valign - default(CENTER) the vertical alignment of the tile items ease - default(quadInOut) the ease of the animation - see ZIM animate() ease parameter for types swipe - default(true) set to false to not make the tile swipeable - see also the swipe property remember - default("zimCarousel") set to false to not remember the index when reloading the page index - default(0 or remembered index) the starting index - see also the index property this is the index of the first (left) item in view continuous - default(true) set to false to stop at ends this will clone the items and use the modulus to keep index numbers correct if continuous is false and the carousel is cycled then it will bounce back and forth selectedIndex - same as index, kept in for backwards compatibility in ZIM DUO style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS goRight(time) - go to the right - time defaults to Carousel time parameter but can be customized - returns object for chaining goLeft(time) - go to the left - time defaults to Carousel time parameter but can be customized - returns object for chaining cycle(cycleTime, transitionTime, repeat, repeatNum, recycle, rtl) - |ZIM VEE| cycle the carousel from the current index (see also remember) cycleTime (default 5) in seconds to animate to next item transitionTime (default 1) in seconds to animate between items - overrides Carousel time setting often a faster Carousel time is desired for pressing arrows or swiping but a slower transitionTime when cycling repeat (default true) continue past ends if carousel continuous is set or go back and forth from start to end if continuous is not set set to false to just go one once repeatNum (default 0) set to a number greater than 0 to limit repeats or bounces - returns object for chaining for bounce, use .5 for partial cycle for example, 1.5 will go forth then back then forth recycle (default cycleTime*2) time in seconds to restart cycle if cleared due to arrows or swipes set to false or -1 to not restart the cycle rtl (default DIR) if true will stop going back to 0 index if no repeat cycleClear() - stops the cycle disableArrows() - turn arrows off - returns object for chaining enableArrows() - turn arrows on - returns object for chaining clone() - makes a copy with properties such as x, y, etc. also copied dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String index - get or set the first index (left) of the viewable area items - reference to the original array of items tile - reference to the single-row tile that holds the items viewNum - get the number of items viewable itemWidth - get the calculated item width itemHeight - get the calculated maximum height spacing - get the spacing between the items arrowLeft - reference to the left arrow arrowRight - reference to the right arrow swipe - get or set whether the tile can be swiped repeatTotal - the number of repeats or bounce cycles swipeObj - reference to the ZIM Swipe object cycleInterval - reference to the cycle interval recycleEvent - reference to the recycle event recycleWait - reference to the recycle timeout background - reference to the background rectangle backing - reference to a provided backing continuous - get whether the carousel is continuous ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS dispatches a "page" event when starting an animation dispatches a "goleft" and a "goright" event when going left or right - just after the page event dispatches a "transitioned" event when item finishes changing dispatches a "bounced" event on each bounce dispatches a "bouncedone" event if the cycle bounceNum is set and the bounce is done dispatches a "cyclecleared" event if the cycle is set and stops due to arrow press or swipe ALSO see the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Loader(width, height, label, type, backgroundColor, rollBackgroundColor, color, rollColor, borderColor, borderWidth, corner, shadowColor, shadowBlur, hitPadding, gradient, gloss, dashed, backing, rollBacking, rollPersist, icon, rollIcon, toggle, toggleBacking, rollToggleBacking, toggleIcon, rollToggleIcon, toggleEvent, frame, multiple, accept, style, group, inherit)

Loader zim class - extends a zim.Button which extends a zim.Container DESCRIPTION Loader lets you upload images, text or JSON. These are available on the loaded event function. Loader uses the HTML input type=file tag and overlays this with a createjs DOMElement. Loader is a Button so can be displayed for the user to click on. It defaults to a dashed line region as you can also drag and drop files to the loader. You can also save an image using the save() method to a new browser window for the user to save NOTE due to the HTML tag being overlayed, the loader.resize() must be called if it is moved (This is called automatically when the stage is resized) NOTE if the loader is placed in a container and the container is removed or added again the loader must be manually removed or added again with loader.removeFrom() or loader.addTo(). This is so ZIM does not have to keep track of HTML tags each time a container is added or removed. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const loader = new Loader({
   label:"UPLOAD PIC OR DROP PICS HERE",
   width:700,
   height:400,
   corner:50
}).center();
loader.on("loaded", e=>{
   loop(e.bitmaps, bitmap=>{
      bitmap.centerReg().drag();
   });
   loader.removeFrom();
   S.update();
});

// and to later save for instance in a button event:
saveButton.on("click") {
   loader.save(stage); // or some other container... can specify crop bounds too
}

EXAMPLE

// loading a JSON file:
const loader = new Loader({
   type:"JSON",
   label:"UPLOAD JSON",
   width:700,
   height:400,
   corner:50
}).center();
// choose a test.json file with the following in it:
// {"test":"testing"}
loader.on("loaded", e=>{
   zog(e.json.test); // "testing"
   loader.removeFrom();
   S.update();
});

EXAMPLE

// save a json file
const obj = {a:[1,2,3], b:"hello"};
new Loader().save({content:obj, type:"json"}); // save a json file with obj

EXAMPLE

// save a text file
const textInput = new TextInput().center();
new Button({label:"SUBMIT", wait:"SAVED"}).center().mov(0,100).tap(()=>{
   new Loader().save({content:textInput.text, filename:"answer.txt", type:"text"});
});

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) width - (default 250) the width of the button height - (default 70) the height of the button label - (default "UPLOAD PIC") ZIM Label or plain text type - (default "image") set to "text" to receive text or "JSON" to receive a parsed JSON file and "other" for others like MP3 backgroundColor - (default "rgba(0,0,0,.05)") background color of button (any CSS color) rollBackgroundColor - (default "rgba(0,0,0,.1)") rollover color of button backbground color - (default "rgba(0,0,0,.5)") text color of button (any CSS color) rollColor - (default color) rollover text color of button borderColor - (default rgba(0,0,0,.3)) the color of the border borderWidth - (default 1) thickness of the border corner - (default 0) the round of the corner (set to 0 for no corner) can also be an array of [topLeft, topRight, bottomRight, bottomLeft] shadowColor - (default "rgba(0,0,0,.3)") set to -1 for no shadow shadowBlur - (default 14) how blurred the shadow is if the shadow is set hitPadding - (default 0) adds extra hit area to the button (good for mobile) gradient - (default 0) 0 to 1 (try .3) adds a gradient to the button gloss - (default 0) 0 to 1 (try .1) adds a gloss to the button backing - (default null) a Display object for the backing of the button (eg. Shape, Bitmap, Container, Sprite) see ZIM Pizzazz module for a fun set of Button Shapes like Boomerangs, Ovals, Lightning Bolts, etc. https://zimjs.com/bits/view/pizzazz.html rollBacking - (default null) a Display object for the backing of the rolled-on button rollPersist - (default false) set to true to keep rollover state when button is pressed even if rolling off icon - (default false) set to display object to add icon at the center of the button and remove label https://zimjs.com/bits/view/icons.html rollIcon - (default false) set to display object to show icon on rollover toggle - (default null) set to string to toggle with label or display object to toggle with icon or if no icon, the backing rollToggle - (default null) set to display object to toggle with rollIcon or rollBacking if no icon there is no rollToggle for a label - that is handled by rollColor on the label toggleEvent - (default mousedown for mobile and click for not mobile) what event causes the toggle dashed - (default true) set to false to turn off the dashed for the border frame - (default the zdf) a reference to the Frame (to scale and position the HTML tag) multiple - (default true) set to false to let user only upload one file rather than multiple files (with shift or ctrl) accept - (default null) set to extension / MIME-type to limit types of files the upload dialog will suggest here are some examples: "image/*" "image/jpeg, image/png" ".png, .jpeg, .jpg, .gif" "image/jpeg, .jpeg, .jpg" ".txt, .json, application/json" "audio/mpeg, .mp3" style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS resize() - call the resize event if the scale or position of the Loader is changed this will sync the location of the HTML input tag resize() is only needed if the scale or x, y of the Loader (or its container) is changed it is not needed for general window resizing - the Loader handles this Note: if the Frame itself changes location in the HTML document, call a F.update() this will then dispatch an update event to the Loader and it will resize() this is not needed if resizing the window or scrolling - see Frame update() method docs save(content, filename, x, y, width, height, cached, cachedBounds, type, data, quality) - save a picture or text (supports ZIM DUO) content - the Display object to be saved such as a Container, Bitmap, etc. or text (or Label, TextInput, TextArea) or JSON or object for JSON if text or json, then x, y, width, height, cached, cachedBounds, data, and quality are ignored filename - (default random) - the text name of the file (with or without extension - also see type) x, y, width, height - the cropping bounds on that object otherwise defaults to 0,0,W,H cached - (default false) set to true if the object is currently already cached cachedBounds - if you are saving a different bounds than was previously cached setting the bounds here (createjs.Rectangle) will restore the cache to the previous bounds type - (default "png") set to "jpeg" for jpeg or "txt", "text" or "json" json will convert the content to JSON if it is not already in JSON format data - (default false) set to true to save as base64 data otherwise save returns the object for chaining quality - (default .92) a number between 0 an 1 representing the quality of the saved image (jpeg) note, this parameter may be moved to before data in the next version of ZIM Button methods: setBacking(type, newBacking) - dynamically set any type of backing for button (if null removes backing for that type) Backing types are: "backing", "rollBacking", "toggleBacking", "rollToggleBacking", "waitBacking", "rollWaitBacking" note - all backing will have a pattern property if a pattern is set as a backing setIcon(type, newIcon) - dynamically set any type of icon for button (if null removes icon for that type) Icon types are: "icon", "rollIcon", "toggleIcon", "rollToggleIcon", "waitIcon", "rollWaitIcon" toggle(state) - forces a toggle of label if toggle param is string, else toggles icon if icon is set or otherwise toggles backing state defaults to null so just toggles pass in true to go to the toggled state and false to go to the original state hasProp(property as String) - returns true if property exists on object else returns false clone() - makes a copy with properties such as x, y, etc. also copied dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String tag - the HTML input tag of type file - used for uploading frame - get or set the frame - set this if changing frames Button properties: text - references the text property of the Label object of the button label - gives access to the label backgroundColor - get or set non-rolled on backing color (if no backing specified) rollBackgroundColor - get or set rolled on backing color color - get or set non-rolled on text color (if no icon specified) rollColor - get or set rolled on text color backing - references the backing of the button rollBacking - references the rollBacking (if set) icon - references the icon of the button (if set) rollIcon - references the rollIcon (if set) toggleObj - references the toggle object (string or display object if set) rollToggle - references the rollToggle (if set) toggled - true if button is in toggled state, false if button is in original state enabled - default is true - set to false to disable rollPersist - default is false - set to true to keep rollover state when button is pressed even if rolling off focus - get or set the focus property of the Button used for tabOrder ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. ACTIONEVENT This component is affected by the general ACTIONEVENT setting The default is "mousedown" - if set to something else the component will act on click (press) EVENTS loaded - is dispatched when the files(s) are uploaded - the event object comes with the following properties: FOR IMAGES (see types array) e.bitmaps - an array of Bitmap objects of the loaded images e.bitmap - the first Bitmap to be created from the loaded images e.lastBitmap - the last Bitmap to be created from the loaded images e.total - the total Bitmap objects to be created from the loaded images FOR TEXT (see types array) e.texts - an array of String objects of the loaded text files e.text - the first text loaded e.lastText - the last text loaded e.total - the total number of texts loaded FOR JSON (see types array) e.jsons - an array of JSON objects of the loaded JSON files e.json - the first JSON object loaded e.lastJSON - the last JSON object loaded e.total - the total number of JSON files loaded FOR OTHER (see types array) e.others - an array of other objects of loaded files e.other - the first other object loaded e.lastOther - the last other object loaded e.total - the total number of other files loaded ALSO see the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

TextArea(width, height, placeholder, text, size, padding, color, backgroundColor, borderColor, borderWidth, corner, shadowColor, shadowBlur, dashed, id, readOnly, spellCheck, password, inputType, wrap, maxLength, frame, expand, keyboardShift, style, group, inherit)

TextArea zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION TextArea creates an input text field by overlaying an HTML TextArea. The TextArea is then overlayed with the createjs DOMElement and scaled and positioned with ZIM code. This can also be used if selectable text is required Access to the HTML tag is provided with the TextArea tag property. So CSS Styles can be applied to the HTML tag as with any HTML textarea tag The TextArea comes with a ZIM Rectangle in behind that you can adjust with parameters or remove completely if you so desire using the TextArea background property ie. myTextArea.background.alpha=0; or myTextArea.removeChild(myTextArea.background) NOTE due to the HTML tag being overlayed, the TextArea.resize() must be called if it is moved (This is called automatically when the stage is resized) It also means that a TextArea in a Window or List is probably not a good thing. Consider using Label and then toggling a TextArea on mouseover and mouseout. See https://zimjs.com/snips for an older discontinued example. NOTE if the TextArea is placed in a container and the container is removed or added again the textArea must be manually removed or added again with textArea.removeFrom() or textArea.addTo(). This is so ZIM does not have to keep track of HTML tags each time a container is added or removed. When using TextArea in a Pane or in Pages this will be automatically handled only if the TextArea is directly in the Pane or the page (not nested in further Containers) NOTE rotation and skewing of TextArea is not supported - although might work with custom CSS transformations NOTE because of these limitations, consider the TextEditor as a solution. The TextEditor allows you to use a Label which is a proper part of the Canvas and then change the label with a pop-up editor that includes a TextArea. SEE: https://zimjs.com/cat/texteditor.html NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const textArea = new TextArea(300, 200).center();

const label = new Label({text:""}).pos(20,20);
textArea.on("input", ()=>{
   label.text = textArea.text;
   S.update();
});

// to set scrollBars on TextArea use CSS on the TextArea tag property:
textArea.tag.style.overflow = "auto"; // etc.

// if manually scaled or positioned (or container is scaled or positioned)
// then the TextArea must be resized with the resize method
textArea.sca(.5).mov(200);
textArea.resize();

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) width - (default 250) the width of the TextArea backing (the textarea field will be that less the padding*2) height - (default 70) the height of the TextArea backing (the textarea field will be that less the padding*2) Note: to set scrollBars use CSS: textArea.tag.style.overflow = "auto"; placeholder - (default null) the HTML placeholder for the TextArea text - (default null) the text of the TextArea - see also the text property size - (default 20) a Number for the font-size of the TextArea (do not use px on the end) to change the font, use CSS on the tag property: textArea.tag.style.fontFamily = "courier"; padding - (default 5) the pixels between the backing border and the HTML textarea color - (default granite) text color (any CSS color) backgroundColor - (default "rgba(256,256,256,.1)") background color of box borderColor - (default rgba(0,0,0,.1)) the color of the border borderWidth - (default 1) thickness of the border corner - (default 0) the round of the corner (set to 0 for no corner) can also be an array of [topLeft, topRight, bottomRight, bottomLeft] shadowColor - (default null) the shadow color (css color) of a drop shadow shadowBlur - (default null) pixels of how blurred the shadow is if the shadow is set - eg. 10 dashed - (default true) set to false to turn off the dashed for the border id - (default null) a string id for the HTML textarea tag for CSS styling, etc. placeholder - (default null) a string that is used for the HTML textarea tag placeholder parameter readOnly - (default false) set to true to make TextArea read only (still selectable) spellCheck - (default true) set to false to turn Browser spell check off password - (default false) set to true to turn the field into a password field - single line only (uses input field type=password and not TextArea) inputType - (default false) set to "text" to show a text input (one line) - or try other HTML input types - "email", "number", etc. the various types of HTML inputs are not really tested - would suggest using Tag() instead for these (or preferably ZIM components) wrap - (default true) set to false to stop the textarea from wrapping (css white-space:pre) maxLength - (default null) set to a number to limit the number of characters in the textarea frame - (default the zdf) a reference to the Frame (to scale and position the HTML tag) expand - (default 20) hit area around background to count as a press on TextArea - handy for dragging as HTML tag area will override mouse on canvas keyboardShift - (default false) set to true to lift stage at least 1/4 height or up to textArea y/2 to raise textArea above keyboard style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS setFocus(type) - sets the focus of the TextArea tag (thanks Armin for the prompting) type is a Boolean that defaults to true - set to false to make the TextArea blur (loose focus) might need timeout 100ms before setting see also focus property resize() - call the resize method if the scale or position of the TextArea is changed this will sync the location of the HTML textarea tag resize() is only needed if the scale or x, y of the TextArea (or its container) is changed it is not needed for general window resizing - the TextArea handles this Note: if the Frame itself changes location in the HTML document, call a F.update() this will then dispatch an update event to the TextArea and it will resize() this is not needed if resizing the window or scrolling - see Frame update() method docs hasProp(property as String) - returns true if property exists on object else returns false clone() - makes a copy with properties such as x, y, etc. also copied dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String value - get or set the text content of the TextArea text - get or set the text value focus - get or set if the TextArea tag has focus or use setFocus() to set (might need timeout 100ms before setting) readOnly - set to true to not be able to edit or to false to be able to edit (always can select) maxLength - get or set the maximum number of characters typed - will not truncate existing characters until typed tag - the HTML textarea tag - just a regular HMTL form tag which can be styled background - access to the Rectangle() used for the background you can remove this with yourTextArea.background.removeFrom(yourTextArea); or adjust it dynamically with any of the Rectangle properties like color blendMode - how the object blends with what is underneath - such as "difference", "multiply", etc. same as CreateJS compositeOperation keyFocus - get or set the keyboard focus on the component - see also zim.KEYFOCUS will be set to true if this component is the first made or component is the last to be used frame - get or set the frame - set this if changing frames ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS focus, blur are dispatched when the text area gains and loses focus input is dispatched when the text area is typed or pasted into capture the event object data property to see what letter is typed change is dispatched when the text area is different after losing focus These are just the html events passed on through - note the difference between input and change! ALSO see the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

obj.cache(width||x, height||y, null||width, null||height, scale, options, margin)

cache zim DisplayObject method overrides CreateJS cache() method with more flexible parameters https://createjs.com/docs/easeljs/classes/Container.html#method_cache DESCRIPTION Turns the object into a bitmap which can be rendered more efficiently, especially on mobile. Caching may blur the object slightly, most noticable when caching a Label. Every stage update must re-render objects on the stage. This can be processor intensive for lots of vectors - such as Labels and Shapes. Generally, we can build without caching but if better performance is needed, then caching may help. A cached object can be transformed (scale, rotation, position, skew, alpha) but if the object inside changes, for instance if the text changes, then updateCache() will need to be called. Constantly calling updateCache() for instance, an animated blob, will not help performance. A handy trick is to cache an object before animating and uncaching it after animating this can improve animation performance and the slight blur of the object is not noticed during animation. ALSO SEE: updateCache() and uncache() EXAMPLE

const circle = new Circle(50, red).cache().center();

timeout(1, ()=>{
   circle.alpha = .5; // cache does not have to be updated to see alpha change
   S.update();
});

timeout(2, ()=>{
   circle.color = blue;
   circle.updateCache(); // cache must be updated to see color change
   S.update();
});

EXAMPLE

// cache text as it is animated
new Label("Cached Text")
   .cache() // cache the text so animation is smoother
   .alp(0)
   .center()
   .animate({
      props:{alpha:1},
      time:2,
      call:target=>{
         target.uncache(); // uncache the label so it is crisper looking
      }
});

PARAMETERS supports DUO - parameters or single object with properties below ** cache dimensions will be set to the bounds of the object if the first two or four parameters are not provided width||x - (default getBounds().x) the width of the chache - or the x if first four parameters are provided height||y - (default getBounds().y) the height of the chache - or the y if first four parameters are provided width - (default getBounds().width) the width of the chache - or null if first two parameters are provided height - (default getBounds().height) the height of the chache - or null if first two parameters are provided scale - (default 1) set to 2 to cache with twice the fidelity if later scaling up options - (default null) additional parameters for cache logic - see CreateJS somewhere for details also added adjustBounds property for options - set to true to set new bounds and registration point on cached objects with x,y,width,height different than the original this appears to NOT be the default with createjs cache() which keeps the original registration point and bounds automatically fixing this changes lots of things so use the adjustBounds option when needed for instance when caching parts of a container and requiring hit tests or the part to be draggable, etc. margin - (default 0) add or subtract a margin from the bounds eg. margin:10 will make the cache size 10 pixels more on all sides this can be handy when caching objects with borders - that go half outside the natural bounds RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.updateCache(blendMode)

updateCache CreateJS method https://createjs.com/docs/easeljs/classes/Container.html#method_updateCache DESCRIPTION Updates the cache when there is a chache otherwise gives an error. ALSO SEE: cache() and uncache() EXAMPLE

const circle = new Circle(50, red).cache().center();

timeout(1, ()=>{
   circle.alpha = .5; // cache does not have to be updated to see alpha change
   S.update();
});

timeout(2, ()=>{
   circle.color = blue;
   circle.updateCache(); // cache must be updated to see color change
   S.update();
});

PARAMETERS blendMode - (default null) a blendMode (compositeOperation) see ble() if a blendMode is provided the previous cache is not deleted as the new cache is drawn RETURNS null CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.uncache()

uncache zim DisplayObject method overrides CreateJS cache() to return object for chaining https://createjs.com/docs/easeljs/classes/Container.html#method_uncache DESCRIPTION Clears the cache. ALSO SEE: cache() and updateCache() EXAMPLE

// cache text as it is animated then uncache
new Label("Cached Text")
   .cache() // cache the text so animation is smoother
   .alp(0)
   .center()
   .animate({
      props:{alpha:1},
      time:2,
      call:target=>{
         target.uncache(); // uncache the label so it is crisper looking
      }
});

RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.on(type, listener, scope, once, data, useCapture)

on CreateJS method https://createjs.com/docs/easeljs/classes/Container.html#method_on DESCRIPTION Captures events. Similar to addEventListener() in raw JavaScript but is shorter to write and has a few extra features. Generally, events are when interactivity occurs or ZIM has a message. Here are some types: "click", "dblclick", "mousedown/pressdown", "pressmove", "pressup", "mousemove", "stagemousemove", "mouseover", "mouseout" "ready", "complete", "change", "keydown", "keyup" The events available for ZIM Objects are listed at the bottom of their Doc entry. Events can also be turned off in a couple ways - see the examples. To turn the event off the return value of the on() method is used so DO NOT CHAIN THE ON METHOD ALSO SEE: off() and tap(), change(), movement(), hov(), hold() EXAMPLE

// BASIC EVENT
const button = new Button().center();
// the type of event as a string and the function to call
// here we use an arrow function
button.on("click", ()=>{
   zgo("https://zimjs.com", "_blank");
});

// alternatively, using an anonymous function
button.on("click", function() {
   zgo("https://zimjs.com", "_blank");
});

// alternatively, using a named function
// do not put () after the function name
// that would call the function right away which is not desired
// we want to tell the on() method which function to run when the event happens
button.on("click", doClick);
function doClick() {
   zgo("https://zimjs.com", "_blank");
}

EXAMPLE

// EVENT OBJECT
const tile = new Tile(new Rectangle(), 5, 5, 2, 2).center();
tile.on("mousedown", e=>{ // collect the event object in parameter e
   // e.target is the object that caused the event (one of the rectangles)
   e.target.alpha = 0;
   // e.currentTarget is the object on which the event is placed (the tile)
   e.target.mov(5);
   // do not forget to update stage in events if needed!
   S.update();
});

EXAMPLE

// REMOVING EVENT
let keyEvent = F.on("keydown", e=>{
   zog(e.keyCode); // will tell code for key pressed
   // etc.
});
timeout(2, ()=>{ // time in seconds as of ZIM Cat
   // remove the keyEvent
   F.off("keydown", keyEvent);
});

// RE-ADDING EVENT
timeout(4, ()=>{
   // add the keyEvent back again
   // note - the event must be re-assigned to use again
   // this leads to a tricky bug if not careful!
   keyEvent = F.on("keydown", keyEvent);
});
timeout(6, ()=>{
   // remove the keyEvent again
   // this only works if we re-assigned the latest event to keyEvent
   // which is why we used let rather than const
   F.off("keydown", keyEvent);
});

EXAMPLE

// ONE EVENT CALL
// call this function only once when mousing over the stage
// note: "mousemove" would only trigger if moving over an object on the stage
S.on("stagemousemove", ()=>{
   pauseAnimate(false); // unpause all animations
}, null, true); // this true means remove the event after calling it once

// REMOVE METHOD
// a remove() method is available on the event object
const circle = new Circle().center();
circle.on("mouseover", e=>{
   circle.alpha -= .1;
   if (circle.alpha <= .5) e.remove();
   S.update();
});

PARAMETERS type - the type of event as a string - this depends on the object on which the event is being placed here are some common events - see the EVENTS section of the specific object for more "click", "dblclick", "mousedown/pressdown", "pressmove", "pressup", "mousemove", "stagemousemove", "mouseover", "mouseout" "ready", "complete", "change", "keydown", "keyup" listener - the function to call when the event happens this is often an arrow function or an anonymous function but can be a named function the function will receive an event object as its parameter often collected as e see https://createjs.com/docs/easeljs/classes/MouseEvent.html for properties, etc. common event object properties are: target (what caused the event), currentTarget (what the event was placed on) keyCode (for key events) often used as e.target, e.currentTarget, e.keyCode scope - (optional) the scope to execute the listener in. Defaults to the dispatcher/currentTarget for function listeners, and to the listener itself for object listeners (ie. using handleEvent). once - (default false) set to true to remove the listener after the first event call data - (default null) arbitrary data that will be included as the second parameter when the listener is called. useCapture - (default false) for events that bubble, indicates whether to listen for the event in the capture or bubbling/target phase RETURNS a reference to use as the second parameter of the off() method to turn the event off (SO DO NOT CHAIN THE ON METHOD) CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.off(type, listener, useCapture)

off CreateJS method https://createjs.com/docs/easeljs/classes/Container.html#method_off DESCRIPTION Turns an event off using the return value of the on() method. ALSO SEE: on() EXAMPLE

// REMOVING EVENT
let keyEvent = F.on("keydown", e=>{
   zog(e.keyCode); // will tell code for key pressed
   // etc.
});
timeout(2, ()=>{ // time in seconds as of ZIM Cat
   // remove the keyEvent
   F.off("keydown", keyEvent);
});

// RE-ADDING EVENT
timeout(4, ()=>{
   // add the keyEvent back again
   // note - the event must be re-assigned to use again
   // this leads to a tricky bug if not careful!
   keyEvent = F.on("keydown", keyEvent);
});
timeout(6, ()=>{
   // remove the keyEvent again
   // this only works if we re-assigned the latest event to keyEvent
   // which is why we used let rather than const
   F.off("keydown", keyEvent);
});

PARAMETERS type - the string type of the event used in on() listener - the listener function or object used in on() useCapture - (default false) the setting for the capture or bubbling/target phase used in on() RETURNS null CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.removeAllEventListeners(type)

removeAllEventListeners CreateJS method https://createjs.com/docs/easeljs/classes/Container.html#method_removeAllEventListeners DESCRIPTION Removes all event listeners or all event listeners of a certain type ALSO SEE: on() and off() EXAMPLE

// REMOVING EVENT
rect.removeAllEventListeners(); // remove all
holder.removeAllEventListeners("click"); // remove all click listeners

PARAMETERS type - the string type of the event used in on() RETURNS null CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.getBounds()

getBounds CreateJS method https://createjs.com/docs/easeljs/classes/Container.html#method_getBounds DESCRIPTION Gets bounds data for a Display Object (with bounds set). This will have x, y, width and height properties. Imagine the bounds as an invisible rectangle around the object. The bounds are what dictate the width and height of an object (along with scale). The bounds will affect how an object is positioned with pos(). The bounds also may affect certain types of hitTests. Most ZIM DisplayObjects have their bounds set automatically. Shape() however does not have its bounds set automatically. ALSO SEE: setBounds() EXAMPLE

const rect = new Rectangle(100, 100, blue).center();
zog(rect.getBounds()); // {x:0, y:0, width:100, height:100}

const circle = new Circle(100, red).center(); // 100 is the radius
zog(circle.getBounds()); // {x:-100,y:-100,width:200,height:200}
// note that a Circle has its origin (0,0) in the middle
// so half the bounds goes to the left and above
// and the width and height are twice the radius

// Also note that the registration point is completely independent from the bounds
// and independent from the origin.  See https://codepen.io/zimjs/pen/qBEjYZV

RETURNS object with x, y, width and height properties CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.setBounds(width||x||Boundary, height||y, null||width, null||height)

setBounds zim DisplayObject method overrides CreateJS setBounds() method with more flexible parameters https://createjs.com/docs/easeljs/classes/Container.html#method_setBounds DESCRIPTION Sets bounds for a Display Object. Imagine the bounds as an invisible rectangle around the object. The bounds are what dictate the width and height of an object (along with scale). The bounds will affect how an object is positioned with pos(). The bounds also may affect certain types of hitTests. Most ZIM DisplayObjects have their bounds set automatically. Shape() however does not have its bounds set automatically. The setBounds() method will override any automatic bounds. ALSO SEE: getBounds() EXAMPLE

new Shape().f(red).dr(0,0,100,100).setBounds(100,100).center();
// without bounds set on the shape, it would not center properly

EXAMPLE

// Containers have two options for how bounds are determined
// 1. the size can be passed in to start in which case these bounds will remain unchanged
// 2. or no size can be passed in which means the bounds will grow to the contents
// setting bounds to null will convert a type 1 container into a type 2 container
const holder = new Container(100,100).center();
new Rectangle(200,200).addTo(holder);
// currently the bounds are {x:0,y:0,width:100,height:100}
holder.setBounds(null);
// now the bounds are {x:0,y:0,width:200,height:200}
new Rectangle(300,300).addTo(holder);
// now the bounds are {x:0,y:0,width:300,height:300}
holder.setBounds(100,100);
// now the bounds are back to {x:0,y:0,width:100,height:100}
// this example just demonstrates it would not be very practical

PARAMETERS width||x||Boundary - (default null) the width of the bounds - or the x if four parameters are provided or a ZIM Boundary Object {x,y,width,height} - same as CreateJS Rectangle height||y - (default width) the height of the bounds - or the y if four parameters are provided width - (default null) the width of the bounds - or null if only the first two parameters are provided height - (default null) the height of the bounds - or null if only the first two parameters are provided RETURNS the object for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.localToGlobal(x, y)

localToGlobal zim DisplayObject method overrides CreateJS localToGlobal() method with adjustment for scaled stage due to retina pixel density https://createjs.com/docs/easeljs/classes/Container.html#method_localToGlobal DESCRIPTION Returns a point on the stage for the provided x and y within the object's (container's) coordinate system. BACKGROUND Each container has its own x and y coordinate system. The stage is said to be the global coordinate system. Since containers may be located at different x and y positions and nested inside one another and scaled, rotated or skewed, finding the matching x and y position within different coordinates can be tricky to calculate. Traditionally in Interactive Media, three methods have been provided to translate x and y between coordinate systems. localToGlobal() finds the global x and y of a specified x and y inside the container object globalToLocal() finds the x and y inside the container object of a specified global x and y localToLocal() finds the x and y inside an other specified container of a specified x an y inside the container object SEE: https://zimjs.com/editor/view/Z_N5E7Z ALSO SEE: globalToLocal() and localToLocal() EXAMPLE

const holder = new Container(400,400).loc(100,100);
const circle = new Circle.center(holder);
zog(holder.localToGlobal(circle.x, circle.y)); // {x:300, y:300}
// Note: and easier way providing the same result is:
zog(circle.localToGlobal(0,0)); // {x:300, y:300}

PARAMETERS x - (default null) the x position inside the container y - (default null) the y position inside the container RETURNS a Point with x and y properties on the stage (global) that match the provide x and y inside the container CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.globalToLocal(x, y)

globalToLocal zim DisplayObject method overrides CreateJS globalToLocal() method with adjustment for scaled stage due to retina pixel density https://createjs.com/docs/easeljs/classes/Container.html#method_globalToLocal DESCRIPTION Returns a point within the object's (container's) coordinate system that matches the provided x and y on the stage (global). BACKGROUND Each container has its own x and y coordinate system. The stage is said to be the global coordinate system. Since containers may be located at different x and y positions and nested inside one another and scaled, rotated or skewed, finding the matching x and y position within different coordinates can be tricky to calculate. Traditionally in Interactive Media, three methods have been provided to translate x and y between coordinate systems. localToGlobal() finds the global x and y of a specified x and y inside the container object globalToLocal() finds the x and y inside the container object of a specified global x and y localToLocal() finds the x and y inside an other specified container of a specified x an y inside the container object SEE: https://zimjs.com/editor/view/Z_N5E7Z ALSO SEE: localToGlobal() and localToLocal() EXAMPLE

const rect = new Rectangle(500,500,red).center();
const circle = new Circle(20,purple).center(rect).noMouse(); // noMouse so movement turns off when outside rect
rect.movement(()=>{
   circle.loc(rect.globalToLocal(F.mouseX, F.mouseY)); // convert global mouse to x and y point within rect container
   S.update();
});
// Note: see Frame cursors property to do this more easily and precisely

PARAMETERS x - (default null) the x position inside the container y - (default null) the y position inside the container RETURNS a Point with x and y properties inside the container that match the provided x and y points on the stage (global) CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.localToLocal(x, y, target)

localToLocal zim DisplayObject method overrides CreateJS localToLocal() method with adjustment for scaled stage due to retina pixel density https://createjs.com/docs/easeljs/classes/Container.html#method_localToLocal DESCRIPTION Returns a point with x and y positions inside the provided target container's coordinate system that match the x and y within the object's (container's) coordinate system. BACKGROUND Each container has its own x and y coordinate system. The stage is said to be the global coordinate system. Since containers may be located at different x and y positions and nested inside one another and scaled, rotated or skewed, finding the matching x and y position within different coordinates can be tricky to calculate. Traditionally in Interactive Media, three methods have been provided to translate x and y between coordinate systems. SEE: https://zimjs.com/editor/view/Z_N5E7Z localToGlobal() finds the global x and y of a specified x and y inside the container object globalToLocal() finds the x and y inside the container object of a specified global x and y localToLocal() finds the x and y inside an other specified container of a specified x an y inside the container object ALSO SEE: globalToLocal() and localToLocal() EXAMPLE

const wheel = new Circle(300, blue).center().animate({props:{rotation:360}, time:5, loop:true, ease:"linear"});
const level = new Circle(20).loc(0,250,wheel); // will spin around with wheel
const land = new Container(800,800).center();
const player = new Circle(50,purple).center(land).drag(land);
Ticker.add(()=>{
   if (player.y < level.localToLocal(0,0,land).y) player.color = red; // if player goes below level
   else player.color = purple; // player is above level
});

PARAMETERS x - (default null) the x position inside the container y - (default null) the y position inside the container target - (default null) the target container in which to match the provided x and y positions RETURNS a Point with x and y properties in the target container that match the provide x and y inside the object container CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.clone(exact)

clone zim DisplayObject method overrides CreateJS cache() https://createjs.com/docs/easeljs/classes/Container.html#method_clone DESCRIPTION Makes a copy of the DisplayObject (and children). The clone() method is particularily handy for making multiple assets from a single asset() Although new Pic() instead of asset() is automatically cloned to give a new object each new Pic() ALSO SEE: duplicate() to duplicate custom properties as well EXAMPLE

const circle = new Circle(100, red).center();
circle2 = circle.clone().pos(100,100,RIGHT,BOTTOM); // make a copy and position at bottom right

EXAMPLE

asset("pic.jpg").center();
asset("pic.jpg").pos(100,100,RIGHT,BOTTOM); // will just move the existing asset to the corner
asset("pic.jpg").clone().pos(100,100,RIGHT,TOP); // will add a copy of the asset at the top
new Pic("pic.jpg").pos(0,100,CENTER); // no need to clone() a new Pic()

PARAMETERS exact (default false) ZIM VEE (Pick) values are active in clones unless exact is set to true For instance, if a Container holds a new Circle(20,[blue,green]) then its clone might be blue or green If exact is set to true then the clone will be whatever color was picked for the original circle RETURNS the object for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.dispose(disposing)

dispose zim DisplayObject method DESCRIPTION Deletes the DisplayObject from memory. This means it removes event listeners, stops animations, drags, gestures, transforms, etc. The references to the DisplayObject must still be set to null for proper garbage collection. Objects that have references to them may still be saved in memory and this can lead to memory leaks if many objects are being made. The average DisplayObject added to the stage and removed does not really need to be disposed() Only when hundreds or thousands of objects are being made will there be need for dispose() SEE: https://www.youtube.com/watch?v=aTnNicsLP3A // on memory management EXAMPLE

const tile = new Tile(new Pic("pic.jpg"), 100, 100).center();
const tilesArray = [tile]; // if we had an array of such tiles
const tilesObject = {fave:tile}; // if we had a reference in an object literal
timeout(10, ()=>{
   tile.dispose(); // will recursively dispose all children in Tile (the Bitmaps)
   tile = null; // remove the reference to tile
   tilesArray[0] = null; // set the array reference to null
   delete tilesObject.fave; // delete the property in the object literal
   S.update();
});

PARAMETERS disposing - (default null) pass in true to indicate already started dispose if calling dispose() on the super class from a custom class otherwise infinite looping can occur (used internally by ZIM) RETURNS the object for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.addTo(container, index, still)

addTo zim DisplayObject method DESCRIPTION A wrapper function for addChild() / addChildAt() to add the obj to the container. This allows us to chain more effectively: var circle = new Circle().addTo(stage).drag(); Also, ZIM has obj.center(container) and obj.centerReg(container) functions where the obj comes first followed by the container. So it is a pain to flip things and use container.addChild(obj) Now, we can use obj.addTo(container) and the object we are adding comes first. The index parameter is similar to an addChildAt() We can also use obj.removeFrom() to automatically remove from the container EXAMPLE

const circle = new Circle(50, red);
circle.addTo(stage); // or just circle.addTo(); // for the default frame's stage
// with chaining - and dragging:
var circle = new Circle(50, red).addTo().drag();

const rect = new Rectangle(100, 100, blue);
rect.addTo(stage, 0); // place on bottom

EXAMPLE

// Changing Coordinates
// An object may appear to change positions
// when you add from one container to another (the stage is a container too).
// This happens because the x and y origin inside the containers may be at different places
// yet the x and y property of the object remains unchanged.
// The "still" parameter converts between the coordinates and updates the x and y
// so that the object does not appear to jump - this defaults to true

const container = new Container().pos(100,100);
const rectangle = new Rectangle(200, 200, yellow).addTo(container);
// we want to drag the container and the circle
// but when the circle is in the container we want to drag the circle independently
// this leads to a tricky situation that can be solved as follows:
rectangle.on("mousedown", function() {container.drag({currentTarget:true});});
rectangle.on("pressup", function() {container.noDrag();});

const circle = new Circle(50, blue).center().drag();
// check to see if the circle is over the container and if so then add the circle
// try settin the third parameter to false to see what would normally happen
circle.on("pressup", ()=>{
   if (rectangle.hitTestReg(circle)) { // do not hitTest the container!
      circle.addTo(container); // keep position with default true as third parameter
   } else {
      circle.addTo(stage);
   }
   S.update();
});

PARAMETERS supports DUO - parameters or single object with properties below container - (default first frame's stage) the container to add to index - (default null) if provided will addChildAt the object at the index (0 being bottom) still - (default true or false if no parent) makes object not move when added from one coordinate space to another this also may change the objects x and y properties - set to false not to do this uses localToLocal() to accomplish this the still parameter is ignored if object currently does not have a parent RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

obj.removeFrom(container)

removeFrom zim DisplayObject method DESCRIPTION A chainable wrapper function for removeChild() that removes the obj from the container Matches obj.addTo(container) We have obj.removeFrom(container) NOTE do not need to specify container as removeFrom() will remove the object from its parent. EXAMPLE

const circle = new Circle(50, red);
circle.addTo(); // adds to stage
// later
circle.removeFrom(); // same as circle.removeFrom(stage)

PARAMETERS container - (default the object's parent) the container to remove the object from RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤BITS

CLOSE ▲

obj.added(call, interval, maxTime)

added zim DisplayObject method DESCRIPTION Calls callback function when object is added to the stage CreateJS has an "added" event that triggers when an object is added to another container but this container may not be on the stage. added polls several times quickly and then every 100ms to see if the object has a stage property Once it does then it calls the callback and removes the interval EXAMPLE

const circle = new Circle(50, red);
circle.added(()=>{zog("has stage");});

PARAMETERS callback - the function to call when added - will call right away if object is already added call will receive a reference to the stage and the object as parameters ** these two parameters are depricated as added no longer uses an interval as of ZIM Cat 03 patch ** but rather uses the "added" event and then checks to make sure it was the stage container the target was added to interval - (default .1) time in seconds to check (also see ZIM TIME constant) keeps repeating until stage is there or maxTime is reached maxTime - (default null) time in seconds to keep checking or forever if not provided RETURNS id of interval so clearInterval(id) will stop added() from checking for stage CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.centerReg(container, index, add)

centerReg zim DisplayObject method DESCRIPTION Centers the registration point on the bounds - obj must have bounds set. Will default to adding the object to the container. If no container parameter is provided and the object is in a container, centerReg will center the object in the current container. Thanks Bracer Jack for the suggestion. If no container and the object is not in a container, centerReg will center the object on the default frame's stage. A convenience function for setting both registration points at once. Also see center() for centering without changing the registration point. Also see reg(CENTER) for the same effect but without adding to container SEE: https://zimjs.com/positioning EXAMPLE

const rect = new Rectangle(100, 100, blue)
   .centerReg() // centers registration, centers and adds to stage
   .animate({obj:{rotation:360}, time:1, ease:"linear", loop:true});

// To just center the registration and not add it to a container
// use rect.centerReg(null, null, false);
// This is different than in the past where leaving out parameters would just center the registration
// The change is to match the default behaviour of addTo() and center() to add to stage without parameters

PARAMETERS supports DUO - parameters or single object with properties below container - (default object's parent or if none, the first frame's stage) centers the object on and adds to the container index - (default null) if provided will addChildAt the object at the index (0 being bottom) will be ignored if the add parameter is false add - (default true) set to false to only center the object's registration setting to false will not remove the object if already added to a container RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

obj.center(container, index, add)

center zim DisplayObject method DESCRIPTION Centers the object on the container. Will default to adding the object to the container. If no container parameter is provided and the object is in a container, center will center the object in the current container. Thanks Bracer Jack for the suggestion. If no container and the object is not in a container, center will center the object on the default frame's stage. Also see centerReg() for centering registration point at same time. SEE: https://zimjs.com/positioning EXAMPLE

var rect = new Rectangle(100, 100, blue)
   .center()    // centers and adds to stage
            // the below animation will be around the registration point at the top left corner
            // this is usually not desired - see centerReg() when rotating and scaling
   .animate({obj:{rotation:360}, time:1, ease:"linear", loop:true});

PARAMETERS supports DUO - parameters or single object with properties below container - (default object's parent or if none, the first frame's stage) centers the object on and adds to the container index - (default null) if provided will addChildAt the object at the index (0 being bottom) will be ignored if the add parameter is false add - (default true) set to false to only center and not add the object to the container setting to false will not remove the object if already added to a container RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

obj.place(id)

place zim DisplayObject method DESCRIPTION Sets the object to drag and logs to the console the x and y. Also can use keyboard arrows for moving 1 pixel and SHIFT keyboard arrows for moving 10 pixels. This is for when building you can move an object around to position it then when positioned, look at the console for the positioning code. In your code, set the reported x and y and delete the place call. EXAMPLE

circle.place("circle"); // lets you drag circle around - then see console

PARAMETERS id - (default null) the name of the object so that the log gives you complete code RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

obj.placeReg(id)

placeReg zim DisplayObject method DESCRIPTION Gives draggable indicator to position a registration point in an object This is for when building and when positioned, look at the console for registration code and delete the placeReg call. EXAMPLE

myContainer.placeReg("myContainer"); // lets you drag an indicator around - then see console

PARAMETERS id - (default null) the name of the object so that the log gives you complete code RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.pos(x, y, horizontal, vertical, container, index, add, reg, regX, regY)

pos zim DisplayObject method DESCRIPTION Chainable convenience function to position an object and optionally add to a container pos() provides easy positioning around the edges of a container. pos() has gone through three versions: VERSION 1 - positioned the registration point and has been replaced with loc() VERSION 2 - positioned left, right top or bottom with right and bottom being specified with boolean true VERSION 3 - positions left, right, center, top and bottom with ZIM positioning constants pos() positions objects from the edges of the container or on the stage if no container provided This defaults to the left of the object from the left and the top of the object from the top If the horizontal parameter is set to RIGHT it will position the right of the object from the right of the container If the vertical parameter is set to BOTTOM it will position the bottom of the object from the bottom of the container If CENTER is provided, it centers the object on the axis and then moves it the x or y provided Setting reg (or regX, regY) to true will position to the registration point - also see POSREG constant SEE: https://zimjs.com/positioning EXAMPLE

// 1. adds circle to default stage moves left and top of circle to 100, 100
circle1.pos(100, 100);

// 2. adds circle to box and positions right and bottom of circle 100 and 200
// from right and bottom of box bounds
circle2.pos(100, 200, RIGHT, BOTTOM, box)
// or
circle2.pos(100, 200, RIGHT, "bottom", box)
// or
circle2.pos(100, 200, true, true, box);

// 3. centers the circle in x and moves 100 and places circle 200 from bottom
circle3.pos(100, 200, CENTER, BOTTOM);

// 4. adds to stage and puts registration point at x=200 and y=0
circle4.pos({x:200, reg:true});

// 5. adds to stage and puts registration point at x=200 and y=radius (not y=0)
circle5.pos({x:200, regX:true});

PARAMETERS supports DUO - parameters or single object with properties below x - (default null or 0 for right) the x distance in the container to the left or right side of the object which side, depends on the right parameter if reg or regX is true then it is the distance to the registration point not the side y - (default null or 0 for bottom) the y distance in the container to the top or bottom of the object which one, depends on the bottom parameter if reg or regY is true then it is the distance to the registration point not the top or bottom horizontal - (default LEFT) LEFT will position the left side to the left side of the container bounds set to RIGHT to postion the right side from the right of the container bounds if reg or regX is true then it is the distance to the registration point not the side set to CENTER or MIDDLE to center object and move amount provided in x if reg or regX is true then centers the registration point and moves the amount provided in x set to START to position LEFT for ZIM DIR constant is "ltr" or RIGHT when DIR="rtl" - END is the opposite vertical - (default TOP) TOP will position the top side to the top side of the container bounds set to BOTTOM to postion the bottom side from the bottom of the container bounds if reg or regY is true then it is the distance to the registration point not the side set to CENTER or MIDDLE to center object and move amount provided in y if reg or regY is true then centers the registration point and moves the amount provided in y container - (default current container or zdf stage) the Container to add the obj to and position index - (default null) if provided will addChildAt the object at the index (0 being bottom) add - (default true) add to container - set to false to not add reg - (default false) set to true to position to the registration point rather than sides, top or bottom See: POSREG contant - set POSREG=true; to change the default pos() to position the registration point This is good to adjust legacy code - or if the original pos setting is preferred. regX - (default reg) set to true to position x to the registration point rather than the sides will override reg if provided regY - (default reg) set to true to position y to the registration point rather than the top or bottom will override reg if provided PROPERTIES zimPos - added to the obj and holds an object with the initial pos() parameter values as follows: {x,y,h,v,i} for x, y, horizontal, vertical and index. note: to get the container ask for the obj parent property RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

obj.loc(target|x, y, container, index, add, localToLocal)

loc zim DisplayObject method DESCRIPTION locates obj registration at registration of provided target or at x and y if numbers are provided This is like the original pos() where the registration is used But it a single object with x y properties can be passed as a parameter Will calculate localToLocal if target is provided Also can add to container at an index SEE: https://zimjs.com/positioning EXAMPLE

const circle1 = new Circle().pos(100,100);
const circle2 = new Circle().loc(circle1); // adds on top of circle1

EXAMPLE

new Circle().loc(400, 400); // places reg of circle at 400, 400
// note, this is different than pos(400, 400) which would place left top of circle at 400, 400

PARAMETERS supports DUO - parameters or single object with properties below target | x - (default null) an object with x and y properties such as any ZIM Display Object (Rectangle, Button, etc) or a zim Point(100, 100) object or {x:100, y:300}, etc. or an Array with an x and y value [100,300] or can be a Number for an x value - in which case, a y value might be expected too y - (default null) an optional y value container - (default current container or zdf stage) the Container to add the obj to and position index - (default null) if provided will addChildAt the object at the index (0 being bottom) add - (default true) add to container - set to false to not add localToLocal - (default true) if target is provided, the obj will be placed on the target matching locations across coordiate spaces RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.mov(x, y)

mov zim DisplayObject method DESCRIPTION Move the object over in the x and/or y Equivalant to obj.x += x and obj.y += y Pass in 0 for no shift in x if you just want to shift y Gives chainable relative position SEE: https://zimjs.com/positioning EXAMPLE

new Circle().center().mov(50); // move to right 50

PARAMETERS supports DUO - parameters or single object with properties below x - (default 0) the distance in x to move (can be negative) y - (default 0) the distance in y to move (can be negative) RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

obj.sca(scale, scaleY)

sca zim DisplayObject method DESCRIPTION Chainable convenience function to do scaleX and scaleY in one call. If you pass in just the scale parameter, it scales both x and y to this value. If you pass in scale and scaleY then it scales x and y independently. Also see scaleTo(), fit() and Layout(). EXAMPLE

circle.sca(.5); // x and y scale to .5
circle.sca(.5, 2); // x scale to .5 and y scale to 2

PARAMETERS scale - the scale (1 being full scale, 2 being twice as big, etc.) scaleY - (default null) pass this in to scale x and y independently RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

obj.alp(alpha)

alp zim DisplayObject method DESCRIPTION Chainable convenience function to set the alpha See also the CreateJS set({prop:val, prop2:val}) method; See also vis() and visible to keep hitTests as alp(0) does not EXAMPLE

circle.alp(.5);

PARAMETERS alpha - (default null) the alpha between 0 and 1 RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

obj.vis(visible)

vis zim DisplayObject method DESCRIPTION Chainable convenience function to set the visible Also see alp() and alpha EXAMPLE

circle.vis(false);

PARAMETERS visible - (default true) boolean for visibility RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.ble(blendMode)

ble zim DisplayObject method DESCRIPTION Chainable convenience function to set the blendMode (compositeOperation) Also see: https://developer.mozilla.org/en-US/docs/Web/API/CanvasRenderingContext2D/globalCompositeOperation EXAMPLE

new Circle(100, red).center().ble("difference");

// note: a blendMode will not work against the background color of the canvas
// if this is desired, add a rectangle onto the stage to start
new Rectangle(W, H, F.color).addTo();
new Circle(100, red).center().ble("difference");

PARAMETERS blendMode - (default "difference") the blendMode string: normal, multiply, screen, overlay, darken, lighten color-dodge, color-burn, hard-light, soft-light difference, exclusion, hue, saturation, color, luminosity OR the compositeOperation string: source-over, source-in, source-out, source-atop, destination-over, destination-in, destination-out, destination-atop, copy, xor RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.dye(color)

dye zim DisplayObject method DESCRIPTION Chainable convenience function to set the color of a shape or the backgroundColor of an object with backgroundColor Also see color and backgroundColor properties EXAMPLE

circle.dye(red); // same as circle.color = red;
button.dye(blue); // same as button.backgroundColor = blue;

PARAMETERS color - a ZIM or HTML color - green, "blue", "#333", etc. RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.hov(value, prop)

hov zim DisplayObject method DESCRIPTION Chainable convenience function to set the rollover (hover) property of an object This defaults to alpha if a number and color if a string But the type of property can also be set - for multiple properties, use a Button This sets mouseover and mouseout events on the object It will also set the cursor of the object to "pointer" This can be changed with the cursor property or the cur() method EXAMPLE

new Circle().center().alp(.5).hov(.8);
new Rectangle(100,100,blue).center().hov(green);
new Triangle().center().hov(1.5, "scale");

PARAMETERS value - (default 1) the hover value of the property if a number, the default property is alpha if a string, the default property is color passing in -1 will remove the hover prop - (default alpha or color as stated above) the property to change to the value on hover RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.rot(rotation, x, y)

rot zim DisplayObject method DESCRIPTION Chainable convenience function to set the rotation See also the CreateJS set({prop:val, prop2:val}) method; EXAMPLE

new Rectangle().center().rot(180);

PARAMETERS rotation - (default null) the rotation in degrees x - (default regX) set an x value to rotate about y - (default regY) set a y value to rotate about RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

obj.siz(width, height, only)

siz zim DisplayObject method DESCRIPTION Chainable convenience function to set width and height in one call. If you pass in just the width or height parameter, it keeps the aspect ratio. If you want to set only the width or height, then set only to true. If you pass in both the width and height then it sets both. Note: that width and height will adjust the scaleX and scaleY of the object. Also see width, height, widthOnly, heightOnly. EXAMPLE

const rect = new Rectangle(100,200,blue).addTo();
rect.siz(200); // sets width to 200 and height to 400
rect.siz(200, null, true); // sets width to 200 and leaves height at 200
rect.siz(200, 100); // sets width to 200 and height to 100

PARAMETERS width - (default null) the width of the object setting only the width will set the widht and keep the aspect ratio unless the only parameter is set to true height - (default null) the height of the object setting only the width will set the widht and keep the aspect ratio unless the only parameter is set to true only - (default false) - defaults to keeping aspect ratio when one dimension set set to true to scale only a single dimension (like widthOnly and heightOnly properties) RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

obj.ske(skewX, skewY)

ske zim DisplayObject method DESCRIPTION Chainable convenience function to skewX and skewY (slant) See also the CreateJS set({prop:val, prop2:val}) method; EXAMPLE

new Circle().center().ske(20);

PARAMETERS skewX - (default null) the x skew skewY - (default null) the y skew RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

obj.reg(regX, regY, still)

reg zim DisplayObject method DESCRIPTION Chainable convenience function to regX and regY (registration point) The registration point is the point the object is positioned with and the object scales and rotates around the registration point See also the CreateJS set({prop:val, prop2:val}) method; See also centerReg() NOTE most rectangular objects have their registration at the top left whereas most circular objects (not images, though) have their registration point in the center. But this registration point can be moved anywhere. See: https://codepen.io/zimjs/pen/qBEjYZV EXAMPLE

new Circle().reg(200, 200).center().outline(); // the circle in the outline() shows the registration point

EXAMPLE

new Rectangle().reg(RIGHT,BOTTOM).center(); // place reg at the bottom right corner

PARAMETERS regX - (default null) the x registration as a number or use LEFT, CENTER, RIGHT, START, END (for START and END, see DIR setting) use CENTER with no regY to center both regX and regY use CENTER for regX and DEFAULT for regY to only center regX regY - (default null) the y registration as a number or use TOP, CENTER, BOTTOM still - (default false) set to true to move the object to counter the registration change this will let you set the registration point without moving the object RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

obj.top()

top zim DisplayObject method DESCRIPTION Places object on top layer in container - if in a container returns the object for chaining Can also just addTo(container) to re-add to top NOTE for some situations this will break code so a safer way is obj.parent.setChildIndex(obj, obj.parent.numChildren-1); which is what this method uses EXAMPLE

const circle = new Circle(100, red).center();
new Rectangle(200,200,blue).center();
circle.top(); // brings circle to the top of parent container - in this case, the stage

RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.bot()

bot zim DisplayObject method DESCRIPTION Places object on bottom layer in container - if in a container returns the object for chaining EXAMPLE

new Rectangle(200,200,blue).center();
new Circle(100, red).center().bot(); // put circle on bottom layer (0) of parent container

RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.ord(num)

ord zim DisplayObject method DESCRIPTION Moves object layer order in container - if in a container returns the object for chaining EXAMPLE

circle.bot().ord(1); // put circle one layer up from bottom of parent container
circle.top().ord(-2); // put circle two layers down from top (third highest layer)

PARAMETERS num - (default 0) the number of levels (layers) up or down to move the object 1 will move the object one level higher, -1 will move it one level lower 2 will move the object two levels higher, -2 will be two levels lower, etc. RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.cur(type)

cur zim DisplayObject method DESCRIPTION Chainable function that sets the object's cursor to the type provided - same as CSS cursors. NOTE if using drag(), it will set its own cursor, so use the dragCursor parameter in that case. NOTE there are also custom cursors as the cursors property of Frame. EXAMPLE

const circle = new Circle(10, red).center().cur(); // "pointer"
circle.on("click", ()=>{zog("yes");});

PARAMETERS type - (default "pointer") the CSS cursor to set https://developer.mozilla.org/en-US/docs/Web/CSS/cursor Common cursors are "default", "pointer", "none", "Wait", "move", "grab", "grabbing", "zoom-in", "zoom-out", and various resize like "ew-resize" RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

obj.sha(color||Shadow, offsetX, offsetY, blur)

sha zim DisplayObject method DESCRIPTION Chainable function that sets the object's drop shadow to a CreateJS Shadow indirectly or directly EXAMPLE

// indirectly set the CreateJS Shadow
// with sha(color, offsetX, offsetY, blur)
const circle = new Circle(10, red).center().sha("rgba(0,0,0,.2)", 10, 5, 5);

// directly set the CreateJS Shadow
// with sha(new createjs.Shadow())
const shadow = new createjs.Shadow("rgba(0,0,0,.2)", 10, 5, 5);
const circle1 = new Circle(10, "pink").center().mov(-30).sha(shadow);
const circle2 = new Circle(10, "yellow").center().mov(30).sha(shadow);

PARAMETERS color||Shadow (default "rgba(0,0,0,.3)") the CSS color for the shadow - "red", dark, etc. or pass a single parameter that is a CreateJS Shadow object https://www.createjs.com/docs/easeljs/classes/Shadow.html pass in -1 to remove a shadow - remember to S.update() offsetX (default .08 the width or 5 if no width) the distance in the x that the shadow is moved over - can be negatitve offsetY (default .08 the height or 5 if no height) the distance in the y that the shadow is moved over - can be negatitve blur (default .16 the width or 10 if no width) the distance the shadow is blurred RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

obj.dep(depth)

dep zim DisplayObject method DESCRIPTION A chainable method to set the depth property of a Display object for use with ZIM VR(). When the object is added to VR it will be cloned into two channels and shifted left and right based on its depth. A depth of 0 will not shift the object and this will appear flat on the screen. A depth of 20 will shift 20 pixels left and right and appear to come out of the screen. A depth of -20 will appear to go into the screen. Depending on the VR parallax settings, depth can also affect parallax. A negative depth does not unless negativeParallax is set to true in the VR parameters. EXAMPLE

new Circle().center().dep(10);

PARAMETERS depth - (default 0) the apparent depth in ZIM VR - or set the depth property RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

obj.nam(name)

nam zim DisplayObject method DESCRIPTION A chainable method to set the name property of a DisplayObject. The object can then be accessed with object("name") (or zim.object("name") if zns is true) BACKGROUND CreateJS provides Containers with a name property and a getChildByName() method but you have to remember to ask the parent container for the child and it is a little lengthy. In ZIM Cat 01, nam() and object() were introduced as a global way to handle object names. Usually, a variable name is used to reference objects but the name offers an alternative. Note: naming an object with the same name will overwrite earlier names accessible through object() This will NOT remove the name property from the previous object So it is possible that the previous object can still be accessed with parent.getChildByName() parent.getChildByName() will find the first child with that name in the container object() will find the last named object with that name anywhere We could remove previous name properties with the same name but we decided not to Let us know your thoughts at https://forum.zimjs.com EXAMPLE

new Circle().nam("ball").center();

// see what names there are:
zog(object.getNames()); // ["ball"] - if only "ball" has been named

if (mobile()) object("ball").sca(2);
else object("ball").dispose();

zog(object.getNames()); // [] - if only "ball" has been named

object("ball").tap(e=>{
   zog(e.target.name); // "ball"
});

PARAMETERS name - a String to set the name property of the object RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.movement(call)

movement zim DisplayObject method DESCRIPTION Chainable convenience method that captures mouse movement over an object. This triggers when a mouseover is active and stagemousemovement dispatches. It also triggers when a pressmove dispatches - so good for mobile. A callback function is called on movement. NOTE set an object's noMovement property to true to remove these events SEE: noMovement() as well EXAMPLE

const pic = new Pic("picture.jpg").center().movement(()=>{
   mask.widthOnly = F.mouseX-pic.x;
   S.update();
});
const mask = new Rectangle(pic.width, pic.height, F.color).loc(pic).ord(-1);
pic.setMask(mask, true); // dynamic

RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.noMovement()

noMovement zim DisplayObject method DESCRIPTION removes the events added with movement() EXAMPLE

if (timer < 5) pic.noMovement();

RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.tap(call, distance, time, once, dbl, dblTime, call2, call3, call4)

tap zim DisplayObject method DESCRIPTION Chainable convenience method that adds a mousedown and mouseup event to the object that requires the to move less than distance parameter This is more like a proper click - down up without dragging. This method works on desktop or mobile, etc. An optional time parameter is provided if a minimum time is desired. Note that a click event also works on mobile as a "tap" but click also allows dragging between down and up presses - so really is a mouseup. This will automatically add a cursor of "pointer" which can be changed with the cursor property or cur() method When dbl is set to true call will be called when a double tap occurs With this setting, tap also handles either a single or double tap by providing call3 or call4. call3 will call if a single tap happens regardless of whether there is a double tap or not call4 will call if a single tap happens and there is no double tap this means it waits for the double tap time to fail and then calls call4 To give a more responsive single tap it reduces the default dblTime value NOTE tap() ignores List titleBar and organizer as to not conflict with tapping on actual list NOTE set an object's noTap property to true to avoid activating a hold on an object SEE: noTap() as well EXAMPLE

new Circle(50, red).tap(e=>{
   e.target.alpha = .5;
   S.update();
});

EXAMPLE

new Button().tap(()=>{
   zgo("https://zimjs.com", "_blank"); // open ZIM site in new tab
});

EXAMPLE

// wanting to do one thing on single tap and another thing on double tap on same object
// this will set the default dblTime to .5 seconds (rather than 1 second)
new Rectangle().center().tap({
   dbl:true,
   call:()=>{
      // do double tap code
      S.update();
   },
   call4:()=>{
      // do single tap code
      S.update();
   }
});

PARAMETERS supports DUO - parameters or single object with properties below call - the function to call when clicked call will receive the event object as a parameter (with target, currentTarget, etc. properties) distance - (default 5 or 10 if dbl is true) distance in pixels within which the mouseup must occur for a click to be counted if dbl is true it will lengthen the default distance to give an easier double tap time - (default 8) time in seconds within which the mouseup must occur for a click to be counted - also see TIME constant once - (default false) set to true to capture only one click then auto-remove listeners dbl - (default false) set to true to capture a double click - this works on mobile where dblclick may not dblTime - (default 1 or .5 if call4) time in seconds from first pressup to pressup a second time to count as a double tap - also see TIME constant if call4 is provided it will shorten the default dbl tap time to give a more responsive single tap alternative call2 - (default null) a function to call on pressup if a tap is not made call3 - (default null) with dbl set to true, a function to call on single tap regardless of a double tap or not call4 - (default null) with dbl set to true, a function to call on single tap only if double tap fails cursor - (default pointer) set to a CSS cursor or false if not wanting to set cursor on tap RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.noTap()

noTap zim DisplayObject method DESCRIPTION removes the mousedown and mouseup events added with tap() EXAMPLE

let num = 0;
const circle = new Circle(50, red).center().tap(e=>{
   num++;
   e.target.alpha -= .2;
   if (num == 2) circle.noTap();
   S.update();
});

RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.hold(call, distance, time, once)

hold zim DisplayObject method DESCRIPTION Chainable convenience method that adds a press and hold event to the object The callback function will run after the object is held for a certain time without moving the object This method can be used on mobile to replace shift keys, etc. This will automatically add a cursor of "pointer" - although mobile will not see it which can be changed with the cursor property or cur() method NOTE set an object's noHold property to true to avoid activating a hold on an object SEE: noHold() as well EXAMPLE

// remove circle if held for 1000 ms (one second)
new Circle(50, red).hold(e=>{
   e.target.removeFrom();
   S.update();
});

PARAMETERS call - the function to call after hold time call will receive the event object as a parameter (with target, currentTarget, etc. properties) distance - (default 5) distance in pixels within which the mouseup must occur for a hold to be counted time - (default 1.5) time in seconds before hold is activated once - (default false) set to true to capture only one click then auto-remove listeners RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.noHold()

noHold zim DisplayObject method DESCRIPTION removes the mousedown and mouseup events added with hold() EXAMPLE

const circle = new Circle(50, red).hold(e=>{
   e.target.removeFrom();
   S.update();
});
if (score > 10) circle.noHold();

RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.change(call, once)

change zim DisplayObject method DESCRIPTION Chainable convenience method that adds a change event to the object This only works for components that dispatch a change event ;-) SEE: noChange() as well EXAMPLE

new Tabs().change(e=>{
   zog(e.target.text); // the text of the selected tab
});

PARAMETERS call - the function to call when changed call will receive the event object as a parameter (with target, currentTarget, etc. properties) once - (default false) set to true to capture only one click then auto-remove listeners RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.noChange()

noChange zim DisplayObject method DESCRIPTION removes the change event added with change() EXAMPLE

const tabs = new Tabs().change(()=>{
   zog(tabs.text);
});
if (score > 10) tabs.noChange(); // removes change event

RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.drag(boundary, axis, overCursor, dragCursor, all, swipe, localBoundary, onTop, surround, slide, slideFactor, slideSnap, slideSnapDamp, reg, removeTweens, startBounds, rect, currentTarget, offStage, immediateBoundary, singleTouch)

drag zim DisplayObject method DESCRIPTION Adds drag and drop to an object with a variety of options. Handles scaled, rotated nested objects. Also see draggable property for setting a default drag() and noDrag() and to indicate whether a drag has been set. NOTE drag() will stop ZIM Swipe() from triggering a swipe event. Set the overridNoSwipe parameter of ZIM Swipe() to true to capture swipe events. NOTE also see the draggable property - set to true for basic drag() and false for noDrag() EXAMPLE

const radius = 50;
const circle = new Circle(radius, red);
circle.center();
circle.drag();

// OR with chaining
new Circle(radius, red).center().drag();

// OR with ZIM DUO
circle.drag({slide:true});

// BOUNDARY
// circle has its registration point in the middle
// keep registration point within rectangle starting at x=100, y=100
// and drag within a width of 500 and height of 400
const boundary = new Boundary(100,100,500,400);
circle.drag(boundary);

// or keep circle on the stage with the following
const boundary = new Boundary(0,0,W,H).contract(radius);
circle.drag(boundary); // drag within stage

// or by passing the stage (or a Container as a boundary)
circle.drag(S); // drag within stage

EXAMPLE

// dragging only horizontal or vertical at a time
const circle = new Circle(50,red).center().drag();
circle.on("mousedown", ()=>{
   const start = {x:circle.x, y:circle.y};
   circle.on("pressmove",()=>{
      timeout(.01, ()=>{ // works without but this gives a little better feel
         let horizontal = Math.abs(circle.x-start.x) >= Math.abs(circle.y-start.y);
         let boundary = horizontal?new Boundary(0, start.y, W, 0):new Boundary(start.x, 0, 0, H);
         circle.dragBoundary(boundary);
      });
   }, null, true); // once
});
circle.on("pressup", ()=>{circle.dragBoundary()});

PARAMETERS supports DUO - parameters or single object with properties below boundary - (default null) a ZIM Boundary object for the drag boundary or a ZIM DisplayObject including stage If the boundary is a display object then ZIM will keep the shape of the dragged object inside the bounds. If the boundary object is a Blob then the dragged object will stay within the Blob (experimental). If the boundary object is a Circle then the registration point of the dragged object will stay within the circle If the object being dragged is a Pic() then make sure it is preloaded or has dimensions before adding a drag boundary If the drag is on a container and the "all" parameter is false then ZIM will call drag methods on each child so the bound calculations are easier. The drags will be applied after a .05 second delay allowing items to be added directly after. Alternatively, drag() can be placed on the container AFTER the objects are added and the immediateBoundary parameter set to true. Or drag() can be applied manually on each child. a boundary with 0 width will drag vertically. A boundary with 0 height will drag horizontally or see the axis parameter note: boundary will only work in 90-degree-rotated containers - as such, do slant Window and List, etc. If surround is true then it will make sure the obj surrounds the boundary rather than stays within it This boundary is relative to the stage (global). If a boundary relative to the object's parent is desired then set the localBoundary parameter to true. Rectangle, Stage, StageGL - will keep object fully inside the bounds (based on bounds of object when adding drag). axis - (default BOTH) or HORIZONTAL or VERTICAL - set the axis of the drag also see the boundary parameter where the width can be set to 0 for vertical dragging with a limit of y and the height or the height can be set to 0 for horizontal dragging with limit of x and the width overCursor - (default "pointer") the CSS cursor property as a string for rolling over the object dragCursor - (default "pointer") the CSS cursor property as a string for pressing and dragging the object all - (default false) set to true to drag a whole container rather than its parts (was called currentTarget) eg. container.drag(); will drag any object within the container container.drag({all:true}) will drag the whole container See: DRAGALL contant - set DRAGALL=true; to change the default drag to drag a whole container swipe - (default false) which prevents a swipe from triggering when dragging localBoundary - (default false) which means the rect is global - set to true for a rect in the object parent frame onTop - (default true) brings the dragged object to the top of the container - unless Keyboard at top. // to drag on top of keyboard, set the type property of the keyboard to "LowerKeyboard" - or anything other than Keyboard surround - (default false) is for dragging a big object that always surrounds the boundary slide - (default false) will let you throw the object and dispatch a slidestop event when done slideFactor - (default .9) is the factor multiplied by dragging velocity (1 no slowing, .7 fast slowing) slideSnap - (default true) lets the object go outside and snap back to bounds - also VERTICAL, HORIZONTAL, and false slideSnapDamp - (default .1) the damping to snap back to boundary reg - (default false) when set to true will snap the registration of the object to the mouse position removeTweens - (default true) will automatically remove any tweens that have an x and y set unless set to false if, for example, animate() has a rotation and an x set, then both will be canceled but if an animate() call to rotation and another to x is set then only the x would be canceled and rotation would continue if after dropping, the animation in x should continue, then a new animate() in x will need to be called this avoids conflict between dragging and animating position which is very confusing for beginner coders startBounds - (default true) set to false to ignore bound rect before dragging (sometimes handy when putting drag on container) rect - (depreciated) same as boundary - kept for backwards compatibility when using config object currentTarget - (default false) same as the all parameter - kept for backwards compatibility when using config object offStage - (default false) set to true to be able to drag object off stage (thanks Shammi!) immediateBoundary - (default false) set to true to add bounds immediately when drag() is set on a Container. this is normally set to false for a .05 second delay to allow objects to be added to Container before setting bounds. singleTouch - (default false) set to true to let only one touch operate the drag also see Frame() singleTouch setting - but setting on drag will only affect that object's drag note: will not update stage if OPTIMIZE is set to true unless Ticker.update is set to true or you run Ticker.always(stage) see zim.Ticker PROPERTIES adds a dragPaused property to get or set the pause of the drag - which allows setting to be kept see also noDrag() where settings will be removed EVENTS Adds a "slidestart" event to the drag object that is dispatched when the object starts sliding - if slide is true Adds a "slidestop" event to the drag object that is dispatched when the object comes to rest after sliding - if slide is true RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

obj.noDrag(recursive)

noDrag zim DisplayObject method DESCRIPTION Removes drag function from an object. This is not a stopDrag function (as in the drop of a drag and drop). Dropping happens automatically with the drag() function. The noDrag function turns off the drag function so it is no longer draggable. EXAMPLE

circle.noDrag();

PARAMETERS recursive (default true) - turns off drags on children snapBack (default true) - if outside of bounds will animate back to inside bounds RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

obj.dragBoundary(boundary)

dragBoundary zim DisplayObject method DESCRIPTION Dynamically changes or adds a boundary rectangle to the object being dragged with drag(). NOTE replaces old ZIM dragRect() method EXAMPLE

const circle = new Circle().center().drag();
// add (or change) a boundary 5 seconds later
timeout(5, ()=>{
   const boundary = new Boundary(100,100,500,400);
   circle.dragBoundary(boundary);
});

PARAMETERS boundary - is a ZIM Boundary object for the bounds - the local / global does not change from the original drag pass in null to remove the boundary - the boundary while dragging and be removed for next mousedown to solve this issue while dragging, set a boundary of the stage size or larger... RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.mouse()

mouse zim DisplayObject method DESCRIPTION Sets object's mouseChildren and mouseEnabled properties to true These are the defaults - used primarily to reverse ZIM noMouse() which can be used to turn off mouseChildren and mouseEnabled NOTE just using mouse() does not add cursors or interactivity see cur(), hov(), drag(), transform(), gesture(), or various mouse events EXAMPLE

const circle = new Circle().drag();
timeout(1, ()=>{
   circle.noMouse(); // circle cannot not be dragged, etc.
   timeout(1, ()=>{
      circle.mouse(); // circle can be dragged
   });
});

RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.noMouse()

noMouse zim DisplayObject method DESCRIPTION Sets object's mouseChildren and mouseEnabled properties to false This can be used to save processing on complex objects that do not need interactivity NOTE this will prevent interactivity for cur(), hov(), drag(), transform(), gesture() and any mouse events like mousedown, click, mouseover, etc. EXAMPLE

const circle = new Circle().drag();
timeout(1, ()=>{
   circle.noMouse(); // circle cannot not be dragged, etc.
   timeout(1, ()=>{
      circle.mouse(); // circle can be dragged
   });
});

RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.wire(target, prop, twoWay, setSource, filter, call, input)

wire zim DisplayObject method DESCRIPTION The wire() method connects an object (source) property to another object (target) property. This can be one way (default) or two way with the twoWay parameter set to true. For instance: new Slider().center().wire(circle, "scale"); // note the property as string will change the scale of the circle as the slider's current value changes. The value (if the object has one) is the default input followed by index. If the source object has neither value nor index then the input is the same property as the target property. For instance: new Circle().center().wire(circle2, "x", true); would mean changing either circle's x property would change the other. Multiple wire() methods can be chained. For instance: slider.wire(circle, "x").wire(circle, "y"); slider.wire(circle, "scale").wire(circle2, "scale"); BACKGROUND The wire system is an alternative to events at 25% the size of traditional JS addEventListener. It is a single extra conditional in the Ticker that checks to see if a Dictionary list has length. If it does it cycles through the list to see if input properties have changed and if so, sets the target property. Updates are batched to a single stage update This is the same stage update that is used by any Ticker functions including those by drag, animate, etc. Basically, wire is same system as events but with a more specific format - adds 1.4 k to ZIM file size. WIRED There is also a wired() method that can be be put on the target object and points to a source object to set a specified property. This just flips the target and the source and calls the wire() function. The methods MUST go on the second object made - so using either wire() or wired() covers use cases. There are also noWire() and noWired() methods to remove connections - with various alternatives. FILTER AND CALLBACK wire is also similar to ZIM Bind and bind() but binds within ZIM where bind binds outside of ZIM. Like Bind, wire uses an optional filter and callback function. For instance: new Dial().center().wire(tone, "volume", null, filter, call); will call the filter function before setting the target property (tone.volume). The filter function will receive the data (the input value) as its parameter and MUST return data to be passed along but the data can be changed or tested. The call function will be called after the target property is set. See: https://zimjs.com/cat/wire.html See: https://zimjs.com/cat/synth.html EXAMPLE

const circle = new Circle(100, pink, dark).center();
new Dial({step:0, min:1, max:3})
   .center()
   .wire(circle, "scale");

// S.update(); // depending, let the wire() set the stage update

EXAMPLE

// this time the circle (target) starts at a scale of 2
const circle = new Circle(100, pink, dark).sca(2).center();
// so we want the dial (source) to start at 2 as well
// we could use the Dial parameter value:circle.scale
// or we can use the wire setSource to true
new Dial({step:0, min:1, max:3})
   .center()
   .wire(circle, "scale", null, true); // true for setSource to the target value

// S.update(); // depending, let the wire() set the stage update

EXAMPLE

const rect = new Rectangle(100, 100, blue, dark)
   .pos(0,70,CENTER)
   .drag(S);

new Slider({min:0, max:W-100, value:rect.x})
   .pos(0,100,CENTER,BOTTOM)
   .wire(rect, "x", true, null, data=>{
      if (data < 100 || data > W-100-100) rect.color = red;
      return data; // filter must return data - even if not changing it
   }, data=>{
      if (data >= 100 && data <= W-100-100) rect.color = blue;
   });

// timeout(5, ()=>{
//    slider.noWire(); // remove slider rect wire
// });

EXAMPLE

const person = {num:1, hair:red, eyes:blue}
const shirt = {num:1, color:dark, pocket:dark}
wire(person, shirt, "num"); // will wire person num to shirt num
wired({ // or could use wire() - just showing wired()
   source:person, // will wire person hair property to shirt color property
   input:"hair",
   target:shirt,
   prop:"color"
});
person.num = 3;
person.hair = blue;
// note: could use addWires(person) to add wire and wired methods to person if desired

timeout(.01, ()=>{ // must wait for Ticker to go
   zog(shirt.num); // 3
   zog(shirt.color); // blue
});

EXAMPLE

// wire a bunch of on/off components together
STYLE = {
   color:blue.darken(.3),
   backgroundColor:blue.lighten(.3),
   borderColor:blue.darken(.3),
   always:true, // for RadioButtons
   Toggle:{
      backgroundColor:blue.darken(.3),
      toggleBackgroundColor:blue.lighten(.3)
   }
}

const radio = new RadioButtons(50,["OFF","ON"]).center();
const check = new CheckBox(50,"ON").center().mov(300);
const toggle = new Toggle(100,50,"ON").center().mov(-300)
Style.add({
   backgroundColor:blue.toAlpha(.3),
   Label:{size:40, backgroundColor:F.color}
});
const selector = new Selector(new Tile({
   obj:[new Label("OFF").centerReg(), new Label("ON").centerReg()],
   cols:2,
   spacingH:30,
   spacingV:20,
   unique:true
})).center().mov(0,200);

radio
   .wire(check, "checked", true, null, convert)
   .wire(toggle, "toggled", true, null, convert)
   .wire(selector, "index", true);

// convert true/false to 0/1 and visa versa
function convert(data) {
   if (data===true) data = 1;
   else if (data===false) data = 0;
   else if (data===1) data = true;
   else if (data===0) data = false;
   return data;
}

PARAMETERS supports DUO - parameters or single object with properties below ** the current object is called the source - it will be setting the prop on the target target - the object that has the property to wire to (and change) prop (default input)- a String name of the property to change on the target if no property is provided it assumes the input property if provided the only time no prop would be useful is to wire together components like a Slider to a Dial where both will default to index twoWay (default false) - also have the change in prop on target change the source object's property setSource (default false) - initially, by default, wire will change the target value to the source value setting setSource to true will initially set the source value to the target value this is independent of twoWay - so the twoWay setting does not matter filter (default null) - a function to call before the prop is changed on the target (or source object if twoWay is true) this function receives a data parameter that holds the value of the property that will be changed on the target the prop value can be tested or changed the filter function MUST return the value whether it is modified or not call (default null) - a function that is called once the property has been set on the target - receives the value as a parameter input (default DEFAULTWIRE or "value" or "index" or prop) - an optional source property as a String wire will usually be used to wire a component to a DisplayObject and components usually have a value or index property that is changing in a change event, for instance so wire by default uses these if available and a change event is no longer needed Set ZIM DEFAULTWIRE constant to a String of the desired input if different than above. If the source object does not have a value or index property then the same property name as the target prop is used (unless an input is provided here) RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

obj.noWire(target, prop, input)

noWire zim DisplayObject method DESCRIPTION turns off a wire() on the object - can optionally filter by target, prop and or input EXAMPLE

if (circle.hitTestBounds(rect)) {
   slider.noWire();
   // or slider.noWire(circle); // if slider has more than one wire
});

EXAMPLE

timeout(10, ()=>{
   noWire(); // turn off all wires
   // noWire(null, null, "scale"); // turn off all wires adjusting scale
   // noWire({target:mySprite}); // turn off all wires on mySprite
});

RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.wired(source, prop, twoWay, setSource, filter, call, input)

wired zim DisplayObject method DESCRIPTION Wires an object's property based on a source - see docs for ZIM wire() for details. A wiring can be added only if the source object and the target object exist. For instance we CANNOT do (even if we declare circle first): new Slider().center().wire(circle, "scale"); var circle = new Circle().center(); OPTION 1: var circle = new Circle().center(); new Slider().center().wire(circle, "scale"); OPTION 2: var slider = new Slider().center(); new Circle().center().wired(slider, "scale"); // use wired() wired() just switches the source and target and calls wired() See the wire() method for parameters and description EXAMPLE

const slider = new Slider().center();
new Circle().center().wired(slider, "scale");

RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

obj.noWired()

noWired zim DisplayObject method DESCRIPTION Turns off wired() on the object. EXAMPLE

if (circle.hitTestBounds(rect)) {
   circle.noWired();
});

RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.bind(id, props, extra, filter, bindObj)

bind zim DisplayObject method DESCRIPTION Binds the specified object properties to a Bind object's connection. This could be a connection to localStorage or a server script to a database. This will allow a cleaner way to save and retrieve data. See the docs for the ZIM Bind class for more details and examples See: https://zimjs.com/ten/bind.html EXAMPLE

// LOCALSTORAGE example
const b = new Bind(); // create a Bind object - defaults to localStorage
// b.clear(); // clear localStorage memory

// bind() will get data remembered in localStorage
// and also set up the binding
const c = new Circle().center().bind("circle", ["x","y"]).drag();

// when we want to update the binding call the to() method
c.on("pressup", function () {b.to();});

PARAMETERS ** supports DUO - parameters or single object with properties below id - a one-word string ID for the bind this will be used as the JSON key for the data props - a property to bind as a string or an array of properties, eg. ["x","y"] or an object literal in the form {prop1:TO, prop2:FROM, prop3:BOTH, prop4:TO, etc.} by default the property will be bound as BOTH - as in TO and FROM this means data would be received on bind.to() calls and sent on bind.from() calls extra (default null) extra information to be sent to the server (not localStorage) this could be an id or a search term, etc. it will have encodeURI() applied this can be received in php as $_GET["extra"] or $_POST["extra"] depending on bindType filter (default null) a function to run before sending and after receiving data this will receive (data, command, extra) parameters the function must return the data - see Bind masterFilter parameter for more information note: the masterFilter if supplied will run as well before the filter bindObj (default zimDefaultBind) - set to a specific bind object or keep as default see also ZIM Bind() setDefault parameter and default property RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

obj.noBind(props, removeConnectionData, call, bindObj)

noBind zim DisplayObject method DESCRIPTION Removes a binding from an object and its bound data See: bind() and ZIM Bind(); EXAMPLE

const b = new Bind(); // create a Bind object - defaults to localStorage
const c = new Circle().center().bind("circle", ["x","y"]).drag();
c.on("pressup", ()=>{b.to();});
new Button({label:"REMOVE"}).loc(100,100).tap(()=>{
   // binding will be removed
   // next refresh, circle will be centered
   // but then will be bound again until button is pressed
   c.noBind();
});

PARAMETERS ** supports DUO - parameters or single object with properties below props - (default null) a property or an array of properties for which to remove the bind leaveing this blank will remove all bindings on the object removeConnectionData (default true) remove connection data this will clear removed data from localStorage for LOCALSTORAGE setting a "remove" property will be sent to the server for GET or POST with a JSON {id1:["prop1","prop2"], id2:["prop3"]} format of removed items call is a callback function after the data is sent and received the callback function will receive a result "success" or "error ..." in its parameter bindObj - (default zimDefaultBind) a specific bind object to remove from RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.transform(move, stretchX, stretchY, scale, rotate, allowToggle, visible, onTop, showStretch, showRotate, showScale, showReg, showBorder, borderColor, borderWidth, dashed, customCursors, handleSize, regSize, snapDistance, snapRotation, cache, events, ghostColor, ghostWidth, ghostDashed, ghostHidden, frame, container)

transform zim DisplayObject method DESCRIPTION The transform method adds transform controls to a display object. The controls allow the user to move, scale, stretch, rotate and change the registration point. Parameters are available to choose which of these transformations are available. By default, all the transformations are available to use but only the scale and registration point controls are showing. The others work as the user rolls over the edges or the outer corners. You can optionally set these to be visible as boxes on the sides and circles on the outer corners. NOTE works with the ZIM TransformManager() class to handle multiple transforms and saving data for persistence. NOTE the transformed object will have its mouseChildren set to false. CLICK turns off and on the controls if allowToggle parameter is set to true (default is true) If you use the TransformManager for multiple objects, the allowToggle is automatically set to true SHIFT rotate snaps to 45 Dropping the registration point will snap to corners or center if close enough - unless CTRL is down CTRL scale will scale about the registration point CTRL DBLCLICK will reset scale to 1 and rotation to 0 EXAMPLE

rect.transform(); // shows handles for tranformations

EXAMPLE

rect.transform({ // scale and stretch only
   move:false,
   rotate:false
});

// hide the rectangle's bottom stretch control so only can stretch from top
// note - transform() expects there to be a control so do not remove a control
// also, the controls have a hitArea so setting alpha to 0 will not work
rect.transformControls.stretchYControls.getChildAt(1).sca(0);
// or set its visible to false
rect.transformControls.stretchYControls.getChildAt(1).visible = false;

// Record the transforms and remake transforms when page reloads
// Or see the TransformManager
if (localStorage && localStorage.data) rect.transformControls.setData(localStorage.data, true);
rect.on("transformed", function() {
   if (localStorage) localStorage.data = rect.transformControls.recordData(true);
});

// change the color of the controls
var r = new Rectangle(100,100,grey).center().transform({borderColor:blue})
r.transformControls.scaleControls.loop(function (control) {
   control.color = blue;
   control.updateCache();
});

PARAMETERS supports DUO - parameters or single object with properties below move - (default true) let user move object stretchX - (default true) let user stretch object from left and right sides stretchY - (default true) let user stretch object from top and bottom scale - (default true) let user scale object from corners - might still be able to stretch from sides - see stretchX and stretchY rotate - (default true) let user rotate object allowToggle - (default true) let user hide and show controls with click - set to false not to let user hide controls visible - (default true) show the controls to start onTop - (default true) set to false to not move the selected shape to the top of its container showStretch - (default false - true on mobile) show side boxes for stretching - a cursor will always show if stretchX or stretchY is true showRotate - (default false - true on mobile) show circles at corners for rotation - a cursor will always show if rotation is true showScale - (default true) show corner boxes for scaling - a cursor will always show if scale is set to true showReg - (default true) show round circle for draggable registration point - rotates around registration point showBorder - (default true) show rectangle border borderColor - (default brown) any border color (CSS) borderWidth - (default 1) the width of the border dashed - (default false) set to true for dashed border customCursors - (default true - false on mobile) set to false for system cursors (system cursors will not be rotated) handleSize - (default 20 mobile - 10 desktop) the size of the control squares and circles regSize - (default 16) the size of the registration point circle snapDistance - (default 10) registration point will snap to corners and center if within this distance (and CTRL key not down) snapRotation - (default 5) rotation will snap to angles divisible by this value holding CTRL will avoid snapping holding SHIFT will rotate only multiples of 45 degrees cache (default true) - set to false to not cache the controls and cursors events (default false) - set to true to receive events while controls are being opertated otherwise events will only trigger on pressup (not pressmove) - this conserves processing events are turned on automatically for obj type Tag, TextArea and Loader ghostColor (default null) - color of outline when transform tools are not showing ghostWidth (default null) - width of outline when transform tools are not showing ghostDashed (default true) - dashed of outline if ghostColor or ghostWidth is set ghostHidden (default false) - set to true to start with ghostHidden frame (default zimDefaultFrame) - set to proper frame if on different frame container (default stage) - set to a container to keep transforms within that container normally leave as default so transforms will stay above other objects but on occasion such as when using with ZIM TextureActives, a container is required as the container is cached and used on a texture PROPERTIES toggled - adds a read-only Boolean to the object that is true if controls are showing otherwise false METHODS toggle(state - default null) - added to the object shows controls if hidden and hides controls if showing (returns the object for chaining) or pass in true to show controls or false to hide controls TRANSFORM CONTROL OBJECT When tranform() is set on an object, the object receives a transformControls property This holds the following: PROPERTIES: visible - read only whether the controls are visible ghost - read only as to whether the ghost outline is showing - set with showGhost and hideGhost ghostEnabled - read only as to whether the ghost outline will be turned on and off - set with addGhost and removeGhost controls - reference to the Container that holds all the controls scaleControls - reference to the Container that holds the corner boxes for scaling stretchXControls - reference to the Container that holds the left and right boxes for stretching stretchYControls - reference to the Container that holds the top and bottom boxes for stretching rotateControls - reference to the Container that holds the outer circles for rotating METHODS: hide() - hides the controls - returns object for chaining show() - shows the controls - returns object for chaining recordData(toJSON) - returns an object with type, x, y, scaleX, scaleY, rotation, skewX, skewY, visible PROPERTIES if toJSON (default false) is set to true, the return value is a JSON string setData(data, fromJSON) - sets the properties to match the data object passed in - this should come from recordData() if fromJSON (default false) is set to true, it will assume a JSON string is passed in as data returns object for chaining remove(noHide) - removes the controls - set noHide true if already hidden add(noShow) - adds the controls back if then have been removed - set noShow true if not wanting to show allowToggleOn() - sets the show / hide controls on with click allowToggleOff() - removes the show / hide controls on with click showGhost() - show the ghost outline - the ghostWidth or ghostColor must be set in initial parameters hideGhost() - hide the ghost outline toggleGhost(state) - if ghost is showing will hide ghost and if ghost is hidden will show ghost or set state to true to show ghost or false to not show ghost addGhost() - enable ghost outline functionality - the ghostWidth or ghostColor must be set in initial parameters removeGhost() - disable ghost outline functionality disable() - may show the controls if visible but cannot use them enable() - turns the using of the controls back on resize(dispatch) - call resize if the object is transformed in ways other than with the controls set dispatch to true to dispatch a "transformed" event - if manually adjusted this will save to TransformManager dispose() - remove all aspects of transform on object EVENTS Adds a "transformed" event to obj that is dispatched when pressup on any of the controls or on click if the events parameter (or events property on transformControls) is set to true then these happen on pressmove of controls the transformed event object has a transformType property the transformType property has values of "select" (if not moved), "size", "move", "rotate", "stretch", "reg" "reset" the transformed event object also has a pressup property that is true if on pressup and false if from pressmove events are turned on automatically for obj type Tag, TextArea and Loader Adds "transformshow" and "transformhide" events for when click to hide or show controls If TransformManager() is used there are more events available such as "persistset", etc. RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

obj.gesture(move, scale, rotate, boundary, minScale, maxScale, snapRotate, localBoundary, slide, slideFactor, regControl, onTop, surround, circularBounds, rect)

gesture zim DisplayObject method DESCRIPTION Sets multi-touch pan, pinch and rotate for position, scale and rotation Handles scaled and rotated containers Scale and rotation occur from the pinch point (with optional regControl for about the registration point) Note - gesture() only works on the currentTarget - not a container's children (like drag() can) ZIM Frame should have touch set to true (which is the default for mobile) ALSO see the noGesture() method to remove some or all gestures ALSO see the gestureBoundary() method to set or reset the boundary rectangle dynamically EXAMPLE

rect.gesture(); // move, scale and rotate with no bounds

EXAMPLE

rect.gesture({
   rotate:false,
   boundary:new Boundary(0,0,W,H),
   minScale:.5,
   maxScale:3,
   slide:true
});

PARAMETERS supports DUO - parameters or single object with properties below move - (default true) move the object with average of fingers scale - (default true) scale the object with first two fingers' pinch rotate - (default true) rotate the object with first two fingers' rotation boundary - (default null) ZIM Boundary rectangle with (x,y,w,h) to contain bounds of the object if surround is true then it will make sure the obj surrounds the boundary rather than stays within it See circularBounds parameter to keep circular shapes with boundary minScale - (default null) a minimum scale maxScale - (default null) a maximum scale snapRotate - (default 1) degrees to snap rotation to after rotation is finished localBoundary - (default false) set to true to make rect for bounds local rather than global slideFactor - (default 5) how much slide with 0 being no slide and then longer slide times and distance like 10, etc. regControl (default false) set to true to rotate and scale around registration point rather than pinch point onTop - (default true) brings the object to the top of the container surround - (default false) is for dragging a big object that always surrounds the rect must specify a rect and currently not supported unless rotate is false circularBounds - (default false) set to true if object is circular with center registration set to true to use radius to calculate rotated object in boundary if boundary is set rect - (depreciated) same as boundary - kept for backwards compatibility EVENTS Adds move, scale and rotate events to obj (when associated gesture parameters are set to true) If slide is true, obj dispatches a "slidestop" event when sliding stops RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

obj.noGesture(move, scale, rotate)

noGesture zim DisplayObject method DESCRIPTION Removes multi-touch pan, pinch and rotation gestures from an object. If all three are removed then deletes the zimTouch object and touch events from obj EXAMPLE

rect.noGesture(); // removes all gestures
// or
rect.noGesture(true, true, false); // would leave rotation
// or with ZIM DUO
rect.noGesture({rotation:false}); // would leave rotation

PARAMETERS supports DUO - parameters or single object with properties below move - (default true) - set to false not to remove move gesture scale - (default true) - set to false not to remove scale gesture rotate - (default true) - set to false not to remove rotate gesture RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

obj.gestureBoundary(boundary, new)

gestureBoundary zim DisplayObject method DESCRIPTION Dynamically changes or adds a boundary rectangle to the object being dragged with gesture(). EXAMPLE

const boundary = new Boundary(100,100,500,400); // x,y,w,h
circle.gestureBoundary(boundary);

PARAMETERS boundary - is a ZIM Boundary rectangle - the local / global does not change from the original gesture setting update - (default true) reset base drag boundary RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.effect(effect, x, y, width, height)

effect zim DisplayObject method DESCRIPTION Adds an effect to a DisplayObject such as: blur, glow, shadow, color and alpha mask effects. Also see hue, saturation, brightness and contrast convenience effects that are available as properties directly on the DisplayObject. SEE: https://zimjs.com/cat/effects.html BATCHING Effects are processor heavy. Too many can slow down the application. ZIM uses effect() to allow multiple effects to be added at once. These are then internally batched and updated with a single update rather than making each effect a stand-alone method requiring individual updates. EFFECTS PROPERTY The effects added with effect() are stored on the object's effects property. The effects themselves have properties that can be changed to change the effect. If an effect is changed the updateEffects() method needs to be called. ZIM does not do this automatically, allowing the changes to be batched with one call. See updateEffects() - also see noEffect() to remove effects. The effect properties and convenience effects can be animated and wiggled. In this case, the effects will be automatically updated by ZIM. CREATEJS FILTERS ZIM Effects wrap the CreateJS filters array and cache/updateCache system. Using effect() will overwrite manual usage of CreateJS filters array. The ZIM Effects system remembers effects in the effects property and overwrites the filters array each time an effect is added or updated. To update an effect, all the effects need to be re-applied regardless and all this is automatically handled by ZIM. EFFECT OBJECTS The following Effect objects can be passed into effect() These all have parameters that accept ZIM DUO, VEE and OCT. See the Doc entries under Controls > Effects. new BlurEffect() - apply blur new GlowEffect() - apply glow and knock out - thanks kudox.jp new ShadowEffect() - apply drop shadows and knock out - thanks kudox.jp new ColorEffect() - change colors new MultiEffect() - combination of hue, saturation, brightness, and contrast new AlphaEffect() - apply alpha mask EFFECT IDS The effects are referred to by id and have ids as follows (case insensitve): blur, glow, shadow, color, multi, alpha The id is the property name used to identify the effect in the object's effects property (plural s): obj.effects.glow.strength = 20; // using the glow id obj.updateEffects(); // this must be called to see the change Effect ids are used when animating (and wiggling): props:{"effects.blur.blurX":200} // no update is needed To remove effects use noEffect (singular) and use the id as follows: obj.noEffect(); // remove all effects (except convenience effects - see below) obj.noEffect("glow"); // remove the glow effect obj.noEffect(["glow", "color"]); // remove glow and color effects CONVENIENCE EFFECTS hue, saturation, brightness, contrast can be used directly on the object obj.hue = 100; // no need to updateEffects() // or obj.hueBatch = 100; // will set the effect obj.updateEffects(); // but updateEffects must be called to see the change Convenience effects can also be accessed through the multi id: obj.effects.multi.hue = 100; Any of the four properties can be removed by setting them to 0 obj.hue = 0; Convenience effects can also ALL be removed together with: obj.noEffect("multi"); The following will NOT remove the convenience effects: obj.noEffect(); // will not remove hue, saturation, brightness and contrast NOTE Effects are quite processor intensive so use sparingly. Each effect processes every pixel - when animating this results in hundreds of thousands of loops. ZIM has wrapped the CreateJS filters, filter property, caching and cacheUpdate system to make accessing filters easy - but apps will slow down if they are over-used. Keep the quality at 1 for animating filters at a decent framerate. Consider pre-processing images if effects do not have to be dynamic. NOTE when applying effects to rtl fonts make sure the DIR = "rtl" is set. EXAMPLE

// create a Label with a GlowEffect that shows through to the image below
new Pic("background.jpg").center();
new Label("WOW", 200, "impact")
   .center()
   .effect(new GlowEffect({
      color:red,
      blurX:50,
      blurY:50,
      strength:2,
      quality:2,
      knockout:true
   }));

EXAMPLE

// add a glow and shadow effect
// remove only the glow when pressed
const circle = new Circle(100,blue)
   .center()   
   .effect([ // apply two effects in an array      
      new GlowEffect({color:purple, blurX:100, inner:true}),      
      new ShadowEffect(20) // 20 is distance
   ]);
circle.on("mousedown", ()=>{   
   // specify type of effect to remove - otherwise removes all
   circle.noEffect("glow");
   S.update();
});

EXAMPLE

// add a 200 blurX effect and animate it to 0 rewind and looping
STYLE = {blurX:200} // just showing using style...
new Pic("image.png") // preloaded asset
   .center()
   .effect(new BlurEffect())
   .animate({
      // the blur effect is stored on the effects property of the object
      // and available through the effect id (blur)
      // we are animating the blurX of that
      // note the quotes around the DOT property format
      props:{"effects.blur.blurX":0},
      time:.7,
      rewind:true,
      rewindWait:.5,
      loop:true
   });

EXAMPLE

// wiggle the saturation of an image asset stored in pic
// so its saturation goes from 50-100 negative or positive in 1-3 seconds
// here we use a convenience effect (hue, saturation, brightness, contrast)
pic.wiggle("saturation", 0, 50, 100, 1, 3);

// This is the same as the following (so may as well use above)
pic.effect(new MultiEffect()).wiggle("effects.multi.saturation", 0, 50, 100, 1, 3);

PARAMETERS effect - (default null) a ZIM Effect object as detailed above or an array of ZIM Effect objects. Effects of a specific type are not compounded. For example, adding two blur effects will just use the last blur effect added. x - (default null) the x position of the cache bounds - will cache object bounds by default y - (default null) the y position of the cache bounds - will cache object bounds by default width - (default null) the width of the cache bounds - will cache object bounds by default height - (default null) the height of the cache bounds - will cache object bounds by default RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

obj.updateEffects(redoChache)

updateEffects zim DisplayObject method DESCRIPTION Updates an effect when its property or the object's internals are changed. For example a Sprite changes frame. Not needed for position, alpha, scale or rotation. This basically updates the cache on the object so the effects are applied. Note: setting hue, saturation, brightness and contrast directly on the object will update automatically. These can be batched by using hueBatch, saturationBatch, etc. which will change but not update until an obj.updateEffects() is called. EXAMPLE

// make an object more blurry in x each time it is pressed
const rect = new Rectangle(200,200,red)
   .center()
   .effect(new BlurEffect(10, 0)); // set to 0 in y otherwise it would take default blurY
rect.on("mousedown", ()=>{
   rect.effects.blur.blurX += 20;
   rect.updateEffects();
   S.update();
});

PARAMETERS redoCache - (default false) set to true to remake the cache the size of the bounds of the object if some other size is desired, use obj.cache(width, height) or obj.cache(x,y,width,height) instead of updateEffects() RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

obj.noEffect(effects, cache)

noEffect zim DisplayObject method DESCRIPTION Removes the effects or specified effects from an object. EXAMPLE

// add a glow and shadow effect
// remove only the glow when pressed
const circle = new Circle(100,blue)
   .center()   
   .effect([ // apply two effects in an array      
      new GlowEffect({color:purple, blurX:100, inner:true}),      
      new ShadowEffect(20) // 20 is distance
   ]);
circle.on("mousedown", ()=>{   
   // specify type of effect to remove - otherwise removes all
   circle.noEffect("glow");
   S.update();
});

PARAMETERS effects - (default null) will remove all effects applied with effect() unless an effect string or array of effect strings is provided Effect strings are (case insensitive): "blur", "glow", "shadow", "multi", "alpha" alternately, "Effect" can be added such as "BlurEffect" To remove hue, saturation, brightness and contrast set the object property to 0 for instance obj.hue = 0; Or to remove all four then can explicitly use obj.noEffect("multi") cache - (default false) will uncache object if all effects are gone set to true to leave object cached RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

obj.addPhysics(dynamic, contract, shape, friction, linear, angular, density, bounciness, maskBits, categoryBits, physics, restitution, sensor)

addPhysics zim DisplayObject method DESCRIPTION Add Physics to a DisplayObject. DisplayObject should have its registration point centered reg(CENTER) or centerReg() and be on the stage (or in non-transformed Container at 0,0 on stage) The Physics world can be set up with the ZIM Physics() class in the Controls module. Box2D and ZIM physics JavaScript helper module need to be imported. If no physics world has been created, the addPhysics() method will create a default world. The default world will have a borders around the stage and gravity of 10. See: https://zimjs.com/physics/ NOTE Adding physics also adds more methods and properties to the DisplayObject See the Physics() docs for all the details EXAMPLE

new Circle().center().addPhysics(); // circle will fall with gravity to the floor

EXAMPLE

// create a world with no gravity (viewed from top like air-hockey)
const physics = new Physics(0);

// create physics objects using the addPhysics() method
const circle = new Circle(50,blue,grey).center().addPhysics({bounciness:1.1});

// make sure to reg(CENTER) or centerReg() any rectangular objects
const rect = new Rectangle(30,400).reg(CENTER).pos(70,0,LEFT,CENTER).addPhysics(false); // static - do not move
const tri = new Triangle(150,150,150,green,grey).pos(200,0,LEFT,CENTER).addPhysics({linear:10}); // does not slide easily

// turn on dragging
physics.drag(); // note: to add a boundary use the borders parameter of Physics()

EXAMPLE

const physics = new Physics().drag();
const points = [ // fish shape
   [0.5,-29.2,0,0,-79.1,25.5,79.1,-25.5,"mirror"],[182.3,15.9,0,0,-33.9,-59.6,-31.1,55.6,"free"],
   [15.4,86.2,0,0,67,10.4,-67,-10.4,"mirror"],[-163.6,73.2,0,0,67.9,-49.9,10.7,-51.8,"free"],
   [-165.7,-43.9,0,0,11.9,40.8,70.1,43.6,"free"]
];
const blob = new Blob({
   points:points,
   interactive:false
})
   .addPoints(3) // note we add more points for better physics shape
   .center()
   .addPhysics(); // As of ZIM 017, Blob shapes can be either or both convex and concave

// zog(physics.validate(blob))

new Circle(50,red).loc(200,200).addPhysics();

PARAMETERS dynamic - (default true) - set to false to not move the physics body (static) contract - (default 0) - make the physics body smaller (or bigger with negative) than bounds shape - (default object shape) - "rectangle" for any object other than Circle, Dial and Triangle but can specify a "circle" for a Sprite or Bitmap, for instance - to try and match shape custom polygon bodies can also be made with manual Box2D and then use physics.addMap() but the only shapes available automatically are "rectangle", "circle", "triangle" Note - addPhysics() can be placed on a ZIM Blob as well friction - (default .8) - how sticky will the body act - set to 0 to slide. linear - (default .5) - linear damping which slows the movement - set to 0 for no damping angular - (default .5) - angular damping which slows the rotation - set to 0 for no damping density - (default 1) - the density that can affect what happens with collisions bounciness - (default 0) - how bouncy the object is - 0 is not bouncy 4 is crazy bouncy (was restitution) maskBits - (default null) - used with categoryBits to determine which bodies will collide with which other bodies as soon as maskBits is specified, the body will collide only with the categoryBits provided to the maskBits parameter 1 will collide with bodies that do not have categoryBits specified including the borders to test collision with bodies that have categoryBits specified, use the pipe (|) as follows: 1|2 will also collide with bodies having categoryBits of 2 specified so if another body has categoryBits of 4 then the bodies would not collide. 1|2|4 would also collide with 4 but not bodies with categoryBits of 8, etc. 2|4 would pass through any bodies without categoryBits of 2 or 4 including the borders categoryBits - (default 1) - a collision category - by default, bodies are in category 1 use with maskBits to say which bodies will collide with which other bodies the values are bit fields https://en.wikipedia.org/wiki/Bit_field so can have the following values: can be 2, 4, 8, 16, 32, 64, 128, 256, etc. up to 15 powers of 2 physics - (default zimDefaultPhysics) restitution - (default bounciness) - replaced by bounciness - kept for backwards compatibility sensor - (default false) - set to true to turn object into a sensor - will not interact but will report contact this is like a Box2D hitTest for non contacting object see also physics.contact() RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

obj.removePhysics()

removePhysics zim DisplayObject method DESCRIPTION Remove Physics from a DisplayObject. This removes various methods and properties that addPhysics() added The object can be added back to the physics world with addPhysics() EXAMPLE

obj.removePhysics(); // ;-)

RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.hitTestPoint(x, y, boundsCheck)

hitTestPoint zim DisplayObject method DESCRIPTION See if shape of obj is hitting the global point x and y on the stage. EXAMPLE

const circle = new Circle().loc(100,100).drag();
circle.on("pressmove", ()=>{
   if (circle.hitTestPoint(W/2, H/2)) {
      if (circle.alpha == 1) {
         circle.alpha = .5;
         S.update();
      }
   } else {
      if (circle.alpha == .5) {
         circle.alpha = 1;
         S.update();
      }
   }
});

PARAMETERS x and y - the point we are testing to see if it hits the shape of the object boundsCheck (default true) do a bounds check first (faster) but if bounds are wrong - might not work RETURNS a Boolean true if hitting, false if not CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

obj.hitTestReg(other, boundsCheck)

hitTestReg zim DisplayObject method DESCRIPTION See if the shape shape of an object is hitting the registration point of object (other). EXAMPLE

const circle = new Circle(50, red).center().drag();
const rect = new Rectangle(100, 100, blue).loc(100,100);
circle.on("pressmove", ()=>{
   if (circle.hitTestReg(rect)) {
      S.removeChild(rect);
      S.update();
   }
})

PARAMETERS other - the object whose registration point we are checking against boundsCheck (default true) do a bounds check first (faster) but if bounds are wrong - might not work RETURNS a Boolean true if hitting, false if not CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

obj.hitTestRect(other, num, boundsCheck, inside)

hitTestRect zim DisplayObject method DESCRIPTION See if a shape of an object is hitting points on a rectangle of another object. The rectangle is based on the position, registration and bounds of object (other). num is how many points on the edge of the rectangle we test - default is 0. The four corners are always tested as well as the very middle of the rectangle. EXAMPLE

const circle = new Circle(50, red).center().drag();
const rect = new Rectangle(100, 100, blue).loc(100,100);
circle.on("pressmove", ()=>{
   if (circle.hitTestRect(rect)) {
      S.removeChild(rect);
      S.update();
   }
});

PARAMETERS other - the object whose bounding rectangle we are checking against num - (default 0) the number of points along each edge to check 1 would put a point at the middle of each edge 2 would put two points at 1/3 and 2/3 along the edge, etc. there are always points at the corners and one point in the middle of the rectangle boundsCheck (default true) do a bounds check first (faster) but if bounds are wrong - might not work inside (default false) check if other object is completely inside shape RETURNS a Boolean true if hitting, false if not CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

obj.hitTestCircle(other, num, boundsCheck, inside)

hitTestCircle zim DisplayObject method DESCRIPTION See if the shape of an object is hitting points on a circle of another object. The circle is based on the position, registration and bounds of object (other). num is how many points around the circle we test - default is 8 Also checks center of circle hitting. EXAMPLE

var circle = new Circle(50, red).center().drag();
var triangle = new Triangle(100, 100, 100, blue).loc(100,100);
circle.on("pressmove", function() {
   if (triangle.hitTestCircle(circle)) {
      S.removeChild(triangle);
      S.update();
   }
});

PARAMETERS other - the object whose circle based on the bounding rect we are using num - (default 8) the number of points evenly distributed around the circle and one point in the middle of the circle boundsCheck (default true) do a bounds check first (faster) but if bounds are wrong - might not work inside (default false) check if other object is completely inside shape RETURNS a Boolean true if hitting, false if not CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

obj.hitTestCircleRect(other, margin)

hitTestCircleRect zim DisplayObject method DESCRIPTION Uses an equation to see if a circlular object is hitting the rectangle of another object. DO NOT use with a rotated rectangle object - for that use hitTestRect() or hitTestCircle(). This is faster than hitTests on shapes - so will have the speed of hitTestBounds, hitTestCircles and hitTestGrid. The circle is based on a the object radius if there is one and if no radius then the average of the width and height divided by two. A margin parameter is provided to tweak the hitTest The rect is based on the bounds of the second object projected globally as a rectangle If the second object bounds are rotated, the global bounds will be bigger to keep parallel to the axes EXAMPLE

const ball = new Circle(50, red).center().drag();
const box = new Rectangle(100, 100, blue).loc(100,100);
ball.on("pressmove", ()=>{
   if (ball.hitTestCircleRect(box)) {
      zog("points!");
   }
});

PARAMETERS other - the object whose bounds are used to see if circle shape is hitting margin (default 0) pixels the distance between the circle and the bounds is increased or decreased to effect the hit RETURNS a Boolean true if hitting, false if not CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.hitTestCircles(other, margin)

hitTestCircles zim DisplayObject method DESCRIPTION Uses an equation to see if two circles are intersecting. This is faster than hitTests on shapes - so will have the speed of hitTestBounds and hitTestGrid. The circles are based on the bounds of the two objects - it does not matter on which object the method is placed. If the bounds are not square then half the average length of the sides is used as the radius. A margin parameter is provided to tweak the hitTest EXAMPLE

const ball = new Circle(50, red).center().drag();
const basket = new Circle(100, blue).loc(100,100);
ball.on("pressmove", ()=>{
   if (ball.hitTestCircles(basket)) {
      zog("points!");
   }
});

PARAMETERS other - the object whose circle based on the bounding rect we are using margin (default 0) pixels the distance between circles is increased or decreased to effect the hit RETURNS a Boolean true if hitting, false if not CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

obj.hitTestBounds(other, margin, boundsShape)

hitTestBounds zim DisplayObject method DESCRIPTION See if obj.getBounds() is hitting other.getBounds(). Margin can be adjusted to tweak the hitTest. Pass in a boundsShape shape if you want a demonstration of where the bounds are. EXAMPLE

const circle = new Circle(50, red).center().drag();
const rect = new Rectangle(100, 100, blue).loc(100,100);
circle.on("pressmove", ()=>{
   if (circle.hitTestBounds(rect)) {
      S.removeChild(rect);
      S.update();
   }
});

PARAMETERS other - another object whose rectanglular bounds we are testing margin (default 0) shifted distance in pixels before hit is counted - can be positive or negative boundsShape - (default null) an empty Shape or createjs.Shape you would need to add the boundsShape to the stage RETURNS a Boolean true if hitting, false if not CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

obj.hitTestPath(other, num, showPoints, returnPoints)

hitTestPath zim DisplayObject method DESCRIPTION See if the shape of an object is hitting points on a path of a Squiggle or Blob. num is how many points between each point on the path we test - default is 2 SEE: https://zimjs.com/hittestpath.html EXAMPLE

const path = new Blob().center();
const circle = new Circle(50, purple).pos(100,100).drag();
circle.on("pressmove", ()=>{
   if (circle.hitTestPath(path, 3, true)) {
      circle.alpha -= .02;
      S.update();
   }
});

PARAMETERS other - the path (Squiggle or Blob) to test to see if the object shape is hitting num - (default 2) the number of points added to the path roughly between each point this gets totalled - so num*numPoints and then distributed along the path showPoints (default false) will draw small circles along the path where the hits will be tested returnPoints (default false) set to true to return an array of {x,y} points that are hitting (or false) returnPercent (default false) set to true to return a percent along the path the first hit occurs - unless overridden by returnPoints RETURNS a Boolean true if hitting (or an array of {x,y} points if returnPoints is true), false if not CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

obj.hitTestGrid(width, height, cols, rows, x, y, offsetX, offsetY, spacingX, spacingY, local, type)

hitTestGrid zim DisplayObject method DESCRIPTION Converts an x and y point to an index in a grid. If you have a grid of rectangles, for instance, use this to find out which rectangle is beneath the cursor. This technique will work faster than any of the other hit tests. EXAMPLE

const tile = new Tile(new Rectangle(100,100),5,4,10,10).center();
const circle = new Circle(10,green).pos(10,10).drag();
circle.on("pressmove", ()=>{
   var index = tile.hitTestGrid(tile.width, tile.height, 5, 4, circle.x, circle.y,0,0,10,10);
   zog(index);
});

PARAMETERS width and height - the overall dimensions cols and rows - how many of each (note it is cols and then rows) x and y - where you are in the grid (eg. e.stageX and e.stageY) offsetX and offsetY - (default 0) the distances the grid starts from the origin of the obj spacingX and spacingY - (default 0) spacing between grid cells null will be returned if x and y within spacing unless the type is set to "open" spacing is only between the cells and is to be included in the width and height (but not outside the grid) local - (default false) set to true to convert x and y to local values type - (default index) which means the hitTestGrid returns the index of the cell beneath the x and y point starting with 0 at top left corner and counting columns along the row and then to the next row, etc. set type to "col" to return the column and "row" to return the row set to "array" to return all three in an Array [index, col, row] set to "open" allow x and y to be in spacing and still return Array [index, col, row] these will report depending on less than half the spacing or more than half the spacing between cells RETURNS an index Number (or undefined) | col | row | an Array of [index, col, row] CLOSE ▲PAGE ▤CODE ▤BITS

CLOSE ▲

obj.animate(props, time, ease, call, params, wait, waitedCall, waitedParams, loop, loopCount, loopWait, loopCall, loopParams, loopWaitCall, loopWaitParams, loopPick, rewind, rewindWait, rewindCall, rewindParams, rewindWaitCall, rewindWaitParams, rewindTime, rewindEase, startCall, startParams, animateCall, animateParams, sequence, sequenceCall, sequenceParams, sequenceReverse, sequenceRatio, ticker, cjsProps, css, protect, override, from, set, id, events, sequenceTarget, dynamic, drag, clamp, startPaused, clean, obj, seriesWait, sequenceWait, rate, pauseOnBlur, easeAmount, easeFrequency, timeUnit, timeCheck, noAnimateCall, pathDamp)

animate zim DisplayObject method powered by createjs.Tween (TweenJS) DESCRIPTION Animate object properties in time (s). You can set various types of easing like bounce, elastic, back, linear, sine, etc. Handles callbacks, delays, loops, rewinds, relative, series and sequences of animations. SEE: https://zimjs.com/animation Shape Animation ZIM animate() lets you animate one Squiggle to another or one Blob to another See the props parameter under the convenience properties for shape and blobShift Advanced Animation ZIM animate() lets you animate along a path made with a zim Squiggle or Blob These paths can be edited by the user and the animation will still work The paths themselves can be animated or wiggled. Orient and Flipping are available. Dynamic speed can be set with percentSpeed and tied in to Accelerator and MotionController. Scrubbing animation and path animation is also supported with percentComplete. This can be used with a Slider, Dial, MotionController, Parallax or general coding. Dragging along a path is as easy as setting the drag parameter to true. This can be done with while animating or with the animation paused. ZIM EXTRA! provides animation based on animation. This allows for setting zoom, depth, speed, fade, etc. based on target y value while animating on a path but EXTRA! also opens up endless possibilities as the input and output does not have to be the target. This means that animation can also control properties of other objects. SEE: https://zimjs.com/nio/ NOTE to temporarily prevent animations from starting set ANIMATE to false NOTE see pauseAnimate(state, ids) and stopAnimate(ids) for controlling tweens when running NOTE set mouseEnabled of target before calling animate as animate itself sets mouseEnabled and then resets to original after a delay EXAMPLE

const circle = new Circle(50, red)
   .center()
   .alp(0)
   .sca(0)
   .animate({alpha:1, scale:1}, .7, null, done);
   
function done(target) {
   // target is circle if params is not set
   target.drag();
}

// or with ZIM DUO and from parameter:
const circle = new Circle(50, red)
   .center()
   .animate({
      props:{alpha:0, scale:0},
      time:.7,
      from:true
   });

// note: there was no need to set alpha and scale to 0 before the animation
// because from will animate from property values in props {alpha:0, scale:0}
// to the present set values - which are 1 and 1 for the default scale and alpha.
// This allows you to place everything how you want it to end up
// and then easily animate to this state.
// An extra advantage of this is that you can use the ANIMATE constant to skip animations while building
// See the https://zimjs.com/ornamate.html example

// RELATIVE animation
// rotate the rectangle 360 degrees from its current rotation
rectangle.animate({rotation:"360"});

// pulse circle
var circle = new Circle(50, red)
   .center()
   // pulse circle from scale 0 - 1 every second (use ZIM DUO)
   .animate({
      props:{scale:0},
      time:.5,
      loop:true,
      rewind:true,
      from:true
   });
// toggle pause the circle when stage is pressed
S.on("stagemousedown", ()=>{
   circle.pauseAnimate(!circle.paused);
});

EXAMPLE

// using ZIM VEE value:
// this will animate the alpha to between .5 and 1 in either 1 second or 2 seconds
circle.animate({alpha:{min:.5, max:1}}, [1, 2]);

EXAMPLE

// Dynamic Animation
const rect = new Rectangle(200,200,red)
   .centerReg()
   .animate({
      props:{rotation:360},
      loop:true,
      time:2,
      ease:"linear",
      dynamic:true,
      set:{percentSpeed:0} // no speed to start
   });

// example using a Slider to set speed from 0 to 5 times as fast
const slider = new Slider(0,500)
   .pos(100, 100)
   .change(()=>{
      rect.percentSpeed = slider.value;
   });

// example using an Accelerator and MotionController
// to set speed from -200 to 200 percent
// depending on mouse position
// multiple targets including Dynamo and Scroller objects can be added to Accelerator
// if adding multiple objects, use an array new Accelerator([rect, otherObject, anotherObject])
new MotionController({
   target:new Accelerator(rect),
   type:"mousemove",
   minPercentSpeed:-200,
   maxPercentSpeed:200
});

EXAMPLE

// Series example animating a circle in square formation
// Also showing that the series can include multiple targets
// Click on the stage to pause or unpause the animation

const rect = new Rectangle({color:pink})
   .centerReg()
   .sca(0); // hiding it to start

const circle = new Circle({color:purple}) // chaining the rest
   .pos(400,300)
   .animate({ // circle will be the default object for the inner animations
      props:[
         // an array of animate configuration objects
         {props:{x:600, y:300, scale:2}},
         {props:{x:600, y:500, scale:1}, call:function(){zog("part way");}},
         {props:{x:400, y:500}, time:.5, ease:"quadInOut"},
         {target:rect, props:{scale:3}, time:1, rewind:true, ease:"quadInOut"},
         {props:{x:400, y:300}}
      ],
      time:1, // will be the default time for the inner animations
      ease:"backOut", // will be the default ease for the inner animations
      id:"square", // will override any id set in the inner animations
      loop:true,
      loopCount:3,
      // note - no rewind or from parameters
      call:() => {zog("done");}
   });

   var paused = false;
   S.on("stagemousedown", ()=>{
         paused = !paused;
         pauseAnimate(paused, "square");
   });

EXAMPLE

// sequence example to pulse two circles
const circles = new Container(W, H).addTo();
const circle1 = new Circle(50, red).center(circles);
const circle2 = new Circle(50, blue).center(circles).mov(70);
circles.animate({
   props:{scale:1},
   time:.5,
   loop:true,
   rewind:true,
   from:true,
   sequence:.5
});

EXAMPLE

// animate() can animate any object property
// just use the animate function and pass in the object as the first parameter:

const obj = {age:10}
animate(obj, {age:20}, 1);
interval(.05, ()=>{
   zog(obj.age);
});

// or if you have a THREEJS mesh
// use quotes to animate a dot property:
animate(mesh, {"rotation.y":360*RAD}, 50);

// or CSS properties - see the CSS parameter for setup info
zss("tagID").opacity = 1; // set this even if it is default
animate(zid("tagID"), {opacity:0}, 2); // etc.

EXAMPLE

// Animate along a Squiggle or Blob path
// see https://zimjs.com/nio/ examples
// see https://zimjs.com/explore/squiggleAnimate.html for more
// see https://zimjs.com/explore/blobAnimate.html for more
// see https://zimjs.com/explore/blobAnimate2.html for more
const line = new Squiggle().center();
new Circle(10, red).addTo().animate({path:line}, 1);

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports VEE - parameters marked with ZIM VEE mean a zim Pick() object or Pick Literal can be passed Pick Literal formats: [1,3,2] - random; {min:10, max:20} - range; series(1,2,3) - order, function(){return result;} - function props - the object literal holding properties and values to animate Basic examples: {x:200} or {rotation:360, alpha:0} or {scale:4} or {x:300, y:300, scale:"2"} (relative scale) There are custom options below including Convenience, ZIM VEE, Relative, and Series properties. ** Before ZIM 7.1, this parameter was called obj - as to not conflict with CreateJS TweenJS props (now renamed cjsProps) obj is still available as a parameter name for backwards compatibility when using a ZIM DUO configuration object CONVENIENCE PROPERTIES scale - for scaleX and scaleY color - on ZIM shapes for setColorRange() and animate colorRange from 0-1 ** this property cannot be run in a series - rather animate in a call function to accomplish a series of color changes note - animate from one note to another when animating a ZIM Synth tone() note ("A", "C2", "C#" or "Bf", etc.) is coverted to frequency shape - animate from one ZIM Squiggle to another or one ZIM Blob to another for now, the matching Sqiggle or Blob must have the same number of points to pause or stop a shape tween use the animate id parameter blobShift - a number of points to shift the points of a Blob in clockwise direction this is when using a shape tween that is a Blob - can be negative path - pass in a Blob or Squiggle to animate along path https://zimjs.com/nio/path.html If the shape has lockControls set to false (the default) then the animation will be dynamic and adjust as the shape is changed. If a set animation path is desired then set the shape's lockControls to true NOTE: Do not re-amimate an object that is being animated on a path use a Container and animate the container on the path and animate the object inside the container - otherwise percentComplete conflicts startPercent - (default 0) set to a percent for where to start the target animating ZIM Bead objects will be given a startPercent that matches their start percentage currently not supported when dragging on path - it is very complicated percent - (default 100) how much percent to animate from the startPercent by default, the target will travel once along the path from its start position (startPercent) this can be less than the startPercent to make animation travel backwards on the path the percent can also be bigger than 100 as well as less than 0 so a percent:300 will travel three times along the path - and then rewind if rewind is set and a percent of -150 will travel one and half times backwards along the path from the startPercent currently not supported when dragging on path - it is very complicated orient - an object with x and y to aim the target at https://zimjs.com/nio/orient.html when a path is used this will default to rotate to orient to path (for a Sprite, add the Sprite to a Container and animate the Container) can set to false for no rotation can set to any object with an x, y point such as a circle on the stage - or {x:0, y:0} or a new zim Point, etc. flip - default true when orient is true true will flip the object horizontally when its x direction goes negative https://zimjs.com/nio/flip.html this will also work with orient to make sure the target is not upside down if object is pre-rotated then 90,-90,270 should work as ZIM will swap the the scaleX and scaleY but any unusual starting angles may not flip as desired - so put these in a Container and animate the container flipVertical - setting flipVertical to true will flip the object vertically when its y direction goes negative this will also work with orient to make sure the target is not upside down EXTRA! - the following convenience properties are available for ZIM EXTRA! (also see extra below) https://zimjs.com/nio/extra.html zoom - an array that represents scale proportions based on target's y position [inputMin, inputMax, outputMin(default 0), outputMax(default H)] the outputs will be constrained to the provided values zoom:[.5,1.5] scales the target based on its y position - animating y or along a path will show scaling zoom:10 - is like zoom:[0,10] zoom:true - is like zoom:[0,1] zoom:[1,3,H/2-100,H/2+200] would scale from 1 to 3 in this region and stay at 1 or 3 outside this region speed - an array that represents animation percentSpeed based on target's y position [inputMin, inputMax, outputMin(default 0), outputMax(default H)] the outputs will be constrained to the provided values speed:[20,100] sets percentSpeed based on target y position - animating y or along a path will have changing speed speed:40 - is like speed:[0,40] speed:true - is like speed:[0,100] ** will set dynamic property to true - as percentSpeed needs dynamic property set to true layer - an array that represents ratio of layer proportions based on target's y position [inputMin, inputMax, outputMin(default 0), outputMax(default H)] the outputs will be constrained to the provided values layer:[0,1] sets current layer based on target y position - animating y or along a path will have changing layers layer:1 - is like layer:[0,1] layer:true - is like layer:[0,target.parent.numChildren-1] fade - an array that represents ratio of alpha based on target's y position [inputMin, inputMax, outputMin(default 0), outputMax(default H)] the outputs will be constrained to the provided values fade:[.5,1] sets current alpha based on target y position - animating y or along a path will have changing alpha fade:1 - is like fade:[0,1] fade:true - is like fade:[0,1] fade:[0,1,H/2-100,H/2+200] - would change alpha in this y region extra - in addition to the convenience properties above, ZIM EXTRA! has a more general and complete format: Pass in a single EXTRA! object or an array of EXTRA! objects: extra:{} or extra:[{},{},{}] The object has the following properties - all are optional except the outputProp which is required: |ZIM VEE| - each object below optionally accepts a ZIM VEE value for Pick.choose() to pick randomly from inputObj - (default target) - the object with the input property - probably the animation target but could be any object inputProp - (default "y") - a string of the property name for the input - "x", "rotation", etc. inputMin - (default 0) - the minimum input value for the calculation - also see constrain inputMax - (default W if x inputProp else H) - the maximum input value for the calculation - also see constrain outputObj - (default target) - the object whose output property is being changed - probably the animation target but could be any object outputProp - (default "scale") - a string of the property name of the output - "scale", "layer", "rotation", etc. outputMin - (default 0) - the minimum output value for the calculation - also see constrain outputMax - (default 1) - the maximum output value for the calculation - also see constrain factor - (default 1) setting factor to -1 will reverse the direction of the animation outputRound - (default false) set to true to receive rounded output values constrain - (default true) constrain the output value to outputMin and outputMax set to false to let values go beyond provided mins and maxes this is quite usual when a proportion is easily figured at a certain range and continued increase or decrease is desired outside the range - just turn constrain to false. EXAMPLES: extra:{outputProp:"scaleX"} would animate the scaleX of the target from 0-1 over the stage height extra:{outputObj:circle, outputProp:"alpha"} would animate the alpha of circle based on the animated target's y position extra:{inputObj:circle, inputProp:"x", inputMax:W, outputProp:"level"} would animate the target's child index as the circle's x goes across the screen ** in the last two examples, circle is a different object than the target of the animation - circle might be animating independently or based on a Slider value, etc. |ZIM VEE| - each props property value optionally accepts a ZIM VEE value for Pick.choose() to pick randomly from (except the EXTRA! properties which accept ZIM VEE values inside) these will be picked again if the loopPick parameter is true (default false) RELATIVE VALUES: you can pass in relative values by putting the numbers as strings rotation:"360" will animate the rotation of the object 360 degrees from its current rotation whereas rotation:360 will animate the rotation of the object to 360 degrees DOT PROPERTIES: you can animate properties on properties using quotes: Here is animate used as a function to animate a threejs mesh animate(mesh, {"rotation.y":360*RAD}, 5000); note that the from parameter is not currently supported with dot properties (difficult bug) CSS PROPERTIES: animate can animate CSS properties ZIM's CreateJS 1.3.2 has the CreateJS CSS Pluging installed Set the css parameter to true and see the CSS parameter for more details ANIMATION SERIES: if you pass in an array for the props value, then this will run an animation series The array must hold animate configuration objects: [{props:{scale:2}, time:1, rewind:true}, {target:different, props:{x:100}}, etc.] If you run animate as a method on an object then this is the default object for the series but you can specify a target to override the default By default, each animation runs after the other, but a negative wait can be set eg. if wait:-1 is set on the third animation in the series it starts 1 second before the second animation ends The default time and tween are as provided in the main parameters but you can specify these to override the default The id of the main parameters is used for the whole series and cannot be overridden The override parameter is set to false and cannot be overridden All other main parameters are available except rewind, sequence and from (rewind and from are available on the inner tweens - for sequence: the initial animation is considered) You currently cannot nest animation series Note: if any of the series has a loop and loops forever (a loopCount of 0 or no loopCount) then this will be the last of the series to run Note: color cannot be animated in a series - rather animate in a call function to accomplish a series of color changes Note: a sequence cannot be seriesed and a series cannot be sequenced time - |ZIM VEE| (default 1) the time for the tween in seconds (also see ZIM TIME constant) see also the rate parameter and property to dynamically change the time the animation takes (its speed) ease - |ZIM VEE| (default "quadInOut") the equation type for easing ("bounceOut", "elasticIn", "backInOut", "linear", etc) no ease is "linear" or "none"- this is often good for constantly falling or rotating objects also ZIM preset eases: "snapIn", "snapOut", "snapInOut", "ballisticIn", "ballisticOut", "ballisticInOut", "slowmoIn", "slowmoOut", "slowmoInOut" ** CUSTOM EASE: see https://zimjs.com/ease for custom ease which can be passed in here as a value like so: ease:zimEase([.2,.4,.6,.8]) // would be linear ease:zimEase([[1.45,-0.57,0.67,0.55], [0.34,0.44,1.43,-0.31]]) // is the same as "snapInOut" // see the zimEase() function in the docs for the Code module see CreateJS easing: https://www.createjs.com/docs/tweenjs/classes/Ease.html also see easeAmount and easeFrequency parameters to adjust certain eases like back and elastic call - (default null) the function to call when the animation is done params - (default target) a single parameter for the call function (eg. use object literal or array) wait - |ZIM VEE| (default 0) seconds to wait before doing animation can be negative for series to start animation before previous animation ends waitedCall - (default null) calls function after wait is done if there is a wait waitedParams - (default target) parameters to send waitedCall function loop - (default false) set to true to loop animation loopCount - |ZIM VEE| (default 0) if loop is true how many times it will loop (0 is forever) loopWait - |ZIM VEE| (default 0) seconds to wait before looping - will automatically set loop to true loopCall - (default null) calls function after loop and loopWait (not including last loop) loopParams - (default target) parameters to send loopCall function loopWaitCall - (default null) calls function after at the start of loopWait loopWaitParams - (default target) parameters to send loopWaitCall function loopPick - (default false) remake any ZIM VEE (Pick) props for the next loop (thanks GSAP) rewind - |ZIM VEE| (default false) set to true to rewind (reverse) animation (doubles animation time) rewindWait - |ZIM VEE| (default 0) seconds to wait in the middle of the rewind rewindCall - (default null) calls function at middle of rewind after rewindWait rewindParams - (default target) parameters to send rewindCall function rewindWaitCall - (default null) calls function at middle of rewind before rewindWait rewindWaitParams - (default target) parameters to send rewindCall function rewindTime - (default time) set the time in seconds for the rewind portion of an animation rewindEase - (default null) overwrite the ease for the rewind direction this assumes that In is at the start of the rewind and Out is at the end of the rewind so setting rewindEase:"bounceOut" will bounce back at the start of the animation note - setting ease:"bounceOut" will bounce at the end of the animation this allows for a normal start with a bounce and then a normal start at rewind and a bounce startCall - (default null) calls function at the start of actual animation and after any wait (and waitedCall) this is basically the same as the waitedCall but will also be called at the start of animation when there is no waitedCall startParams - (default target) parameters to send startCall function animateCall - (default null) calls function every animation this runs an alternate Ticker so does not aversely affect animate without an animateCall alternatively, can set events:true and capture an "animation" event - but that is only for animations on ZIM objects wherease animateCall will always be available for instance, if using the animate() function on object literals, HTML/CSS tags or threejs objects, etc. animateParams - (default target) parameters to send animateCall function sequence - (default 0) the delay time in seconds to run on children of a container or an array of target animations with the addition of ZIM VEE object to the target, you must noPick the array for example, target = container or target = {noPick:[a,b,c]} and sequence = 1 would run the animation on the first child and then 1 second later, run the animation on the second child, etc. or in the case of the array, on element a and then 1 second later, element b, etc. If the loop prop is true then sequenceCall below would activate for each loop For an array, you must use the zim function with a target parameter - otherwise you can use the ZIM 4TH method Note: a sequence cannot be seriesed and a series cannot be sequenced Note: for a sequence animate() give the animate() an id and pauseAnimate() or stopAnimate() that id. sequenceCall - (default null) the function that will be called for each sequence animation Note: the value of the sequenceCall parameter will be the object that just ended animation unless there is a sequenceParams value sequenceParams - (default null) a parameter sent to the sequenceCall function sequenceReverse - |ZIM VEE| (default false) set to true to sequence through container or array backwards sequenceRatio - (default null) set to a value to adjust the rate based on item ratio property see https://zimjs.com/016/normalize.html see Container() ratio property and normalize() method which give a ratio property. This will automatically set sequence to 0 so that each item in the container (or tile) is animated individually the sequenceRate value will be multiplied by the item's ratio and then added to the rate (see rate parameter) So if the sequenceRate is 2 and the rate is the default 1, then an item with a ratio property of 0 would be at rate 1 and items with a ratio property of .5 would be at rate 1+2*.5 = 2 and items with a ratio property of 1 would be at rate 1+2*1 = 3 ticker - (default true) set to false to not use an automatic Ticker function cjsProps - (default {override: true}) legacy - allows you to pass in CreateJS TweenJS configuration properties css - (default false) set to true if there is no Frame ZIM's CreateJS 1.3.2 has the CreateJS CSS Pluging installed But other CreateJS versions will need the plugin available here: https://d309knd7es5f10.cloudfront.net/CSSPlugin01.js Add that at the top of your code in a script tag and at the top of the main script install: createjs.CSSPlugin.install(); <script> // other versions of CreateJS need to import and install CSS Plugin // createjs.CSSPlugin.install(); // the property must be set before you can animate zss("tagID").opacity = 1; // set this even if it is default animate(zid("tagID"), {opacity:0}, 2); // etc. // for transform styles use: zss("tagID").transform = "translate(20px, 30px)"; // set this even if it is default animate({ target:zid("tagID"), props:{transform:"translate(100px, 150px)"}, time:2, loop:true, rewind:true }); </script> protect - (default false) protects animation from being interrupted before finishing unless manually interrupted with stopAnimate() protect will default to true if loop or rewind parameters are set but this can be overriden if protect is set to false override - (default true) subesequent tweens of any type on object cancel all earlier tweens on object set to false to allow multiple tweens of same object from - |ZIM VEE| (default false) set to true to animate from obj properties to the current properties set on target note that from is not supported with dot properties such as "rotation.x" with threejs (a difficult bug) set - |ZIM VEE| (default null) an object of properties to set on the target to start (but after the wait time) id - (default null) set to String to use with pauseAnimate(state, id) and stopAnimate(id) - thanks Sean Berwick for typo catch series animate gets only one overall id - so no id per animation object events - (default false) set to true to receive an "animation" event on the target (or Container with a Container sequence) sequenceTarget - (default null) used internally for processing sequence animations dynamic - (default false) set to true to turn on dynamic speed animation via the percentSpeed property setting perecentSpeed (default 100) will adjust the speed of the animation to change speed with a Slider, Dial, MotionController, Accelerator, etc. use target.animate({props:{rotation:360}, dynamic:true, set:{percentSpeed:0}}); to start off with no animation drag - (default false) used with path in props to drag along path This can be done while animating or while the animation is paused Setting drag to true will set startPaused to true as well - set startPaused to false to animate and drag With rewind set, drag lets you change the direction of an animation while animating To turn drag off use the pause() method that animate() adds to the target clamp - (default true) used with dynamic and non-looping - set to false to let time pass beyond animation start and end startPaused - (default false - true if drag is true) Boolean - set to true to start the animation in the paused state Good for animating manually with the percentComplete property clean - (default true) set to false to not delete animation ids etc. at end of animate() Could then use percentComplete to position tween and pauseTween(false) to start animating again Note... once tween has waited, percentComplete does not include wait period So clean cannot be used to restart an animation with a wait after the animation has waited Use the replayTween() method of the target to restart the latest animation on a target NOTE: clean will be set to true if loop is true (even if loopCount is set) So to scrub after a loopCount of 2 then remake the animate() in the call callback with a pauseAnimate() obj - (depreciated) the old version of props - kept for backwards compatibility seriesWait - (internal) used internally to hold setting relative values in correct series order sequenceWait - (internal) used internally to tie sequence in to the animation chain for pauseAnimate and stopAnimate rate - |ZIM VEE| (default 1) change the speed at which the animation runs set to .5 to run at half the speed and 2 to run at twice the speed a ZIM VEE here will update each loop if loopPick is set to true to change the speed (time) of the animation for each loop pauseOnBlur - (default true) as of ZIM 10.8.0, animate defaults to pause all animations on blur blur is when the window is reduced or a different tab gains focus on the Browser animate uses requestAninationFrame which slows down when the window is not in focus this can cause animations to go out of sync - pauseOnBlur will prevent this Can also set zim.pauseAnimateOnBlur=false or true to change this at any time easeAmount - |ZIM VEE| (default null) set to change the tween effect Ease amounts are as follows: quad (default 2) - exponent - this is the default ZIM tween cubic (default 3) - exponent quart (default 4) - exponent quint (default 5) - exponent back (default 1.7) - strength elastic (default 1) - amplitude - also see easeFrequency linear/none, bounce, circ, sin - no affect Note: used mostly with back and elastic (backIn, backOut, backInOut, etc.) as setting the tween to quadInOut and then easeAmount to 5 would be the same as a quintInOut. easeFrequency - |ZIM VEE| (default .3 elasticIn and elasticOut or .3*1.5 elasticInOut) set to change the elastic ease frequency so tween:"elasticOut", easeFrequency:.2 is a faster elastic the time may also need to be increased or decreased as desired also see easeAmount where easeAmount:3 would be a larger elastic timeUnit - (default TIME) override the TIME setting to "seconds" / "s" or "milliseconds" / "ms" timeCheck - (default true) set to false to not have animate() warn of potentially wrong time units - see also TIMECHECK noAnimateCall - (default true) set to false to not call the callback function if ANIMATE is set to false pathDamp - (default .15) damping for drag along path PROPERTIES - zim.animate() adds the following properties to any object it animates: animating - read-only - true when animating (including when waiting) see paused (the opposite) and waiting properties paused - read-only - when animating, paused is set to false When paused with pauseAnimate() then paused is set to true When stopped or before animation, paused is undefined or null There is only one paused property per object so pausing a specific id on an object with multiple animations will set paused to true even if other animations are still running. Pausing multiple objects should work fine. See the tweenState property to test which ids are animating or paused For a sequence animate() give the animate() an id and pauseAnimate() or stopAnimate() that id. waiting - read-only - true when animation is waiting in wait, rewindWait, loopWait tweenState - an object with tween ids as properties along with an all property (unless no tweens anymore) these properties are true if animating and false if paused if all is true then all are animating except for the ids that hold false if all is false then all are not animating except for the ids that hold true this is used for pauseAnimateOnBlur to keep track of animations to set back to true when un-blurring percentSpeed - get or set the percent of the animation speed 100% is regular time, 50% is half as fast, 200% is twice as fast -100% is reverse normal speed, etc. use target.animate({props:{rotation:360}, dynamic:true, set:{percentSpeed:0}}); to start off with no animation rate - changes the speed of the animation with 1 as a ratio so 1 is the default speed (time), .5 would be half the speed, 2 twice the speed, etc. does what percentSpeed does by changing the CreateJS timeScale property this does not require dynamic to be set and is probably more efficient rate might also be affected by sequenceRate percentComplete - get or set percent complete (0-100) ** this allows you to scrub through an animation with a Slider, Dial, MotionController, etc. should probably set startPaused parameter of animate() to true Setting percentComplete to 100 may cause the animation to start at the beginning but can set rewind:true and then set percentComplete to 50 - this will animate "backwards" Can use animation event and a test of percentComplete to stop animation at a percentage see https://zimjs.com/explore/squigglepart.html ** NOTE: As of ZIM 015, percentComplete includes the wait time and spans across all animations on the object including animation series. A percentComplete has also been added to the CreateJS tweens for individual control. The individual tweens can be found in the zimTweens object or the latestTween will give access to the latest tween running. So for setting percentComplete on an animation with a wait you can access the latestTween in the waited call back function. METHODS - see pauseAnimate() and stopAnimate() under the METHODS module Also - zim.animate() adds a pause(state, time) method to the target IF dynamic is set to true (or drag is true) This matches the pause() of Dynamo and Scroller and is used by Accelerator state - (default true) true pauses and setting the state to false will unpause the dynamic animation time - (default 0) time in milliseconds to slow the animation down if pausing or speed it up if unpausing endTween(callType) - stops the animation and sets the target to the properties at the end of the tween - returns target for chaining callType defaults to "all" which will run the call function and all the call functions in a series setting callType to "none" will not run the call function and not run any call function in a series setting callType to "main" will run the call function but not the call functions in a series note: any remaining rewindCall and loopCall functions will not be called when using endTween() note: endTween is complicated with ids, multiple animations, series, sequences, etc. if there is a problem, try adding the target to a Container and controlling separate animations on container and target resetTween() - sets the target back to the state at the start of the last animate() call - returns target for chaining note: resetTween is complicated with ids, multiple animations, series, sequences, etc. if there is a problem, try adding the target to a Container and controlling separate animations on container and target replayTween() - resets and runs the last animate() on the target - calls the animate function with the same parameters as the last time - returns target for chaining note: replayTween is complicated with ids, multiple animations, series, sequences, etc. if there is a problem, try adding the target to a Container and controlling separate animations on container and target if there is a series with more than one target then replayTween will only work on the main target instead, store the series in an object literal: const mySeries = {animation object} and call obj.animate(mySeries) and then later call it again obj.animate({mySeries}) EVENTS - zim animate() will add an "animation" event to the target IF the events parameter is set to true (default is false) alternatively, see the animateCall and animateParams parameters of animate() or the "animation" event will be added to the Container for a sequence in a Container or the "animation" event is added to the targets of an animation series If dynamic is set to true, will dispatch a "pause" event when animate is paused - could be delayed but time passed in to pause() RETURNS the target for chaining (or null if no target is provided and run on zim with series) CLOSE ▲PAGE ▤CODE ▤TOUR😊BITS

VIDS

CLOSE ▲

obj.stopAnimate(ids, toEnd)

stopAnimate zim function - and Display object function DESCRIPTION Stops tweens with the passed in id or array of ids. If no id is passed then this will stop all tweens. The id is set when using animate() or a Sprite id parameter. An animation series will have the same id for all the animations inside. To stop a Shape tween, set an id in the animate call and use that id to stop the shape tween this is because the shape tween animation is not on the shape but on its many control points See also pauseAnimate() NOTE for a sequence animate() give the animate() an id and pauseAnimate() or stopAnimate() that id. NOTE formerly stopZimAnimate - which still works but is depreciated NOTE calling stopAnimate(id) stops tweens with this id on all objects calling object.stopAnimate(id) stops tweens with this id on the target object NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// We have split the tween in two so we can control them individually
// Set an id parameter to stop or pause
// You can control multiple tweens at once by using the same id (the id is for a tween set)
// Note the override:true parameter
const rect = new Rectangle(200, 200, pink)
   .centerReg()
   .animate({obj:{scale:2}, time:2, loop:true, rewind:true, id:"scale"})
   .animate({obj:{rotation:360}, time:4, loop:true, ease:"linear", override:false});
rect.cur("pointer");
rect.on("click", ()=>{rect.stopAnimate()}); // will stop all tweens on rect
// OR
rect.on("click", ()=>{rect.stopAnimate("scale");}); // will stop scaling tween

stopAnimate("scale") // will stop tweens with the scale id on all objects

stopAnimate(); // will stop all animations

PARAMETERS ids - (default null) pass in an id or an array of ids specified in animate, move and Sprite toEnd - (default false) set to true to call endTween() on targets to go to end of tween values warning: setting to true will make targets to go to the end of all their animations which could have the effect of ignoring ids for specific animations therefore stopping them as well PROPERTIES paused - zim.stopAnimate() will set paused property of stopped objects to null RETURNS null if run as stopAnimate() or the obj if run as obj.stopAnimate() CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

obj.pauseAnimate(state, ids)

pauseAnimate zim function - and Display object function DESCRIPTION Pauses or unpauses tweens with the passed in id or array of ids. If no id is passed then this will pause or unpause all tweens. The id is set as a animate, move, Sprite parameter. An animation series will have the same id for all the animations inside. To pause a Shape tween, set an id in the animate call and use that id to pause the shape tween this is because the shape tween animation is not on the shape but on its many control points See also stopAnimate NOTE for a sequence animate() give the animate() an id and pauseAnimate() or stopAnimate() that id. NOTE formerly pauseZimAnimate - which still works but is depreciated NOTE calling pauseAnimate(true, id) pauses tweens with this id on all objects calling object.pauseAnimate(true, id) pauses tweens with this id on the target object NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const circle = new Circle().center().animate({obj:{alpha:0}, loop:true, rewind:true});
circle.on("mousedown", ()=>{
   circle.pauseAnimate(!circle.paused);
});

EXAMPLE

// We have split the tween in two so we can control them individually
// Set an id parameter to stop or pause
// You can control multiple tweens at once by using the same id (the id is for a tween set)
// note the override:true parameter
const rect = new Rectangle(200, 200, pink)
   .centerReg()
   .animate({obj:{scale:2}, time:2, loop:true, rewind:true, id:"scale"})
   .animate({obj:{rotation:360}, time:4, loop:true, ease:"linear", override:false});
rect.cur("pointer");
rect.on("click", ()=>{rect.pauseAnimate()}); // will pause all tweens on rect
// OR
let paused = false;
rect.on("click", ()=>{
   paused = !paused;
   rect.pauseAnimate(paused, "scale");
}); // will toggle the pausing of the scaling tween

pauseAnimate(false, "scale") // will unpause tweens with the scale id on all objects

pauseAnimate(); // will pause all animations

PARAMETERS state - (default true) will pause tweens - set to false to unpause tweens ids - (default null) pass in an id or an array of ids specified in animate, move and Sprite PROPERTIES paused - zim.stopAnimate() will set paused property of paused objects to the value of the state parameter RETURNS null if run as pauseAnimate() or the obj if run as obj.pauseAnimate() CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

obj.wiggle(property, baseAmount, minAmount, maxAmount, minTime, maxTime, totalTime, type, ease, integer, id, startType, ticker, wait, pauseOnBlur, endOnStart)

wiggle zim DisplayObject method DESCRIPTION Wiggles the property of the target object between a min and max amount to either side of the base amount in a time between the min and max time. Uses animate() so to pause or stop the wiggle use pauseAnimate and stopAnimate either on the object or using an id that you pass in as a parameter NOTE calling pauseAnimate(true, id) pauses tweens with this id on all objects calling target.pauseAnimate(true, id) pauses tweens with this id on the target object EXAMPLE

const ball = new Circle().centerReg();
ball.wiggle("x", ball.x, 10, 100, .5, 1);
// wiggles the ball 10-100 pixels to the left and right of center taking .5-1 s each time

ball.pauseAnimate(); // will pause the wiggle

CLOSE ▲

obj.loop(call, reverse, interval, step, start, end, immediate, complete, completeParams)

loop zim DisplayObject method NOTE overrides earlier loop function with added container loop so that we can use earlier loop function without createjs DESCRIPTION The loop function (see the CODE module for loop) lets you loop through: 1. If you pass in a Number for obj then loop() does function call that many times 2. If you pass in an Array then loop() loops through the array 3. If you pass in an Object literal or ZIM Dictionary then loop() loops through the object 4. If you pass in an String then loop() loops through the letters 5. If you pass in an HTML NodeList or HTMLCollection then loop() loops through the tags The loop method lets you loop through a Container NOTE you can also pass the container as the first parameter of the loop function 6. The loop method loops through all the children of the container and does the function for each one passing the child, currentIndex, totalLoops, startIndex, endIndex, obj. So this is like for(i=0; i<obj; i++) {var child = obj.getChildAt(i);} loop or for (var i in container.children) {var child = container.children[i];} NOTE If you pass in true for reverse, the loop is run backwards counting to 0 (by default) NOTE use return to act like a continue in a loop and go to the next loop NOTE use return NEXT when in interval mode to go immediately to the next interval - as opposed to return which goes to next but after another interval NOTE return a value to return out of the loop completely like a break (and return a result if desired) EXAMPLE

var container = new Container().alp(.1).addTo();
// LOOP FUNCTION - for more examples see the CODE Module loop() function
loop(1000, i=>{ // gets passed an index i, totalLoops 1000, startIndex 0, endIndex 999, obj 1000
   // make 1000 rectangles
   new Rectangle().loc(rand(W-100), rand(H-100), container);
});

// LOOP METHOD
// loop through children of the container
container.loop((child, i)=>{ // gets passed the child, index, total, start, end and obj
   child.x += i*2;
   child.y += i*2;
}, true); // true would reverse - so highest in stack to lowest, with i going from numChildren-1 to 0

EXAMPLE

// looping with the interval setting

// loop through an array every 1 second
loop(10, i=>{zog(i);}, null, 1);

// loop through a Container every .01 seconds
const tile = new Tile(new Rectangle(26,26,[green, blue, pink]), 10, 10, -1, -1)
   .reg(CENTER)
   .pos(0,100,CENTER,BOTTOM)
   .loop(item=>{
      item.color = darker;
      S.update();
   }, null, .01);

PARAMETERS supports DUO - parameters or single object with properties below call - the function to call the function will receive (as its final parameters) the index, total, start, end, obj where the index is the current index, total is how many times the loop will run start is the start index, end is the end index and obj is the object passed to the loop the starting parameters vary depending on the type of obj: if the obj is a number then the first parameter is the index (no extra starting parameters given) if the obj is an array then the first parameter is the element at the current index if the obj is an object literal then the first and second parameters are the property name and property value at the current index if the obj is a string then the first parameter is the letter at the current index if the obj is a container then the first parameter is the child of the container at the current index if the obj is an HTMLCollection then the first parameter is the tag reverse - (default false) set to true to run the loop backwards to 0 interval - (default 0) set to a number of seconds between each loop use return NEXT to go immediately to the next interval use return to just leave current interval then wait another interval to continue return a value (other than NEXT) to exit the loop and clear the inverval the interval object is provided at the end of the loop function parameters - but will probably not be needed step - (default 1) each step will increase by this amount (positive whole number - use reverse to go backwards) start - (default 0 or length-1 for reverse) index to start end - (default length-1 or 0 for reverse) index to end immediate - (default true) set to false to not start the loop right away, but rather wait for a first interval complete (default null) - a callback function to call when complete completeParams (default null) - paramater to pass complete callback RETURNS any value returned from the loop - or true if no value is returned from a loop CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

obj.scaleTo(boundObj, percentX, percentY, type, boundsOnly, simple)

scaleTo zim DisplayObject method DESCRIPTION Scales object to a percentage of another object's bounds and scale Percentage is from 0 - 100 (not 0-1). Also see sca(), fit() and Layout(). NOTE currently supports rotated objects only for FIT mode and not for FILL or FULL. For rotated objects in FILL or FULL, put the rotated object in a Container and then scaleTo() the container WARNING: an error is happening when using scaleTo() in a resize event in FULL mode. Use the simple:true parameter to avoid errors - but may not work with rotated nested objects EXAMPLE

circle.scaleTo(stage, 50); // scale to half the W
circle.scaleTo(stage, 10, 20); // fit within these scalings of the stage

PARAMETERS - supports DUO - parameters or single object with properties below boundObj - the object that we are scaling to with percents below percentX - (default no scaling) the scale in the x percentY - (default no scaling) the scale in the y if both percentX and percentY are missing then assumes 100, 100 for each and type defaults to FILL rather than FIT type - (default FIT or FILL if no percent is provided) the scaling to match bounds Note: as of ZIM Cat 04 the constant FIT or the string "fit", etc. can be used Note: as of ZIM NFT the default is FILL if no percent and FIT if a percent is provided FIT: to keep proportion (aspect ratio) and fit within bounds (formerly "smallest") FILL: to keep proportion (aspect ratio) and fill the bounds (formerly "biggest") FULL: match bounds dimensions - may stretch object (formerly "both" or "stretch") boundsOnly - (default false) set to true to scale to the boundObj's bounds only - ignoring current boundObj scale simple - (default false) set to true to avoid errors specifically in resize event RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

obj.fit(left, top, width, height, type)

fit zim DisplayObject method DESCRIPTION Scale an object to rectangular dimensions and center it. Actually scales and positions the object. Object must have bounds set (setBounds()). EXAMPLE

circle.fit(100, 100, 200, 300); // fits and centers in these dimensions

PARAMETERS supports DUO - parameters or single object with properties below left, top, width, height - (default stage dimensions) the rectangle to fit type - (default FIT) the scaling to match rectangle dimensions Note: as of ZIM Cat 04 the constant FIT or the string "fit", etc. can be used FIT: to keep proportion (aspect ratio) and fit within rectangle FILL: to keep proportion (aspect ratio) and fill the rectangle FULL: match rectange dimensions - may stretch object RETURNS an Object literal with the new and old details (bX is rectangle x, etc.): {x:obj.x, y:obj.y, width:newW, height:newH, scale:scale, scaleX:scaleX, scaleY:scaleY, bX:left, bY:top, bWidth:width, bHeight:height} CLOSE ▲PAGE ▤CODE ▤BITS

CLOSE ▲

obj.boundsToGlobal(rect, flip, inside, globalObj)

boundsToGlobal zim DisplayObject method DESCRIPTION Returns a createjs Rectangle of the bounds of object projected onto the stage. Handles scaling and rotation. If a ZIM Boundary object (or CreateJS Rectangle) is passed in then it converts this rectangle from within the frame of the obj to a global rectangle. If flip (default false) is set to true it goes from global to local rect. Used by drag() and hitTestBounds() above - probably you will not use this directly. EXAMPLE

zog(circle.boundsToGlobal().x); // global x of circle

PARAMETERS rect - (default null) a ZIM Boundary() object or CreateJS Rectangle inside an object which you would like mapped to global flip - (default false) make a global rect ported to local values inside - (default false) [NOT WORKING YET] make a rectangle from smallest projection rather than largest globalObj - (default stage) project rectangle into a Container other than the stage RETURNS a createjs Rectangle of the bounds of object projected onto the stage CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.resetBounds(width||boundsX, height||boundsY, null||width, null||height, margin)

resetBounds zim DisplayObject method DESCRIPTION Pass in no parameters to reset the bounds to calculated bounds Pass in width and height to set bounds to (0,0,width,height) Pass in x, y, width and height to set bounds to (0,0,width,height) NOTE a container made with new Container() has auto calculated bounds so the bounds (and width and height) adapt to surround any new children's bounds A container set with bounds to start: new Container(100, 200) has static bounds so the bounds (and width and height) will not change as new children are added Calling container.resetBounds() with no parameter sets dynamic calculated bounds Or you can reset the static bounds with parameters. EXAMPLE

const container = new Container();
const rect = new Rectangle(500,300).addTo(container);
zog(container.width, container.height); // 500, 300 dynamic bounds

// OR

const container = new Container(100, 100);
const rect = new Rectangle(500,300).addTo(container);
zog(container.width, container.height); // 100, 100 static bounds

container.resetBounds();
zog(container.width, container.height); // 500, 300 dynamic bounds

container.resetBounds({margin:20});
zog(container.bounds); // -20, 20, 540, 340 static with margin

container.resetBounds(200, 200);
rect.removeFrom();
zog(container.width, container.height); // 200, 200 static bounds

PARAMETERS supports DUO - parameters or single object with properties below width - (default null) null will set dynamic bounds and the object will take on bounds of children if a Container setting a number for the width will set static bounds that do not change as objects are added height - (default width) the height of the bounds if there is a width supplied but no height then the height is set to the width setting these run obj.setBounds(boundsX,boundsY,width,height); OR if four parameters are set: boundsX - (default 0) the x of the bounds boundsY - (default 0) the y of the bounds width - (default null) the width of the bounds height - (default width) the height of the bounds if there is a width supplied but no height then the height is set to the width setting these run obj.setBounds(boundsX,boundsY,width,height); margin - (default 0) add margin to increase (or decrease if negative) bounds if used, this makes the bounds static rather than dynamic. RETURNS object for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.copyMatrix(source)

copyMatrix zim DisplayObject method DESCRIPTION Copies the transformation properties from the source to the obj (x, y, rotation, reg, scale and skew) NOTE used internally by animate() and setMask() for copying transform of shapes to mask also used in addDisplayMembers for clone() method EXAMPLE

circle.copyMatrix(circle2);
// circle will now match circle2 in x, y, rotation, scale and skew properties

PARAMETERS source - object from which the transform properties are being copied RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.duplicate(exact)

duplicate zim DisplayObject method DESCRIPTION clones the object but also any custom properties EXAMPLE

const circle = new Circle();
circle.custom = 345;
const circle2 = circle.duplicate();
zog(circle2.custom); // 345

RETURNS cloned object with cloned custom properties CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.expand(padding, paddingV, paddingRight, paddingBottom)

expand zim DisplayObject method DESCRIPTION Adds a createjs hitArea to an object with an extra padding of padding. Good for making mobile interaction better on labels, buttons, etc. Note: this will make the whole object a hitArea so objects inside will not dispatch mouse events. If that is required then use "holder" container that holds the expanded object and put the other target object on top of the expanded object but inside the holder container. EXAMPLE

const circle = new Circle(10, red)
   .center()
   .expand(); // makes hit area bigger
circle.on("click", ()=>{zog("yes");});

PARAMETERS - accepts ZIM DUO - regular parameters or a single configuration object ** one parameter for all padding ** two parameters for left/right and top/bottom ** four parameters for left/top/right/bottom with any blank to receive default 20 padding - (default 20) how many pixels to expand bounds paddingV - (default null) the vertical padding (making padding for horizontal) paddingRight - (default null) the right padding - if set then padding parameter is the leftPadding paddingBottom - (default null) the bottom padding - if set then paddingV parameter is the paddingTop RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤BITS

CLOSE ▲

obj.setSwipe(swipe)

setSwipe zim DisplayObject method DESCRIPTION Sets whether we want to swipe an object or not using ZIM Swipe. Recursively sets children to same setting. EXAMPLE

circle.setSwipe();

PARAMETERS swipe - (default true) set to false to not swipe object RETURNS obj for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

obj.setMask(mask, dynamic)

setMask zim DisplayObject method DESCRIPTION Specifies a mask for an object - the object can be any display object. The mask can be a ZIM (or CreateJS) Shape or a ZIM Rectangle, Circle, Triangle or Blob. Masking must be done with a Shape and the ZIM shapes are actually containers with Shape objects in them. So setMask() takes care of all the arrangements and updates the mask when using the following ZIM features: drag(), animate(), gesture(), transform() and using the Bezier curves, etc. with Blob. NOTE to skew and rotate a mask, put the mask in a Container - then skew the mask and rotate the container. That works better with skew anyway as rotation of a skewed object changes the skew. NOTE a Bitmap can be used for masking using the ZIM AlphaEffect See https://zimjs.org/spells.html?item=AlphaEffect NOTE the mask you pass in can still be seen but you can set its alpha to 0 just watch, if you want to interact with the mask it cannot have 0 alpha unless you provide a hit area with expand() for instance (use 0 for padding) You can also set the alpha to .01 NOTE before ZIM 6.7.1, setMask could not be chained - but now it can EXAMPLE

const rect = new Rectangle(200, 100, clear)
   .center();
var label = new Label("BIG", 200, null, white)
   .center()
   .setMask(rect);

NOTE to drag something, the alpha cannot be 0 so we can use expand(rect, 0) to assign a hit area then we can drag even if the alpha is 0 (or set the alpha to .01) EXAMPLE

const label = new Label("BIG", 200, null, white).center();
const rect = new Rectangle(200, 100, black)
   .expand(0)
   .center()
   .alp(0)
   .drag();
label.setMask(rect);

NOTE animate(), drag(), gesture() and transform() work specially with zim shapes to make this work otherwise, if you want to reposition your mask then set the dynamic parameter to true or use a zim.Shape() or createjs.Shape directly to avoid this issue EXAMPLE

// masking with a Blob
const image = new Pic("pic.jpg").centerReg();
const blob = new Blob({color:faint}).center(); // this is draggable by default
image.setMask(blob);

PARAMETERS supports DUO - parameters or single object with properties below mask - the object whose shape will be the mask dynamic - (default false) set to true if mask is being moved Blobs and shapes with drag(), transform(), gesture() and animate() will auto set dynamic to true if dynamic parameter is left empty Setting dynamic to false for these will remain with a setting of dynamic false and the mask will not move once set NOTE use obj.setMask(null) to clear the mask RETURNS the object for chaining Older versions returned the mask shape - the mask shape can now be accessed by obj.zimMask or mask.zimMask CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

obj.outline(color, size, boundsOnly)

outline zim DisplayObject method DESCRIPTION For testing purposes. Draws a rectangle around the bounds of obj (adds rectangle to the objects parent). Draws a cross at the origin of the object (0,0) where content will be placed. Draws a circle at the registration point of the object (where it will be placed in its container). These three things could be in completely different places ;-) NOTE warning - the outline is added to the object's container so this can affect the container's numChildren, etc. NOTE will not subsequently be resized unless called again in Ticker, pressmove event, etc. ZIM could update this outline automatically in drag and animate but since the outline() is used for testing, it is not a good idea to waste processing EXAMPLE

const circle = new Circle(50, red);
circle.center();
// show registration and origin at center and bounding box around outside
circle.outline();

EXAMPLE

Dynamic Examples
const ball = new Circle().center().drag({removeTweens:false});
ball.on("mousedown", ()=>{
   ball.outline();
});
ball.on("pressmove", ()=>{
   ball.outline();
});
ball.animate({rotation:360}, 4);
Ticker.add(()=>{ball.outline();});

EXAMPLE

// When applying outline() in a loop - loop in reverse
// as outlines are added to the object's container
const tile = new Tile(new Rectangle(), 5, 4, 10, 10).center();
tile.loop(item=>{
   item.outline();
}, true); // reverse loop

PARAMETERS supports DUO - parameters or single object with properties below color - (default brown) the color of the outline size - (default 2) the stroke size of the outline boundsOnly - (default false) set to true to see only rectangle bounds PROPERTIES adds a ZIMoutlineShape and ZIMoutlineShapeC to object adds an outlineToggled read only property that is true if showing and false if not showing outline METHODS adds an outlineToggle(state) method to the object that toggles the outline when called or can pass in true to show outline or false to not show outline note - method does not update the stage returns object for chaining RETURNS the obj for chaining; CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

obj.blendmodes(time, basic)

blendmodes zim DisplayObject method DESCRIPTION For testing purposes. Cycles through blendmode (composite operation) settings. Click the object to toggle the cycling. SEE: ble() for modes and how to set the blendmode EXAMPLE

new Rectangle(W, H, red).addTo();
new Circle(200, blue).blendmodes(); // will cycle through blend modes

PARAMETERS time - (default 1) seconds to see each blendmode basic - (default true) set to false to include extra compositions like source-over, destination-out, xor, etc. RETURNS the obj for chaining; CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

STYLE and Style()

STYLE zim constant and static Class DESCRIPTION STYLE can be used to set any parameter on a DisplayObject and many of the Controls. For instance: Circle, Blob, Button, Pane, Bitmap, Sprite, Tile, Pen, Emitter, Scroller, etc. These are applied at the time the objects are made. They are cascading with each level overriding the previous level: 1. GENERAL: any style can be specified in general corner:30 will make all corners default to 30 2. TYPE: styles for object type can be set to override the general styles Button:{corner:0} will make all button corners default to 0 3. GROUP: styles for a group can be set to override the type styles homePage:{corner:20} will make all objects of that group default to 20 4. OBJECT: styles applied as parameters to the object override all other styles new Button({corner:40}) will make this button have a corner of 40 See: https://zimjs.com/style.html for an example And: https://zimjs.com/test/styles.html for Control Styles NOTE As of ZIM Cat, a Style class has been added with the static methods to manage styles STYLE is an object so all of these are just a couple lines to make it easier to update the object. These include methods such as clear(), add(), remember(), addType(), addGroup(), etc. See the Style entry down below for a complete listing and description. NOTE As of ZIM Cat 03, Direct Object styles are supported - adding DisplayObjects to a type {} is no longer required. STYLE = {Button:{width:500}} // will be automatically converted to STYLE = {type:{Button:{width:500}}} NOTE As of ZIM ZIM 01, Direct Group styles are supported - adding a group to a group {} is no longer required. The group must start with a lowercase letter. STYLE = {big:{width:500}} // will be automatically converted to STYLE = {group:{big:{width:500}}} NOTE As of ZIM 016, group styles for an object will be used even if style for the object is set to false this will ignore all styles except those made by a group EXAMPLE

STYLE = {
   corner:20,
   backgroundColor:pink,
   type:{
      Button:{width:{min:100, max:500}, corner:0, centerReg:true, move:{y:series(-150, -50, 50, 150)}},
      Dial:{add:true, x:800, y:600, backgroundColor:red, scale:2, outline:true},
      Pane:{corner:IGNORE, color:white, draggable:true, width:300, label:"HI!"},
      ProgressBar:{add:true, x:200, y:600, barType:"rectangle", transform:true},
      Tabs:{add:true, x:100, y:100}
   },
   group:{
      homePage:{corner:30}
   }
}
new Button(); // will have a corner of 0 and be pink
new Button({group:"homePage"}); // will have a corner of 30 and be pink
new Button({corner:10, group:"homePage"}); // will have a corner of 10 and be pink
new Button({corner:IGNORE}) // will have a corner of its default 20 and be pink
new Button({style:false}).pos(700,100); // will have original default styles
new Dial(); // will be red and scaled twice as big and have an outline
new Tabs(); // will have a corner of 20 and selection will be pink
var p = new ProgressBar({corner:15}); // will be a bar with transform tools, corner 15
p.percent = 25;
new Pane().show(); // will ignore corner 30 and use its original 20 - it will say HI! in white and be draggable

EXAMPLE

// Lazy Objects - as of ZIM Cat 03
STYLE = {
   Circle:{color:red} // all circles made from now on are red
}
// This will be automatically converted by ZIM to:
STYLE = {
   type:{
      Circle:{color:red}
   }
}

Style.add({Circle:{color:red}}); // Lazy Objects with Style would do the same
Style.addType("Circle",{color:red}); // the traditional Style way also works
new Circle(50).center();

EXAMPLE

// Lazy Groups - as of ZIM ZIM 01
// note: these must be lowercase so not confused with Lazy Objects
STYLE = {
   alert:{color:red} // all objects with group alert made from now on are red
}
// This will be automatically converted by ZIM to:
STYLE = {
   group:{
      alert:{color:red}
   }
}

Style.add({alert:{color:red}}); // Lazy Groups with Style would do the same
Style.addGroup("alert",{color:red}); // the traditional Style way also works
new Circle({group:"alert"}).center();

EXAMPLE

// using once to run a STYLE on only the next object
STYLE = {color:red, once:true}
new Circle().center(); // this will be red
new Circle().center().mov(20); // this will be black

EXAMPLE

STYLE = {
   borderColor:dark,
   borderWidth:5,
   Rectangle:{
      // color:red,
      color:[red, pink, purple], // pick a random color from here
      centerReg:true,
      animate:{props:{rotation:360}, time:.5, ease:"linear", loop:true},
      move:{x:series(-200, 0, 200)}
   }
}
// make three spinning rectangles
loop(3, ()=>{new Rectangle();});

EXAMPLE

// this makes all objects be cached at their width and height
STYLE = {cache:true}

// specify width and height for any Label
STYLE = {   
   Label:{
      cache:{width:20, height:20} // or also pass in x and y
   }
}

EXAMPLE

// have Circle ignore red but use percent - groupOnly
STYLE = {color:red, wonder:{percent:50}};
new Circle({style:false, group:"wonder"}).center();

EXAMPLE

// Note: these commands are on the Style class not STYLE - but they operate on STYLE
// Also remember that ZIM STYLE only gets applied to new objects
// changing a STYLE will not change objects already created - this is different than CSS

// add a general color red style overwriting any previous color setting
Style.add({color:red});

// remove the general style for color
Style.remove("color");

// add styles for a Dial - overwriting all previous Dial styles
Style.addType("Dial", {useTicks:false, backgroundColor:yellow});

// remember current style using a "default" id
Style.remember();

// new Dials will use ticks and not be yellow
Style.addType("Dial", {useTicks:true});

// bring back the remembered styles so new Dials will have no ticks and be yellow
Style.recall();

// remember current STYLE to an id
Style.remember("myID");

// add styles for a group (existing objects are not changed - new ones will be)
Style.addGroup("big", {size:100});

the STYLE at the time myID was remembered will be active from now on
Style.recall("myID");

TRANSFORM STYLES Transformations can also be applied (all are numbers - visible is a Boolean): x, y, rotation, alpha, scale, scaleX, scaleY, regX, regY, skewX, skewY, visible a bounds style has a value of {x:Number, y:Number, width:Number, height:Number} where x and y are optional RANDOM, RANGES, AND SERIES STYLES Any property value can be a ZIM VEE value to make use of ZIM Pick see https://zimjs.org/spells.html?item=Pick color:[red, green, blue] will pick a random color for each object for which the style is applied x:series(100,200,300) will place subsequent objects at these locations width:{min:100, max:500} will make objects with a width within this range corner:{noPick:[0,40,0,40]}; will set corners - note we have to noPick this otherwise it would pick a number from the array for the corner value See Docs on ZIM Pick() and ZIM series() for more information Use the delayPick:true style to pass a PICK object to a control See: https://zimjs.com/explore/circleArcs.html WARNING - if applying a ZIM VEE value for a property in the general style scope it will be activated for every object made even if that object does not have that property. This will affect a series for instance. If three Sliders with useLabels turned on are made and the STYLE = {max:series(8,9,10)} this will not work as expected as the labels trigger the series steps as well. So use STYLE = {Slider:{max:series(8,9,10)}} instead so the series triggers only for Slider objects. ONCE Set a once property to true to run the STYLE setting on only the next object made. Once will delete the STYLE after the next object is made regardless of the whether the style is applied. STYLE = {color:red, once:true} new Circle().center(); // this will be red new Circle().center().mov(20); // this will be black Set a once property to a type such as "Label" and the STYLE will be cleared after a label has been made Note: some objects like an Arrow is made from a Button which has a label so this sometimes can be tricky. If it does not work, just turn the STYLE = {} or Style.clear() manually. FUNCTION STYLES The following functions have been added: addTo, loc, pos, center, centerReg, reg, transform, drag, gesture, tap, change, hold, outline, bounds, mov, animate, wiggle, expand and cache Values of true will give default functionality for all but tap, change, mov, animate and wiggle ZIM DUO configuration objects can be set as a value for any of these example: drag:true; or drag:{onTop:false} For animate and wiggle, [] can be put around multiple configuration objects to wiggle in the x and y for instance or run multiple animate calls on the object The tap, change and hold events are only what function to call - no extra parameters are available They can be turned off with noTap, noChange and noHold styles. CONVENIENCE STYLES add:true - has been provided to add to the stage (use addTo for other containers) move:{x:value, y:value} or move:x - mirrors the mov Function style (just adding the e) pos: has corner convenience values: "left", "right", "top", "bottom", "rightbottom" or "bottomright", "center" and "centerReg" blendMode:"difference", etc. see ble() cursor:true for pointer or use any CSS cursor type. Gets passed into cur() for the object shadow:{color:value, offsetX:value, offsetY:value, blur:value} to apply a shadow uppercase:true - to set text to uppercase if object has a label or a text property mouse:false - set the object to noMouse() - no point in ever setting this to true as true is the default visible:false - visible false style:false - will turn off all styles for the selector EXCLUSION A value of IGNORE can be used to exclude any earlier styles and return to the original default. IGNORE is a ZIM global variable. Setting style:false will exclude the object from all styles All DisplayObjects have a style parameter (default true). Set to false to ignore styles. GROUPS All DisplayObjects have a group parameter. This parameter accepts a string or a comma delimited string of multiple groups. The group of components can then be targeted in the Group section of STYLE or as of ZIM ZIM 01, just the Lazy Group can be used to put just the group name (must start with lowercase letter) A group can contain just one component and act like an ID in CSS. INHERIT Objects can inherit styles from their parent Eg. setting a color font property on List will pass that to Tabs which pass it to Button which passes it to Label This was initially set up manually but a new inherit parameter was created for a better system If any styles are not being applied as expected or as desired, let us know at https://forum.zimjs.com and we can adjust! The inherit property on the Components can be used to pass an object literal of styles to the component directly as well STYLES FOR CUSTOM CLASSES EXAMPLE

// 1. collect parameters: style, group, inherit
// 2. after calling super constructor add these:
   this.type = "Classname";
   this.group = group;
   var DS = style===false?{}:zim.getStyle(this.type, this.group, inherit);
// 3. collect parameters like so:
   if (radius==null) radius = DS.radius!=null?DS.radius:100; // where 100 is default
// 4. call styleTransforms at bottom of class:
   if (style!==false) zim.styleTransforms(this, DS);
// 5. use styles in your app code:
   STYLE = {      
      Classname:{
         radius:200
      }      
   }

NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) Style() - ZIM class Style provides static methods (on the class directly) to make changes to STYLE These are very small - the techniques are provided as a comparison Note: these affect only new objects - objects already created will not be changed Style.clear() - clears the STYLE same as: STYLE = {}; Style.clearTypes() - clears the types same as: delete STYLE.types; Style.clearGroups() - clears the groups same as: delete STYLE.groups Style.remembered - property for holding remembered styles same as: remembered = {}; Style.remember(id) - stores a copy of the current style in memory at an id or "default" same as: remembered[id||"default"] = zim.copy(STYLE); // makes a copy and clones cloneable objects Style.clearRemembered(id) - clears all remembered styles same as: delete remembered[id||"default"]; Style.recall(id) - sets the current style to a remembered STYLE same as: STYLE = remembered[id]; Style.add(obj) - adds general styles in form {newStile:val, newStyle2:value} same as: STYLE.newStyle = val; STYLE.newStyle2 = val; can also pass in Lazy Object style: Style.add({Object:{newStyle:value}}); or use Style.addType() below Style.addType(typeName, obj) - adds a type along with its styles - overwrites the same type same as: STYLE.type.typeName = obj; Style.addGroup(groupName, obj) - adds a group along with its styles - overwrites the same group same as: STYLE.group.groupName = obj; Style.remove(styleName) - removes a single general style specified as a string - same as delete STYLE.styleName same as: delete STYLE.styleName; Style.removeType(typeName) - removes a type as string same as: delete STYLE.type.typeName Style.removeGroup(groupName) - removes a group as a string same as: delete STYLE.group.groupName CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

PATH

PATH zim global variable DESCRIPTION PATH is used by lazy-loaded assets (not using Frame assets parameter or loadAssets() method). This will be set by default to the latest path parameter in Frame or in loadAssets(). NOTE if an lazy-loaded asset has a path in it (as in a /) then the PATH will be ignored. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// inside a ZIM Frame where no assets or path are provided:
new Pic("image.png").center(); // will look in local directory
new Pic("images/image.png").center(); // will look in images/ directory

PATH = "assets/";
new Pic("image.png").center(); // will look in assets/ directory
new Pic("sound.mp3").play(); // will look in assets/ directory
new Pic("test/image.png").center(); // will look in test/ directory

EXAMPLE

// inside a ZIM Frame with assets parameter of "image.png" and path parameter of "assets/"
new Pic("image.png").center(); // will look in the assets/ directory
new Pic("other.png").center(); // will look in the assets/ directory

PATH = null;
new Pic("image.png").center(); // will look in assets/ directory
new Pic("other.png").center(); // will look in local directory

const load = F.loadAssets("test.png", "test/");
load.on("complete", ()=>{
   new Pic("test.png").center(); // will look in test/ directory
   S.update();
});

new Pic("new.png").center(); // will look in test/ directory

CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

TIME

TIME zim global variable DESCRIPTION Set to "seconds" or "s" (default) or to "milliseconds" or "ms" to adjust how time is used in ZIM This will affect all time input in functions such as: animate() wiggle() timeout() interval() Sprite() Emitter() and various minor settings in Swiper(), Tip(), Pen(), Marquee(), Button(), ProgressBar(), Stepper(), Pages(), Accessibility(), Frame() animate(), timeout() and interval() also have a timeUnit parameter that will override the TIME setting NOTE before ZIM Cat, all time was in milliseconds. As of ZIM Cat, time defaults to seconds. This was primarily to make animation times a little simpler for coders, especially youth It also matches the units of industry animate engines such as GreenSock Once animate() was adjusted, it made sense to change globally The one question was timeout and interval which is based on JS setTimeout and setInterval The order of the parameters are already switched (and other features are added) so a simpler time adds additional incentive to use ZIM timeout and interval NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// default time is in seconds
new Circle().center().animate({x:0}, 2); // in 2 seconds

TIME = "milliseconds"; // go back to ms as in pre ZIM Cat.
new Circle().center().animate({x:W}, 2000); // 2000 ms

new Circle().center().animate({
   props:{y:0},
   time:2, // back to 2 seconds because timeUnit override
   timeUnit:"seconds"
});

CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

TIMECHECK

TIMECHECK zim global variable DESCRIPTION Check to see if time is in right units - default false (false as of ZIM Cat 04) logs a warning if ((TIME=="seconds" && time>10) || (TIME=="milliseconds" && time<9)) Set TIMECHECK = true to turn on check if desired for instance when converting an old file to ZIM Cat and want to check for milliseconds NOTE as of ZIM Cat - time is in seconds rather than milliseconds the TIMECHECK helps catch any conversion issues See also the TIME constant if milliseconds is preferred NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// default time is in seconds
// setting TIMECHECK to true will test for any time over 10 as that may be ms

TIMECHECK = true;
new Circle().center().wiggle("x", 100,200, 2000, 4000); // will give warning in console about time not being in ms

CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

DIR

DIR zim global variable DESCRIPTION Sets the direction to "ltr" or "rtl" (left-to-right or right-to-left) This means the using START and END constants will affect certain positions and alignments as follows: For pos(): horizontal will be LEFT for START if DIR is "ltr" and RIGHT if DIR is "rtl" horizontal will be RIGHT for END if DIR is "ltr" and LEFT if DIR is "rtl" For Label(), LabelLetters(), List() align will be LEFT for START if DIR is "ltr" and RIGHT if DIR is "rtl" align will be RIGHT for END if DIR is "ltr" and LEFT if DIR is "rtl" for LabelLetters, lineAlign is affected rather than align NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

DIR = "rtl";
new Circle().pos(100,0,START,TOP); // will pos 100 from the right

EXAMPLE

DIR = "rtl";
new Label({
   text:"Will this wind be so mighty as to lay low the mountains of the earth?",
   labelWidth:200,
   align:START
}).center(); // will align the text to the right and then center label

CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

SEEDRAND

SEEDRAND zim global variable DESCRIPTION WARNING - currently, this does not work - see seedRandom() in CODE module. If set, the ZIM rand() function will be seeded with its value. This means that rand() will repeat in order its random results. See also the seed parameter of rand() to customize which rand() calls repeat. See also SEEDRANDCOUNT to change the seed order - for instance set to 0 to start over. This allows, for instance, a generative art piece to be the same for a certain user. Or in conjunction with SEEDRANDCOUNT lets a player replay a same random game level. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

SEEDRAND = 20;
zog(rand(10,100)); // each time the app is run, this will be the same random number between 10 and 100
zog(rand(10,100)); // this will probably be a different random number than the first - but the same each time
zog(rand()); // and this will be the same random number between 0 and 1 not including 1.

EXAMPLE

// Remember the seed for a user with localStorage (like a cookie)
SEEDRAND = rand(100000000);
if (localStorage) {
   if (localStorage.seed) SEEDRAND = localStorage.seed;
   else localStorage.seed = SEEDRAND;
}
new Circle(100, [red, green, blue]).center();

// the user will always have the same random color
// unless no localStorage or localStorage is cleared

SEEDRANDCOUNT = 0; // or SEEDRANDCOUNT--;
// below, will make another circle the same color as the first
new Circle(100, [red, green, blue]).center().mov(0,300);

CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

SEEDRANDCOUNT

SEEDRANDCOUNT zim global variable DESCRIPTION WARNING - currently, this does not work - see seedRandom() in CODE module. but there is no equivilant to SEEDRANDOMCOUNT yet - we are working on it. The current order number used for rand() if SEEDRAND is set or the rand() seedRand parameter is set This starts at 0 and increases each time rand() is used internally or in the app. See also SEEDRAND and the seed parameter of rand(). NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

SEEDRAND = 10000;
zog(rand(100)); // a first random number
zog(rand(100)); // a second random number

SEEDRANDCOUNT = 0;
zog(rand(100)); // the first random number again
zog(rand(100)); // the second random number again

SEEDRANDCOUNT--;
zog(rand(100)); // the second random number again

SEEDRAND = null;
zog(rand(100)); // an unseeded random number

SEEDRAND = 10000; // same seed as before
zog(rand(100)); // a third random number (as SEEDRANDCOUNT was not changed)

SEEDRANDCOUNT = 1;
zog(rand(100)); // the second random number again (index 1)

SEEDRAND = 200;
zog(rand(100)); // a new random number but at index 2 as SEEDRANDCOUNT does NOT reset when SEEDRAND changes

CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

ANIMATE

ANIMATE zim global variable DESCRIPTION Set to false to stop animate() calls from working. Handy for testing your app so you do not have to wait for animations every time! To animate things in you can place everything in their final positions and then set the "from" parameter to true to animate from starting positions like x or y offstage, scale or alpha of 0, etc. Then to avoid waiting for animations to complete, you can just set ANIMATE = false and all your objects will be in their final locations and you don't wait for animations When you are ready to run your animations for a final version, etc. just delete the line or set ANIMATE to true. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

ANIMATE = false;
// without the line above, the circles will animate in
// we would have to wait for them every time we load the app
// sometimes animations are even longer and this can waste development time
// when we add the line above, the circles are on stage right away
// this is easier and safer than commenting out all your animations

const circle1 = new Circle(200, green);
circle1.center();
circle1.x -= 110;
circle1.animate({props:{alpha:0, scale:0}, time:.7, from:true});

const circle2 = new Circle(200, pink);
circle2.center();
circle2.x += 110;
circle2.animate({props:{alpha:0, scale:0}, time:.7, wait:.7, from:true});

CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

OPTIMIZE

OPTIMIZE zim global variable DESCRIPTION A setting that relates to how S.update() is used by the components. Default is false which means some components will update the stage automatically: the Slider will update the stage so that you can see the knob slide; the CheckBox and RadioButtons when checked will update the stage; the Tabs change button colors and then update the stage; closing of a Pane will update the stage the Stepper also updates as does changing color of a button, label, etc. However, concurrent S.update() calls can slow down mobile performance. So if you are making content for mobile you should set OPTIMIZE = true; Then you will have to S.update() in the change event handlers but you were probably doing things in these events and updating anyway! Just be careful - you might be testing a checkbox and it won't check... So it takes some getting used to running in optimized mode. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// add this to the top of your script
OPTIMIZE = true;
const slider = new Slider();
slider.center();
// will not see the slider operate (aside from rolling over button)
// unless you call S.update() in the change event
slider.on("change", ()=>{
   // do your code
   S.update(); // now will see the slider operate
});

components affected by OPTIMIZE: Label, Button, Checkbox, RadioButton, Pane, Stepper, Slider, Tabs OPTIMIZE set to true also affects the ZIM Ticker for functions like animate, drag, Scroller, Parallax See zim.Ticker as you may have to set Ticker.update = true; CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

ACTIONEVENT

ACTIONEVENT zim global variable DESCRIPTION a setting that specifies the event type to trigger many of the components default is "mousedown" which is more responsive on mobile setting the constant to anything else, will cause the components to use "click" for instance, with the default settings, the following components will act on mousedown CheckBox, RadioButtons, Pane, Stepper and Tabs NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// put this at the top of your code
ACTIONEVENT = "click";


new CheckBox().center();
// note it now operates on mouseup (click)
// the default ACTIONEVENT is mousedown

CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

DEFAULTWIRE

DEFAULTWIRE zim global variable DESCRIPTION The default setting for wire() and wired() source input type (the input parameter). wire will usually be used to wire a component to a DisplayObject and components usually have a value or index property that is changing in a change event, for instance NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// put this at the top of your code
DEFAULTWIRE = "index";
const selector = new Selector(someTile).center();
new ColorPicker().center().wire(selector, "index");

// the ColorPicker has a value which would normally be the default for wire()
// but here we override this with the DEFAULTWIRE so the index is used instead
// alternatively, the input parameter could be set to "index"
// but perhaps there are many of these so the constant is provided for convenience

CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

KEYFOCUS

KEYFOCUS zim global variable DESCRIPTION A global variable that stores the DisplayObjects that will receive keyboard focus. This is a system for all DisplayObjects with keyboard controls (set to active). Eligible DisplayObjects are: Squiggle, Blob, Stepper, Slider, Dial, Tabs, ColorPicker, TextArea The first eligible DisplayObject made will set KEYFOCUS to itself. Anytime an eligible DisplayObject is used it sets KEYFOCUS to itself. Eligable DisplayObjects have a keyFocus property that can be manually set. There is only one DisplayObject with key focus so setting removes key focus from the last key focused component. NOTE if tabbing from one component to the next is needed, consider using ZIM Accessibility() NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const slider = new Slider().center().mov(0, -100);
const stepper = new Stepper().center().mov(0, 100);
// arrows will control the slider as it is the first component made
// if the stepper is used then arrows will control the stepper
// if stepper.keyFocus = true is set to start then the stepper would have key control
// alternatively, KEYFOCUS = stepper; would give the stepper key control
// setting KEYFOCUS = null; would make no component have key control (until the component is pressed)

CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

POSREG

POSREG zim global variable DESCRIPTION A global variable that stores the desired setting for the reg parameter of pos() pos() had traditionally positioned based on registration point Now it defaults to position to the sides or the top and bottom Setting POSREG = true; will make pos() default to positioning at the registration NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

POSREG = false; // default
new Rectangle().pos({x:10, right:true}); // will position right side 10 pixels from right

POSREG = true;
new Rectangle().pos({x:10, right:true}); // will position registration point 10 pixels from right

CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

DRAGALL

DRAGALL zim global variable DESCRIPTION A global variable that stores the desired setting for the all parameter of drag() By default, drag() will drag individual items in a container (currentTarget = false) This is handy to quickly drag a bunch of things. But some developers are used to dragging the whole container by default. Setting DRAGALL=true will change drag calls to default to the whole container (currentTarget = true) NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

DRAGALL = false; // default
containerOfMonsters.drag(); // will drag individual monsters

DRAGALL = true;
containerOfMonsters.drag(); // will drag all the monsters at once

CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

MOBILE

MOBILE zim global variable NOTE for making mobile apps - see https://zimjs.com/mobile.html and the PWA entry in Docs https://zimjs.org/spells.html?item=PWA NOTE this is the MOBILE constant not the mobile() function. The mobile function detects if your app is on mobile If searching for mobile press GO to go find mobile() DESCRIPTION A global variable that overrides ZIM mobile() There are a half-dozen settings in ZIM that use ZIM mobile() to adjust default parameters and various interactions - some examples are: Squiggle() / Blob() // handleSize = mobile?20:10; // some interactions with controls Button() // toggleEvent = mobile?"mousedown":"click"; transform() // customCursors = mobile?false:true; // handleSize = mobile?20:10; Accessibility() // application = mobile?false:true; Emitter() // cache = mobile?false:true; VR() // swiper = mobile?false:true; These settings will follow the value set by setting: MOBILE = false; or MOBILE = true; The default setting for MOBILE is "default"; If left as default, then ZIM uses the results from mobile(); WARNING: setting MOBILE will result in that value being returned from mobile(); To get an actual value from mobile() set MOBILE = "default" and run mobile(); NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

MOBILE = false;
new Squiggle().center();
// will have smaller desktop Bezier handles even on mobile
// but will also set the Ticker framerate to 60, etc.
// unless MOBILE, at some point, is set back to default:
MOBILE = "default";

MOBILE = true;
new Blob().center();
// will have bigger mobile Bezier handles even on desktop
// but will also set the Ticker framerate to 30, etc.
// unless MOBILE, at some point, is set back to default:
MOBILE = "default";

CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Ticker = {}

Ticker zim static class DESCRIPTION A static class to let ZIM use a requestAnimationFrame with a single stage update. Used by ZIM animate, drag, parallax, scrollers, etc. but any function can be added. If a function has been added to the Ticker queue then it will run in the order added along with a single stage update after all functions in queue have run. There are settings that can adjust when the Ticker updates so see Usage notes below. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const circle = new Circle(50, red).center();
Ticker.add(()=>{
   circle.x++;
}); // can also pass in a specific stage

// to be able to remove the function:
Ticker.add(tryMe);
function tryMe() {circle.x++;}
Ticker.remove(tryMe);

// OR with function literal, use the return value
var tickerFunction = Ticker.add(()=>{circle.x++;});
Ticker.remove(tickerFunction);

// Check to see if a function is in the Ticker for that stage:
zog(Ticker.has(tickerFunction)); // false at the moment until added again

USAGE if OPTIMIZE is true then the Ticker will not update the stage (it will still run functions) however, OPTIMIZE can be overridden as follows (or with the always() method): METHODS (static) ** As of ZIM 5.1.0, stage is optional and will default to the stage of first Frame object made ** WARNING - if you are in a second Frame you should pass stage as a parameter so it does not point to the first Frame's stage ** NOTE - if no stage is provided, the Ticker will update the stage of the zdf - ZIM default frame (usually the first Frame made) Ticker.always(stage) - overrides OPTIMIZE and always runs an update for the stage even with no function in queue Ticker.alwaysOff(stage) - stops an always Ticker for a stage Ticker.add(function, stage) - adds the function to the Ticker queue for a given stage and returns the function that was added the function will receive a CreateJS tick object with delta, time, timeStamp, etc. properties Ticker.remove(function) - removes the function from the Ticker queue Ticker.removeAll([stage]) - removes all functions from the Ticker queue (optionally per stage) Ticker.isUpdating(stage) - returns true if Ticker is updating for the stage or false if not Ticker.has(function, stage) - returns a Boolean true if function is currently added to the Ticker for the stage - or false if not currently added Ticker.setFPS(60, 60) - (mobile, pc) default is set at natural requestAnimationFrame speed - this seems to be the smoothest Note: as of ZIM Cat 04, mobile default speed is 60fps - previous to ZIM Cat 04 mobile default speed was 30fps Ticker.getFPS() - get the current frames per second - using createjs.Ticker.getMeasuredFPS(); Ticker.setTimingMode(mode) - (default "raf") RAF uses RequestAnimationFrame without framerate synching - gets screen synch (smooth) and background throttling set to "synched" for framerate synching - but will add some variance between updates set to "timeout" for setTimeout synching to framerate - no screen synch or background throttling (if RAF is not supported falls back to this mode) see CreateJS docs: https://www.createjs.com/docs/tweenjs/classes/Ticker.html Ticker.raw(function) - a stand-alone direct call to RequestAnimationFrame for maximum speed Example: https://zimjs.com/raw/ Does not use Dictionary lookup that the add() uses so provides ultimate speed for generative art, etc. Returns function as id so can use Ticker.removeRaw(id) function will receive a single parameter that is a DOMHighResTimeStamp raw() does not automatically update the stage so put a S.update() in the function raw() is for when you want to run one function much like the draw() in Processing, the animate() renderer in ThreeJS, etc. add() is for when you want to run multiple functions with a single globally coordinated S.update() Ticker.removeRaw(id) - remove the raw function based on the return value of the var id = Ticker.raw(function) Ticker.dispose([stage]) - removes all functions from the queue removes and removes the list (optionally per stage) PROPERTIES (static) Ticker.update = true - overrides OPTIMIZE and forces an update if a function is in the queue Ticker.update = false - forces no update regardless of OPTIMIZE Ticker.update = null (default) - only updates if there is a function in queue and OPTIMIZE is false Ticker.list - a ZIM Dictionary holding arrays with the functions in the Ticker queue for each stage Ticker.list.objects - the array of stages in the Ticker Ticker.list.values - the array holding an array of functions for each stage in the Ticker Ticker.framerate - read only - use setFPS() to set the Ticker is used internally by zim functions like animate(), drag(), wire(), Scroller(), Parallax() you are welcome to add functions USAGE 1. if you have your own ticker going, just set OPTIMIZE = true and don't worry about a thing 2. if you do not have your own ticker going but still want OPTIMIZE true to avoid components updating automatically, then set OPTIMIZE = true and set Ticker.update = true this will run a single update only when needed in zim Ticker for any zim functions 3. if you want a ticker with a single update going all the time (with OPTIMIZE true or false) then run Ticker.always([stage]); // optionally per stage 4. if for some reason (can't think of any) you want no ticker updates for zim but want component updates then set OPTIMIZE = false and then set Ticker.update = false 5. if you want maximum speed use Ticker.raw(function) which flows directly through to a RequestAnimationFrame CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

Pages(pages, transition, speed, transitionTable, holder, arrowDisableColor, continuous, style, group, inherit)

Pages zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION Pages handle going between pages. Make a Pages object and add it to the stage. All your pages from then on are added to and manipulated inside the Pages object. Pages allows you to set the destination pages for swipe events. Other events like buttons can call the go(page, direction) method. Consider using HotSpots() to efficiently handle multiple buttons. ZIM Cat introduces the ZIM Page() class that makes a Container with a background Rectangle. This can be used as a page or any Container or other DisplayObject can be used as a page. Transitions with ZIM Emitter were also added in ZIM Cat. See https://zimjs.com/cat/page.html ZIM Cat 03 intruduces the ZIM Arrow() class for an easy previous/next button system. See https://zimjs.com/survey.html As of ZIM ZIM 02 a GlobalManager will be added to handle Pages resize for cached transitions. NOTE if you have a TextArea, Tag or Loader on a page, ZIM will automatically add and remove it. but if the TextArea, Tag or Loader is in a Container on the page then it must be manually added and removed. See https://zimjs.com/test/textareapages.html for an example NOTE if using a ZIM List in Pages then update the list after transitioning: pages.on("pagetransitioned", ()=>{ list.update(); }); NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// make pages (these can have content added to them)
const page1 = new Page(W, H, blue);
new Label("Swipe sideways").center(page1);
const page2 = new Page(W, H, green, pink); // makes a gradient
const page3 = new Page(W, H, yellow);

new Pages([page1, page2, page3], "slide").addTo();

EXAMPLE

// PAGES WITH ARROWS
const page1 = new Page(W, H, green);
const page2 = new Page(W, H, purple, pink);
const page3 = new Page(W, H, yellow);

const pages = new Pages([page1, page2, page3], "bubbleZIM", 1).addTo();
new Arrow({pages:pages, direction:LEFT})
   .rot(180)
   .pos(50,50,LEFT,BOTTOM);
new Arrow({pages:pages}).pos(50,50,RIGHT,BOTTOM);

EXAMPLE

// CUSTOM SWIPING
const home = new Page(W, H, blue);
new Label("Swipe up and down").center(home);
const hide = new Page(W, H, green, pink);
const find = new Page(W, H, yellow);

// If swipe is not specified Pages will automatically swipe horizontally
// to the next page to the last page and backwards to the first page
// Here we override this with swipe arrays

const pages = new Pages({
   pages:[
      // imagine pages to the left, right, up and down
      // swipe:["to page on left", "to page on right", etc.s]
      {page:home, swipe:[null,"info",hide,find]},
      {page:hide, swipe:[null,null,null,home]},
      {page:find, swipe:[null,null,home,null]}
   ],
   transition:"slide",
   speed:1 // slower than usual for demonstration
}).addTo();

// handle any events inserted into the swipe arrays
pages.on("info", ()=>{zog("info requested")});

// handle any custom requirements when arriving at a page
// the event gives you the page object
// so add a name properties just make it easier to manage
home.name = "home";
hide.name = "hide";
find.name = "find";
pages.on("page", ()=>{
   zog(pages.page.name); // now we know which page we are on
})

// you can manually go to pages as well
// we will make a little triangle to click:
const back = new Triangle({color:red});
back.center(find); // add triangle to find page
// not really supposed to add things to zim shapes
// they default to mouseChildren false
// we want to click on the back button
// so we have to set the mouseChildren of find to true
find.mouseChildren = true;
back.cur();
back.on("click", ()=>{pages.go(home, UP)});

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) pages - (default null) an array of pages or page objects - for example: [home, hide] assuming home and hide Page or Container objects are made an optional swipe array holds mappings to swipe events [RIGHT, LEFT, DOWN, UP] or ["right", "left", "down", "up"] these could be pages to the left, right, top and bottom of the current page or they can be call commands as strings that will dispatch events with that name if no page has swipe data, then pages will swipe horizontally to each other by default with no wrap unless continuous is true if swipe data is desired then use page object format: [{page:home, swipe:[null,"info",hide,find]},{page:hide, swipe:[null,null,null,home]}] set swipe:[] to not swipe the page just setting one page with swipe:[] and leaving the rest blank, will mean no swiping transition - (default "none") the type of transition "none", "reveal", "slide", "fade", "clear", "black", "white", "fan" A ZIM Emitter() can also be passed in as a transition. If the emitter has vertical or horizontal set to true then the emitter will sit above a slide transition otherwise the emitter will sit above a fade transition. The following built in emitter transitions are provided: "pixelDark", "pixelLight", "pixelZIM", "bubbleDark", "bubbleLight", "bubbleZIM", "lineDark", "lineLight", "lineZIM" "explodeDark" "explodeLight" "explodeZIM" NOTE: if using pages that are smaller than the stage, use a Rectangle() as the holder and the transition effects will be automatically masked by the rectangle. speed - (default .2) speed in seconds of the transition if set (see also ZIM TIME constant) transitionTable - (default "none") an array to override general transitions with following format: [[fromPage, toPage, "transition", seconds(optional)], etc.] holder - (default the default stage) where are we putting the pages (used for setting transition properties) If using pages that are smaller than the stage set the holder to a zim Rectangle with the desired dimensions and location and the pages and transition effects will be masked by the shape of the rectangle. The rectangle will have a mouse() added so it is interactive inside. Set the color of the rectangle to clear if desired. arrowDisableColor - (default grey) the disabled backgroundColor of the ZIM Arrow buttons when there is no next/prev page for that button set to clear to hide the Arrow button completely false will not change the color but the button will not go anywhere when pressed continuous - (default false) when default swiping is on, set to true to make pages continuous so last page goes forward to first page and first page goes backwards to last page METHODS addPage(page, swipeArray) - lets you alternatively add pages after you create the object removePage(page) - lets you remove a page (if on this page, call a go() first and remove on the page event) setSwipeArray(page, swipeArray) - lets you set the swipe array for a page go(newPage, direction, trans, speed) - lets you go to a page for events other than swipe events newPage can be a reference to the page or an index matching the pages array order direction is which way the newPage is relative to the current page trans and speed are optional and will override any previously set transitions (speed in s) resize() - call to resize transitions - not the pages themselves (use layouts) pause() - pauses a transition before it starts (call from swipe event) unpause() - unpauses a paused transition (unless another go() command is called) puff(time) - adds all the pages behind the currentPage (adding time (s) will auto call settle) settle() - removes all pages except the currentPage setArrows(index) - disables or enables Arrow buttons held in arrows property - called automatically by Arrow buttons disable() - stops swipe from activating and sets active = false enable() - enables swipe action and sets active = true dispose() - clears listeners and pages PROPERTIES type - holds the class name as a String speed - of transitions in seconds (see also ZIM TIME constant) transitionTable - [[fromPage, toPage, "transition", seconds(optional)], etc.] overrides default transition page - the current page object (read) index - the index of the current page in pages (read) pages - the page array - in format: [{page:page1, swipe:[leftPage, rightPage, upPage, downPage]},{page:page2, swipe:[leftPage, rightPage, upPage, downPage]}] this may be adjusted if just an array of pages is passed which creates default swipe array and will be adjusted for pages added or removed with addPage or removePage methods lastPage - the last page before transition (read) direction - direction of transition (read) transitioning - read only Boolean as to whether the pages are transitioning arrows - object with LEFT, RIGHT, DOWN, UP properties each holding an array of ZIM Arrow buttons if created arrowDisableColor - the disable color of the Arrow buttons if created active - default true, boolean to have swipes active (good for layered Pages objects) swipe - the ZIM Swipe object used for pages (can tweak distance to percentage if rescaling) ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS Pages dispatches a "page" event when the page changes (to a page in the swipe array) myPages.on("page",function(e){...}) with myPages.page being set to the new page (e.target.page) and myPages.lastPage being set to the old page (e.target.lastPage) myPages.direction gets the direction of the transition (e.target.direction) if there is a string in the swipe array like "info" then the Pages() object dispatches an event equivalent to the string for the data example above, myPages.on("info",function(e){...}); would trigger when the home page is swiped to the left Pages dispatches a "swipe" event before changing pages if swiped you can then get pages.page, pages.nextPage and pages.direction you can pause() if needed the transition to handle data, etc. and then unpause() you do not need to handle going to another page when swiping - that is handled automatically so you probably will not use the swipe event unless handling data between pages Pages also dispatches a "pagetransitioned" event when a transition is complete you will have the same properties available as with the page event USAGE the first page object is the start page for the data above, swiping the home page down automatically goes to the hide page if the home page is swiped up it automatically goes to the find page you can add pages with the addPage() method it will not show until you swipe or go to it - unless it was the first page added 1. if the holder is the stage then add the pages object to the stage 2. if the holder is another container then add pages object to the holder and add the holder to the stage (read this twice to make sure you got it!) in the second case, you will have to mask the holder so you do not see transitions DO NOT add the pages to the stage or holder - let Pages do it for you sometimes you need a page to be on the stage to operate on it if this is the case, call puff() and make adjustments call settle() when done - or pass in a time in ms to puff to auto settle after that time you can define multiple pages objects add and remove pages objects as needed CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

Arrow(backgroundColor, rollBackgroundColor, pages, direction, type, newPage, trans, speed, style, group, inherit)

Arrow zim class - extends a zim.Button which extends a zim.Container which extends a createjs.Container DESCRIPTION Makes an Button with an arrow backing of different designs - see types parameter - default is a Triangle. By default it faces right - you can use .rot(180) to make it face left and .rot(-90) or .rot(90) for up and down. WITH ZIM PAGES If you pass in a ZIM Pages object then the Arrow is set to automatically go from page to page. You must pass in a pages object to use and which direction you want to go. The button will call the Pages go() method for whatever page listed in the pages array at the current page and direction In other words, if page is page1 and the pages array says page1 swipes right to page2 then passing in RIGHT would make pressing the Arrow button to to page2. The order of the pages in the pages pages array may be different than their swipe targets although if just an array of pages is passed into Pages then the order will match. If a page has no page listed for the direction then the Arrow will automatically remove itself. This means that PageArrow for a direction will be registered with the Pages object So that the button can be added back again if a new page needs it. These can be embedded on the pages themselves or used in interface outside the pages. SEE https://zimjs.com/survey for an example. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// a fat arrow with a stick - also "thin", "angle" (no stick) and "triangle" (default)
new Arrow({type:"thick"}).pos(30,30,RIGHT,BOTTOM).tap(next);

EXAMPLE

// Assuming a pages variable that points to a ZIM Pages object
// These will go through the pages in order
// and default to remove themselves if not needed at start or end

new Arrow(blue, green, pages, RIGHT).pos(30,30,RIGHT,BOTTOM);
new Arrow(blue, green, pages, LEFT).pos(30,30,LEFT,BOTTOM);

PARAMETERS supports DUO - parameters or single object with properties below backgroundColor - (default blue) the background color of the arrow (can STYLE anything Button style) rollBackgroundColor - (default blue.lighten(.2)) the rollBackground color of the arrow pages - (default null) a ZIM Pages object - if null then this is just an arrow button if set to Pages object then will atomatically work to change pages - see also direction direction - (default RIGHT) a direction RIGHT, LEFT, UP, DOWN to the page the button will lead to type - (default "triangle") the type of the arrow as follows: "triangle" is a triangle (default) "thick" is a fat arrow "thin" is a thin arrow "angle" is an angle bracket These are icons and rollIcons added to a ZIM Button with clear backgroundColor Can also set backing and rollBacking properties, etc. with STYLE newPage - (default null) specify a new page by default the page will go to the next page if direction is RIGHT or DOWN by default the page will go to the prev page if direction is LEFT or UP trans - (default Pages default transition) the type of transition "none", "reveal", "slide", "fade", "clear", "black", "white", "fan" A ZIM Emitter() can also be passed in as a transition. If the emitter has vertical or horizontal set to true then the emitter will sit above a slide transition otherwise the emitter will sit above a fade transition. The following built in emitter transitions are provided: "pixelDark", "pixelLight", "pixelZIM", "bubbleDark", "bubbleLight", "bubbleZIM", "lineDark", "lineLight", "lineZIM" "explodeDark" "explodeLight" "explodeZIM" speed - (default Pages default speed) speed in seconds of the transition if set style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS activate(state, offColor) - turn on or off the Arrow button with state true or false and a color for offColor returns object for chaining All ZIM Button methods PROPERTIES setDisabled - set to true or false in ZIM Pages "page" event function to override Arrow button setting or just manually adjust the Pages pages swipe array - which is better as disables or enables swipe and Arrow button setting All ZIM Button properties - including icon and rollIcon which access the ZIM Triangle for the arrow ACTIONEVENT This component is affected by the general ACTIONEVENT setting The default is "mousedown" - if set to something else the component will act on click (press) EVENTS Arrow automatically adds a "mousedown" or "click" event to go to the desired page The event will call the go() method of ZIM Pages Additional "mousedown", "click" or other button events can be added if desired CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

HotSpot(obj, x, y, width, height, call, callOver, callOut, local, talk)

HotSpot zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION HotSpot adds an invisible button to a container object (often think of this as the page). If you want multiple spots it is more efficient to use the HotSpots class above which manages multiple HotSpot objects (otherwise you end up with multiple event functions). The spot is a pixel rect with an alpha of .01 and then uses a hitArea of a backing shape. The spot will get a cursor of "pointer". NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const hs = new HotSpot(S, 100, 100, 50, 50, myFunction);
function myFunction() {
   zog("activation!");
}
// hs.show(); // uncomment this to see rectangle hotSpot

PARAMETERS supports DUO - parameters or single object with properties below holder - container object in which to place the hotspot (stage for instance) x, y, width and height - of the rectangle for the hotspot call - the function to call when the spot is pressed local - (default true) hotSpot rect is based on local coordinates of the container use when the element scale independently from the stage if set to false then you pass in global coordinates and hotSpot will convert them talk - (default "hotspot") text for ZIM Accessibility screen reader METHODS show() - helps when creating the spot to see where it is hide() - hides the hotspot dispose() - removes the listener and the spot PROPERTIES type - holds the class name as a String spot - the actual hotSpot object that gets added to the container can be accessed with the spot property eg. hs.spot ACTIONEVENT This component is affected by the general ACTIONEVENT setting The default is "mousedown" - if set to something else the component will act on click (press) CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

HotSpots(spots, local, mouseDowns)

HotSpots zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION HotSpots allow you to create multiple hotSpot objects on multiple pages. A hotSpot is an invisible click area (like an image map in HTML). You can alternatively specify an object and it will turn that into a hotSpot. HotSpots lets you control many or all of your interactions in one place. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// our first hotSpot will be a 50 pixel square at 100, 100

// then we will add hotSpots to these items as well
const circle = new Circle(60, red).center();
const button = new Button().pos(100,100,RIGHT,BOTTOM);

// make the hotSpots object
// these are all on the same page
// gets really handy when you have multiple pages with Pages
const hs = new HotSpots([
   {page:S, rect:[100,100,50,50], call:()=>{zog("hot!");}},
   {page:S, rect:circle, call:()=>{zog("circle!");}},
   {page:S, rect:button, call:()=>{zog("button!");}},
]);
// hs.show(); // uncomment this to see rectangle hotSpots

PARAMETERS supports DUO - parameters or single object with properties below spots (default null) - an array of hotspot data objects with the following format: [{page:home, rect:[190,50,260,260], talk:"screen reader content", call:someFunction, callOver:optionalFunction, callOut:optionalFunction}, {page:home, rect:[70,405,500,150], talk:"screen reader content", call:someOtherFunction, callOver:optionalFunction, callOut:optionalFunction}] the page should be a Container the rect is the [left, right, width, height] of a rectangle relative to the stage talk (optional) will provide text for screen reader if ZIM Accessibility() is turned on call is the callback function to call when a hotSpot is clicked callOver and callOut will add mouseover and mouseout event functions to the hotSpot instead of a rect array you can pass an object that must have setBounds() set [{page:home, rect:submitButton, call:function(){//code}}] the hotSpot will then use the button position and bounds as the rectangle note - in this case, HotSpots will actually add a mousedown or click event to the button null can be left here and then hotSpots added with add() local (default true) hotSpot rect is based on local coordinates of the container use when the element scale independently from the stage if set to false then you pass in global coordinates and hotSpot will convert them mouseDowns (default false) stops mousedown events on a button that is used as a hotSpot prevents users from activating a swipe on a button (when using ZIM Swipe) METHODS show() - shows the hotspots for testing during authoring time hide() - hides the hotspots add(page,rect,call) - can dynamically add hotSpots remove(page,rect) - rect is optional - so can remove all spots on a page or by the rect dispose() - removes listeners PROPERTIES type - holds the class name as a String hotSpots - an array of HotSpot objects ACTIONEVENT This component is affected by the general ACTIONEVENT setting The default is "mousedown" - if set to something else the component will act on click (press) NOTE the class does actually add rectangle shapes to your page the spot is a pixel rect with an alpha of .01 and then uses a hitArea of a backing shape this could have been done with "math" alone but rollover cursor would be a pain the class creates HotSpot objects - see the class underneath this one CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

Guide(obj, vertical, pixels, hideKey, pixelKey, style, group, inherit)

Guide Class extends a zim.Container which extends a createjs.Container DESCRIPTION Guide shows a guideline to help layout assets with code. Cursor x and y in pixels or percentage are shown along edges as a distance from the guide. You only need one guide per axis because you measure from the guide to your cursor. Use the G key to toggle guide visibility. Use the P key to toggle pixels and percent. Make sure you remove the guide for your final version (dispose). NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// simple form for a vertical guide
// use the distance from the guide to your cursor to measure
// so you only need one vertical guide for horizontal measurement
const guide = new Guide();

// better to add guides to a GuideManager
const manager = new GuideManager();
manager.add(new Guide(stage));
manager.add(new Guide(stage, false));

// or with percent
// manager.add(new Guide(stage, true, false));
// manager.add(new Guide(stage, false, false));

// then you can remove all guides with
// manager.dispose();
// handy with guides on multiple Pages

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) obj - (default the default stage) object to add guide to for example a Container vertical - (default true) set to false for horizontal guide pixels - (default true unless Frame is in FULL mode) set to false to show percent hideKey - (default G) key to press to hide guide pixelKey - (default P) key to press to swap pixels and percent METHODS resize() - resizes the guide if the container size changes - not needed now with global manager toggle(state - default null) - toggle() will show controls if they are hidden or hide controls if they are showing alternatively, pass in true to show controls or false to hide controls note - method does not update the stage dispose() - removes keyboard event listeners and guide PROPERTIES type - holds the class name as a String toggled - boolean - read only true if controls are showing or false if controls are hidden pixels - boolean - set to true to change to pixels, false to go to percent CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Grid(obj, color, pixels, hideKey, pixelKey, allowToggle, cache, numbers, style, group, inherit)

Grid zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION A Grid shows gridlines to help layout assets with code (pixels is default). Cursor x and y percentage or pixels are shown along edges. Use the G key to toggle grid visibility. Use the P key to toggle pixels and percent. Make sure you remove the grid for your final version (dispose). NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const grid = new Grid();

// better to add grids to a GridManager
const manager = new GridManager();
manager.add(new Grid());

// or with percent
// manager.add(new Grid(null, null, false));

// then you can remove all grids with
// grid.dispose();
// handy with guides on multiple Pages

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) obj - (default the default stage) the object to add grid to (for example a Container) color - (default black) the color of the grid pixels - (default true unless Frame is in FULL mode) set to false to show percent hideKey - (default G) key to press to hide grid pixelKey - (default P) key to press to swap percent and pixels allowToggle - (default true) set to false to not allow grid to toggle between percent and pixels with key cache - (default true) cache the grid numbers - (default true) show numbers on grid METHODS resize() - resize the grid if the container changes size - not needed now with global manager toggle(state - default null) - toggle() will show controls if they are hidden or hide controls if they are showing alternatively, pass in true to show controls or false to hide controls note - method does not update the stage returns object for chaining dispose() - clears keyboard events and grid PROPERTIES type - holds the class name as a String grid - access to grid Container numbersX - access to horizontal numbers numbersY - access to vertical numbers toggled - boolean - read only true if controls are showing or false if controls are hidden pixels - boolean - set to true to change to pixels, false to go to percent CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

Wrapper(items, width, spacingH, spacingV, wrapperType, align, valign, alignInner, valignInner, flip, reverse, bottomFull, colSize, rowSize, height, minSpreadNum, minStretchNum, percentVoidH, offsetVoidH, percentVoidV, offsetVoidV, minStretchFirst, style, group, inherit)

Wrapper zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION A Wrapper wraps its content to the next row at a given width The Wrapper is similar to the CSS Flexbox with the following: ALIGNMENTS: It has left, center/middle right then top, center/middle bottom alignments for whole rows and columns and then for inside the rows and columns. These may or may not be active depending on the wrapper type below WRAPPER TYPES: The types are spacing (default), spread, stretch, or column A colSize is available for the column type A rowSize is available that works with any of the above types SETTINGS: There are also flip, reverse, bottomFull and col/row void settings. MARGINS: ZIM display objects can have margins left, top, right, bottom that will shift objects relatively inside the Wrapper without affecting other objects in the wrapper. WRAPPER WITH WINDOW AND LAYOUT The Wrapper is resized automatically when added to a ZIM Window. Set the Window resizeHandle parameter to true to let the user resize. The Wrapper resizes and scales as a region in the ZIM Layout class. The Window also resizes - so a Wrapper can go in a Window in a Layout object. WRAPPER VS TILE The Tile is locked in to rows and columns and does not wrap content The Tile also has many responsive settings to squeeze, stretch, align, etc. Consider the Wrapper like FlexBox perhaps Grid with ColSize set - and the Tile like a Table WRAPPER VS LABEL The Label can wrap text using the labelWidth/lineWidth parameters (they are the same). The Wrapper is used to wrap objects - perhaps including a Label object. See https://zimjs.com/ten/wrapper.html NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const circles = [];
loop(40, ()=>{
   circles.push(new Circle(20, [orange, green, blue]));
});
const wrapper = new Wrapper(circles, 400, 20, 20).center();

interval(.5, ()=>{
   wrapper.resize(rand(300,500)).outline();
   S.update();
});

EXAMPLE

const win = new Window({
   width:500,
   height:400,
   titleBar:"Wrapper",
   titleBarBackgroundColor:yellow,
   scrollBarDrag:true,
   fullSize:true,
   resizeHandle:true,
   backgroundColor:lighter,
   padding:10
})
   .center()
   .add(new Wrapper({
      items:[
         new Circle(), new Rectangle(), new Triangle(),
         new Circle(), new Rectangle(), new Triangle(),
         new Circle(), new Rectangle(), new Triangle(),
         new Circle(), new Rectangle(), new Triangle(),
         new Circle(), new Rectangle(), new Triangle(),
         new Circle(), new Rectangle(), new Triangle()
      ],
      spacingH:10,
      spacingV:10,
      wrapperType:"spread"
   }));

CLOSE ▲

Tile(obj, cols, rows, spacingH, spacingV, unique, width, height, squeezeH, squeezeV, colSize, rowSize, align, valign, count, mirrorH, mirrorV, snapToPixel, clone, events, exact, scaleToH, scaleToV, scaleToType, backgroundColor, backgroundPadding, backgroundPaddingH, backgroundPaddingV, backing, backdropColor, backdropPadding, backdropPaddingH, backdropPaddingV, mat, style, group, inherit)

Tile zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION Tile has two main uses: 1. ART Creates a tile with an object for the columns and rows specified - a mirror effect is available too. By default the object is cloned. A ZIM VEE value can be passed to tile multiple types of objects 2. LAYOUT Set the unique parameter to true to pass in an array of unique objects ** Pre ZIM Cat, a series() would be used with the count set if required and clone set to false to keep object events Now this is handled by ZIM with the unique parameter, simplifying the process. The array could be thumbnail pictures, interface bars, content sections on a page, etc. Horizontal and vertical spacings can be set Setting colSize and rowSize will override spacings and force grid dimensions align and valign parameters can be used - or set with STYLE setting a width or height will spread the items - and override the colSize and rowSize In both dimensioned and non dimensioned modes, the rows and columns can be squeezed together and aligned as a group So a variety of layouts can be accommodated. See: three videos on laying out with Tile https://www.youtube.com/watch?v=J1dwD_wd_-U - components - using unique parameter https://www.youtube.com/watch?v=pjWxhqSSdww - custom widths - series https://www.youtube.com/watch?v=-eSVkCOshE8 - leader board example See: https://zimjs.com/tile.html for a dynamic example NOTE ZIM Layout() is also available to layout content that is scaled into regions NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const circle = new Circle();
const tile = new Tile(circle, 20, 10).center();

EXAMPLE

// tile 10 rectangles spaced out across the stage
const tile = new Tile({obj:new Rectangle(), cols:10, spacingH:30, width:W*.9}).center();

EXAMPLE

// tile two rows with a Dial and a Slider in each
const tile = new Tile({
   obj:[new Dial(), new Slider(), new Dial(), new Slider()],
   unique:true, // as of ZIM Cat
   cols:2, rows:2,
   spacingH:30, spacingV:30,
   valign:CENTER
}).center();
// use tile.getChildAt(0) to access first Dial - or:
tile.items[0].on("change", ()=>{zog("changing dial 1")});
// See next example if events are already on items

EXAMPLE

// Like the previous example but with events specified before Tile is made
// Using the change() method which is chainable because it returns the object
// (Do not chain an on() method for the event as it does not return the object)
const d1 = new Dial().change(()=>{zog("changing dial 1")});
const d2 = new Dial();
const s1 = new Slider();
const s2 = new Slider();
const tile = new Tile({
   obj:[d1, s1, d2, s2],
   // with unique true, it uses objects in order
   // without picking randomly and without cloning
   unique:true,
   cols:2, rows:2,
   spacingH:30, spacingV:30,
   valign:CENTER
}).center();
// or after
s2.change(()=>{zog("changing slider 2")});

EXAMPLE

STYLE = {
   background:{corner:20, borderColor:white},
   backdrop:{corner:{noPick:[20,20,0,0]}},
   Dial:{backgroundColor:white},
   Slider:{barColor:white, button:"pill"}
}
const d1 = new Dial().change(()=>{zog("changing dial 1")});
const d2 = new Dial();
const s1 = new Slider();
const s2 = new Slider();
const tile = new Tile({
   obj:[d1,s1,d2,s2],
   unique:true,
   scaleToH:80,
   scaleToV:60,
   cols:2, rows:2,
   spacingH:10,
   spacingV:10,
   align:CENTER,
   valign:CENTER,
   backgroundColor:new GradientColor([pink,purple],45),
   backdropColor:interstellar,
   backdropPaddingH:30,
   backdropPaddingV:-20
}).center();

EXAMPLE

// set the regX and regY for every tile item be the center of the tile
const tile = new Tile(new Rectangle(10, 10, red), 20, 20, 5, 5).normalize("reg", CENTER).center();
// make the central tile items be bigger than the edges (by 1.5 times in center)
tile.loop(t=>{t.sca(1+t.ratio*.5);});

CLOSE ▲

Pack(width, height, items, spacingH, spacingV, flatten, direction, lock, backgroundColor, align, valign, lastAlign, paddingH, paddingV, dragOrder, dragColor, dragThickness, dragDashed, reverse, funnel, showPacking, order, container, style, group, inherit)

Pack zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION Pack scales objects so they are packed within a width and height. This means that some objects will scale more than others. Pack works with the rectangular bounds of the objects. The Pack will most likely not fit exactly in the dimensions provided but it can be aligned or valigned within the dimensions and padding and backgroundColor set. The dragOrder parameter can be set to true to allow objects to be sorted. And the pack can be added to a TransformManager to remember the order on refresh. There are lots of subtle options with the main ones described below: FLATTEN If flatten is true (default) then Pack will integrate any trailing items so the Pack is completely rectangular. It may integrate at the start (default) or at the end - and it does so in two rows (or columns) to minify the effect. The effect will be that these two rows or columns will have somewhat bigger items. If flatten is false then the left over items can be aligned with lastAlign. Note that align and valign is for the placements of the whole pack in the dimensions provided. DIRECTION Direction HORIZONTAL (default) will order the items horizontally to fill a row then go to the next row (like a Tile). This will leave horizontal seams but will not necessarily fill the horizontal space - see LOCK below. Direction VERTICAL will order the items vertically along rows and when the column is done then go to the next column. This will leave vertical seams but will not necessarily fill the vertical space - see LOCK below. There is also a reverse parameter that will order these in the opposite direction (right to left or bottom to top). LOCK Lock HORIZONTAL will make the pack fit to the side edges - probably leaving a gap in the vertical. Lock VERTICAL will make the pack fit to the vertical top and bottom - probably leaving a gap in the horizontal. Lock can be set to AUTO to pick the best fit between these based on the largest area of the pack. ORDER There is a dragOrder parameter (default false) that can be set to true to let users drag items to change the order. This will repack each time. There are also getOrder() and setOrder() methods to record the order and pass it back in to the order parameter of Pack. This allows the app/content creators to try out different views and choose one. The pack can also be passed into a ZIM TransformManager() along with a persist ID to let users save their order. See: https://zimjs.com/zim/pack.html - pictures and saving See: https://zimjs.com/zim/pack2.html - in a resizeable window NOTE ZIM Tile() has squeeze which can squeeze the items in horizontally or vertically. ZIM Wrapper() will wrap items to fit best in rows or columns but both of these will not scale its items and the results will be ragged edges. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

new Pack(rand(200,600), rand(200,600)).center(); // packs three default rectangles

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) width - (default 500) the outer width of the pack object which will define the backgroundColor and enclose the content use the outerWidth property to change once the pack is made as the width property will just scale the pack. height - (default 500) the outer height of the pack object which will define the backgroundColor and enclose the content use the outerHeight property to change once the pack is made as the width property will just scale the pack. items - (default three colored Rectangles) set to an array of items to pack - can be pictures or any DisplayObject - even interactive the items property will reference this array as originally ordered (plus any items added or removed with addAt() or removeAt()) there is also a currentItems property that has the same items but in the latest order based on dragOrder or the order property spacingH - (default 10) set the horizontal spacing between the items - this is almost exact but may be a little less if direction horizontal and lock is vertical spacingV - (default 10) set the vertical spacing between the items - this is amost exact but may be a little less if direction vertical and lock horizontal flatten - (default true) merge any left-over items into the previous two rows to make the end flat direction - (default HORIZONTAL) order the items horizontally or vertically - this will create seams in the chosen direction lock - (default AUTO) set to VERTICAL to fit content from top to bottom (less padding) or HORIZONTAL to fit content to sides (less padding) set to AUTO to pick the direction that gives the largest content area. note: that this setting is independent of the direction the pack may not fit perfectly in the dimensions provided (probably not) so this setting specifies which side to lock to the align and valign parameters then can be used to align the content in the provided width and height backgroundColor - (default clear) set this to show a background rectangle behind the content dimensioned to the width and height align - (default CENTER) horizontal alignment of the content in the provided dimensions - if lock is vertical (also LEFT and RIGHT) valign - (default CENTER) vertical alignment of the content in the provided dimensions - if lock is horizontal (also TOP and BOTTOM) lastAlign - (default LEFT/TOP) if flatten is false the the alignment of the left over items use LEFT, CENTER, RIGHT for direction HORIZONTAL or TOP, CENTER, BOTTOM for direction VERTICAL paddingH - (default 0) the horizontal space between the outer dimension and the content paddingV - (default 0) the vertical space between the outer dimension and the content dragOrder - (default false) set to true to let users (or authors) drag the items to new positions this will re-pack the pack and possibly shift items to new columns or rows or even shift lock orientation if lock is AUTO dragColor - (default white) the color of the ghost rectangle and beacon diamond - also see ghost and beacon properties dragThickness - (default 2) the thickness of the ghost and beacon dragDashed - (default true) the dashed of the ghost reverse - (default false) set to true to reverse the pack order funnel - (default false) set to true to add fewer items to the edges causing a larger to smaller look when flatten is true showPacking - (default false) set to true to show packing steps at an interval of 1 second - for interest only order - (default null) set to an array of order data - see getOrder() get the array after dragging and setOrder() to dynamically set an order the format is [index, index, index, etc.] for each item where index is the new desired index for each original item also see TransformManager(pack, "id") to automatically save the current order and remake the pack in the last order on refresh container - (default stage) a container that holds the Pack - just used to place the beacon in the container style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS getOrder(popup) - get the current order of the pack if dragOrder is set to true - pass in true to see order in a ZIM Pane this can then be copied and pasted into the Pack() order parameter to start the pack at the desired order setOrder(order) - pass in an array of desired order - see the Pack() order parameter for more info - returns the object for chaining addAt(items, index) - pass a single or an array of items to add to the pack at the provided index (or at the end if no index) - returns the object for chaining removeAt(number, index) - remove the specified number of items at the provided index (or at the end if no index) - returns the object for chaining clone() - make a copy of the pack dispose() - removes listeners and deletes object ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String items - get the original items array passed to the pack (including addAt() and removeFrom() changes) currentItems - get the array of items in the current order (this may be different if dragOrder is true) cols - get the current number of columns rows - get the current number of rows iterations - get the number of times the pack was made to optimize its size flatten - get or set the flatten - see the Pack() flatten parameter direction - get or set the direction - see the Pack() direction parameter lock - get or set the lock - see the Pack() lock parameter order - get or set the current order of the pack - also see getOrder() and setOrder() dragOrder - get or set whether the items can be dragged to new positions outerWidth - remake the pack at this width - note: width just scales the pack like any DisplayObject outerHeight - remake the pack at this height - note: width just scales the pack like any DisplayObject spacing - get or set the spacing - will do both horizontal and vertical backing - a reference to the ZIM Rectangle used for the backgroundColor ghost - a reference to the ZIM Rectangle if dragOrder is true that is used to show dragging beacon - a reference to the ZIM Rectangle (at 45 rotation) if dragOrder is true that is used to show the inser point ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS dispatches a change event if items are re-ordered CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Beads(path, obj, count, angle, startPercent, endPercent, percents, onTop, showControls, visible, interactive, clone, group, style, inherit)

Beads zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION Beads adds objects around a Squiggle or Blob path. Different objects can be specified with ZIM VEE (Pick) values to put random or sequenced objects around path. The objects should have center registration for the most part. Although animating, wiggling or customizing the registration can be cool. The count of the object and the start and end percents can be specified Beads can be used to make dotted borders or bead-like art. The path can be any Squiggle or Blob - see https://zimjs.com/paths/ for example The beads property holds the beads and can be animated in sequence See https://zimjs.com/ten/beads.html for a mini-site of examples NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

new Beads({
   path:new Blob({points:"rectangle"}),
   obj:new Circle(5, series(red, blue)),
   visible:false,
   count:52
}).center();

EXAMPLE

const sun = new Beads({
   path:new Blob({color:yellow}), //.radialGradient([yellow,orange],[.2,.8],0,0,0, 0,0,100),
   obj:new Triangle(60, 60, 60, series(orange,yellow,red)).reg(null, 60),
   interactive:false,
   count:9
}).center().drag({all:true});

// here we animate the beads property of Beads - which holds only the beads (not the path)
// sequence is automatically set to 0 to animate each bead individually
// to animate all the beads, animate on the main beads object
// You can still set a sequence to a value to run a sequence
sun.beads.animate({
   props:{scaleY:1.7},
   time:{min:1.5, max:2},
   rewind:true,
   loop:true,
   // sequence:200
});

CLOSE ▲

Layout(holder, regions, lastMargin, lastMarginMin, backgroundColor, vertical, showRegions, scalingObject, hideKey, style, group, inherit)

Layout zim class - extends a createjs.EventDispatcher DESCRIPTION Layout arranges objects on the page by fitting (scaling) them in regions. Make a layout object for each page if desired and even nest layout objects inside regions. Fixed aspect ratio content is fit into regions. Layout is good for flexive design where you anchor titles and navigation. Layout handles any number of regions vertically or horizontally. It is useful for full scale mode for different devices or browser window scale. NOTE As of ZIM ZIM 02, a GlobalManager will be used to resize any Layout objects. SPECIAL: ** If the object in a region is a Wrapper, the wrapper will be scaled to fit the region width of a vertical Layout and the height of a horizontal Layout See: https://zimjs.com/ten/wrapper.html ** If the object in a region is a Window, the window will be scaled to the region. ** If the object is given a type="Region" then it will have its bounds set to the region size. This allows for another Layout to be nested within a region and scale to the inner region. For example: var content = new Container(500,500); content.type = "Region"; // this now will have its bounds set to the region size If the object is a Container (usual choice) then it must be given a starting width and height which will be reset to the region size and resized to continue to match the region size. SEE: https://zimjs.com/explore/layouts.html SEE: https://zimjs.com/cat/layout.html SEE: https://zimjs.com/pages SEE: https://codepen.io/zimjs/pen/oMRprj NOTE ZIM Tile is available to lay out non-scaled content NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// these would be containers with your content
// make sure that bounds are set on containers
// you may want to hard code bounds for clarity
const header = new Rectangle(500, 200, blue);
const content = new Rectangle(600, 500, green);
const footer = new Rectangle(500, 200, blue);
S.addChild(header, content, footer);

// make a vertical Layout - more useful for FULL scale mode
const layout = new Layout({
   holder:S,
   regions:[
      {obj:header, marginTop:10, maxWidth:80, minHeight:10, valign:TOP},
      {obj:content, marginTop:5, maxWidth:90}, // note, middle gets no minHeight
      {obj:footer, marginTop:5, maxWidth:80, height:10}
   ],
   lastMargin:5
});

// As of ZIM ZIM 02, A GlobalManager will automatically be added
// to resize any Layout objects

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) holder - object to hold layout (stage, container, etc) that must have bounds set regions - an array of region DisplayObjects with specific properties for each region (or array of DisplayObjects for defaults) Example VERTICAL region objects - all dimensions are percents [{obj:title, marginTop:10, maxWidth:80, minHeight:20, align:LEFT, valign:TOP}, {obj:content, marginTop:5, maxWidth:90}, // note, middle gets no minHeight {obj:nav, marginTop:5, maxWidth:80, height:20, backgroundColor:red}] note: no minHeight for middle regions - but heights on any region align defaults to middle for the regions valign defaults to top and bottom for the top and bottom region and middle for the others backgroundColor applies a backing color to the region only vertical GradientColor and centered RadialColor are supported at this time so use new GradientColor([blue,green]) or new GradientColor([orange, yellow]) Example HORIZONTAL region objects [{obj:col1, marginLeft:10, maxHeight:80, width:20, valign:"bottom"}, {obj:col2, marginLeft:5, maxHeight:90, align:MIDDLE}, // note, middle gets no minWidth {obj:col3, marginLeft:5, maxHeight:80, minWidth:20, align:LEFT, valign:TOP}] align defaults to left and right for the outer regions and middle for the inside regions valign defaults to top for all the regions ** See the SPECIAL section above in the description for Wrapper, Window and Region objects lastMargin - (default 0) the margin at the bottom (vertical) or at the right (horizontal) lastMarginMin - (default 0) the minimum margin at the bottom (vertical) or at the right (horizontal) backgroundColor - (default null) background color for the whole holder only vertical GradientColor and centered RadialColor are supported at this time so use new GradientColor([blue,green]) or new GradientColor([orange, yellow]) vertical - (default true) set to false for horizontal layout showRegions - (default null) show boundaries of regions (formerly regionShape) can toggle on and off with B key if this is set to true scalingObject - (default holder) an object used as the bounds of the region scaling setting a scalingObject will also set the bounds of the holder to the scalingObject bounds it does not scale the holder - only scales the region objects inside hideKey - (default B) is the hot key for hiding and showing the bounds METHODS resize() - resize based on new bounds of the holder (or scalingObject) toggle(state - default null) - toggle() will show controls if they are hidden or hide controls if they are showing alternatively, pass in true to show controls or false to hide controls note - method does not update the stage addShape(shape) - adds a bounding shape dynamically removeShape() - permanently removes the bounding shape disable() - disables all the layout (shape and sizing) enable() - enables all the layout (shape and sizing) dispose() - removes backgroundColors and bounds key event to get rid of the objects in the layout call dispose on those objects in the app PROPERTIES type - holds the class name as a String regions - the regions object - if changed will have to call resize() manually backing - the Shape that holds all the background colors toggled - read-only Boolean as to whether the controls are showing or hidden DESCRIPTION OF FLEXIVE DESIGN here described with vertical layout - horizontal is similar but rotated 90 the content in the middle will try and expand against the top and bottom until it forces the top and bottom to their minimum percents if the content hits its maximum width percent first then the top and bottom will fill up the rest of the height until they reach their maximum widths CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

Accessibility(appName, tabOrder, tabIndex, cycle, decimals, frame, application, alwaysHighlight, AHTime, AHColor, AHBorderWidth, AHBorderPadding, AHAlpha, AHObject, AHObjectScale)

Accessibility zim class - extends a createjs.EventDispatcher DESCRIPTION Adds Screen Reader accessibility to the canvas for TAB key or Swipe (mobile) highlighting of ZIM objects Some objects can be activated using the ENTER key and adjusted using the ARROW keys Default or custom titles can be set to be read by the Screen Reader The objects and the order in which the objects recieve focus can be set with a tabOrder array A text message can be passed to the talk() method and it will be read by a Screen Reader NOTE Instructions to activate a screen reader on desktop or laptop computers On Windows, you can type Narrator into Cortana and run it - it is really easy Scan mode must be turned off (Caps Lock - spacebar) On Mac, under Accessibility choose Voice Over On Android, under Accesibility choose Voice and turn on TalkBack Windows worked at ZIM 6, Apple worked at 6.1.0, Android worked at 6.1.0 aside from Slider, Dial, Stepper and ColorPicker Custom readers were not tested NOTE For Enter Key interactivity, use on("mousedown", f) or on("click", f) events - DO NOT use tap(f) NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const button = new Button().center(); // DO NOT use tap()
button.on("mousedown", ()=>{
   zgo("https://zimjs.com");
});
const dial = new Dial().center().mov(200);

const accessibility = new Accessibility();
// NOTE - on Narrator, scan mode must be turned off (Caps Lock - spacebar)
// this will automatically read in all objects on the stage and give default messages for the Screen Reader
// ENTER key events will be added to objects that will translate to mousedown and click events on the object
// Tab (swipe on mobile) to focus on the Button and press enter (double tap on mobile) to go to the ZIM site
// The Dial can use arrows to increase and decrease its value (up and right increase, down and left decrease)
// On mobile, double tapping the Dial brings up a select box with options (as does Slider, Stepper, and ColorPicker)

// OR

const accessibility = new Accessibility("Second Example");
accessibility.tabOrder = [
   dial,
   {obj:button, title:"Press ENTER to go to ZIM site"}
];
// this will start and end the app with "Second Example" being read (rather than default, "application")
// the dial will be the first item to tab to
// the button has a tabOrder object so it will have the title read rather than the default button message
// You could also provide a tabOrder object for the dial as well

NOTE Please see https://zimjs.com/screenreader for a detailed example NOTE Please see https://zimjs.com/accessibility for a more examples PARAMETERS supports DUO - parameters or single object with properties below appName - (default "application") read in screen reader when application receives or loses focus tabOrder - (default an array of all ZIM Display Objects on stage) an array of zim Display Objects These will be given TAB key control (and ENTER and ARROWS) and will work with Screen Readers Or given swipe left/right and double tap on mobile *** Alternatively, an array of tabOrder objects with an obj property and a title property can be used The obj is the Dispay Object and the title is what is read by the Screen Reader eg. {obj:button, title:"Press Enter Key to start game"} Can also specify tabOrder as a property of Accessibility *** The tabOrder may change compared to the array that is initially provided *** as RadioButtons, Picker, Tabs, and Pad components are split into separate items *** For objects not on the stage including a Pane, Waiter, etc. do not rely on the auto adding, use the parameter specified array instead. tabIndex - (default -1) - a starting index for focus - or can set tabIndex property after object is made cycle - (default false) set to true to keep tab order inside application rather than leaving application when an end is reached decimals - (default 2) number of decimals max to read for screen reader frame - (default currentFrame) the frame application - (default true - false on mobile) set to false to set role of buttons as buttons rather than application - may cause problems with NVDA unless set to forms mode alwaysHighlight - (default false) screen readers will add their own highlights - but this will set highlight to true even if there is no screen reader Set to true to place a rectangle around the object being put into focus by pressing the tab key or swipe on mobile This will replace screen reader highlights (eg. for Windows Narrator) except for when aria is true (eg. Apple Voice Over) The rest of the parameters relate to the alwaysHighlight - meaning highlight even if there is no screen reader AHTime - (default .7) seconds to show the alwaysHighlight (also see ZIM TIME constant) AHColor - (default brown) - the color of the alwaysHighlight rectangle AHBorderWidth - (default 3) thickness of border AHBorderPadding - (default 5) distance from object bounds outward towards border AHAlpha - (default .8) alpha of the alwaysHighlight AHObject - (default null) set to a display object - including animated objects - to override the rectangle as a alwaysHighlight object AHObjectScale - (default .8) scale the AHObject relative to the object with tab focus METHODS tab(dir) - set dir to 1 (default) to emulate tab forward or -1 to emulate shift tab changeTitle(target, title, activate) - change a title for the Screen Reader target - the tabObject (eg. button) or the tabIndex of the item in the tabOrder to change *** The tabOrder may change compared to the array that is initially provided *** as RadioButtons, Picker, Tabs, and Pad components are split into separate items title - the new title that will be read to the screen reader If no title is provided any component passed will just update to its value or index activate (default false) - set to true to set focus of item at index and send to Screen Reader talk(words) - tell the Screen Reader to read the words provided (does not affect focus) resize(target) - target is the object or index of the object to update - or do not pass a target to update all This needs to be done if the object is moved, scaled, or removed from / re-added to the stage Accessibility works by placing HTML tags behind the canvas where the ZIM objects exist - so resize() handles this Use the Frame resize event and optionally, the ResizeManager() dispose() - removes listeners and sets tabOrder to [] PROPERTIES type - holds the class name as a String tabOrder - get or set an array with the order in which display objects will receive focus with tab and shift tab (swipe on mobile) tabIndex - get or set the index of the tabOrder (also see currentObject) Setting works only if object at the index is on the stage Returns -1 if no tabOrder object has the focus currentObject - get or set the object in the tabOrder that has focus Objects have the following Accessibility properties added: zimAccessibility - the accessibility object zimTabIndex - the index in the tabOrder zimTabTag - the HTML tag that is used to represent the object to the screen reader zimTabParent - the parent of an object for RadioButtons, Tabs, and Pads (for others, the zimTabParent is the object) tabIndex - the index of the tag in tabParent (if there is a parent) type - the type of object. If there is a zimTabParent (that is not itself), the type is RadioButton, TabsButton or PadButton activatedObject - get the object in the tabOrder that was last clicked or had the ENTER key pressed on startAppTag - get the HTML tag that announces application start endAppTag - get the HTML tag that announces application end cycle - (default false) set to true to keep tab order inside application rather than leaving application when an end is reached decimals - (default 2) number of decimals max to read for screen reader frame - (default currentFrame) the frame alwaysHighlight - Boolean to use a alwaysHighlight rectangle AHTime - seconds to show the hightlight (also see ZIM TIME constant) AHColor - the color of the alwaysHighlight rectangle AHBorderWidth - thickness of border AHBorderPadding - (default 5)distance from object bounds outward towards border AHAlpha - alpha of the alwaysHighlight AHObject - set to a display object - including animated objects - to override the rectangle as a alwaysHighlight object AHObjectScale - scale the AHObject relative to the object with tab focus enabled - default is true - set to false to disable EVENTS Dispatches a "change" event when the screen reader is about to talk This is when the talk() method runs or the tabIndex is changed (from click, swipe, tab, changeTitle - with activate true) The event object has a title property that holds the words the screen reader will say Several change events can happen at the same time so what is said is usually the last but the talk() method takes priority as it runs in alert mode so focus is not lost The Enter key dispatches mousedown and click events from object with focus The event object has a fromEnter property which is true if from an enter key on the object This could trigger a button press for instance CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

TextureActive(width, height, color, color2, angle, borderColor, borderWidth, corner, interactive, animated, backingOrbit, pattern, scalePattern, style, group, inherit)

TextureActive zim class extends a zim Page which extends a ZIM Container which extends a createjs Container DESCRIPTION A TextureActive object is a Container that can be used as a CanvasMaterial in three.js. This allows ZIM to be mapped onto any material and mesh in three.js. For instance, ZIM can be used as interface panels in virtual reality. Any material can be made interactive so games and puzzles could be on walls, or any models. This has world-wide wonderful applications! NOTE used with three.js WORKINGS The TextureActive object can be passed into a ZIM TextureActives() object to be made interactive. The TextureActives object uses raycasting on the three.js material to provide CreateJS x and y coordinates. The three.js mesh must be passed to the TextureActives addMesh() method. The ZIM CreateJS 1.4.0 and later must be used as there are two settings: createjs.remotePointers and createjs.remoteQueue These prepare CreateJS to receive x and y from three.js and update TextureActive cache and material needsUpdate flag. SEE: https://zimjs.com/015/textureactive.html - panel with various components https://zimjs.com/015/textureactive_raw.html - same but without ZIM Three https://zimjs.com/015/textureactive2.html - first person interactive cylinders https://zimjs.com/015/textureactive3.html - model with scrambler https://zimjs.com/015/textureactive4.html - HUD, Noise, Synth https://zimjs.com/015/textureactive5.html - Physics https://zimjs.com/015/textureactive_hud.html - HUD affecting three object https://zimjs.com/015/textureactive_hud_raw.html - same but without ZIM Three XR TextureActive will detect if XR (AR/VR) is being used and will use the suitable Raycaster Additional classes are provided with the ZIM Three helper library for controllers, movement and teleport SEE: https://zimjs.com/015/vr.html - for example with Three and controllers (trigger), movement (sticks and squeeze) and teleport (B and Y buttons) EXAMPLE

import zim from "https://zimjs.org/cdn/015/zim_three";

new Frame(FIT, 1024, 768, darker, purple, ready);
function ready() {

   // PANEL
   const panel = new TextureActive({
      width:W,
      height:H,
      color:white.toAlpha(.8),
      corner:20
   });
   const circle = new Circle(100,red).center(panel).drag();

   // BACK OF PANEL
const backing = new TextureActive({
width:panel.width,
height:panel.height,
color:black,
corner:20,
animated:false,
interactive:false
});
TextureActive.makeBacking(backing.width, backing.height).addTo(backing); // CANVAS WINDOW

   const three = new Three({
width:window.innerWidth,
height:window.innerHeight,
cameraPosition:new THREE.Vector3(0,0,500),
textureActive:true
});

const renderer = three.renderer;
const scene = three.scene;
const camera = three.camera;

const controls = new OrbitControls(camera, three.canvas);

const textureActives = new TextureActives([panel, backing], THREE, three, renderer, scene, camera, controls, 1, 0, 1500);

// can capture raydown, raymove, rayup, rayover and rayout
textureActives.on("raymove", e=>{
// zog(e.intersect.distance);
});

const canvasWindow = three.makePanel(panel, textureActives);
scene.add(canvasWindow);

// BACK OF PANEL
const canvasWindowBacking = three.makePanel(backing, textureActives, true, .5) // transparent and alpha
scene.add(canvasWindowBacking);
canvasWindowBacking.rotation.y = 180*RAD; // flip it around the other way

// // IGNORE LIST
// // The ignoreList is handy if you want to interact with TextureActives through objects on the same layer
// // uncomment below to see an example of ignoring the red plane mesh so raycast will go right through to menu
// // note, this would be simpler to test if we did not apply the layer of 1 to the TextureActives
// // because if we did not set the mesh on layer 1 then it would already be ignored ;-)
// // keep the ignoreList commented to see that the red plane does not let the raycast past
// // and therefore activates the orbit controls.

// const geometry = new THREE.PlaneGeometry(100, 100, 1, 1);
// const material = new THREE.MeshBasicMaterial({
//     color:0xcc0000
// });
// const way = new THREE.Mesh(geometry, material);
// scene.add(way);
// camera.layers.enable(1);
// way.layers.set(1);
// way.position.z = 50;
// textureActives.ignoreList = [way];

} // end ready

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) width - (default zimDefaultFrame.width) the width of the TextureActive but backing is sized to screen.width if no width is provided height - (default zimDefaultFrame.height) the height of the Page but backing is sized to screen.height if no height is provided color - (default zim.light) the color of the TextureActive color2 - (default null) a second color which would form a zim.GradientColor() as the color angle - (default 90) the angle for the gradient if there is a gradient borderColor - (default null) the stroke color borderWidth - (default 1 if stroke is set) the size of the stroke in pixels corner - (default 0) the round of corner can also be an array of [topLeft, topRight, bottomRight, bottomLeft] inside this array can be arrays of [horizontal, vertical] which skews each corner can also be a combination array of values and skew arrays [topLeft, [horizontal, vertical], bottomRight, [horizontal, vertical]] interactive - (default true) set to false to not be interactive interactive will use raycasting in the TextureActives object to provide x and y to CreateJS which is then used by ZIM animated - (default true) set to false if no animation is necessary note that the animation will be true if interactive is true this tells ZIM to update the cache of the TextureActive every stage update backingOrbit - (default true) set to false to not allow oribitControls to rotate when pressed on backing pattern - (default null) a DisplayObject that will be added to the TextureActive above the backing For instance, import zim_pizzazz and use: makePattern("slants", series(grey,dark), 20, 52, 40).alp(.2) scalePattern - (default "fill") scale the pattern so it fills the window (formerly "bigger" or "outside") set to false for no scaling or: FIT or "fit" fits inside the TextureActive keeping proportion (formerly "smallest") FILL or "fill" fills the TextureActive keeping proportion (formerly "biggest" or "outside") FULL or "full" keeps both x and y scales - may stretch object (formerly "both") style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS clone() - makes a copy with properties such as x, y, etc. also copied - note, contents are not cloned dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. STATIC METHODS makeLogo(shade, mouse) - make the ZIM TextureActive logo shade is "light" (default) or "dark" and mouse is true or false (default) to receive interactivity used on the class like so: TextureActive.makeLogo().pos(0,50,CENTER,TOP,textureActive) See the top of the https://zimjs.com/015/textureactives.html panel makeBacking(width, height, text, color) - make a ZIM icon for the backing of a panel width and height default to 800 x 600 the text defaults to "CANVAS WINDOW" and the color defaults to light. See the back of the https://zimjs.com/015/textureactives.html panel PROPERTIES type - holds the class name as a String interactive - get whether the TextureActive is interactive animated- get whether the TextureActive is animated backingOrbit - get and set whether the TextureActive backing is controlled by orbit controls ALSO See ZIM Page for properties such as: backing, pattern, color ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS See the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

TextureActives(actives, threejs, zimThree, renderer, scene, camera, controls, layers, near, far, ignoreList, toggleKey, color, outerColor, damp, style, group, inherit)

TextureActives zim class extends a createjs EventDispatcher DESCRIPTION The ZIM TextureActive system allows ZIM to be used within three.js as a CanvasTexture for any material in any mesh. This can be animated and interacted with. For instance, ZIM can be used as interface panels in virtual reality. Any material can be made interactive so games and puzzles could be on walls, or any models. This has world-wide wonderful applications! TextureActives applies the interactivity to TextureActive objects and has an addMesh() method to register three.js meshes with their TextureActive A TextureActives object must be made after the TextureActive objects are made and after a three.js renderer, scene, camera and constrols are made. But it can be made before the meshes that use the TextureActive objects are made. Then either a Three.makePanel() or a textureActives.addMesh() method can be used to add TextureActive objects. NOTE used with three.js WORKINGS The TextureActive object can be passed into a ZIM TextureActives() object to be made interactive. The TextureActives object uses raycasting on the three.js material to provide CreateJS x and y coordinates. The three.js mesh must be passed to the TextureActives addMesh() method. The ZIM CreateJS 1.4.0 and later must be used as there are two settings: createjs.remotePointers and createjs.remoteQueue These prepare CreateJS to receive x and y from three.js and update TextureActive cache and material needsUpdate flag. SEE: https://zimjs.com/015/textureactive.html - panel with various components https://zimjs.com/015/textureactive_raw.html - same but without ZIM Three https://zimjs.com/015/textureactive2.html - first person interactive cylinders https://zimjs.com/015/textureactive3.html - model with scrambler https://zimjs.com/015/textureactive4.html - HUD, Noise, Synth https://zimjs.com/015/textureactive5.html - Physics https://zimjs.com/015/textureactive_hud.html - HUD affecting three object https://zimjs.com/015/textureactive_hud_raw.html - same but without ZIM Three XR TextureActive will detect if XR (AR/VR) is being used and will use the suitable Raycaster Additional classes are provided with the ZIM Three helper library for controllers, movement and teleport NOTE for XR, a layer must be set so the controllers do not get in the way of interactivity so in the TextureActives() set layer:1 and when adding meshes use addMesh(mesh, 1) SEE: https://zimjs.com/015/vr.html - for example with Three and controllers (trigger), movement (sticks and squeeze) and teleport (B and Y buttons) EXAMPLE (not XR)

import zim from "https://zimjs.org/cdn/015/zim_three";

new Frame(FIT, 1024, 768, darker, purple, ready);
function ready() {

// PANEL
const panel = new TextureActive({
   width:W,
   height:H,
   color:white.toAlpha(.8),
   corner:20
});
const circle = new Circle(100,red).center(panel).drag();

// BACK OF PANEL
const backing = new TextureActive({
   width:panel.width,
   height:panel.height,
   color:black,
   corner:20,
   animated:false,
   interactive:false
});
TextureActive.makeBacking(backing.width, backing.height).addTo(backing); // CANVAS WINDOW

const three = new Three({
   width:window.innerWidth,
   height:window.innerHeight,
   cameraPosition:new THREE.Vector3(0,0,500),
   textureActive:true
});

const renderer = three.renderer;
const scene = three.scene;
const camera = three.camera;

const controls = new OrbitControls(camera, three.canvas);

const textureActives = new TextureActives([panel, backing], THREE, three, renderer, scene, camera, controls, 1, 0, 1500);

// can capture raydown, raymove, rayup, rayover and rayout
textureActives.on("raymove", e=>{
   // zog(e.intersect.distance);
});

const canvasWindow = three.makePanel(panel, textureActives);
scene.add(canvasWindow);

// BACK OF PANEL
const canvasWindowBacking = three.makePanel(backing, textureActives, true, .5) // transparent and alpha
scene.add(canvasWindowBacking);
canvasWindowBacking.rotation.y = 180*RAD; // flip it around the other way

// // IGNORE LIST
// // The ignoreList is handy if you want to interact with TextureActives through objects on the same layer
// // uncomment below to see an example of ignoring the red plane mesh so raycast will go right through to menu
// // note, this would be simpler to test if we did not apply the layer of 1 to the TextureActives
// // because if we did not set the mesh on layer 1 then it would already be ignored ;-)
// // keep the ignoreList commented to see that the red plane does not let the raycast past
// // and therefore activates the orbit controls.

// const geometry = new THREE.PlaneGeometry(100, 100, 1, 1);
// const material = new THREE.MeshBasicMaterial({
//     color:0xcc0000
// });
// const way = new THREE.Mesh(geometry, material);
// scene.add(way);
// camera.layers.enable(1);
// way.layers.set(1);
// way.position.z = 50;
// textureActives.ignoreList = [way];

} // end ready

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) actives - a ZIM TextureActive object or an array of ZIM TextureActive objects also see the add() method these will be tiled in ZIM and used to be mapped as a CanvasTexture onto three.js materials for meshes see https://zimjs.org/spells.html?item=TextureActive threejs - reference to the three.js namespace zimThree - (default null) reference to the ZIM Three object if the Three helper module is used (saves lots of lines!) renderer - reference to the three.js renderer (if using Three, then three.renderer) scene - reference to the three.js scene (if using Three, then three.scene) if using more than one scene then make more than one TexureActives object camera - reference to the three.js camera (if using Three, then three.camera) if using more than one camera then make more than one TexureActives object controls - (default null) a three.js OrbitControls or FirstPersonControls other controls may work but are not directly accomodated layers - (default 0) a layer number from 0 to 31 or an array of layers this will instruct the raycaster to look at only the provided layers it is a good idea to specify 1 for instance and add TexureActive meshes to layer 1 the addMesh() method has a layer parameter that should match the layer number used here the Three makePanel() method will automatically add the panel mesh to the layer specified for the TextureActives object NOTE: for XR, layers must be set so the controls do not get in the way of interactivity near - (default undefined) - the start of the distance-from-camera range for the object to be interactive far - (default undefined) - the end of the distance-from-camera range for the object to be interactive ignoreList - (default null) - a mesh or array of meshes to ignore if between the camera and the TextureActive mesh by default, meshes on the same layer will prevent interactivity if between the camera and the TextureActive mesh if the mesh is not on the same layer then it will be ignored by default toggleKey - (default t) the key to toggle to or from the ZIM canvas and the three.js canvas this can be used to directly interact with the ZIM objects - good for testing the ZIM objects are tiled horizontally with a slider or swiping to pan across them the toggle can be deactivated by setting it to -1 or any time by setting the textureActives.manager.toggleKey to -1 the ZIM canvas and toggling is handled by the ZIM TextureActivesManager which is automatically made as soon as one TextureActives object is made color - (default darker) the color for the ZIM stage (when the toggle key is pressed) outerColor - (default black) the color of off the ZIM stage (when the toggle key is pressed) damp - (default .2) the damping of the TextureActivesManager - set to false for no damping style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS add(actives) - add a ZIM TextureActive object or an array of ZIM TextureActive objects or see the actives parameter of TextureActives remove(actives) - remove a ZIM TextureActive object or an array of ZIM TextureActive objects addMesh(mesh, layer) - add a three.js mesh to TextureActives at the optional layer - see the layer parameter of TextureActives also see the ZIM Three helper module makePanel() method to easily make a three.js Plane mesh with a TextureActive dispose() - removes event listeners - must still set outside references to null for garbage collection PROPERTIES type - holds the class name as a String interactive - get whether there are interactive TextureActive objects animated - get whether there are animated TextureActive objects manager - the ZIM TexureActivesManager object that handles toggling between the three.js canvas and the ZIM canvas this is used to interact directly with ZIM for testing, etc. and can be used to toggle between states and change or remove the key for toggling ignoreList - get or set the array of three.js meshes to ignore - see the ignoreList parameter of TextureActives raycaster - a reference to the three.Raycaster object if the TextureActives is interactive this is responsible for geting x and y coordinates on TextureActive materials and sending them to CreateJS where they replace the regular DOM mouse or pointer events raycast - get or set whether the raycaster is operational renderer - the three.js renderer layers - get an array of layers used by the raycaster actives - get an array of ZIM TextureActive objects currently being used - see add() and remove() threeMeshes - get an array of three.js meshes currently being used - see addMesh() and add() and remove() EVENTS raydown - dispatched when mouse is down on a ZIM TextureActive material raymove - dispatched when mouse is moving on a ZIM TextureActive material rayup - dispatched when mouse is up on a ZIM TextureActive material rayover - dispatched when mouse is moves over a ZIM TextureActive material rayout - dispatched when mouse is moves out from a ZIM TextureActive material CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

TextureActivesManager(stage, toggleKey, damp)

TextureActivesManager zim class extends a createjs EventDispatcher DESCRIPTION The TextureActivesManager is added automatically when a TextureActives object is made. There is only one TextureActivesManager made. It tiles all TextureActive objects across the ZIM stage (and beyond to the right). It adds a slider and swiper to view the objects. It adds a key (default t) and toggle() method to toggle between the three.js canvas and the ZIM canvas. SEE the TextureActive and TextureActives examples PARAMETERS stage (default the ZIMDefaultFrame's stage) the stage to operate on - provided internally toggleKey (default "t") the key to toggle the viewer - will be the key set by the FIRST TextureActives object made can be set with the toggleKey property to a different key or -1 to disable textureActives.manager.toggleKey = -1; // where textureActives is any TextureActives object damp (default .2) the damping of the Swiper (1 being no damping) METHODS toggle(state) - toggles objects - leave state off for toggle or pass in true to see or false to hide also see the toggle property and show() and hide() show() - show the ZIM canvas and hide the three.js canvas - also see toggle() hide() - hide the ZIM canvas and show the three.js canvas - also see toggle() dispose(obj) - disposes objects in the manager PROPERTIES type - holds the class name as a String toggled - whether the ZIM canvas is showing (true) or the three.js canvas is showing (false) also see the toggle() method toggleKey - get or set the key to toggle the TextureActives - default is "t" set to -1 to remove toggling with the key this would be expected for final versions also see toggleKey parameter of TextureActives tile - the tile containing the ZIM TextureActive objects objects - a ZIM Dictionary of the TextureActives objects provided that holds their textureActive objects color - get or set the color of the stage for the ZIM Canvas outerColor - get or set the color outside the ZIM Canvas backing - the backing rectangle used for the swiper - this has a faint color nav - access to the ZIM Panel for the nav slider - access to the ZIM Slider for the nav swiper - access to the ZIM Swiper for swiping the panel - note, only works outside the TextureActive CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Manager()

DEPRECATED - as of ZIM ZIM 02, a GlobalManager is added to handle any resizing Manager zim class DESCRIPTION used internally to make ResizeManager, GridManager and GuideManager and in future perhaps OutlineManager METHODS ** all methods return the manager for chaining except dispose which returns true add(obj) - registers a object or array of objects with the manager ** the following methods will operate on all objects in manager if the object parameter is left empty ** if a specific object or an array of objects is provided then the methods will operate on those objects remove(obj) - removes objects from the manager resize(obj) - resizes objects in the manager toggle(state, obj) - toggles objects - leave state off for toggle or pass in true to see or false to hide dispose(obj) - disposes objects in the manager CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

ResizeManager()

DEPRECATED - as of ZIM ZIM 02, a GlobalManager is added to handle any resizing ResizeManager zim class extends zim.Manager abstract class DESCRIPTION Add objects with a resize() method to a ResizeManager object and call a single resize() on the ResizeManager object This will most likely go in a resize event on the Frame Works with objects such as Layout, Pages, Grid, Guide, Accessibility, Loader and TextArea NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const resizeManager = new ResizeManager();
resizeManager.add([pages, layout, accessibility]);
// where these three objects have already been made
// *** Note that the Loader and TextArea are already resized if added to an Accessibility object that is resized
F.on("resize", ()=>{
   resizeManager.resize(); // without ResizeManager you would make three different resize() calls
})

METHODS add(obj) - adds object or an array of objects to the ResizeManager - returns the manager for chaining *** Note that the Loader and TextArea are already resized if added to an Accessibility object that is resized remove(obj) - removes object or an array of objects from the ResizeManager - returns the manager for chaining resize() - calls the resize() method of any object in the ResizeManager - returns the manager for chaining dispose() - disposes the objects in the ResizeManager and the ResizeManager itself PROPERTIES type - holds the class name as a String items - get or set an array of objects currently in the Manager CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

TransformManager(objects, persistID)

TransformManager zim class extends CreateJS EventDispatcher DESCRIPTION Manages multiple objects with transform() methods set. Can use to show, hide, hideAll, add, remove and resize transform controls. Also works with Squiggle(), Blob(), Layer(), Connectors() and Pack(). Can be used to automatically save any transforms and reload them again on refresh of Browser / App. This uses localStorage. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const rect = new Rectangle(300, 200, green)
   .centerReg()
   .mov(-200)
   .transform();

const circ = new Circle(100, red)
   .centerReg()
   .mov(200)
   .transform();

const tm = new TransformManager([rect, circ], "sample");
// or use methods:
// tm.add([rect, circ]);
// tm.persist("sample"); // or add later to save transforms

PARAMETERS objects - (default null) adds the object(s) to the Transform Manager pass in a single object or an array of multiple objects persistID - (default null) String id to make ZIM remember transforms of objects (uses localStorage) METHODS add(obj) - adds object or an array of objects to the TransformManager remove(obj) - removes object or an array of objects to the TransformManager show(obj) - show controls for an object that has a transform() set hide(obj) - hides controls for an object that has a transform() set - still available with click hideAll() - hides all controls - still available with click resize() - calls the resize() method of any object in the ResizeManager persist(id) - save data after every change and reload transforms when done - must provide an id clearPersist(id) - clear persisting data - do this before adding shapes - must provide an id savePersist() - with persist() already set, this will force a saving even without a transform event being captured if resize() after non-transform movement is called, then this is not needed stopPersist() - no longer save data dispose(removePersist, removeControls) - default just removes manager - keeps the data set removePersist to true to remove the persist data set removeControls to true to remove the transforms and beziers of all the items PROPERTIES type - holds the class name as a String items - get or set (set not recommended) an array of objects currently in the TransformManager currentObject - the last item to get transform tools if it still has the transform tools active persistData - gets the persist data if it exists EVENTS Dispatches a "transformed" event when pressup on any of the controls or on click transformed event object has transformObject and transformType properties the transformType property has values of: FOR TRANSFORM: "select" (if not moved), "size", "move", "rotate", "stretch", "reg" "reset" FOR BLOB, SQUIGGLE: "move", "bezierPoint", "bezierHandle", "bezierSwitch" FOR CONNECTORS: "connection" FOR PACK: "change" Adds "transformshow" and "transformhide" events for when click to hide or show controls these have a transformObject property to indicate what was shown or hidden Dispatches, on each object, a "persistset" event when persist data is ready - could be delayed 50ms due to Layer being created Dispatches a "persistcomplete" event when all persist data has been set + 100ms for layers to be set before applying controls CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

GuideManager()

DEPRECATED - as of ZIM ZIM 02, a GlobalManager is added to handle any resizing GuideManager zim class - extends the ZIM Manager abstract class DESCRIPTION Add Zim Guide objects to a GuideManager object and update or remove all guides at once. Guides are handy to use but perhaps annoying to update and remove if you have many. GuideManager keeps track of the guides and lets you update or dispose of them on command. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const manager = new GuideManager();
manager.add(new Guide());
manager.add(new Guide(false));

// or with pixels
// manager.add(new Guide(true, false));
// manager.add(new Guide(false, false));

// then you can remove all guides with
// manager.dispose();
// handy with guides on multiple Pages

// and in frame resize event we can resize all guides:
F.on("resize", ()=>{manager.resize();})

PROPERTIES type - holds the class name as a String items - an array of all Guide objects added with add() METHODS add(guide) - registers a guide with the GuideManager remove(guide) - removes guide from register resize() - resizes all the guides in the GuideManager (ie. if stage changes) toggle(state - default null) - toggle() will show controls if they are hidden or hide controls if they are showing alternatively, pass in true to show controls or false to hide controls note - method does not update the stage dispose() - disposes all guides and the GuideManager NOTE to just hide guides, you use the G key and to toggle percent and pixels use the P key you can dispose guides individually or use this class to dispose all disposing will remove the G, P key listener and the guide CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

GridManager()

DEPRECATED - as of ZIM ZIM 02, a GlobalManager is added to handle any resizing GridManager zim class - extends a zim.Manager DESCRIPTION Add Zim Grid objects to a GridManager object and update or remove all grids at once. Grids are handy to use but perhaps annoying to update and remove if you have many. GridManager keeps track of the grids and lets you update or dispose of them on command. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const manager = new GridManager();
manager.add(new Grid());

// or with pixels
// manager.add(new Grid(null, false));

// then you can remove all grids with
// grid.dispose();
// handy with guides on multiple Pages

// and in frame resize event we can resize all grids:
F.on("resize", ()=>{manager.resize();})

METHODS add(grid) - registers a grid with the GridManager remove(grid) - removes grid from the register resize() - resizes all the grids in the GridManager (ie. if stage changes) dispose() - disposes all grids and the GridManager NOTE to just hide grids, you use the G key and to toggle percent and pixels use the P key you can dispose grids individually or use this class to dispose all disposing will remove the G key listener and the grid PROPERTIES type - holds the class name as a String items - an array of all Grid objects added with add() CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

LayoutManager()

DEPRECATED - as of ZIM ZIM 02, a GlobalManager is added to handle any resizing LayoutManager zim class - extends a zim.Manager DESCRIPTION Add Zim Layout objects to a LayoutManager object and update them all at once. You can remove all layout region bound shapes at once as well as remove the B key to show the region bound shapes. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// these would be containers with your content
// make sure that bounds are set on containers
// you may want to hard code bounds for clarity
const header = new Rectangle(500, 200, blue);
const content = new Rectangle(600, 500, green);
const footer = new Rectangle(500, 200, blue);
S.addChild(header, content, footer);

// make the Layout - more useful for FULL scale mode
const layout = new Layout({
   holder:stage,
   regions:[
      {obj:header, marginTop:10, maxWidth:80, minHeight:10, valign:TOP},
      {obj:content, marginTop:5, maxWidth:90}, // note, middle gets no minHeight
      {obj:footer, marginTop:5, maxWidth:80, height:10}
   ],
   lastMargin:5
});

// add to LayoutManager to resize or dispose all layouts together
const manager = new LayoutManager();
manager.add(layout);

F.on("resize", ()=>{
   manager.resize();
   S.update();
});

S.update();

METHODS ** all methods return the manager for chaining add(layout) - registers a layout or array of layouts with the manager ** the following methods will operate on all layouts in manager if the layout parameter is left empty ** if a specific layout or an array of layouts is provided then the methods will operate on those layouts remove(layout) - removes layouts from the manager resize(layout) - resizes layouts in the manager toggle(state, layout) - toggles layout region bounds - leave state off for toggle or pass in true to see or false to hide dispose(layout) - disposes layouts in the manager - including backgroundColors but not objects in the layouts NOTE to just hide bounds, you use the B key PROPERTIES type - holds the class name as a String items - an array of all Layout objects added with add() CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

SelectionSet(selections)

SelectionSet zim class DESCRIPTION Keeps track of selected objects or indexes, etc. Just a wrapper for array manipulation: Uses isSelected instead of indexOf()>=0 Uses remove() instead of splice(index, 1), etc. Handles multiple select, matching other SelectionSet objects for add and remove, etc. Use with a SelectionManager to control multiple Selection Set objects at once. See: https://zimjs.com/explore/selectionTest.html NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const selectedTriangles = new SelectionSet();
const triangles = new Tile(new Triangle(), 5, 1, 50).center().mov(0,-200).cur();
triangles.on("click", e=>{
   selectedTriangles.toggle(e.target, F.ctrlKey); // multiple if ctrl down
   // need to loop through all to update
   triangles.loop(triangle=>{
      triangle.color = selectedTriangles.isSelected(triangle)?pink:black;
   });
   S.update();
});

PARAMETERS selections - (default []) an array of selected items or indexes, etc. METHODS clear() - clear selections isSelected(item) - returns true if item is selected else false toggle(item, multiple, match, unmatch) - toggle the item which calls add or remove below this is probably the most handy method - see parameter description below add(item, multiple, match, unmatch) - add an item multiple will not remove other selected items match - pass in another SelectionSet to add the same item or index unMatch - pass in another SelectionSet to remove the same item or index if there remove(item, multiple, match, unmatch) - remove an item multiple will not remove other selected items match - pass in another SelectionSet to remove the same item or index unMatch - pass in another SelectionSet to add the same item or index if there dispose() - clears list and sets to null PROPERTIES type - holds the class name as a String items - an array of all Layout objects added with add() CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

SelectionManager(sets, multipleKey, multipleSets)

SelectionManager zim class extends a CreateJS EventDispatcher DESCRIPTION Add Zim SelectionSet objects to a SelectionManager object and control multiple selection sets. Used internally to control Squiggle and Blob point selections for multiple drags and mousemoves Also provides key events along with undo event See: https://zimjs.com/explore/selectionTest.html NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// manage two sets of SelectionSet objects:
const selectedCircles = new SelectionSet();
const selectedRects = new SelectionSet();
// add SelectionSet objects to manager and set ctrl to be multiple select
const selectionManager = new SelectionManager([selectedCircles, selectedRects], "ctrl");

const circles = new Tile(new Circle(), 5, 1, 50).center().cur();
const rects = new Tile(new Rectangle(), 5, 1, 50).center().mov(0,100).cur();
circles.on("click", e=>{
   // toggle current selected - SelectionManager will handle multiple select
   selectedCircles.toggle(e.target);
   setColors();
});
rects.on("click", e=>{
   selectedRects.toggle(e.target);
   setColors();
});
// need to loop through all objects to make sure their color did not change
function setColors() {
   circles.loop(circle=>{
      circle.color = selectedCircles.isSelected(circle)?red:black;
   });
   rects.loop(rect=>{
      rect.color = selectedRects.isSelected(rect)?red:black;
   });
   S.update();
}

PARAMETERS sets - (default null) a ZIM SelectionSet object or an array of SelectionSet objects to manage multipleKey - (default null) a key ("shift", "ctrl", "meta", etc.) to use for multiple select (only within a SelectionSet) multipleSets - (default true) set to false to only allow one set at a time to be selected on METHODS clear() - clears all SelectionSet objects in the SelectionManager setCurrent(set) - sets the privided SelectionSet to the currentSet and clears the others dispose() - removes key events PROPERTIES type - holds the class name as a String sets - an array of all the SelectionSet objects multipleKey - the key provided for multiple select ("shift", "ctrl", etc) - do not add "Key" as in "shiftKey" multiple - true if the multipleSelect key is being pressed otherwise false ctrlKey - true if the ctrlKey key is being pressed otherwise false shiftKey - true if the shiftKey key is being pressed otherwise false metaKey - true if the metaKey key is being pressed otherwise false EVENTS dispatches an "undo" event if a CTRL or META plus the U key is pressed CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Bind(connection, bindType, master, masterFilter, couple, smartDecimals, report, setDefault)

Bind zim class DESCRIPTION Binds DisplayObject properties to data, for instance localStorage or server data The property values can be any JSON valid data such as Number, String, Array or Object Literal NOTE see bind() methods of DisplayObjects like Containers, ZIM Shapes, Shapes, Bitmap, etc. NOTE see ZIM Base() in PHP for database access https://zimjs.com/php/base.zip NOTE see ZIM Skool Data lesson 09 https://zimjs.com/skool/lesson09.html And asociated videos here https://zimjs.com/learnjavascript.html#lesson09 Bind has to() and from() methods that can be used to update data and properties as desired. to() saves data and from() gets data and sets object properties. These have filters to specify on which ids, objects or properties to act. LOCALSTORAGE, POST and GET is supported as are these global ZIM constants. The data has JSON.strigify() applied and will be sent as a data property Bind has a master parameter that will be sent with all to() and from() calls to() and from() calls will send a command property of either "to" or "from" There is also an extra property that can be used to send an id, search term, etc. These can be collected, for instance in PHP, as follows depending on the bindType $_GET["data"], $_GET["master"], $_GET["command"], $_GET["extra"], $_GET["unique"] or $_POST["data"], $_POST["master"], $_POST["command"], $_POST["extra"], $_POST["unique"] Separating the data from the master, command and extra more readily allows JSON storage GET uses ZIM asnyc() which is JSONp based and overcomes Cross Origin security issues GET has a limit of 2048 - some servers are more but some are not POST uses ZIM Ajax() which will work with the same server or one with CORS set accordingly POST has a limit of roughly the computer memory LOCALSTORAGE is also supported which stores the data on the user's computer See: https://zimjs.com/ten/bind.html NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// LOCALSTORAGE example - synchronous so do not need callback
const b = new Bind();
// b.clear(); // clear localStorage memory

// circle's location will be remembered
const c = new Circle().center().bind("circle", ["x","y"]).drag();
c.on("pressup", ()=>{b.to();});

// TextArea's text will be remembered
const t = new TextArea().center().mov(0,-100).bind("text", ["text"]);
t.on("input", ()=>{b.to();});

EXAMPLE

// A GET example - POST is the same - see comments in PHP template...

// get unique user id from components, etc.
// this could be added to the url for get
// but we will pass it in as master data which works for get or post
// to tell the to() and from() methods to always pass this master variable
var uid = "bindTest";
var url = "https://zimjs.com/ten/bind.php";

// from() will get any data from the url and store in Bind as data
// this will then be used as each object is bound
const b = new Bind(url, GET, uid).from(()=>{

   const c = new Circle(100,red)
      .loc(rand(W), rand(H))
      // the bind will also set properties to existing Bind data
      .bind("circle", ["x","y","level"])
      .drag();

   c.on("pressup", function() {
      // to() will send data to the server
      b.to();
   });

   const r = new Rectangle(200,200,blue)
      .loc(rand(W-200), rand(H-200))
      .bind("rect", {x:BOTH, y:BOTH, level:BOTH, alpha:TO})
      .drag();

   r.on("pressup", ()=>{
      b.to();
   });

   // b.to(); // would store random locations to start

   // would clear bindings and data
   // b.removeAllBindings(true, function (response) {
   //     zog(response);
   // });

   S.update();
});

// A PHP Template for GET with notes for POST
// See: https://zimjs.com/ten/bind.html for a full example with MySQLi database code
// Also: https://zimjs.com/base.html for easy binding to PHP
<?php

// ZIM Bind as of ZIM 10.9.0
// ZIM supports data binding of JSON ready properties on objects
// here is an example of the structure for binding to a database with GET
// GET uses ZIM async() which uses JSONp rather than AJAX
// POST uses ZIM ajax() and is similar - use for larger data
// SEE: https://zimjs.com/base.html for simplified PHP

header('Content-type: text/javascript');

// ZIM Bind sends the following variables
// in this case, master is an id
// data is the JSON data to store
// command will be "to" or "from" to store or retrieve data
// extra could be a search term, etc. but not used in this example

// for POST - change these to $_POST["master"], etc.
$master = isset($_GET["master"]) ? $_GET["master"] : "";
$data = isset($_GET["data"]) ? $_GET["data"] : "";
$command = isset($_GET["command"]) ? $_GET["command"] : "";
$extra = isset($_GET["extra"]) ? $_GET["extra"] : "";

if ($command == "to") {

   // ZIM Bind.to() will send a data property in JSON format:
   // '{"id1":{"prop1":"value", "prop2":"value"}, "id2":{"prop3":"value"}}'
   // the JSON string can be stored at the id in the database
   // or separate fields can be stored by parsing the JSON data
   // looping and filling specific fields

   // check for master id
   if ($master=="") {echo "async.callbackTo('error: no id')"; exit;}

   // put data into database at id using MySQLi or PDO, etc.
   // then echo success or error in the following async format
   echo "async.callbackTo('success')";
   // echo "success"; // FOR POST

} else if ($command == "from") {

   // Bind from() requests the information
   // If all the data is requested then the data will be the string 'full'
   // so return the JSON string stored at the id for instance.
   // requests might also be provided in the following format:
   // '{"id":["prop1","prop2"], "id2":["prop3"]}'
   // and then return the data for the fields requested as a JSON string:
   // '{"id1":{"prop1":"value", "prop2":"value"}, "id2":{"prop3":"value"}}'

   // check for master id
   if ($master=="") {echo "async.callbackFrom('error: no id')"; exit;}

   // get data from database using MySQLi or PDO, etc.
   // return data in the following async format - for example:
   $json = '{"circle":{"x":200,"y":200},"rect":{"x":300,"y":300,"alpha":1}}';
   echo "async.callbackFrom($json)";
   // echo $json; // FOR POST

} else if ($command == "removeAll") {

   // if we want to reset the data the Bind object's removeAllBindings
   // can be called - the removeConnectionData defaults to true
   // and a command of "removeAll" will be called on the server

   // check for id
   if ($master=="") {echo "async.callbackRemoveAll('error: no id')"; exit;}

   // delete data from database using MySQLi or PDO, etc.
   echo "async.callbackRemoveAll('success')";
   // echo 'success'; // FOR POST
}
?>

PARAMETERS ** supports DUO - parameters or single object with properties below connection - (default "zimBind") a localStorage string "example" or a URL to a server script bindType - (default LOCALSTORAGE) or set to GET or POST For GET and POST a GET variable called type will be sent with either "get" or "post" value This is captured by ZIM Base() on the PHP side and used to manage variables and responses. LOCALSTORAGE - stores data in localStorage on the users computer and is syncronous so all data is automatically stored on to() and from() GET - sends data to a server script such as PHP or node using ZIM async() and JSONp as such, this should work from local computers and across different domains extra information can be placed on the URL in CGI format ?prop=value&prop=value the values (only) should be encodeURI() if spaces or special characters there is a limit of approximately 2048 characters POST - sends data to a server using an object which gets JSON.stringify applied this object can be retrieved via $_POST["data"] in PHP, etc. extra information can be placed on the URL in CGI format ?prop=value&prop=value the values (only) should be encodeURI() if spaces or special characters there is virtually no limit to the amount of data files will need to be on the same server or a CORS header set up master - (default null) information to send with each server call (not localStorage) this could be an id, etc. and will have encodeURIComponent() applied eg. in php it can be received as $_GET["master"] or $_POST["master"] depending on bindType masterFilter - (default null) a function to run before TO and after FROM this will receive the data (plus command and extra) command will be "to", "fromTo", "from", or "remove" - see to(), from(), remove() for details and must return the data - but the function can operate on the data eg. if data.id = "1_a" the filter function can set data.id = data.id.split("_").join(""); The function must return data - this will modify before sending and after receiving If only one direction is desired use the command parameter in a conditional eg. if (command=="to") {etc.} - make sure to return the data in all cases couple - (default false) - set to true to turn nested JSON into a single layer The object will have _ between the id and the property name eg. {"circle":{"x":"10", "y":"20"},"count":{"value":"0"}} is: {"circle_x":"10", "circle_y":"20", "count_value":"0"} This allows data to be JSON decoded on the server and put more directly into table fields of the database The data will be automatically decoupled back to a double layer object on retrieval smartDecimals - (default true) numbers > 1 have 1 decimal, numbers < 1 have two decimals report - (default false) set to true to receive console Bind reports of each bind result setDefault - (default null) by default the first Bind object is the zimDefaultBind object The zimDefaultBind is what DisplayObject bind() method will use unless bindObj is specified. Set the setDefault parameter to true to override any previous Bind objects as the default bind object. See also the default property METHODS ** all methods return the object for chaining add(id, obj, props, extra, filter) - adds a DisplayObject (Container, Bitmap, Circle, etc.) to the Bind object or use bind(id, props, filter, bindObj) method of DisplayObjects will also set properties to current Bind properties for GET and POST or get latest data for LOCALSTORAGE id - a string identifier - one id per object obj - a DisplayObject (display objects can have more than one id) props - an property as a string or an array of properties as strings extra (default null) extra information to be sent to the server (not localStorage) this could be an id or a search term, etc. it will have encodeURI() applied this can be received in php as $_GET["extra"] or $_POST["extra"] depending on bindType filter - (default null) a function to run before sending and after receiving data this will receive (data, command, extra, process) parameters command will be "to", "fromTo", "from", or "remove" - see to(), from(), remove() for details calling process.stop() will stop the current to() or from() call from proceeding the function must return the data - see Bind masterFilter parameter for more information note: the masterFilter if supplied will run as well before the filter remove(targets, props, extra, filter, removeConnectionData, call) - remove a bind targets (default null) an object or id or an array of ids or objects to remove binds props (default null) a property or an array of properties to remove binds on only those properties or pass both targets and props to remove only properties on provided id or objects extra (default null) extra information to be sent to the server (not localStorage) this could be an id or a search term, etc. it will have encodeURI() applied this can be received in php as $_GET["extra"] or $_POST["extra"] depending on bindType filter (default null) a function to run before removing this will receive (data, command, extra, process) parameters - command will be "remove" calling process.stop() will stop the current to() or from() call from proceeding the function must return the data - see Bind masterFilter parameter for more information note: the masterFilter and the bind filter if supplied will run as well before the filter removeConnectionData (default true) remove connection data this will clear removed data from localStorage for LOCALSTORAGE setting a "remove" property will be sent to the server for GET or POST with a JSON {id1:["prop1","prop2"], id2:["prop3"]} format of removed items call is a callback function after the data is sent and received the callback function will receive a result "success" or "error ..." in its parameter from(call, targets, props, extra, filter) - get bind data from the connection (localStorage or database) ** accepts ZIM DUO normal parameters or configuration object literal with parameter names as propterties from() will also send to the server a command property with the value "from" (not for localStorage) in php this can be received as $_GET["command"] or $_POST["command"] depending on bindType call is a callback function after the data is received the callback function will receive data in its parameter of the data set the properties of the objects are set automatically by bind ** the targets and props must have already been bound by bind.add() or obj.bind() targets (default null) is an object or id or array of objects or ids to receive the data props (default null) properties to receive the data or both targets and properties for properties of the targets to receive the data extra (default null) extra information to be sent to the server (not localStorage) this could be an id or a search term, etc. it will have encodeURI() applied this can be received in php as $_GET["extra"] or $_POST["extra"] depending on bindType filter (default null) a function to run before sending and after receiving data this will receive (data, command, extra, process) parameters command will be "fromTo" when sending data to server (requesting data) command will be "from" when receiving data from the server calling process.stop() will stop the current to() or from() call from proceeding the function must return the data - see Bind masterFilter parameter for more information note: the masterFilter and the bind filter if supplied will run as well before the filter to(targets, props, extra, filter, smartDecimals, call) - send bind data to the connection (localStorage or database) ** accepts ZIM DUO normal parameters or configuration object literal with parameter names as propterties to() will also send to the server a command property with the value "to" (not for localStorage) in php this can be received as $_GET["command"] or $_POST["command"] depending on bindType ** the targets and props must have already been bound by bind.add() or obj.bind() targets (default null) is an object or id or array of objects or ids to send the data props (default null) properties to send the data or both targets and properties for properties of the targets to send the data extra (default null) extra information to be sent to the server (not localStorage) this could be an id or a search term, etc. it will have encodeURI() applied this can be received in php as $_GET["extra"] or $_POST["extra"] depending on bindType filter (default null) a function to run before sending data this will receive (data, command, extra) parameters - command will be "to" calling process.stop() will stop the current to() or from() call from proceeding the function must return the data - see Bind masterFilter parameter for more information note: the masterFilter and the bind filter if supplied will run as well before the filter smartDecimals (default bind smartDecimals) override the bind smartDecimals set to true to send numbers > 1 with 1 decimal or numbers < 1 with 2 decimals call is a callback function after the data is sent and received the callback function will receive a result in its parameter often with a success or error property or string toUnique(targets, props, extra, filter, smartDecimals, call) - send bind data to the connection along with a unique=true variable This is the same as to() but sends a unqiue=true variable The unique variable can be tested for on the server and an appropriate resonse can be returned For instance, return false if the extra variable is being used as a key and it is not unique In normal binding, we would want to then update but is some cases, we might be trying to add a unqique object to bind to in the future toLock(targets, props, extra, filter, smartDecimals, call) - like a to() but prevents old data from being stored A filter with command=="from" must be used to adjust data - see below for more. Use when multiple people are appending to or updating the same JSON data object. Do not use if users are simply overwriting all the data - just use a to() for that. SCENARIO: Imagine that there is a bind to a TextArea() filled with user comments Traditionally, each comment would be stored as a record (row) in the database table With binding, it is easier to store these as a JSON string in one record If two users have the JSON object at the same time and one updates the JSON object, the second user will not receive this update so their JSON object will be out of date When the second user sends their JSON object it will overwrite the first user's update The first user's update will be lost SENARIO: Imagine that there is a five star system that stores total stars and total voters in a JSON object It would be bad for a user to initially collect this data and then twenty minutes later, write to this data without getting the latest data. SOLUTION: toLock() solves this by fetching the latest data just before a user wants to update. This data is available in a filter when command=="from". The DATA MUST BE MODIFIED in the filter. Then return the modified data and toLock() sends the modified data to the server. -- SERVER -- ZIM Base should be used in the PHP code - see https://zimjs.com/base/ -- the database table should have a field called lockid of type varchar -- in the $command=="from" the record should be locked as follows: -- if ($lockid) $base->setLock("table_name", $id, $lockid); -- this assumes you are updating a record with an id - this can adjusted - see ZIM Base. ** accepts ZIM DUO normal parameters or configuration object literal with parameter names as propterties ** the targets and props must have already been bound by bind.add() or obj.bind() targets (default null) is an object or id or array of objects or ids to send the data props (default null) properties to send the data or both targets and properties for properties of the targets to send the data extra (default null) extra information to be sent to the server (not localStorage) this could be an id or a search term, etc. it will have encodeURI() applied this can be received in php as $_GET["extra"] or $_POST["extra"] depending on bindType filter (default null) a function that will run three times during the process this will receive (data, command, extra) parameters the commands for the three times will be: command "fromTo" before the from request for current data is sent and the record is locked command "from" current data is received but before bound properties are set with current data it is here that new data can be added to or updated in the filter data object as the data object is about to be used to update the bound properties command "to" before new properties are sent to be stored and the record unlocked calling process.stop() will stop the current to() or from() call from proceeding the function must return the data - see Bind masterFilter parameter for more information note: the masterFilter and the bind filter if supplied will run as well before the filter smartDecimals (default bind smartDecimals) override the bind smartDecimals set to true to send numbers > 1 with 1 decimal or numbers < 1 with 2 decimals call is a callback function after the data is sent and received the callback function will receive a result in its parameter often with a success or error property or string stop() - stops current to() or from() from running any further - sets the stopped property to true there are also process parameters provided to each filter function a safer way of stopping a specific bind is calling stop() on the process - process.stop() report() - logs to the console a snapshot of the current bind data as Bind {DATA} Report: note: normally, the console shows updated data rather than static data - for instance at log time report() logs a zim.copy(data) which will not change in the console if the data is updated toggleReport(state - default null) - turns on or off reports - see Bind report parameter or pass in true to show reports or false to hide reports applyData() - used internally to set object properties based on current bind data updatefilter(id, func) - update a bind filter at an id - set func to null to remove bind filter note: the masterFilter can be adjusted with the masterFilter property clear() - for LOCALSTORAGE, clear the localStorage[connection] removeAllBindings(removeConnectionData, call) - removes bind data removeConnectionData (default true) remove connection data this will clear localStorage for LOCALSTORAGE setting or send variable "removeAll" to connection for GET and POST call is a callback function after the data is sent and received the callback function will receive a result "success" or "error ..." in its parameter PROPERTIES type - holds the class name as a String data - the latest data held by bind - might not be all data depending on the last from() call parameters connection - the localStorage string or the url for GET or POST bindType - the type of connection LOCALSTORAGE, GET or POST master - get or set the master data being sent with to() or from() masterFilter - get or set the masterFilter function note: to update the filter for a bind, noBind() and bind() with a new function couple - get or set whether the data is coupled as sent and uncoupled as received - see couple parameter smartDecimals - if true numbers > 1 will have 1 decimal and numbers < 1 will have 2 decimals default - get or set whether this is the zimDefaultBind the zimDefaultBind is what DisplayObject bind() method will use unless bindObj is specified see also the Bind setDefault parameter stopped - setting will stop the current bind process - see stop() and filter process.stop() note: this is stopped - not stop - stop() is the method ajax - if type is POST then this is a reference to the ZIM Ajax object being used ** the following info objects are available but relate to one another ** so adjust with care - would suggest add() and remove() to adjust bindings - a bind info object in the format {id:{obj:object, props:["prop1", "prop2"]}, id2:etc.} ids - an array of all ids objIDs - a ZIM Dictionary of objects that holds an array of ids for each object toIDs - an object of to() properties in the form {prop1:[id1, id2], prop2:[id3]} fromIDs - an object of from() properties in the form {prop1:[id1, id2], prop2:[id3]} CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

Swipe(obj, distance, duration, isometric, overrideNoSwipe)

Swipe zim class - extends a createjs.EventDispatcher DESCRIPTION Sets up capturing swipes on objects. Dispatches a "swipe" event on swipe left, right, up, down. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const rect = new Rectangle(200, 200, blue).center();
const swipe = new Swipe(rect);
const distance = 100;
swipe.on("swipe", e=>{
   zog(e.swipeX); // -1, 0, 1  (for left, none and right)
   zog(e.swipeY); // -1, 0, 1  (for up, none and down)

   // move directly:
   // rect.x += distance * e.swipeX;
   // rect.y += distance * e.swipeY;
   // S.update();

   // or animate
   rect.animate({
      props:{
         x:rect.x+distance*e.swipeX,
         y:rect.y+distance*e.swipeY
      },
      time:.4,
      ease:"quadOut"
   });
});

PARAMETERS supports DUO - parameters or single object with properties below obj - the object you want to swipe on distance - (default 30) the distance in pixels to activate swipe might want to pass in a pixel distance based on percentage of stage duration - (default .08) time in seconds to travel that distance (also see ZIM TIME constant) try https://zimjs.com/swipe.html for testing distance and time (speed) isometric - (default false) set to true to rotate swiping test by 30 degrees for swiping on ZIM game Board({isometric:true}) left-right is from top left to bottom right (cols) top-bottom is from top right to bottom left (rows) overrideNoSwipe - (default false) set to true to override any ZIM noSwipe settings for example, a Slider has zimNoSwipe set on its elements so swiping the list does not swipe a page in Pages METHODS enable() - set swipe to active (by default it is) disable() - set swipe to inactive (sets active to false and does not dispatch) PROPERTIES type - holds the class name as a String distance - the distance needed for swipe to activate duration - the time from mousedown a swipe is measured for distance direction - the direction of the last swipe (left, right, up, down or none) obj - the object that was last swiped active - Boolean true for dispatching swipes and false for not EVENTS dispatches a "swipe" event on every pressup (even if swipe failed and direction is none) when a swipe event triggers the Swipe event object has a swipeX and swipeY property that is -1,0, or 1 for left, none, or right OR up, none, down the event object has an obj property as well for what object was swiped also dispatches a "swipedown" event for convenience on a mousedown LEGACY the Swipe object provides a direction property of LEFT, RIGHT, UP, or DOWN the Swipe object provides an obj property of what object was swiped on for instance if e is the event object then e.target is the Swipe object so use e.target.direction did not dispatch a custom event due to lack of support in early IE Swipe also dispatches a direction of "none" if the mouse movement is not a swipe this can be used to snap back to an original location CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

Swiper(swipeOn, target, property, sensitivity, swiperType, min, max, damp, integer, factor, loop, pauseTime, otherSwiper)

Swiper zim class - extends a createjs EventDispatcher DESCRIPTION Swiper lets you change a property of any object (with damping) by swiping. In a sense, it is like an invisible Slider. You pass in the DisplayObject to swipe on - stage, Container, Bitmap, etc. You pass in which object holds the property to animate and the property name. Then Swiper will change this property with damping based on a sensitivity you set. You can use horizontal or vertical but to do both, you need to make two Swiper objects. Originally made for controlling 3D objects like rotation and scale based on swiping a rectangle beneath the 3D object that is the same color as the stage. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const circle = new Circle(100, green).center();
// will move circle twice as fast as swipe
const swiper = new Swiper(S, circle, "x", 2);

EXAMPLE

const man = new Rectangle(50, 100, brown).center();
// will move man up an down slowly within vertical bounds of stage
const swiper = new Swiper(man, man, "y", .5, false, 0, H-man.height);

PARAMETERS supports DUO - parameters or single object with properties below swipeOn - the DisplayObject to swipe on such as the stage or a Rectangle or Bitmap, etc. target - the object that holds the property that you want to change property - the property name as a String to change when swiping Note: the Swiper will stop if the property value is less than .5 - this handles motion and rotation well but if swiping for scale or alpha, etc. this may stop too soon so set the min and max and the swiper will adjust to be one thousandth the difference between the two sensitivity - (default 1) the change in property is equal to the change in distance times the sensitivity set to 2 to change the property twice as fast as the swipe set to .5 to change the property half as fast as the swipe set to .001 to change the property very little while swiping set to -1 to go the opposite way (or -2, -.5, -.001, etc.) swiperType - (default HORIZONTAL) or set to VERTICAL or RADIAL min - (default null) if specified, the property value will not go below this number set min and max if swipe property is a small range - like for alpha or scale max - (default null) if specified, the property value will not go above this number set min and max if swipe property is a small range - like for alpha or scale damp - (default .1) the damp value with 1 being no damping and 0 being no movement integer - (default false) set to true to round the property value factor - (default 1) is going the same direction and -1 is going in opposite direction loop - (default false) set to true to loop the property within the min and max values pauseTime - (default .2) time in seconds to call swipepause event (also see ZIM TIME constant) triggers if no swipe motion and swipeOn is pressed otherSwiper - (default null) pass in a second Swiper object if the change in pixels is more on the other swiper then this swiper is not used if the change in pixels is more on this swiper then this swiper is used METHODS immediate(val) - set the damping immediately to this value to avoid damping to value dispose() - remove listeners and Ticker PROPERTIES type - holds the class name as a String target - get or set the target for the property that you are changing property - get or set the String property name that is being damped desiredValue - the current value that the swiper is damping towards sensitivity - get or set the sensitivity - see sensitivity parameter min - read only get the min max - read only get the max damp - get or set the damp of the Swiper enabled (default true) - set to false to disable the Swiper and visa versa EVENTS dispatches a "swipedown" event when swipe is started dispatches a "swipemove" event when swipe is moving dispatches a "swipeup" event when swipe is ended dispatches a "swipepause" event when finger is not swiping but still down - see pauseTime parameter dispatches a "swipestop" event when swipeup has happened and value has stopped changing (delay is due to damp) CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

MotionController(target, type, speed, axis, boundary, map, diagonal, damp, flip, orient, constant, firstPerson, turnSpeed, moveThreshold, stickThreshold, container, localBoundary, mouseMoveOutside, mousedownIncludes, minPercentSpeed, maxPercentSpeed, dampKeyup, rotate, mouseOutside)

MotionController zim class - extends a createjs EventDispatcher DESCRIPTION MotionController lets you control an object (target) in a container (like the stage) with "mousedown", "mousemove", "pressmove", "keydown", "gamebutton", "gamestick", "manual", etc. modes (types) For instance, you can control a player in a game or a butterfly in field SEE: https://zimjs.com/controller for more examples SEE: https://zimjs.com/explore/sidescroller.html for keyboard work with Scroller, Sprite, Dynamo, Accelerator SEE: https://zimjs.com/pen or https://zimjs.com/genpen (complex example) NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const circle = new Circle(40, green).center();
const controller = new MotionController(circle); // circle moves to mouse press position with damping

EXAMPLE

const rect = new Rectangle(50, 30, green).centerReg();
const controller = new MotionController({
   target:rect,
   type:"keydown",
   diagonal:true,
   damp:.1,
   rotate:true
});

EXAMPLE

new MotionController({
   target:new Pen().addTo(),
   type:"pressmove",
   damp:.5, // pen has damp too so can up this number
   speed:20
});

EXAMPLE

const background = new Pic("background.png").addTo(); // assuming loaded in Frame
const ball = new Circle().centerReg();
const scroller = new Scroller(background);
const accelerator = new Accelerator(scroller);

// control speed of Accelerator with MotionController
new MotionController({
   target:accelerator,
   type:"mousemove", // or "pressmove"
   axis:HORIZONTAL,
   // the Scroller makes two backings - backing1 and backing2
   // allow pressing on both backings and ball to control scroller
   mousedownIncludes:[scroller.backing1, scroller.backing2, ball],
   speed:30,
   minPercentSpeed:-1000,
   maxPercentSpeed:1000,
   boundary:new Boundary(0,0,W,0) // setting a boundary and speed will balance the control
});

// control position of ball with MotionController
new MotionController({
   target:ball,
   type:"mousemove",
   // allow press on Scroller backings
   mousedownIncludes:[scroller.backing1, scroller.backing2],
   speed:10
});

PARAMETERS supports DUO - parameters or single object with properties below target (default null) - the object you want to control example a circle to move across the stage can also be an Accelerator() to control percentSpeed if you only want data from the MotionController you can leave the target parameter as null (don't include it) can be a Pen() - both pen and motionController have damp parameter so probably adjust one or the other to 1 type - (default "mousedown") by default will move to where you press in the container set to "mousemove" to have the target follow the mouse movement set to "pressmove" to have target jump to mousedown position then follow while pressing - good for Pen set to "pressdrag" to have target follow mouse if pressed on and then dragged (dedicated to Shan Ruan) set to "keydown" to use keys to control the target (see map parameter) set to "gamebutton" to use gamepad buttons to control the target (see map parameter) set to "gamestick" to use gamepad stick(s) to control the target (see map parameter) set to "swipe" to use swipe to control the target set to "follow" to mousedown and hold and use F.follow() to keep moving towards mouse or press position set to "manual" to set your own with myController.convert() or myController.x and myController.y properties set to a ZIM DPad object to use the DPad to control the motion speed - (default 7 or 20 if type is pressmove) pixels it will move each tick, keypress buttonpress, swipe, etc. axis - (default BOTH or HORIZONTAL if target is Accelerator) or HORIZONTAL or VERTICAL (see diagonal parameter) boundary - (default null) a ZIM Boundary object for the boundary the registration point of the target will stay within this boundary this boundary is relative to the stage (global) if the boundary object is a Blob, the target will stay within the Blob if a boundary relative to the object's parent is desired then set the localBoundary parameter to true the boundary is automatically added to mousedownIncludes ignored when target is Accelerator - use minPercentSpeed and maxPercentSpeed instead map - (default null) an Array with left, right, up, down values (or array of values) as outlined below - (default [[65,37], [68,39], [87,38], [83,40]] when type == "keydown") these are ADWS and arrows - (default [14, 15, 12, 13] when type == "gamebutton") these are DPAD_LEFT, DPAD_RIGHT, DPAD_UP, DPAD_DOWN on a gamepad - (default [14, 15, 7, 6] when type == "gamebutton" and firstPerson == true) these are DPAD_LEFT, DPAD_RIGHT, RT, LT on a gamepad - (default [0, 0, 1, 1] when type == "gamestick") these are LSX, LSX, LSY, LSY on a gamepad - (default [[0,2], [0,2], [1], [1]] when type == "gamestick" and firstPerson == true) turn with left or right stick X, advance with left stick Y use [[0,2], [0,2], [1,3], [1,3]] for both sticks (first stick motion overrides second stick) Note: MotionController will only use the 0 and the 2 index for speed as the sticks use -1 to 1 values so you could not go only left with one stick and only right with another Note: stick values may exceed -1 and 1 on occasion (see also stickThreshold) diagonal - (default true) set to false to lock movement to horizontal or vertical only damp - (default .1 or .5 if type is pressmove) the damp value with 1 being no damping and 0 being no movement flip - (default null) set to HORIZONTAL, VERTICAL or BOTH to flip the target when in negative direction flip will not work if the target starts rotated - so make the target a container and add a rotated object to the container orient - (default false) set to true to face the direction of motion. Start direction is 0 which is to the right. for example, a default ZIM Triangle points up so use triangle.rot(90) before adding to the motionController to make it point to the right Note that a target that is rotated will not pay attention to the flip parameter - see flip for solution. constant - (default false) set to true to remove keyup or gamebutton up and always move in direction last key or button press firstPerson - (default false) set to true for keydown, gamebutton and gamecontroller to go to first person mode in firstPerson, the direction starts facing up and by default up arrow is speed forward and left and right change rotation speed will be damped by damp parameter - also, map parameter changes if in firstPerson mode - see map parameter turnSpeed - (default speed*.4) - the speed for turning in firstPerson mode - will be damped but damp parameter moveThreshold - (default 5) pixels negative or positive to treat damped motion as stopped stickThreshold - (default .2) gamepad stick axes values are from -1 to 1 but there is a lot of noise so consider within +- stickThreshold as no motion 0 container - (default zimDefaultFrame stage) the Container the target is in - the stage is most likely fine if container is specified, it must be on the stage when the MotionController is made localBoundary - (default false) which means the boundary is global - set to true for a boundary in the object parent frame mouseMoveOutside - (default true) set to false to not allow mouse movement outside the stage to affect motion mousedownIncludes - (default null) a single object or array of objects (aside from the stage) to activate with mousedown For mousedown and pressmove types, the mousedown will activate on the stage only The controller assumes everything in the container will not activate the mousedown This lets you activate interface elements without moving to them ;-) If for instance, a backing is used other than the stage, just pass in the backing to this parameter See also the mousedownIncludes property The boundary is automatically added to mousedownIncludes If the container is provided and it has a backing property, this is added automatically to the mouseDownIncludes at the start The backing can be removed from the mousedownIncludes property with mc.mousedownIncludes.splice(mc.mousedownIncludes.indexOf(mc.container.backing, 1)); minPercentSpeed - (default 0) if target is an Accelerator, the percentSpeed at the left or top of the stage (depending on axis) minPercentSpeed - (default 100) if target is an Accelerator, the percentSpeed at the right or bottom of the stage (depending on axis) dampKeyup - (default .3) damping applied to slow down Accelerator with keydown rotate - (depreciated) the same as orient - kept for backwards compatibility as of ZIM Cat 01 mouseOutside - (default false) if a container or boundary is provided, set to true to start motion if pressing outside container or boundary METHODS pause(state, time) - state defaults to true and pauses the motionController (sets speed to 0) set state to false to unpause the motionController (sets speed to speed before pausing) set the time (default 0) to the seconds to take while slowing the motionController to 0 speed (also see ZIM TIME constant) immediate(x, y) - set the damping immediately to this value to avoid damping to value - returns object for chaining convert(x, y) - for manual mode, pass in x and y and damping and rotation will be calculated dispose() - remove listeners and Ticker, Swiper and GamePad, where applicable PROPERTIES type - holds the class name as a String target - the target that you are controlling target.x and target.y will give you damped x and y x - the desired x position of the target before damping is applied (use this for manual input - or convert() method) y - the desired y position of the target before damping is applied (use this for manual input - or convert() method) dirX - the x direction the player is moving (-1,0,1) dirY - the y direction the player is moving (-1,0,1) rotation - read only rotation of the player in degrees scaleX - read only scaleX of player (to get flip data if only using controller for data) scaleY - read only scaleY of player (to get flip data if only using controller for data) dampX - reference to the horizonal Damp object dampY - reference to the vertical Damp object dampKeyup - get or set keyup damping for when using an accelerator paused - read only - true if paused and false if not - must be set with pause() method speed - the speed setting which will be multiplied by direction turnSpeed - the turn speed for firstPerson mode axis - the axis (horizontal, vertical or both); moving - get Boolean as to whether the target is moving (within moveThreshold) movingX - get Boolean as to whether the target is moving in x direction (within moveThreshold) movingY - get Boolean as to whether the target is moving in y direction (within moveThreshold) boundary - get or set the Boundary object gamepad - reference to GamePad object if applicable - allows you to use this for more events like jumping, shooting, etc. moveThreshold - the maximum value (+-) within which movement is considered stopped stickThreshold - the maximum value (+-) within which the gamepad stick axes values are considered 0 mousedownIncludes - an array of objects that the mousedown will work on - along with the stage note: if manually setting this and there is a boundary then add the boundary to the mousedownIncludes as well enabled - set to false to disable or true to enable MotionController - can toggle with enabled = !enabled ALSO adds a motionController property to target referencing the MotionController object EVENTS dispatches a "change" event for changes in direction with dir as property of event object that will hold LEFT, RIGHT, UP, DOWN, null (no direction) dispatches a "mousedown" event if type is "mousedown" or "pressmove" dispatches a "pressing" event if type is "pressmove" - note, this dispatches even if not moving dispatches a "moving" event if target is moving and "startmoving" and "stopmoving" events CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

GamePad()

GamePad zim class - extends a createjs EventDispatcher DESCRIPTION GamePad connects to Game Controllers as inputs using the HTML navigator.getGamepads API Dispatches buttondown and buttonup events for the following common buttons: "A","B","X","Y", (or for Triangle, Circle, Cross and Square) "LB","RB","LT","RT", (for left bumper, right bumper, left trigger, right trigger) "BACK","START", "LS","RS", (for left stick press, right stick press) "DPAD_UP","DPAD_DOWN","DPAD_LEFT","DPAD_RIGHT" The event object will have a button property telling which button is pressed using the string values above Dispatches a "data" event constantly to get axes data for the sticks (and constant data for the buttons) The event object in this case will have axes and buttons properties The axes property is an array of four numbers for the left and right stick's x and y properies (-1 to 1) NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const gamepad = new GamePad();
gamepad.on("buttondown", e=>{
   // only fires once per button press (unlike constant keydown event)
   zog(e.button); // LT for instance for Left trigger
   if (e.button == "LT") {
      zog("left trigger is down");
   }
   zog(e.buttonCode); // 6
   if (e.buttonCode == GamePad.LT) {
      zog("another way to do catch left trigger down");
   }
});

gamepad.on("buttonup", e=>{
   zog(e.button); // LT for instance for Left trigger
}

gamepad.on("data", e=>{
   // fires constantly in a requestAnimationFrame
   zog(e.axes[0]); // left stick x or horizontal data from -1 to 1 (lots of decimal noise)
   zog(e.axes[GamePad.LTX]); // another way of accessing left stick x
   zog(e.buttons[9]); // true or false depending on if the START button is pressed
   zog(e.buttons[GamePad.START]); another way to find if the START button is pressed
});

METHODS dispose() - removes all listeners and cancels requestAnimationFrame PROPERTIES type - holds the class name as a String connected - Boolean true if connected and false if not connected (may need to press key, etc) currentIndex - get or set the index of the controller gives multiple controller support - make two GameController objects and set different indexes data - object that holds buttons (raw data - slightly different than buttons below) and axes properties buttons - an array of Booleans as to whether the button is pressed the order of the buttons match the order of the constants below constants: A,B,X,Y,LB,RB,LT,RT,BACK,START,LS,RS,DPAD_UP,DPAD_DOWN,DPAD_LEFT,DPAD_RIGHT GamePad.A == 0 GamePad.B == 1, etc. up to GamePad.DPAD_RIGHT == 15 axes - an array of four stick values from -1 to 1 for left x and y and right x and y values (or horizontal and vertical values) constants: LSX,LSY,RSX,RSY GamePad.LSX == 0 GamePad.LSY == 1 GamePad.RSX == 2 GamePad.RSY == 3 EVENTS dispatches a "gamepadconnected" and gamepaddisconnected when connected and disconnected these have an event object with index and id properties - the index and id may not work in chrome dispatches a "buttondown" event with button and buttonCode properties dispatches a "buttonup" event with button and buttonCode properties dispatches a "data" event with axes and buttons array properties these can be handled as outlined in the description and examples CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

Portal(obj, lands)

Portal zim class - extends a CreateJS EventDispatcher Dedicated to Stephen Hawkings - may he be portal on! DESCRIPTION Turn an object into a portal that lets the user enter the portal to change lands, etc. The portal works based on mouseover (or press for mobile) The lands need to be stacked in a Container with the first land at the top. Portal will pass users throught the lands and loop at the end back to the first land. Alternatively, if loop is turned to false, Portal will backtrack the user through the lands Pass the container of lands into the lands parameter - most often you will have two lands, but more are fine too! Alternatively, the portal can be used without lands - and you can customize what you want to happen with portal events. The object will be used as a mask to show the next land. You can set the alpha of the object to any value above .01 to hide the object and show the land (do not use 0) If your object is a ZIM shape, you can use rgba(0,0,0,.01) as the color and still have an opaque borderColor SEE: https://zimjs.com/portal/ NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

F.loadAssets(["researchbuilding.jpg", "jungle.jpg"]);
F.on("complete", ()=>{
   const lands = new Container(W, H).addTo();
   const jungle = new Pic("jungle.jpg")
      .scaleTo(lands)
      .center(lands);
   const researchBuilding = new Pic("researchbuilding.jpg")
      .scaleTo(lands)
      .center(lands);
   const portalObject = new Circle(118, faint, pink, 16, true)
      .addTo(stage)
      .pos(580, 470)
      .animate({obj:{rotation:"360"}, time:70, ease:"linear", loop:true});
   const portal = new Portal(portalObject, lands);
   portal.on("enter", function() {
      // play a sound here!
   });

   // use enabled to turn on and off portal
   timeout(1, ()=>{portal.enabled = false; portalObject.pauseAnimate(true);});
   timeout(5, ()=>{portal.enabled = true; portalObject.pauseAnimate(false);});

   S.update();
}); // assets loaded

PARAMETERS supports DUO - parameters or single object with properties below obj - the Display Object that will be the portal lands - (default null) optional container of "lands" or display objects to portal through The Display Objects in the lands container (lands) should be on the stage The lands are adjusted by Portal so the currentLand is the second child and the nextLand is the first child. This is due to how the masking works. Inserting new lands or removing lands below an index of lands.numChildren-2 is okay Use addTo(lands, index) or removeFrom(lands). If you adjust either of the top two lands in the container, this will affect what is see on stage. METHODS dispose() - remove the events - the obj and lands will be left as is - manually remove these if needed PROPERTIES type - holds the class name as a String portal - a reference to the portal obj enabled - Boolean as to whether the portal is active or not currentLand - get or set the active land if lands is provided nextLand - get (read only) the next land to go to if lands is provided EVENTS dispatches an enter event on mouseover of the portal and an exit event on mouseout CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

Physics(gravity, borders, scroll, frame)

Physics zim module ** MUST import zim_physics - see https://zimjs.com/es6.html#MODULES DESCRIPTION The Physics class provides a wrapper for the Box2D physics engine. Both Box2D and the ZIM physics JavaScript files must be imported after ZIM. Once installed, physics can be turned on for ZIM DisplayObjects such as: Rectangle, Circle, Triangle, Blob, Squiggle, Bitmap, Label, Sprite, Shape, etc. NOTE The DisplayObjects used in Physics should have center registration and be on the stage or in a non-transformed Container at 0,0 on the stage. Use the DisplayObject's addPhysics() method to add the object to a physics world. This will also add more methods and properties to the DisplayObject. The physics world can be set up ahead of time with new Physics() or if a world is not already created the addPhysics() method will make a default world. The default world will have a boundary of the frame and gravity of 10 (normal gravity). SHAPES By default the physics body shape will be a rectangle that matches the bounding box of the DisplayObject. However, a Circle will be have a physics circle and a Triangle will have a physics triangle. "circle", "rectangle" or "triangle" can be passed in to the addPhysics() method to override the actual shape. The expand parameter can be used to make the physics object bigger or smaller than the bounds. Blob and Squiggle objects receive a polygon at each point and as of ZIM 017 can now be concave (a previous limitation) The polygon cannot cross itself and points must be in clockwise order Also see the ZIM outlineImage() and simplifyPoints() functions https://zimjs.com/017/outline.html PHYSICS Objects have impulse(), force(), spin() and torque() methods to push them around and spin them. impulse() is a one time push like shooting a pool ball force() is a force over time like gravity or wind and is applied in a Ticker, keydown, etc. spin() is a one time spin of the object around its center torque() will rotate the object over time and is applied in a Ticker, keydown, etc. The physics class has a join() method that can join objects in a variety of physics joints. The physics class has a drag() method to specify which objects are draggable. There is a debug() method to see the physics world behind ZIM. The world can be set up to be bigger than the frame and follow() an object. Objects are given a control() method to use keyboard keys to move the object. Contact can be tested for with contact() and contactEnd() each which receive a callback function that is provided with the other contacting body BOX2D https://box2d.org/documentation or https://www.box2dflash.org/docs/2.0.2/manual Box2D has many other features that can be accessed as well. Note that the ZIM Physics makes much of this easier so start with ZIM and use the Box2D docs and manuals for custom requirements. The Physics class has a world poperty that refers to the Box2D world. Each ZIM DisplayObject with physics() turned on has a body property that refers to the Box2D body and a physics property that refers to its Physics object. See the properties listed below for more information. SEE: https://zimjs.com/physics/ for examples NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// add a rectangle to a default Physics world,
// set it draggable and turn debug mode on
const rect = new Rectangle().centerReg().addPhysics(); // center registration for rectangular objects
rect.physics.drag();
rect.physics.debug();
// note: we would usually make a Physics() object first (see below)

EXAMPLE

// create a world with no gravity (viewed from top like air-hockey)
const physics = new Physics(0);
const circle = new Circle(50,blue,grey).center().addPhysics({restitution:1.1}); // how bouncy
// make sure to reg(CENTER) or centerReg() any rectangular objects
const rect = new Rectangle(30,400).reg(CENTER).pos(70,0,LEFT,CENTER).addPhysics(false); // static - do not move
const tri = new Triangle(150,150,150,green,grey).pos(200,0,LEFT,CENTER).addPhysics({linear:10}); // does not slide easily
physics.drag(); // note: to add a boundary use the borders parameter of Physics()
// test to see if circle hits rectangle
// contact callback function receives ZIM object (and physics body as next param)
// a ZIM border will have a type = "Border" and a side = LEFT, RIGHT, TOP, "bottom"
// but it is not really a ZIM Rectangle but just an object literal placeholder
circle.contact(obj=>{
   if (obj == rect) {
      rect.color = red;
      timeout(.3, ()=>{
         rect.color = black;
         // circle.noContact(); // could only check once...
      })
   }
});

EXAMPLE

// control a ball with a DPad - better than keys for mobile
const physics = new Physics(0);
const ball = new Circle().center().addPhysics();
const dPad = new DPad().pos(40,40,LEFT,BOTTOM);
ball.control(dPad, 80);

EXAMPLE

// attach a physics object to a ZIM object
// this is like a mousejoint similar to drag() but attached to an object rather than the mouse
// so a physics object can follow a ZIM drag() or animate() or wiggle(), etc.
// the original distance between the objects is maintained like a distance joint
// see https://zimjs.com/valentines/puppets.html
// see https://zimjs.com/valentines/puppets2.html
const physics = new Physics(0);
const control = new Triangle().center().mov(0,-100).drag(); // or animate() or wiggle()
const ball = new Circle().center().addPhysics();
physics.attach(control, ball); // physics ball will be moved by triangle

EXAMPLE

import zim from "https://zimjs.org/cdn/017/zim_physics"; // or latest version
new Frame(FIT, 1024, 768, light, dark, ready, "cathead.png", "https://zimjs.org/assets/");
function ready() {
const pic = new Pic("cathead.png").center();
const physics = new Physics().drag();

const blob = new Blob({
points:simplifyPoints(outlineImage(pic), 10), // 10 is the default tolerance
color:faint,
interactive:false
}).loc(pic).addPhysics();
pic.addTo(blob);

zog(physics.validate(blob)); // check validation

new Circle(50,black).pos(0,100,CENTER).addPhysics();
}

PARAMETERS - FOR PHYSICS ** supports DUO - parameters or single object with properties below gravity - (default 10) the gravity force in the downward direction borders - (default the frame bounds) a ZIM Boundary() object or object literal with x, y, width and height properties this makes physics body rectangles around the physics world pass in "none" for no borders you can remove border bodies afterwards with physics.remove(physics.borderTop) and then borderLeft, borderRight and borderBottom scroll - (default false) set to true to be able to scroll the stage x an y This will let you follow a physics object - see follow() method frame - (default zdf) the zim.Frame object METHODS - FOR PHYSICS - see also OBJECT METHODS and BODY METHODS below borders(boundary) - (default frame bounds) a ZIM Boundary() object or an object literal {} with x, y, width and height pass in "none" for no borders - also see borders parameter will remove old borders bodies before making new drag(array) - drag all physics objects (with dynamic set to true) array - (default null) pass in an object or an array of objects to drag Note: physics dragging is applied on the Physics class to not overwrite traditional ZIM drag() on DisplayObjects noDrag(array) - stop dragging all physics objects or pass in an array array - (default null) pass in an object or an array of objects to stop dragging pause(type) - pauses physics if type is true (default), resumes physics if type is false join(obj1, obj2, point1, point2, minAngle, maxAngle, type) - creates and returns a physics joint ** supports DUO - parameters or single object with properties below obj1 - the first ZIM DisplayObject (with physics turned on) to join together obj2 - the second ZIM DisplayObject (with physics turned on) to join together point1 - (default center of object) the anchor point of the joint on the first object point2 - (default center of object) this is only needed on a distance joint minAngle - (default null) the minimum angle the joint can make from its starting angle maxAngle - (default null) the maximum angle the joint can make from its starting angle type - (default "weld") the type of joint set to "distance" to keep the same distance between two object anchors set to "revolute" to rotate objects around a fixed point relative to the first object set to "weld" to fix the objects together break(joint) - break a joint created with join() to use, store the result of the join() method in a variable and pass that variable in to break() attach(control, obj) attach a physics object (obj) to a ZIM object (control) to like a mousejoint to the ZIM object not the mouse the control can then be animated, wiggled, dragged and the physics object will follow it returns an id to be able to unattach const id = physics.attach(triangle, circle); timeout(2, ()=>{physics.unattach(id)}); unattach(id) unattach a physics object from the ZIM object based on the stored id from attach(); buoyancy(height, denisity, linear, angular) returns a Box2D buoyancy controller. Then need to add() or remove() objects height - (default H/2) is pixels from bottom of the stage density - (default 3) density of fluid - the higher the more an object floats linear - (default 4) linear damping to reduce movement angular - (default 4) angular damping to reduce rotation the buoyancy controller will have the following methods: add(obj) - add object with physics or an array of objects with physics to buoyancy controller returns buoyancy object for chaining remove(obj) - remove object or an array of objects from buoyancy controller returns buoyancy object for chaining clear() - remove all objects from buoyancy controller returns buoyancy object for chaining dispose() - deletes buoyancy controller debug() - activates the debugging - returns object for chaining updateDebug() - updates the debug canvas if the frame has been scaled (put in frame resize event) removeDebug() - removes the debug canvas - you can add it again later (or toggle, etc.) // FOR BODIES ONLY (legacy - but may not need a visual ZIM object) makeRectangle(width, height, ... all addPhysics() params) - makes a Box2D body in the shape of a rectangle - see parameters makeCircle(radius, ... all addPhysics() params) - makes a Box2D body in the shape of a circle - see parameters makeTriangle(a, b, c, ... all addPhysics() params) - makes a Box2D body in the shape of a triangle all three add x, y and rotation properties to body (use at start) all three support ZIM DUO single parameter as an object using param names as keys remove(body) - removes a physics body - use on border bodies, for instance this is for physics bodies only - use obj.removePhysics() to remove physics from ZIM DisplayObjects addMap(body, asset) - sets x, y, rotation of ZIM asset to Box2D body this can be automatically done by using the physics() method on the ZIM DisplayObject removeMap(body) - removes mapping (then probably will want to remove body and removeChild) see the removePhysics() method of a ZIM DisplayObject separate(body, fixtureDef, verticesAry, scale) - uses an additional b2Separate() class by Antoan Angelov used internally by Blob and includes validate() method below: validate(obj) - tests to see if Blob or an array of {x,y} points is a valid polygon returns the following: 0 if the vertices can be properly processed 1 If there are overlapping lines 2 if the points are not in clockwise order 3 if there are overlapping lines and the points are not in clockwise order dispose() - stops the update, removes debug if there - you still need to remove ZIM assets a delay of 50 ms might be needed before disposing children to let the physics dispose *** also see zim.Ticker below for methods to add and remove functions from update function PROPERTIES - FOR PHYSICS - see also OBJECT PROPERTIES and BODY PROPERTIES below world - the Box2D world that is made frame - the Frame the physics is operating on see: https://zimjs.com/expand/physics.html for example note: will have to call drag() again if changing frames note: may have to redo borders if frame has different dimensions scale (read only) scale used in world (constant 30) step (read only) step used in world (constant 20) timeStep - 1/step - set to 0 to pause physics but also see paused() method could animate this property to slow down or speed up physics gravity - get or set gravity used in world paused (read only) whether physics has been paused with pause() method scroll - get or set the scroll of the physics world see the Physics scroll parameter and the follow() method of objects Ticker - gives access to update function to add your own functions: physics.Ticker.add(function, after) after defaults to true for after world step and force clear set after to false to run function before world step physics.Ticker.remove(function) controlObj - the ZIM DisplayObject being controlled by the obj.control() method followObj - the ZIM DisplayObject being followed by the obj.follow() method borderTop - the top border physics body of the world if it exists borderBottom - the bottom border physics body of the world if it exists borderLeft - the left border physics body of the world if it exists borderRight - the right border physics body of the world if it exists METHODS - FOR OBJECTS - also see BODY METHODS below ** the ZIM DisplayObject comes with an addPhyics() method ** for reference, here are the docs for the addPhysics() method ** all the methods below addPhysics are the methods added to the DisplayObject addPhysics(dynamic, contract, shape, friction, linear, angular, density, bounciness, maskBits, categoryBits, physics, restitution, sensor) ** supports DUO - parameters or single object with properties below dynamic - (default true) - set to false to not move the physics body (static) contract - (default 0) - make the physics body smaller (or bigger with negative) than bounds shape - (default object shape) - "rectangle" for any object other than Circle, Dial and Triangle but can specify a "circle" for a Sprite or Bitmap, for instance - to try and match shape custom polygon bodies can also be made with manual Box2D and then use physics.addMap() but the only shapes available automatically are "rectangle", "circle", "triangle" friction - (default .8) - how sticky will the body act - set to 0 to slide. linear - (default .5) - linear damping which slows the movement - set to 0 for no damping angular - (default .5) - angular damping which slows the rotation - set to 0 for no damping density - (default 1) - the density that can affect what happens with collisions bounciness - (default 0) - how bouncy the object is - 0 is not bouncy 4 is crazy bouncy maskBits - (default null) - used with categoryBits to determine which bodies will collide with which other bodies as soon as maskBits is specified, the body will collide only with the categoryBits provided to the maskBits parameter 1 will collide with bodies that do not have categoryBits specified including the borders to test collision with bodies that have categoryBits specified, use the pipe (|) as follows: 1|2 will also collide with bodies having categoryBits of 2 specified so if another body has categoryBits of 4 then the bodies would not collide. 1|2|4 would also collide with 4 but not bodies with categoryBits of 8, etc. 2|4 would pass through any bodies without categoryBits of 2 or 4 including the borders categoryBits - (default 1) - a collision category - by default, bodies are in category 1 use with maskBits to say which bodies will collide with which other bodies the values are bit fields https://en.wikipedia.org/wiki/Bit_field so can have the following values: can be 2, 4, 8, 16, 32, 64, 128, 256, etc. up to 15 powers of 2 physics - (default zimDefaultPhysics) restitution - (default bounciness) - replaced by bounciness - kept for backwards compatibility sensor - (default false) - set to true to make object not interact but still trigger contact() and contactEnd() this is like the Box2D hitTest for non interaction removePhysics() - lets you remove the DisplayObject from the physics world to add back to the physics world, use the addPhysics() method impulse(x, y, targetX, targetY) - add a one-time force on the object like a hitting a pool ball x - (default 0) the force in the x direction y - (default 0) the force in the y direction targetX - (default center of object) the x location on the object where the force acts targetY - (default center of object) the y location on the object where the force acts force(x, y, targetX, targetY) - add a force over time on the object like a gravity or wind this is applied in a new Ticker or on keydown, etc. many times just applying the force once will not do anything - use an impulse() for that x - (default 0) the force in the x direction y - (default 0) the force in the y direction targetX - (default center of object) the x location on the object where the force acts targetY - (default center of object) the y location on the object where the force acts spin(amount) - add a one time turning force to an object torque(amount) - add a turning force over time on the object this is applied in a new Ticker or on keydown, etc. many times just applying the torque once will hardly do anything - use an spin() for that setLinearVelocity(x, y) - set the linear velocity - this overrides current forces so might look unnatural as setLinearVelocity(0,0) will stop the object moving setAngularVelocity(amount) - set the angular velocity - this overrids current forces so might look unnatural as setAngularVelocity(0) will stop the object spinning sleep() - puts object to sleep so no physics calculations are done wake() - wakes up object from sleep so physics calculations are done follow(damp, dampY, leftOffset, rightOffset, upOffset, downOffset, offsetDamp, offsetDampY, horizontal, vertical, borderLock, borderOriginal) moves stage to to follow ZIM object set the scroll parameter of Physics to true pass in null for obj to stop following - then can position stage with x and y ** supports DUO - parameters or single object with properties below damp - (default .05) the damping of the motion of the stage - 1 moves faster, 0 not at all dampY - (default damp) can set to damp vertical movement at a separate rate leftOffset - (default 0) rightOffset - (F.width) the object will try and move to leftOffset when moving right and rightOffset when moving left this counters the damping so that the user can see in the direction of motion when the object is not being controled it moves to the average between left and right offsets upOffSet - (default 0) downOffSet - (default F.height) same as offsets above but in the y direction offsetDamp - (default .02) the damping for moving the object to the offset offsetDampY - (default offsetDamp) - damping for moving the object to the y offset if desired to be different than x horizontal - (default true) set to false to not follow horizontally vertical - (default true) set to false to not follow vertically borderLock - (default true) locks follow to borders if borders are not "none" borderOriginal - (default false) set to true to lock follow to original borders even if removed control(type, speed, speedY, horizontal, vertical) - control object with arrows see noControl() to turn off object control ** supports DUO - parameters or single object with properties below type - (default "both") or set "wasd" or "arrows" or a ZIM DPad object speed - (default 200) the speed of the object motion (also speed property on object) speedY - (default speed) or set to specify a different y speed than the x speed (also speedY property on object) horizontal - (default true) set to false to not control horizontal motion vertical - (default true) set to false to not control vertical motion customControl(dir, speed, speedY) - available only if control() is set. pass in LEFT, RIGHT, UP, DOWN and optional speed (otherwise uses control() speed) for operating object with buttons or accelerometer for instance these will then take the place of keys or DPad noControl() - remove control for an object set with control() contact(call) - run the call function when object's body contacts another body the callback function receives two parameters - the ZIM object and the Physics body that the object has hit a border will have a type = "Border" and a side = LEFT, RIGHT, TOP, "bottom" but it is not really a ZIM Rectangle but just an object literal placeholder Also see sensor parameter to trigger contact but with no physics interaction contactEnd(call) - run the call function when object's body ends contacts with another body the callback function receives two parameters - the ZIM object and the Physics body that the object has hit a border will have a type = "Border" and a side = LEFT, RIGHT, TOP, "bottom" but it is not really a ZIM Rectangle but just an object literal placeholder Also see sensor parameter to trigger contact but with no physics interaction noContact() - remove contact call noContactEnd() - remove contactEnd call PROPERTIES - FOR OBJECTS - see also BODY PROPERTIES below dynamic - set to true for dynamic and false for static there is also kinematic that can be set using the obj.body.SetType(1) speed - get or set the speed of an object that is controlled by control() speedY - get or set the speedY of an object that is controlled by control() ** normal x, y, rotation or pos(), loc(), rot() will not work with physics! ** see the BODY loc(x,y) METHOD and the rotation PROPERTY below ** these should really not be set at all in the physics world ** but rather let the forces, etc. work them out ** it is best to set traditional properties before calling physics() METHODS - FOR BODY (a physics engine body) loc(x,y) - generally, we should not manually adjust x and y but rather use forces - returns body for chaining but for resetting things, etc. use zimObj.body.loc(x, y) Do not use zimObj.loc() or zimObj.x or zimObj.y - these will only work BEFORE adding physics rot(angle) - set the rotation property of the body of the phsyics object - returns body for chaining Do not use zimObj.rot() or zimObj.rotation - these will only work BEFORE adding physics ** for scale, another object will need to be made ** the ZIM DisplayObject body property provides access to the following Box2D methods (note, all start with uppercase): ** commonly used methods are handled through ZIM wrapper methods on the DisplayObject ** see https://www.box2dflash.org/docs/2.1a/reference/ for very basic docs Advance() ApplyForce() ApplyImpulse() ApplyTorque() CreateFixture() CreateFixture2() DestroyFixture() GetAngle() GetAngularDamping() GetAngularVelocity() GetContactList() GetControllerList() GetDefinition() GetFixtureList() GetInertia() GetJointList() GetLinearDamping() GetLinearVelocity() GetLinearVelocityFromLocalPoint() GetLinearVelocityFromWorldPoint() GetLocalCenter() GetLocalPoint( GetLocalVector() GetMass() GetMassData() GetNext() GetPosition() GetTransform() GetType() GetUserData() GetWorld() GetWorldCenter() GetWorldPoint() GetWorldVector() IsActive() IsAwake() IsBullet() IsFixedRotation() IsSleepingAllowed() Merge() ResetMassData() SetActive() SetAngle() SetAngularDamping() SetAngularVelocity() SetAwake() SetBullet() SetFixedRotation() SetLinearDamping() SetLinearVelocity() SetMassData() SetPosition() SetPositionAndAngle() SetSleepingAllowed() SetTransform() SetType() SetUserData() ShouldCollide() Split() SynchronizeFixtures() SynchronizeTransform() b2Body() connectEdges() PROPERTIES - FOR BODY (a physics engine body) zimObj - the ZIM Object that the body is mapped to ** traditional properties should be set before calling phyics() ** but the following properties are provided x - deprecated - please use the BODY's loc(x, y) method - note: zimObj.body.loc() is not the same as the zimObj.loc() method y - deprecated - please use the BODY's loc(x, y) method - note: zimObj.body.loc() is not the same as the zimObj.loc() method rotation - the rotation of the body (degrees) - setting this will also rotate the ZIM DisplayObject Also see obj.body.SetFixedRotation() to stop the physics body from rotating https://zimjs.com/zapp/print/Z_C6SBW And the counter rotation technique here: https://zimjs.com/data/ GLOBAL VARIABLES ** Making a new Physics() or using physics() on a ZIM DisplayObject ** gives global shortcut access to the following Box2D classes: ** these all have methods and properties https://www.box2dflash.org/docs/2.1a/reference/ b2Vec2 = Box2D.Common.Math.b2Vec2; b2BodyDef = Box2D.Dynamics.b2BodyDef; b2Body = Box2D.Dynamics.b2Body; b2FixtureDef = Box2D.Dynamics.b2FixtureDef; b2Fixture = Box2D.Dynamics.b2Fixture; b2World = Box2D.Dynamics.b2World; b2PolygonShape = Box2D.Collision.Shapes.b2PolygonShape; b2CircleShape = Box2D.Collision.Shapes.b2CircleShape; b2MouseJointDef = Box2D.Dynamics.Joints.b2MouseJointDef; b2DistanceJointDef = Box2D.Dynamics.Joints.b2DistanceJointDef; b2RevoluteJointDef = Box2D.Dynamics.Joints.b2RevoluteJointDef; b2WeldJointDef = Box2D.Dynamics.Joints.b2WeldJointDef; b2AABB = Box2D.Collision.b2AABB; b2DebugDraw = Box2D.Dynamics.b2DebugDraw; b2BuoyancyController = Box2D.Dynamics.Controllers.b2BuoyancyController; b2ContactListener = Box2D.Dynamics.b2ContactListener; CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

TimeLine(objects, width, startPaused, barColor, buttonColor, themeColor, corner, ticks, damp, loop, noLoop, call, style, group, inherit)

TimeLine zim class extends zim Container which extends a createjs Container DESCRIPTION Automatically adds a ZIM Silder that scrubs through animations added to the Timeline. There is a play and pause and a menu with speed, labels, loop, trails and color settings. This will most-likely be used for learning - for testing animations, etc. The pop-up menu button can be removed with timeline.menu.removeFrom(); The menu can be cleared with timeline.pane.contentContainer.removeAllChildren(); Or the menu can customized with timeline.pane.add(someObject); SEE: https://zimjs.com/015/timeline.html NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const icon = F.makeIcon({box:clear })
   .reg(CENTER)
   .loc(150,450)
   .alp(0)
   .sca(0)
   .animate({
      props:[
         {props:{scale:2, alpha:1, x:300}},
         {props:{x:850}, time:2},
         {props:{rotation:360, scale:1, alpha:0}}
      ]
   });

new Rectangle().reg(CENTER).pos(70,100,LEFT,BOTTOM).animate({
   props:{rotation:90},
   rewind:true,
   loop:true
});

const path = new Squiggle({showControls:false}).transformPoints("scale", 2).pos(0,100,CENTER);
new Circle(50,red).addTo().rot(90).animate({path:path},4)

new Timeline(); // note, the Timeline will be automatically added at the bottom

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) objects - (default all objects on stage with animations) an object or array of objects with animations width - (default stage width / 2) the width of the Timeline startPaused - (default false) set to true to start paused barColor - (default tin) the color of the slider bar buttonColor - (default light) the icon color of the buttons themeColor - (default purple) the backgroundColor of the buttons and the menu pane corner - (default 5) set the corner of the Timeline - can use and array too ticks - (default false) set to true to add ticks and labels to the slider damp - (default false) set to true or a number between 0 and 1 like .2 with lower numbers being more damping loop - (default true) set to false to not loop the animations noLoop - (default false) set to true to prevent individual objects from looping as Timeline is played call - (default false) callback function to call when done or looping style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS setThemeColor(color) - set the theme color - does not have to be the colors in the menu dispose() - get rid of all events and objects - the animations will still work. ALSO See the CreateJS Easel Docs for Filter methods, such as: getBounds() PROPERTIES type - holds the class name as a String backing - access to the backing rectangle shade - access to the left backing shade2 - access to the right backing slider - access to the slider controls - access to the left button menu - access to the right button pane - access to the menu pane title - access to the title in the menu icon - access to the ZIM icon in the menu list - access to the list in the menu themeColor - get the current theme color CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

BlurEffect(blurX, blurY, quality, style, group, inherit)

BlurEffect zim class extends createjs BlurFilter DESCRIPTION Blurs a DisplayObject in the x and/or y direction with a quality Can be passed in to effect() method to apply effect. Properties can be changed and updated and then updateEffects() called. Properties can be animated and wiggled. Use noEffect("blur") to remove blur effect. SEE: https://zimjs.com/cat/effects.html NOTE Effects are quite processor intensive so use sparingly. Each effect processes every pixel - when animating this results in hundreds of thousands of loops. ZIM has wrapped the CreateJS filters, filter property, caching and cacheUpdate system to make accessing filters easy - but apps will slow down if they are over-used. Keep the quality at 1 for animating filters at a decent framerate. Consider pre-processing images if effects do not have to be dynamic. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// add a blur effect then remove it after 2 seconds
const rect = new Rectangle()
   .center()
   .effect(new BlurEffect(20, 20));
timeout(2, ()=>{
   rect.noEffect();
   // // or if other effects to keep use:
   // rect.noEffect("blur");
   // // or to update effect use:
   // rect.effects.blur.blurY = 200;
   // rect.updateEffects();
   // // can also store effect in variable and access properties on the variable
   // // rather than on the effects property of the object
   S.update();
});

EXAMPLE

// add a 200 blurX effect and animate it to 0 rewind and looping
STYLE = {blurX:200} // just showing using style...
new Pic("image.png") // preloaded asset
   .center()
   .effect(new BlurEffect())
   .animate({
      props:{"effects.blur.blurX":0},
      time:.7,
      rewind:true,
      rewindWait:.5,
      loop:true
   });

CLOSE ▲

GlowEffect(color, alpha, blurX, blurY, strength, quality, inner, knockout, hideObject, style, group, inherit)

GlowEffect zim class extends createjs BlurFilter Originally from https://github.com/u-kudox/Filters_for_EaselJS and https://github.com/sky0014/Filters_for_EaselJS - with thanks DESCRIPTION Adds a glow around or inside a DisplayObject. Can be passed in to effect() method to apply effect. Properties can be changed and updated and then updateEffects() called. Properties can be animated and wiggled. Use noEffect("glow") to remove glow effect. SEE: https://zimjs.com/cat/effects.html NOTE Effects are quite processor intensive so use sparingly. Each effect processes every pixel - when animating this results in hundreds of thousands of loops. ZIM has wrapped the CreateJS filters, filter property, caching and cacheUpdate system to make accessing filters easy - but apps will slow down if they are over-used. Keep the quality at 1 for animating filters at a decent framerate. Consider pre-processing images if effects do not have to be dynamic. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// add a glow effect with knockout then remove it after 2 seconds
const rect = new Rectangle()
   .center()
   .effect(new GlowEffect({color:pink, blurX:50, blurY:50, knockout:true}));
timeout(2, ()=>{
   rect.noEffect();
   // // or if other effects to keep use:
   // rect.noEffect("glow");
   // // or to update effect use:
   // rect.effects.glow.blurY = 200;
   // rect.updateEffects();
   // // can also store effect in variable and access properties on the variable
   // // rather than on the effects property of the object
   S.update();
});

EXAMPLE

// add a 200 blurX effect then animate it to 0 rewind and looping
STYLE = {blurX:200} // just showing using style...
new Pic("image.png") // preloaded asset
   .center()
   .effect(new GlowEffect())
   .animate({
      props:{"effects.glow.blurX":0},
      time:.7,
      rewind:true,
      rewindWait:.5,
      loop:true
   });

CLOSE ▲

ShadowEffect(distance, angle, color, alpha, blurX, blurY, strength, quality, inner, knockout, hideObject, style, group, inherit)

ShadowEffect zim class extends createjs BlurFilter Originally from https://github.com/u-kudox/Filters_for_EaselJS and https://github.com/sky0014/Filters_for_EaselJS - with thanks DESCRIPTION Makes a drop shadow on a DisplayObject - more customizable than ZIM sha() Can be passed in to effect() method to apply effect. Properties can be changed and updated and then updateEffects() called. Properties can be animated and wiggled. Use noEffect("shadow") to remove shadow effect. SEE: https://zimjs.com/cat/effects.html NOTE ZIM sha() wraps a CreateJS Shadow() which seems to put shadow on borders too The ShadowEffect() does not put shadows on borders - which is good. NOTE Effects are quite processor intensive so use sparingly. Each effect processes every pixel - when animating this results in hundreds of thousands of loops. ZIM has wrapped the CreateJS filters, filter property, caching and cacheUpdate system to make accessing filters easy - but apps will slow down if they are over-used. Keep the quality at 1 for animating filters at a decent framerate. Consider pre-processing images if effects do not have to be dynamic. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// add a shadow effect when dragging and remove on pressup
const rect = new Rectangle()
   .center()
   .drag();
rect.on("mousedown", ()=>{
   rect.effect(new ShadowEffect());
   S.update();
});
rect.on("pressup", function () {
   rect.noEffect("shadow");
   S.update();
});

EXAMPLE

// add a 200 blurX effect then animate the angle rewind and looping
STYLE = {blurX:200} // just showing using style...
new Pic("image.png") // preloaded asset
   .center()
   .effect(new ShadowEffect())
   .animate({
      props:{"effects.shadow.angle":90},
      time:.7,
      rewind:true,
      rewindWait:.5,
      loop:true
   });

CLOSE ▲

ThresholdEffect(redValue, greenValue, blueValue, passColor, failColor, style, group, inherit)

ThresholdEffect zim class extends createjs Filter DESCRIPTION Applies a color for above a value and below a value for each color channel. Channels or pass and fail can be turned off with -1 SEE: https://zimjs.com/016/threshold.html NOTE Effects are quite processor intensive so use sparingly. Each effect processes every pixel - when animating this results in hundreds of thousands of loops. ZIM has wrapped the CreateJS filters, filter property, caching and cacheUpdate system to make accessing filters easy - but apps will slow down if they are over-used. Keep the quality at 1 for animating filters at a decent framerate. Consider pre-processing images if effects do not have to be dynamic. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// html red for colors above half intensity (128/256) and html blue for colors below half intenstity
new Pic("file.jpg").center().effect(new FilterEffect(128, 128, 128, "red", "blue"));

EXAMPLE

// lots of black but save real colors if above 180 in all channels - but will probably want to play with settings.
new Pic("file.jpg").center().effect(new FilterEffect(180, 180, 180, -1, "black"));

CLOSE ▲

ColorEffect(redMultiplier, greenMultiplier, blueMultiplier, alphaMultiplier, redOffset, greenOffset, blueOffset, alphaOffset, style, group, inherit)

ColorEffect zim class extends createjs ColorFilter DESCRIPTION Changes the colors in a DisplayObject including Shapes and Bitmaps. BACKGROUND Bitmaps are made up of four channels - red, green, blue and alpha (transparency). Each channel has 256 values from 0 to 255. O is dark and 255 is light. If we multiply the blue channel by 0 we would get no blue colors. If we multiply the blue channel by .5 we would get half as bright blue colors and multiplying by 1 would leave the blue colors as they are. Offsetting the colors negative makes them darker and positive makes them lighter. SEE: hue, saturation, brightness and contrast DisplayObject properties as well SEE: the keyOut() method of Bitmap(), Pic() and SVG() that has a replacement color parameter SEE: color property of Shapes or backgroundColor property of Components to change colors directly including animating color from one color to another with animate() Can be passed in to effect() method to apply effect. Properties can be changed and updated and then updateEffects() called. Properties can be animated and wiggled. Use noEffect("color") to remove color effect. SEE: https://zimjs.com/cat/effects.html NOTE Effects are quite processor intensive so use sparingly. Each effect processes every pixel - when animating this results in hundreds of thousands of loops. ZIM has wrapped the CreateJS filters, filter property, caching and cacheUpdate system to make accessing filters easy - but apps will slow down if they are over-used. Keep the quality at 1 for animating filters at a decent framerate. Consider pre-processing images if effects do not have to be dynamic. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// animate an image so it has no red and green (leave it the blue) rewind and loop
new Pic("image.png") // preloaded asset
   .center()
   .effect(new ColorEffect())
   .animate({
      props:{"effects.color.redMultiplier":0, "effects.color.redMultiplier":0},
      time:.7,
      rewind:true,
      rewindWait:.5,
      loop:true
   });

CLOSE ▲

MultiEffect(hue, saturation, brightness, contrast, style, group, inherit)

MultiEffect zim class extends createjs ColorMatrixFilter DESCRIPTION Sets the hue, saturation, brightness and contrast of a DisplayObject. CONVENIENCE EFFECTS ZIM provides hue, saturation, brightness and contrast properties for DisplayObjects: obj.hue = 100; These are easier to use than the MultiEffect class directly. Can be passed in to effect() method to apply effect. Properties can be changed and updated and then updateEffects() called. Properties can be animated and wiggled. Use noEffect("hue") to remove hue effect. SEE: https://zimjs.com/cat/effects.html NOTE Effects are quite processor intensive so use sparingly. Each effect processes every pixel - when animating this results in hundreds of thousands of loops. ZIM has wrapped the CreateJS filters, filter property, caching and cacheUpdate system to make accessing filters easy - but apps will slow down if they are over-used. Keep the quality at 1 for animating filters at a decent framerate. Consider pre-processing images if effects do not have to be dynamic. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// change hue, saturation, brightness and contrast of image then change back
new Pic("image.png") // preloaded asset
   .center()
   .effect(new MultiEffect(20, -50, -20, 10));
timeout(2, ()=>{
   rect.noEffect();
   // // or if other effects to keep use:
   // rect.noEffect("multi");
   // // or to update effect use:
   // rect.effects.multi.amount = 200;
   // rect.updateEffects();
   // // can also store effect in variable and access properties on the variable
   // // rather than on the effects property of the object
   S.update();
});

CLOSE ▲

AlphaEffect(mask, style, group, inherit)

AlphaEffect zim class extends createjs AlphaMaskFilter DESCRIPTION Applies an alpha mask to a DisplayObject BACKGROUND Images have an alpha channel with values from 0-255 with 0 being completely see through and 255 completely opaque. A regular mask shows the masked object through the mask where the mask has any alpha greater than 0. And a regular mask in ZIM needs to be a Shape. When the AlphaEffect() is applied to a target object it sets the alpha of the target object to the alpha of the mask passed in to the effect. It replaces the alpha channel of the object with the alpha channel of the mask. The mask can be a PNG with varying levels of alpha or a shape with a gradient alpha using an rgba() color. This means we can fade the edges of the image! Can be passed in to effect() method to apply effect. Properties can be changed and updated and then updateEffects() called. Properties can be animated and wiggled. Use noEffect("alpha") to remove alpha effect. NOTE This works best if the object and the mask are in the same location and have the same bounds. Beware, circles have negative x and y bound positions. So if masking a circle, put the circle in a dimensioned Container(radius*2, radius*2) then add the effect(new AlphaEffect()) to the container. SEE: https://zimjs.com/explore/alphaeffect.html https://zimjs.com/explore/alphaMask.html https://zimjs.com/explore/mask.html https://zimjs.com/cat/effects.html NOTE Effects are quite processor intensive so use sparingly. Each effect processes every pixel - when animating this results in hundreds of thousands of loops. ZIM has wrapped the CreateJS filters, filter property, caching and cacheUpdate system to make accessing filters easy - but apps will slow down if they are over-used. Keep the quality at 1 for animating filters at a decent framerate. Consider pre-processing images if effects do not have to be dynamic. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// add alpha mask effect with a transparent background png
// ** preload the pic.png in the Frame call or with F.loadAssets()
const tile = new Tile(new Circle(10, purple), 20, 20)
   .center()
   .effect(new AlphaEffect(new Pic("pic.png")))
   .drag({all:true});

EXAMPLE

// add alpha mask as a gradient crop for an image
// ** preload the pic.png in the Frame call or with F.loadAssets()
const pic = new Pic("pic.png").center();
const gradient = new RadialColor(
   [clear,black],[.3,.5], // colors and ratios
   pic.width/2,pic.height/2,Math.max(pic.width/2,pic.height/2), // start x, y and radius (or use Math.min())
   pic.width/2,pic.height/2,0 // end x, y and radius
);
pic.effect(new AlphaEffect(new Rectangle(pic.width, pic.height, gradient)));

EXAMPLE

// mask a Circle with a Container containing animated Rectangles
// add Circle to dimensioned Container otherwise negative x and y bounds of Circle breaks cacheCanvas

const mask = new Container(300,200).center();
// animating first rectangle in negative so start it moved in the container
// so it will not animate less than 0 in the container
new Rectangle().loc(50,0,mask).animate({props:{x:"-50"}, rewind:true, loop:true});
new Rectangle().loc(150,100,mask).animate({props:{x:"50"}, rewind:true, loop:true});

// make the container the same size as above
// with the same registration point - just makes things easier
const c = new Container(300,200).center();
new Circle(100,red).center(c);
c.effect(new AlphaEffect(mask, true))
Ticker.add(()=>{c.updateEffects();});

CLOSE ▲

Pixel(obj, amount, amountY, blur, dynamic, blendmode, boundary, expand, amountFactor, blurFactor, style, group, inherit)

Pixel zim class extends ZIM Bitmap which extends CreateJS Bitmap DESCRIPTION Uses raw canvas processing to pixilate a Display Object. This is not a pixel by pixel process like the ZIM Effects (BlurEffect, GlowEffect, etc.) So the speed is very fast. The Display Object is cached, scaled down and scaled back up with image smoothing disabled. The scaling proceedure is actually faster than scaling with image smoothing turned on. This effect has been available on the canvas all along, ZIM Pixel makes it easier to use. SEE: https://zimjs.com/zim/pixel.html https://zimjs.com/zim/pixel2.html NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// pixelate a Circle
const circle = new Pixel(new Circle(200,red)).center().drag();

EXAMPLE

F.color = darker;
function makePixel() {
   return new Pixel(new Circle(40,[pink,blue,purple]),.3)
      .alp(.5)
      .reg(CENTER);
}
new Emitter({
   obj:makePixel,
   force:{min:.5, max:2},
   gravity:0,
   life:3,
   shrink:false,
   layers:BOTTOM,
   animation:{
      props:{rotation:[-360, 360]},
      time:{min:1,max:10},
      ease:"linear",
      loop:true
   }
}).center();

CLOSE ▲

Parallax(layers, damp, auto, stage, startPaused, mouseMoveOutside, clamp)

Parallax zim class DESCRIPTION Takes objects as layers and sets properties based on an input, for instance, each layer could move a different x based on position of mouseX or each layer could scale a different amount based on scroll of y. The types of input are mouseX, mouseY, scrollX, scrollY or custom. The types of properties to change could be x, y, scaleX, scaleY, rotation, alpha, frameNumber, etc. Parallax allows scale to be a property which scales scaleX and scaleY together. Parallax allows frame to be a property and calls gotoAndStop() on a Sprite frame. Parallax really just manages multiple ProportionDamp objects. For proper parallax, the objects closer move more than the objects farther back. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// make assets to move around
// these could be pictures, shapes, containers, etc.
const backing = new Rectangle(800, 200, "yellow").center();
const mid = new Rectangle(400, 200, "green").center().mov(0,20);
const front = new Circle(60, red).center().mov(0,80);

// make Parallax object - here we move with stage mouseX and mouseY
const parallax = new Parallax([
   {obj:backing, prop:"x", propChange:50}, {obj:backing, prop:"y", propChange:40, input:"mouseY"},
   {obj:mid, prop:"x", propChange:100}, {obj:mid, prop:"y", propChange:80, input:"mouseY"},
   {obj:front, prop:"x", propChange:150}, {obj:front, prop:"y", propChange:100, input:"mouseY"}
], .1);

S.update();

EXAMPLE

// interact outside a stage
// this example has a small stage in the middle of the HTML page
// see https://zimjs.com/explore/parallax.html
const parallax = new Parallax({mouseMoveOutside:true, startPaused:true});
const colors = series(black, white);
new Rectangle(W, H).center()
loop(10, (i, total)=>{
   var rect = new Rectangle(W*(1-i/10), H*(1-i/10), colors()).center();
   parallax.addLayer({
      obj:rect,
      input:"mouseX", // default so don't need...
      prop:"x", // default so don't need...
      propChange:40*i,
      inMin:-1000,
      inMax:W+1000
   });
   parallax.addLayer({
      obj:rect,
      input:"mouseY",
      prop:"y",
      split:true,
      propChange:40*i,
      inMin:-500,
      inMax:H+500
   });
});

// starting the parallax paused so this will unpause when mouse is over stage
S.on("stagemousemove", e=>{
   if (S.mouseInBounds) { // now that state is set to move outside...
      // go immediately to the target input - needs to be done for each layer
      var targets = [];
      loop(10, function (i) {
         targets.push(e.stageX, e.stageY)
      });
      parallax.immediate(targets); // pass in the array
      parallax.pause(false); // start the parallax
      e.remove(); // end event
   }
});

PARAMETERS supports DUO - parameters or single object with properties below layers - (default null) an array of layer objects, the format as below Example: to move an obj 200 px in the x as the window scrolls from 100 to 300 px in the y [{obj:obj, prop:"x", propChange:200, input:"scrollY", inMin:100, inMax:300, factor:1, integer:false}, etc.] obj - the object whose property is being changed prop - the property that is being changed propChange - how much you want the property to change input - (default mouseX) but can also be mouseY, scrollX, scrollY inMin - (default 0) minimum input range inMax - (default W (for x prop) H (for y prop)) maximum input range factor - (default 1) set factor to -1 to change in the opposite direction integer - (default false) set to true to round the value to an integer split - (default true for mouseX, false for others) centers input so half output is on one side and half on the other immediate - (default null) set to a value to set property immediately take that value without damping from current property value Example 2: a traditional mouse move parallax for one object [{obj:obj, prop:"x", propChange:100}, {obj:obj, prop:"y", propChange:50, input:"mouseY"}, etc.] you would probably have more objects to follow or you can add these one at a time with the p.addLayer({layer object properties}); damp - (default .1) the damp value with 1 being no damping and 0 being no movement auto - (default true) uses the specified input if auto is set to false, you must make your own new Ticker and use the step(input) method stage - (default the default frame's stage) the stage - specify this if multiple stages startPaused - (default false) set to true to start parallax paused - set paused(false) to unpause it mouseMoveOutside - (default true) set to false to not allow mouse movement outside the stage to affect motion clamp - (default true) set to false to allow range outside min and max NOTE ticker and fps parameters have been removed - see zim.Ticker to set METHODS addLayer({layer object properties}) - adds a layer - returns object for chaining removeLayer(index) - removes a layer based on order added - returns object for chaining step(input) - used when auto is false to send in custom input data - returns object for chaining immediate([]) - an array of inputs for each layer used to immediately set the target value with no damping - returns object for chaining pause(state) - pauses or unpauses the parallax - state defaults to true - see also startPaused - returns object for chaining dispose() - removes listeners PROPERTIES type - holds the class name as a String damp - allows you to dynamically change the damping paused - read-only boolean whether the parallax is paused - see pause() and startPaused property CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

Flipper(front, back, interactive, time, vertical, flipped, ease, frontPress, backPress, reverse, continuous, style, group, inherit)

Flipper zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION Flipper lets you flip between two DisplayObjects. It has a back and a front that can be any display object. You press it and it flips. The flip() method allows you to programmatically flip it or pass in true or false to flip on or off. A flipped property tells you if it is flipped. There is a "flip" event for when it starts to flip and a "flipped" event for when it is done flipping. See: https://zimjs.com/cat/flipper.html See: https://zimjs.com/elearning/match.html See: https://codepen.io/zimjs/pen/LYRxprK NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

STYLE = {borderColor:dark, borderWidth:2};
const front = F.makeIcon().sca(2.5);
const back = new Page(front.width, front.height, blue, green, 1);
const label = new Label("ZIM Flipper").center(back);
const card = new Flipper(front, back).center();

EXAMPLE

const page1 = new Page(400,600,red,purple);
// Find emoji and paste from here
// https://emojipedia.org/clockwise-vertical-arrows/
// or use Pizzazz_02 https://zimjs.com/bits/view/icons.html
new Emoji("\ud83d\udd03", 60, true)
   .expand()
   .ble("darken")
   .pos(20,20,RIGHT,TOP,page1)
   .tap(() => {flipper.flip();});
   
const page2 = new Page(400,600,yellow,orange)
new Emoji("\ud83d\udd03", 60, true)
   .expand()
   .ble("darken")
   .pos(20,20,RIGHT,TOP,page2)
   .tap(() => {flipper.flip();});
   
const flipper = new Flipper({
   front:page1,
   back:page2,
   reverse:true,
   interactive:true,
   frontPress:false, // optional
   backPress:false  // optional
}).center();

// add after card is in place so can set drag boundary
const circ = new Circle().center(page1).drag(page1);

// set drag after card has been flipped to set drag boundary
const rect = new Rectangle().center(page2);

flipper.on("flipped", ()=>{
   rect.drag(page2);
}, null, true); // once

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) front - (default F.makeIcon().sca(2)) a DisplayObject for the front (this will be centerReg() in Flipper) back - (default new Page(front.width, front.height, dark)) a DisplayObject for the back (this will be centerReg() in Flipper) interactive - (default false) set to true if items in front or back need to be interactive which will add default mousedown flip events on backing if there is a backing (like on a ZIM Page) or on whole side if interactive is true then mouseChildren properties of the sides are automatically set to false time - (default .2) the time in Seconds for flipping (also see ZIM TIME constant) vertical - (default false) set to true to make card flip vertically flipped - (default false) start the card flipped easeRoot - (default "quad") the type of easing like "back", "elastic", "bounce" but just the root - not the "In" or "Out" part frontPress - (default true) set to false to make the card NOT flip on mousedown of the front backPress - (default true) set to false to make the card NOT flip on mousedown of the back reverse - (default false) set to true to flip in the opposite direction continuous - (default false) set to true to flip continously in the same direction style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS flip(state, time) - flip the card or specify a true or false for first parameter to either go to flipped or non-flipped time defaults to the Flipper() time parameter clone() - makes a copy with properties such as x, y, etc. also copied dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String flipped - true if showing back or false if showing front front - the front DisplayObject will be given an other property to the back DisplayObject will be given an flipper property to the flipper object back - the back DisplayObject will be given an other property to the front DisplayObject will be given an flipper property to the flipper object ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. ACTIONEVENT This component is affected by the general ACTIONEVENT setting The default is "mousedown" - if set to something else the component will act on click (press) EVENTS dispatches a "flip" event when the fipper starts the flip dispatches a "flipped" event when the fipper ends the flip ALSO see the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

Book(width, height, pages, startPage, rollUp, radius, backgroundColor, arrows, handleHTML)

Book zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION Creates a book with pages that flip like a real book. The user can flip pages by dragging the pages or using the arrows. The pages can be turned with code using nextPage() and prevPage() methods and specific pages can be turned to with the gotoPage() method. The pages are passed in as an array and can include interactivity. Book is different than ZIM Pages which have transitions and do not "flip". See: https://zimjs.com/cat/book.html See: https://zimjs.com/five/book.html - for a simple book of images made in five minutes! See: https://zimjs.com/darklo - an example with SLam DarkLo pottery. NOTE Book might need a last page on the right to work properly if that is the case just add an extra blank page with F.color if needed. NOTE Using horizontal pages currently makes the page turning glitchy - will look into it soon - Feb 23, 2023 NOTE do not use transparent pages or the book workings will be revealed NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// The pages in the book can be fully interactive
// but here is an example of just loading images into the book
// note - import ZIM and CreateJS in a script file above
// copy the template from https://zimjs.com/code.html

const path = "covers/"; // the folder with the images
const assets = ["build.jpg", "castle.jpg", "ganymede.jpg", "lastyear.jpg", "martian.jpg"];
new Frame(FIT, 1024, 768, darker, darker, ready, assets, path);
function ready() {

// get one picture to find the size of the book
const pic = new Pic("build.jpg");
new Book(pic.width*2, pic.height, assets).center();

} // end of ready

EXAMPLE

STYLE = {width:W/2, color:series(blue, pink, yellow, green)};
// add anything you want to each of these Pages
const page1 = new Page();
const page2 = new Page();
const page3 = new Page();
const page4 = new Page();
const pages = [page1, page2, page3, page4];
// 0 (default) will show only page 0 at right - like a cover
// 1 will show page 0 and page 1 to start - like an open book
new Book(W, H, pages, 1).addTo();

EXAMPLE

// to remove interactivity remove the stage and frame events
// these get added in a slight delay, so remove them in a slight delay
timeout(.1, ()=>{
   S.off("stagemousedown", book.stageEvent);
   F.off("keydown", book.keydown);
});

// to add the interactivity again use:
book.stageEvent = S.on("stagemousedown", book.stageEvent);
book.keydown = F.on("keydown", book.keydown);
// (note, the events are reassigned to the properties)

PARAMETERS ** supports DUO - parameters or single object with properties below width - (default zimDefaultFrame width) the width of the book (including both sides) height - (default zimDefaultFrame height) the height of the book pages - an array of DisplayObjects to show as pages or pass in an asset string - for instance an image to show an image these images can be preloaded with the asset parameter of Frame do not use transparent pages or the book workings will be revealed startPage - (default 0) 0 will start with a "cover" at right. setting this to 1 will start with no "cover" but rather a left page and a right page showing setting to 2 will have a "cover" but initially show page 1 and 2 (not the cover), etc. rollUp - (default 1) seconds before showing a corner hint - set to false to not show the corner radius - (default false) pages will use full page to drag unless a radius is set then the drag corner will be available at the radius distance from the bottom corners backgroundColor - (default clear) the backing color of the book (if first or last page is a single page) arrows - (default true (.2 seconds)) set to true or the number of seconds for arrows to turn page. See also ZIM TIME constant handleHTML - (default true) set to false to not automatically remove and add the HTML overlays for Loader, TextArea or Tag objects METHODS nextPage(time) - animate the page to the next page at provided time in seconds (default .1). See also ZIM TIME constant prevPage(time) - animate the page to the previous page at provided time in seconds (default .1). See also ZIM TIME constant gotoPage(num, time) - animate to a page at provided time in seconds (default .1). See also ZIM TIME constant changeFrame(frame) - use this method if book is moved to another frame dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String page - get or set the index number of page - will animate at a .1 speed (see gotoPage()) when asked for this will be the right hand page index pageNext - get the next page if rollPress has triggered (see rollPress event) the next page is the right hand page index so if going right, not actually the next page but one more directPage - get or set the index number of a page - will NOT animate in going to the page note: the book must be on the stage (or in a container on the stage) before using this property direction - get the direction the page is animating to - either LEFT or RIGHT or if asked for on roll events will tell LEFT or RIGHT side lastPage - get the index number of the page that was just animated (available in page event) note: pages may skip by 2 pages - read only array of pages - this are the original pages array passed in note: at this time, the Book must be remade to add or remove pages peel - the peel ZIM Shape backPrev - read only page behind the right side peel roll corner backNext - read only page behind the left side peel roll corner moving - get whether the page is being animated handleHTML - get or set whether to automatically handle HTML overlays for Loader, TextArea or Tag objects ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS dispatches a "page" event when the page is turned dispatches a "pageanimate" event when the page starts to animate to new page dispatches a "pageturn" event when gotoPage() or page property starts to turn a page (not user dragged page) dispatches a "pagedone" event when gotoPage() or page property finishes animating its last page (not user dragged page) dispatches a "rollup" event when corner starts to roll up if rollup is true dispatches a "rollpress" event when page (or corner when radius) is pressed for rolling up - see page and direction properties dispatches a "rolldown" event when corner finishes rolling down ALSO see the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

Scrambler(tile, keys, keyProperty, scramble, time, wait, num, shadowColor, shadowBlur, swap, swapLock, style, group, inherit)

Scrambler zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION Takes a ZIM Tile and scrambles its items allowing the items to be dragged to unscramble. Works on horizontal, vertical or grid versions of Tile (as in one column, one row or multiples) Dispatches a "complete" event when done. Can pass in an optional keys array that must match key properties or an existing property of type keyType. This allows, for instance, matching duplicate letters or colors. See: https://zimjs.com/cat/scrambler.html NOTE if using Adobe Animate then use the latest ZIM version of CreateJS - see https://zimjs.com/cdn/ NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// tile a rectangle with a color series, a dark border of width 3
// 4 columns and 1 row with a spacingH of 10
const tile = new Tile(new Rectangle(100,100,series(orange, green, blue, pink)), 4, 1, 10);

// add the tile to the Scrambler - by default it scrambles
const scrambler = new Scrambler(tile).center();

// when the tile is unscrambled it calls the complete function
scrambler.on("complete", ()=>{
   zogg("Yay!");
});

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) tile - an ZIM Tile keys (default null) - An optional array of values that the order of the tile must match Without keys, Scrambler will match the exact starting order but sometimes there are multiple answers like two letter Ts or three color blues To solve this issue, a keys array can be provided Each tile should be given a key property to match the desired keys array For instance if keys = ["big", "small", "big", "small", "medium"] then each tile item should be given a item.key = "big", etc. The "complete" event will be dispatched when the tile key properties are in the order of the keys Also see keyProperty below for an alternative. keyProperty (default null) - An optional tile item property to use to match the keys array (must have a keys array) For example, if keys = ["L", "O", "V", "E", "L", "Y"] There are two "L" items so matching the starting order is not necessary as the L items could be swapped and still be a correct answer If the items are ZIM Label objects (use the Label backing property to make tiles) then set the keyProperty to "text" and this will be used to match the keys array Another example - if keys = [blue, green, blue, red] then set keysArray to "color" if a set of Rectangles are tiled with these colors scramble (default true) - set to false to not scramble the tile - see also the scramble() method time (default null) - if scramble is set, this is the time in seconds to animate the scramble - see also ZIM TIME constant wait (default null) - if scramble is set, this is the time in seconds to wait to scramble - see also ZIM TIME constant num (default 1) - the number of times it will scramble within the time given if a time is given otherwise always just one this is good to scramble a small number of things - for instance set to 3 to visibly scramble 4 things... shadowColor - (default rgba(0,0,0,.3)) set to -1 for no shadow shadowBlur - (default 5) how blurred the shadow is if the shadow is set swap - (default false) set to true to not automatically shift tiles and swap the dragged tile with the tile that is dropped on swapLock - (default false) set to true to lock tiles that are in the right spot - will set swap to true style - (default true) set to false to ignore styles set with the STYLE - will receive original parameter defaults group - (default null) set to String (or comma delimited String) so STYLE can set default styles to the group(s) (like a CSS class) inherit - (default null) used internally but can receive an {} of styles directly METHODS scramble(time, wait, num) - scramble the tile - this is done by default when making the Scrambler but the default can be set to false and scramble called manually - or to rescramble, etc. time and wait default to 0 and are the seconds to animate and wait to animate - also see ZIM TIME constant num is how many times to scramble within the time - set to 3 for instance to scramble a small number of items note that the tiles cannot be dragged from when called to when done scrambling returns object for chaining solve(time, wait, disable) - solve the tile - so arrange the tile in the start order time and wait default to 0 and are the seconds to animate and wait to animate - also see ZIM TIME constant disable defaults to true and will stop the tile items from being draggable after solved this uses a noMouse() so mouse() can be called on each tile item at a later point if desired test() - returns true if tiles match starting orientation or keys if keys provided testItem(item, index) - test a specific item in the Scrambler to see if correct - index is optional otherwise it will calculate it note - there is a "complete" event and complete property so usually there is no need to test an item update() - if the Scrambler is moved in its container, call update() to reset drag boundary clone() - makes a copy with properties such as x, y, etc. also copied dispose() - removes from parent, removes event listeners - must still set outside references to null for garbage collection ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - holds the class name as a String tile - reference to the ZIM Tile used complete - get whether the Scrambler is complete - also see the "complete" event starts - an array of start indexes (will be [0,1,2,3...]) order - get or set an array of the current index order (will be the scrambled order - eg. [3,2,0,1...]) ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS dispatches a "complete" event when the tile changes to the same order as the start order dispatches a "scrambled" event when the tile is finished scrambling ALSO see the CreateJS Easel Docs for Container events such as: added, click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

Scroller(backing, speed, direction, horizontal, gapFix, stage, container, backing2, style, group, inherit)

Scroller zim class extends a createjs.EventDispatcher DESCRIPTION Scroller animates a backing either horizontally or vertically (not both). The Scroller object will create a clone of the backing and animate and swap the backgrounds when needed. NOTE A scroller can be added to a Accelerator object this will allow the percentSpeed to be synched with other Scroller and Dynamo objects See https://zimjs.com/zide/ See https://zimjs.com/explore/sidescroller.html (with keys) NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const one = new Rectangle(1200, 400, red);
F.makeCircles().center(one);
S.addChild(one);

const scroller = new Scroller(one);

S.update();

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) backing - an object to animate (make start and end edges match to be seemless) speed - (default 1) how fast in pixels per second the animation is going direction - (default 1) set to -1 for left or down horizontal - (default true) set to false to animate vertically you can adjust the speed and direction properties dynamically you cannot adjust the backings and horizontal dynamically to change your animation, dispose() of the Scroller object and make a new one disposing just removes the ticker - you have to remove the backings NOTE: the gapFix and ticker parameters have been removed - see zim.Ticker gapFix - (default 0) if a thin line appears when changing speed - try setting to 1 or 2 stage - (default background.stage) if the background is not on the stage then need to pass the stage it will be on container - (default stage) what bounds are used for wrapping the background METHODS pause(state, time) - state defaults to true and pauses the scroller (sets speed to 0) set state to false to unpause the scroller (sets speed to speed before pausing) set the time (default 0) to the seconds to take while slowing the scroller to 0 speed (also see ZIM TIME constant) dispose() - get rid of the event listeners - you need to remove the backings (see backing properties) PROPERTIES type - holds the class name as a String backing1 - the original backing passed in backing2 - the cloned backing made from the original backing speed - how fast the animation is going in pixels per frame baseSpeed - the scroller speed when it was first made (or can override) used to determine percentage speed for percentSpeed property percentSpeed - get or set the percentage of the baseSpeed - eg. 100 is at the baseSpeed this allows you to animate multiple scrollers relative to one another See ScrollerManager class percentComplete - get or set the percentage the scroller has moved the percentage is the distance/width*100 for horizontal or distance/height*100 for vertical direction - 0 for no direction, either left (-1) or right (1) if horizontal or up (-1) or down (1) if not horizontal paused - read only - true if paused and false if not - must be set with pause() method EVENTS Dispatches a "pause" event when paused is complete (sometimes a delay to slow to pause) CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

Dynamo(sprite, speed, label, startFrame, endFrame, update, reversible, flip, flipVertical, style, group, inherit)

Dynamo zim class - extends a createjs EventDispatcher DESCRIPTION A Dynamo can run any Sprite animation at varying speeds You pass in an optional label, or start and end frames to define the animation frames You can animate a Dynamo using speed or percentSpeed percentSpeed is handy for animating at speeds relative to other animations and scrollers You can control Dynamo speeds with mouse position - or in a Parallax object A Dynamo loops automatically - you can pause it (with optional slowing or optional frame) and unpause it (with optional quickening) You can also get or set its frame property at which point, it will loop from there (unless paused) A Dynamo dispatches a "change" event every time the frame changes and a loop event every time it loops to the start and a paused event when paused NOTE A Dynamo requires constant S.update() to run the Sprite A Ticker.add(function () { // speed Code}) or just new Ticker.always() will provide the update NOTE A Dynamo can be added to a Accelerator object (and then to a MotionController) this will allow the percentSpeed to be synched with other Scroller and Dynamo objects See https://zimjs.com/zide/ See https://zimjs.com/explore/sidescroller.html NOTE Dynamo is an alternative to a Sprite.run() where you provide a set time for animation but you can pause a Dynamo and then use run() and then unpause the Dynamo when the run is done If you are controlling the Dynamo in a new Ticker.add() function, then make sure to remove() the new Ticker function when the Dynamo is paused NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// *** the Sprite will not run with a Dynamo unless there is a constant S.update()
// The new Ticker will provide a constant S.update() so that is good!

// we have a sprite of a guy and it has a "walk" animation
// we can make this run faster and slower with an accelerator:
// we pass in a speed of 30 fps and this becomes the baseSpeed

const dynamo = new Dynamo({sprite:sprite, speed:30, label:"walk", reversible:false});
Ticker.add(()=>{
   // the sprite will run at 0 speed when the cursor is at the left of the stage
   // and get faster as the cursor moves to the right
   // at the middle it will be 30 fps and at the right it will be 60 fps
   dynamo.percentSpeed = F.mouseX/W*100*2;
});

// Here we apply damping and make the sprite play backwards at the left of half stage
var dynamo = new Dynamo(sprite, 30, "walk");
Ticker.add(()=>{
   // will play backwards at 30 fps at left and forwards at 30 fps at right
   // it will stop at half the stage width
   // reversible false means it will not walk backwards
   // but rather it will flip and walk in the left direction when the speed is negative
   dynamo.percentSpeed = F.mouseX/W*200 - 100;
});

PARAMETERS ** supports DUO - parameters or single object with properties below ** supports OCT - parameter defaults can be set with STYLE control (like CSS) sprite - the sprite to control speed - (default 30) the frames per second at which to animate the sprite label - (default null) the label of the sprite to play (see Sprite) startFrame - (default 0) the frame to start the animation (ignored if a label is provided) endFrame - (default sprite.totalFrames) the frame to end the animation (ignored if a label is provided) update - (default false) set to true to update the stage (only do this if you are not already updating the stage!) reversible - (default true) will allow percentSpeed to be negative and reverse the animation. Set to false to use absolute value. flip - (default true if reversible is false) will flip the scaleX of the sprite if speed is negative and reversible is set to false. the pairing of reversible false and flip true will make a Sprite turn and walk the other way if the speed is negaitive Note: also see the scaleX property flipVertical - (default false) flip the Sprite in the vertical if the speed is negative (note also see the scaleY property) METHODS pause(state, time, frame) - the way to pause or unpause a Dynamo affecting the sprite animating state - (default true) true pauses and setting the state to false will unpause the animation time - (default 0) time in milliseconds to slow the animation down if pausing or speed it up if unpausing frame - (default null) which frame to pause on - overrides time (unless you want to do the calculation...) dispose() - cancels the requestAnimationFrame PROPERTIES type - holds the class name as a String frames - an array of frame numbers the Dynamo is acting on according to label, or startFrame, endFrame frame - the current frame of the Dynamo - this is sequential relative to frames whereas the actual Sprite frame may be different as labels can specify non-consecutive frame numbers totalFrames - the total frames in frames (may be different than the Sprite's total frames) percentSpeed - get or set the percentage of the baseSpeed - eg. 100 is a the baseSpeed this is what you should animate to speed up and slow down the sprite this allows you to set the speed relative to other Sprites and Scrollers speed - get or set the speed of the sprite in frames per second baseSpeed - the start speed given in frames per second unless changed with this property this affects the percentSpeed so usually it is not adjusted - but it can be paused - read only - whether the Dynamo is paused or not (by using the pause() method) scaleX - starts with the original scaleX of the Sprite if you flip the sprite and are scaling the Sprite manually, then also set the scaleX of the dynamo to match scaleY - starts with the original scaleY of the Sprite if you flip the sprite and are scaling the Sprite manually, then also set the scaleY of the dynamo to match EVENTS dispatches a "change" event when the Dynamo changes frame dispatches a "loop" event when the Dynamo loops (possibly in reverse) dispatches a "pause" event when the Dynamo is paused - could be delayed CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

Accelerator(objects)

Accelerator zim class extends a createjs.EventDispatcher DESCRIPTION An Accelerator lets you set percentSpeed properties of multiple objects such as Scroller and Dynamo (Dynamic Sprite) objects or an object animating with animate() and the dynamic parameter set All these have a percentSpeed property which can be set by the Accelerator to operate the speeds. They can also be paused and paused over time. An Accelerator object lets you control these from one place See: https://zimjs.com/explore/sidescroller.html NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const rect = new Rectangle()
   .centerReg()
   .animate({props:{rotation:360}, ease:"linear", dynamic:true});
const accel = new Accelerator(rect);
// adjust speed of the animation by mousedown
// 0% at left, 50% in middle, 100% at right, etc.
new MotionController(accel);
// or
new MotionController({target:accel, type:"mousemove", minPercentSpeed:-200, maxPercentSpeed:200});
// will change speed from -200% to 200% as cursor is moved across screen

EXAMPLE

// assuming we have scroller1, scroller2 and a sprite
// each of these would have a speed set so the scene animates nicely
const accelerator = new Accelerator([scroller1, scroller2, sprite]);

// here we increase the speed then decrease the speed of the whole scene:
animate({target:accelerator, obj:{percentSpeed:200}, time:1, rewind:true, ticker:false});

// here we change the speed of the whole scene based on the x position of the mouse
// at the very left, the speed is -200 percent and at the right the speed is 200 percent
// in the center, the speed is 0 - damping is optional but always looks better!
const damp = new Damp(accelerator.percentSpeed);
Ticker.add(()=>{
   var newSpeed = (F.mouseX-W/2)/(W/2)*100*2;
   accelerator.percentSpeed = damp.convert(newSpeed);
});

PARAMETERS objects - (default null) registers Scroller or Dynamo objects the Accelerator pass in a single object or an array of multiple objects METHODS add(objects) - registers Scroller or Dynamo objects with the Accelerator pass in a single object or an array of multiple objects returns the Accelerator object for chaining remove(objects) - unregisters a Scroller or Dynamo pass in a single object or an array of multiple objects returns the Accelerator object for chaining pause(state, time, frameNumber) - pause (default) or unpause all the objects added to the Accelerator state - (default true) set to false to unpause the objects added to the Accelerator time - (default 0) time in milliseconds to slow down to a speed of 0 and pause the pause event and paused property will be set after the time has passed time is ignored if a frameNumber is provided frameNumber - (default null) get sprites to animate to the frameNumber (probably good for one sprite!) setting this will make the scene ignore the time parameter above dispose() - calls dispose() on all the objects PROPERTIES type - holds the class name as a String percentSpeed - adjusts the speed relative to the baseSpeed of each items in the Accelerator - eg. 100 is at the baseSpeed this can be dynamically changed to change all speeds relatively paused - (read only) whether the Accelerator is paused or not - only tracks if the pause() method is used items - an array of all objects added with add() CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

Emitter(obj, width, height, interval, num, life, fade, shrink, warm, decayTime, decayStart, trace, traceFadeTime, traceShiftX, traceShiftY, angle, force, gravity, wind, layers, animation, random, horizontal, vertical, sink, sinkForce, cache, events, startPaused, pool, poolMin, particles, focusWarm, style, group, inherit)

Emitter zim class - extends a zim.Container which extends a createjs.Container DESCRIPTION A particle emitter - so this makes and animates display objects like shapes or bitmaps Particle emitters are often used for things like fireworks, fire, smoke, sparks, falling objects, etc. The Emitter is filled with options so have a look at the doc parameters Here are some examples: https://zimjs.com/particles/ NOTE consider the Emitter as somewhat experimental and pushing the bounds of the canvas In future versions we will look into adding CreateJS StageGL (WebGL) examples / support (it might work already) The Emitter certainly can make excellent and workable effects But it can also bog the browser if pushed to extremes or sometimes if left going This possibly means there are memory leaks - we have been doing our best to track things down The Emitter is reporting an expected number of children so any leaks might be beyond ZIM control NOTE each particle starts at the center of the container width and height If the trace parameter is true then the particle is put in a container that does not move and the particle moves inside that container as the container is cached with the source-over composite operation The currentParticle property and all the event objects' particle parameter is the moving particle However, the children of the Emitter, will be slightly different in each case: when trace is false, the children of the Emitter container are any active particles when trace is true, the children of the Emitter container are the containers that hold the active particles If you have moved, scaled or rotated the Emitter or its container, then you will want to use var point = myEmitter.localToGlobal(particle.x, particle.y) and get point.x and point.y to find the location of the particle relative to the stage coordinates PARTICLES CONTAINER By default, the Emitter will make a Container and place it beneath itself when added to the stage. by separating the particles from the emitter, it allows the emitter to be moved without all the particles moving the container will be given a type of "Particles" NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// make a bunch of spewing pink circles affected by gravity
const emitter = new Emitter(new Circle(5, pink))
   .centerReg();

EXAMPLE

// use a sink to attract the particles
const sink = new Circle(10, pink).centerReg().alp(0);
// make one of three types of particles and randomize the colors
const particles = new Emitter({
   obj:[
      new Circle(20,null,darker,2),
      new Rectangle(30,30,null,darker,2),
      new Triangle(40,40,40,null,darker,2)
   ],
   random:{color:[blue, green, pink, yellow, orange]},
   interval:.02, // default
   life:5,
   decayTime:1, // default
   sink:sink,
   sinkForce:.5,
   gravity:0,
   force:1,
   cache:mobile(), // default
})
   .centerReg()
   .sca(2);

EXAMPLE

// use warm:true to start with rings already emitted
const emitter = new Emitter({
   obj:new Circle({
      radius:10,
      borderColor:white,
      borderWidth:30,
      strokeObj:{ignoreScale:true}
   }),
   warm:true,
   force:0,
   gravity:0,
   shrink:false,
   fade:false,
   life:3,
   interval:.5,
   animation:{props:{scale:40}, time:3, ease:"linear"}
}).center();
emitter.particles.setMask(new Rectangle(400,400).center().alp(0));

EXAMPLE

// use a StageGL Frame and createjs.SpriteSheetBuilder for circles:
new Frame({ready, scale:FIT, width:1024, height:768, gpu:true});
function ready() {
   // if we pass in just a Circle then we would have to turn on cache
   // and cache on WebGL counts as an image for each one
   // whereas a SpriteSheet just counts as an image for all of the particles
   // so build a SpriteSheet from the Circle
   var builder = new createjs.SpriteSheetBuilder();
   builder.addFrame(new Circle(50, purple));
   builder.build();
   const emitter = new Emitter({
      obj:new Sprite({spriteSheet:builder.spriteSheet}),
      num:10, // ten Sprites made every .02 seconds for about 1000 particles per second
      life:2,
      interval:.02,
      gravity:0,
      force:2
   }).centerReg();
}

// see more examples at https://zimjs.com/particles

CLOSE ▲

Generator(color, strokeColor, strokeWidth, draw, stamp, setup, maxCount, boundary, drawCount, drawPause, drawSpacebarPause, startX, startY, cache, recordLinePoints, frame, seed, output, outputType, style, group, inherit)

Generator zim class - extends a ZIM Container which extends a CreateJS Container DESCRIPTION Used for dynamic drawing such as generative art or visualizations. Generator provides a set of RELATIVE drawing commands that primarily match the traditional absolute drawing commands for shapes on the canvas. Rather than add all these commands to the Shape class they have been added to the Generator class. This optimizes the Shape class which is used for all components and ZIM shapes. HOW IT WORKS The arrangement is similar to Processing (or P5js for a JS version). There is one Shape that gets drawn into and code can be put in three different callback functions: setup - happens once at the start (similar to Processing) draw - happens at the framerate (similar to Processing) stamp - loops all at once (different that Processing?) SETUP The optional setup runs once before the draw or stamp functions run. This function will not be used as much as in Processing because ZIM has a Frame(). Also, things can be set up before the Generator code is called. And the Generator class has parameters for color, strokeColor and strokeWidth. Generator defaults to start at the center of the stage - so in the setup, translate(-W/2, -H/2) could be used to start at the top left. Setup can be run again with resetup() DRAW The optional draw function runs at the framerate and receives count, total and shape parameters. This will have the affect of animating the drawing as it "processes" the code By default, this will pause and unpause when the screen or the spacebar is pressed. Draw can be drawn again with redraw() STAMP The optional stamp function runs inside a loop and produces the final drawing at once. The function receives count, total, shape and stampNum parameters. You can switch between the stamp and draw function with the same code inside. The end product will be the same. Stamps can be stamped again with restamp() RELATIVE The draw and stamp work the same way, running the code inside for each count. The magic happens because the commands are relative. Even g.rectangle().rotate(5) is beautiful. Each new rectangle after the first will be rotated 5 degrees In absolute space, the corner points would have to be calculated with sine and cosine - ew. Generator does the matrix calculations to avoid this. Each new command starts where the last command left off. But each command also has an x and y value to translate if desired. This x and y value is relative to the current rotation and scale. Often, the x and y is left at 0, 0. We considered removing them as parameters because translate() can be called but we left them in to be the same as Processing. COUNT, PAUSE AND STEP The count parameter of draw or stamp suplies the current count. This provides ways to modify commands. for instance circle(0,0,count*10); will draw circles that get bigger. This can also be used to set the rate of change - often by using smaller factors such as count*.01, etc. Count can also be used to pause or do something different at certain places in the drawing Pause also has an optional number of seconds to pause or a ZIM interval() and pause(false) can be used. Generator has a count property which can be set to go forward or back to a certain count. Step calls a step - usually used when pause is true - an interval could then be used for steps PUSH AND POP There is also push() and pop() as in Processing. These remember the position, rotation, scale and skew when push() is used and then return the generator to these settings when pop() is used. Multiple pushes can be set and then popped back. These can be used to make fractals with recursive branching. CLEAR AND RESET The clear() method will clear the image but keep the transforms The reset() method will reset the transforms, set to startX and startY and reset color, strokeColor and strokeWidth These can also be called through resetup(), redraw() and restamp() EXPORT Generator() can export frames as images that can then be compiled into a video. Set the output parameter to true or a file prefix string (otherwise the prefix will be gen). This will make Generator() use draw (even if stamp is set) at 6 frames per second so the Browser can handle file saves. The files will be saved with 6 numbers: gen_000000.png, gen_000001.png, etc. They will be saved in your Browser's default downloads so MOVE them into a folder of their own. See the note at bottom about enabling Browser Automatic Downloads. NOTE the canvas background color does not show up if desired, add a new Rectangle(W, H, F.color).addTo().bot(); NOTE Generator() will output the first image before it starts drawing. You can delete the first image if you want the video to start at the first drawn frame. NOTE FFmpeg is suggested but there are other options such as https://github.com/spite/ccapture.js Or screen capture software such as OBS - if just posting to Twitter and quality does not matter. Instructions to make a video from saved image series: Download FFmpeg: https://zimjs.org/cdn/ffmpeg.zip, UNZIP it and put it INTO the image folder. Open a command line. On PC, type "command" into the Windows search box then on the command line type: cd \path\to\images or to change drive use /d like cd /d E:\path\to\images Once in the directory with your images type (or paste) something like: ffmpeg -r 60 -f image2 -s 1024x768 -i gen_%06d.png -vcodec libx264 -crf 25 -pix_fmt yuv420p final.mp4 You can read about these at https://www.ffmpeg.org/ffmpeg.html (but would not bother) -r framerate (fps) -f canonical form (image2 to work with image sequences) -s resolution -i file name to find with %06 representing 6 decimal placeholder -vcodec codec -crf quality - the lower the better... 10-30 is fine -pix_fmt pixel format final.mp4 the output video NOTE to enable Multiple File Downloads in Chrome "simply" go to menu > Settings > Privacy & Security > Site Setting > Permissions > Addtional Permissions > Automatic Downloads > turn Ask ON We found that ADD site: file:///path/ to local file did not seem to prevent Chrome from asking. And part way through Chrome asked again for permission to download but the process still worked. Alternatively, we could look at saving Blobs (data) of the images but the download process works. GENERAL EXAMPLES SEE: https://zimjs.com/cat/generator.html SEE: https://zimjs.com/codepen/bloob.html // for animating stamps with noise NOTE The drawing uses matrix transforms on Shape which takes the shape out of traditional positioning. A drawing property is available on the Generator that points to a Container that holds the drawing. This container can be moved, dragged, etc. so use this to manipulate the drawing in a traditional manner. The generator has a shape property which can be used to access the raw shape for absolute drawing for instance. NOTE The drawing container is automatically added to the default stage as the Generator is created NOTE if manually caching generator.shape or generator.drawing, there is a slight time delay before shape is drawn so cache when the "complete" event is called NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// Draw a line from the center of the stage to 100 pixels to the right
// usually we draw inside a draw or stamp function
const g = new Generator();
g.line(0,0,100,0);

EXAMPLE

// draw an octagon - stop at 8 lines
const g = new Generator({draw:gen});
function gen(count) {
   g.line(0,0,100,0).rotate(45);
   if (count == 8) g.stop();
}

// or use maxCount:
const g = new Generator({draw:gen, maxCount:8});
function gen(count) {
   g.line(0,0,100,0).rotate(45);
}

// make a Blob with points of drawing
// could set interactive:false on Blob for just filled in picture
// lines will not fill in Generator
// shapes fill and curves fill themselves but not collectively
const g = new Generator({stamp:gen, maxCount:8, recordLinePoints:true});
function gen(count) {
   g.line(0,0,100,0).rotate(45);
}
g.on("complete", makeBlob);
function makeBlob() {
   new Blob({points:g.linePoints, color:red}).addTo();
   g.drawing.removeFrom()
   S.update();
}

EXAMPLE

// draw a fan of lines always going back to 0,0
const g = new Generator({draw:gen, maxCount:360/5});
function gen(count) {
   g.line(0,0,200,0).translate(-200).rotate(5);
}

// or stamp the fan of lines:
const g = new Generator({stamp:gen, maxCount:8});
function gen(count) {
   g.line(0,0,100,0).rotate(45);
}

// make random color lines with a hole in the middle and draggable
const g = new Generator({stamp:gen, strokeColor:[red,pink,purple], strokeWidth:2, maxCount:360/5});
function gen(count) {
   g.line(50,0,200,0).translate(-250).rotate(5);
}
g.drawing.drag();

// make a series of color lines with a hole in the middle and draggable
// using push() and pop() to not think about how to reset!
// so... draw a line, go back to how it was before drawing, rotate, then draw a line, etc.
// each time it draws the line it chooses the next ZIM VEE value in the series
const g = new Generator({stamp:gen, strokeColor:series(yellow,green,orange), strokeWidth:5, maxCount:360/5});
function gen(count) {
   g.push().line(50,0,200,0).pop().rotate(5);
}

// add a circle to the end
const g = new Generator({stamp:gen, strokeColor:series(yellow,green,orange), strokeWidth:5, maxCount:360/5});
function gen(count) {
   g.push().line(50,0,200,0).circle(15,0,5).pop().rotate(5);
}

// removing circle stroke and adding fill the same color as the stroke
// note, do not remove the stroke first or the currentColor will be null
// currentColor is the applied color from the ZIM VEE value
const g = new Generator({draw:gen, strokeColor:series(yellow,green,orange), strokeWidth:5, maxCount:360/5});
function gen(count) {
   g.push()
      .line(50,0,200,0)
      .fill(g.currentStrokeColor)
      .noStroke()
      .circle(15,0,5)
    .pop()
    .rotate(5);
}

EXAMPLE

// using ZIM VEE series to adjust stroke color and width
const g = new Generator({draw:gen, maxCount:360/2, strokeColor:green});
const s = series({min:1, max:4}).step(.1).bounce(); // stroke sizes
const c = series(blue,pink,green).every(12); // color change
function gen(count, total, g) {
   g
      .rectangle(0,0,200,200)
      .stroke(g.currentStrokeColor.toColor(c,.3), s) // blend color change
      .rotate(2);
}

EXAMPLE

// Clone example
const g1 = new Generator({draw:gen, maxCount:360/10});
function gen(count, total, g) {
   // note: we have three generators calling this function
   // so collect and use the generator g that is calling gen()
   g.rectangle(0,0,100,100).rotate(10);
}
const g2 = g1.clone();
g2.drawing.mov(100);
const g3 = g1.clone();
g3.drawing.mov(-100);

EXAMPLE

// draw rectangles that get smaller and translate like a starfish
const g = new Generator({
   draw:gen,
   color:series(yellow,green,orange),
   strokeColor:white,
   strokeWidth:3,
   maxCount:100/.3
});
function gen(count, total) {
   var mod = count*.3
    g.rectangle(mod, mod, 100-mod, 100-mod, 0).rotate(30);
}

EXAMPLE

// common processing tree
const g = new Generator({
   strokeColor:green,
   strokeWidth:2,
   setup:gen
});
function gen() {
   var length = 150;
   g.translate(0, H/2);
   branch(150, 5);
   // recursive function - not stamp or draw
   function branch(length, thickness) {
      g.line(0,0,0,-length);
      if (length > 4) {
         g.push().rotate(30);
         branch(length*.75);
         g.pop().push().rotate(-30);
         branch(length*.75);
         g.pop();
      }
   }
}

EXAMPLE

// Using restamp to animate Generator
// Radial Animation and Noise - also see:
https://codepen.io/danzen/pen/ExgQRjW
https://codepen.io/zimjs/pen/XWjrmoQ
https://codepen.io/zimjs/pen/jOMZjOy

const segments = 30; // how many lines
const delta = 360/segments; // angle between each line
const inner = 100; // inner radius
const outer = 300; // outer radius
const variation = outer-inner; // maximum noise

let c = 1;    // curve factor
let s = .02;    // speed factor
let t = 0;      // time

// The ZIM Generator() works somewhat like Processing / P5js.
// Setting stamp instead of draw will draw all generations immediately
// rather than one generation at a time.
const g = new Generator({
   stamp:gen,
   strokeWidth:2,
   maxCount:segments
});

function gen(count) {
   let angle = delta*count*RAD;  // (0-360 degrees in radians)
   // use sin and cos to make noise values join back at same place
   let noise = g.noise(c*Math.sin(angle), c*Math.cos(angle), t);
   let radius = inner+variation*noise;
   g.push()
      g.push().line(0,0,radius,0).pop().line(radius,-5,0,10);
   g.pop()
   g.rotate(delta); // rotate delta each time
}

Ticker.add(()=>{
   t+=s; // set the speed through the noise
   g.restamp();
});

CLOSE ▲

Pen(size, color, penType, damp, spread, borderColor, borderWidth, end, paper, nib, cache, ctrlKey, cropScale, undo, undoKeys, move, onTop, deleteable, doubleClickDelete, holdDelete, immediateStop, lineAlpha, lineBlendMode, frame, dashed, pullColor, pullThickness, style, group, inherit)

Pen zim class - extends a ZIM Container which extends a CreateJS Container DESCRIPTION Handles dynamic drawing with a set of different penTypes You can drag() or gesture() pen, move it with a MotionController(), animate() it, animate() it along a Squiggle or Blob path, etc. Holding down the CTRL key will allow the pen to move without drawing SEE: https://zimjs.com/pen.html NOTE the pen adds either a Bitmap (if cache is true) or a Shape (if cache is false) to the container the pen is added to. This is layered directly under the pen. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const pen = new Pen({penType:"kitetail", nib:new Circle(10,pink)}).center().drag();

EXAMPLE

// use a MotionController
const pen = new Pen().center();
const motionController = new MotionController({
   target:pen,
   type:"pressmove",
   speed:60,
   damp:.5,
   mouseMoveOutside:true
});

// if later, animation along a path is desired
// the motionController needs to be disabled
// and the pen set to write
motionController.enabled = false;
pen.write = true;

// position the pen at the start of the path
// and set its damping to start there too...
const path = new Squiggle().loc(100,100).alp(.1);
pen.loc(path.pointControls[0]);
pen.immediate(pen.x, pen.y);

// if animating along a path more than once
// make sure the percentComplete is reset to 0
// (this is a tricky one!)
pen.animate({
   // set:{percentComplete:0},
   props:{path:path},
   time:1,
   call:()=>{
      // to use the motionController again:
      pen.write = false;
      motionController.enabled = true;
   }
})

EXAMPLE

// A Pen used on two different Pages with ZIM Pages
// See https://zimjs.com/zapp/Z_VKB33

const page1 = new Page(W,H,orange,red);
page1.paper = new Container(W,H).addTo(page1);
const page2 = new Page(W,H,pink,purple);
page2.paper = new Container(W,H).addTo(page2);

const pages = new Pages([page1, page2]).addTo();
pages.active = false; // so drawing does not accidentally swipe pages

STYLE = {
   Arrow: {
      type:"angle",
      pages:pages,
      direction:series(RIGHT, LEFT),
      trans:"fan",
      rotation:series(0,180)
   }
}
const next = new Arrow().pos(50,50,RIGHT,BOTTOM);
const prev = new Arrow().pos(50,50,LEFT,BOTTOM);

const pen = new Pen({
paper:page1.paper,
size:20,
color:series(white,black)
}).addTo();

// switch papers
pages.on("page", ()=>{
   pen.paper = pages.page.paper;
});

new MotionController({
   target:pen,
   type:"pressmove",
   speed:40,
   mousedownIncludes:[pages] // so will track mouse on pages
});

CLOSE ▲

SoundWave(num, input, include, smoothing, min, max, operation, baseline, magnify, reduce, adjust, channel)

SoundWave zim class - extends a CreateJS EventDispatcher DESCRIPTION Receives a sound input and calculates frequency data using HTML AudioContext createAnalyser() The input can be the mic, a Synth tone(), play() or the result of a asset("someSound").play() or an <audio> tag You can specify the number of data points and then use the calculate() method to animate to sound NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// the app may need to be interacted with before calling this
// in a Button mousedown event or Pane close event for instance.
const soundWave = new SoundWave(50, "mic");
soundWave.on("ready", ()=>{
   Ticker.add(()=>{
      let data = soundWave.calculate();
      // data is an array with 50 frequency amplitudes from low to high based on Microphone input
   })
});

// or pass in a sound instance:

// before loading the sound with F.loadAssets() use the following:
// this forces CreateJS to use an <audio> tag format
// we are trying to get things to work with WebAudio and will remove this message when we do!
createjs.Sound.registerPlugins([createjs.HTMLAudioPlugin]);

// later when we the loading is complete and after interacting with app
const soundWave = new SoundWave(50, new Aud("mySound.mp3").play());

// or pass in an <audio> tag reference:
const soundWave = new SoundWave(50, zid("tagID"));
zid("tagID").play();

// see more examples at
// https://zimjs.com/soundwave/bars.html
// https://zimjs.com/soundwave/circles.html
// https://zimjs.com/soundwave/mouth.html

PARAMETERS supports DUO - parameters or single object with properties below num - (default 120) Number of data points returned by the calculate() method input - (default "mic") the input for the sound: A. the mic B. the result of a ZIM Synth play() or tone() C. the results of a new Aud("someSound").play() or asset("someSound").play() D. an <audio> tag reference zid("tagID") make sure to zid("tagID").play() include - (default 120/1024 = .117) a decimal range to include (0-1) - the full range (1) includes 90% very high frequencies smoothing - (default .85) a decimal range for smoothing with 0 being choppy and .9 being slow to respond, etc. min - (default -80 mic -100 song) minimum decibel number to pick up max - (default -40 mic -10 song) maximum decibel number to pick up operation - (default function below) a function that is applied to each result in the original bufferLength (1024) the natural results are very bass heavy with roughly a straight line heading down as frequency gets higher the default function reduces the bass by half and slowly rises towards the original values for higher frequency function(amplitude, i) { return amplitude * (.5+i*1/Math.pow(SoundWave.bufferLength, .95)); } you can pass in a different function to take the place of the default function the function receives the original amplitude and index as parameters you can use SoundWave.bufferLength to get the total number of values in the original data (1024) Note: the data returned by the calculate() method will be only the included range - eg. .117 of the total original values (starting at low frequency) baseline - (default 30) removes this amount of amplitude from each data point (after operation is applied) magnify - (default 5) multiplies the data point by this much (after the baseline is removed) by removing the baseline amount and multiplying what's left the difference in wave data is increased reduce - (default 0) subtracts this amount from each data point (after magnified) adjust - (default 5) seconds to adjusts the max value used for calculate(normalized) a maximum is found over this amount of time and used to normalize the rest of the frequencies setting this to 1 second would basically keep maximum output - but loses drop offs in sound channel - (default null) null will be both channels - set to 0 for left or 1 for right if 0 or 1 is set then will output only that channel as sound for both channels independently, use two SoundWave() objects one with channel:0 and one with channel:1 METHODS calculate(normalize) - returns an array of amplitudes at various frequencies from low to high the array will have a length that matches the num parameter the range of frequencies used will be 1024 multiplied by the include factor - eg. .117 = 120 this 120 will be divided by the num parameter and average results over the range will be used this means the num parameter must be less than the 1024 times the range otherwise there is a warning normalize (default true) gets frequency numbers between 0-1 - set to false to get general numbers this is controlled by the SoundWave adjust parameter which gets a maximum over time the frequencies are divided by the maximum setInput() - change the input to another sound dispose(context) - disposes the analyser. Disposes the audioContext too if context is true (default false) the new Ticker function used in the app will need to be removed - see new Ticker.remove() and any animated DisplayObject will need to be removed, etc. PROPERTIES type - holds the class name as a String num - read only num of frequency data input - get the current input of the SoundWave - see setInput() to set the input smoothing - a decimal range for smoothing with 0 being choppy and .9 being slow to respond, etc. analyser - the HTML analyser object https://developer.mozilla.org/en-US/docs/Web/API/AnalyserNode with minDecibels, maxDecibels, smoothingTimeConstant and some others - see link baseline - removes this amount of amplitude from each data point (after operation is applied) magnify - multiplies the data point by this much (after the baseline is removed) reduce - subtracts this amount from each data point (after magnified) adjust - change the seconds that SoundWave adjusts for normalization EVENTS dispatches a "ready" event when the sound source is connected and the calculate() method is ready CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

Synth(volume, frequency)

Synth zim class - extends a CreateJS EventDispatcher DESCRIPTION Synth has two main methods play() and tone(). PLAY Synth will play generated sounds based on seventeen inputs. The code library used is ZzFX from Frank Force at https://github.com/KilledByAPixel/ZzFX Thanks Frank, amazing library - nice and small too! Sounds can be created with the interface here: https://zzfx.3d2k.com Then just paste the resulting code into a ZIM Synth play() method. TONE https://zimjs.com/cat/synth.html Tone will play a tone at a given note forever or a duration of time. The tone() method returns a Tone object and additional notes can be added. The tone has effects: wah, tremelo (pitch / frequency) and vibrato (gain / volume) All the settings of the tone - volume, frequency and the effects properties can be animated with ZIM animate() and wiggle() - controlled with MotionController and any general interactivity on components like dials, sliders, steppers, selectors, etc. This uses the native JS Web Audio API to make oscillators with frequency and gain. The API is fairly complicated and cumbersome so this makes it easier. tone() plays a note "A", "Bb", "C#", "A4", etc. The low notes are "C0" then each number increase goes up an octavet to "G8". New constants are provided: SINE, SQUARE, TRIANGLE, SAW, ZAP for wave shapes. tone() also plays WaveTables - of 50 different sounds available on the ZIM CDN See https://zimjs.com/cat/synthpad.html NOTE as of ZIM 015 play() and tone() each have a pan parameter See https://zimjs.com/015/pan.html NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// play() example -
// ****** note, the app must be interacted with before sound can play
const synth = new Synth();
new Button({label:"START"}).center().tap(()=>{
   synth.play(0,...[,0,-1500,.3,.3,1.15,,1.01,2.37,-7.65,1100,.05,2,,-0.1,.07,5e-4]); // magical arrival
});
// This code came from here: https://zzfx.3d2k.com
// Note - it will have zzfx() and you want synth.play() - so copy what is in the brackets.
// **** but put a 0 for pan of 0 first
// zzfx(0,...[,0,-1500,.3,.3,1.15,,1.01,2.37,-7.65,1100,.05,2,,-0.1,.07,5e-4]);

// Note - above is ES6 - otherwise in ES5:
synth.play(0,null,0,-1500,.3,.3,1.15,null,1.01,2.37,-7.65,1100,.05,2,null,-0.1,.07,5e-4); // magical arrival

EXAMPLE

// play() example with event for complete
const synth = new Synth();
const circle = new Circle(50,blue).center().tap(function () {
   var synthSound = synth.play(0,...[,,229,.04,.04,.47,,.84,7.85,,,,,.2,,.05]);
   synthSound.on("complete", ()=>{
      circle.removeFrom();
      S.update();
   });
});

EXAMPLE

// tone() example:
// ****** note, the app must be interacted with before sound can play
const pane = new Pane("START").center();
pane.on("close", ()=>{
   const synth = new Synth();
   const tone = synth.tone(.5, "A"); // A is same as A3 (third octave up)
   timeout(1, ()=>{
      tone.addNote(.5, "A2");
   });
});

EXAMPLE

// tone() example:
// ****** note, the app must be interacted with before sound can play
const pane = new Pane("START").center();
pane.on("close", ()=>{
   const synth = new Synth();
   const tone = synth.tone({
      volume:1,
      note:"A1",
      shape:SQUARE,
      wahAmount:1000,
      wahRate:1,
      wahShape:SINE, // default
      wahThroat:5
   });
});

EXAMPLE

// ****** note, the app must be interacted with before sound can play
const pane = new Pane("START").center();
pane.on("close", ()=>{
   const synth = new Synth();
   const tone = synth.tone({
      volume:.7,
      note:"A2",
      shape:SQUARE,
      wahAmount:2000,
      wahRate:.2, // LFO
      wahThroat:10,

      vibratoAmount:10,
      vibratoRate:15,
      vibratoShape:SQUARE
   });
});

EXAMPLE

// ****** note, the app must be interacted with before sound can play
const pane = new Pane("START").center();
pane.on("close", ()=>{
   const synth = new Synth();
   const tone = synth.tone({
      volume:.2,
      shape:SINE,
      tremeloAmount:.2,
      tremeloRate:12,
      tremeloShape:SINE,
   })
   notes = series("C3", "C4", "C3", "C5");
   interval(.8, ()=>{
      tone.note = notes();
   }, null, true); // true - start interval right away
});

EXAMPLE

// ****** note, the app must be interacted with before sound can play
const synth = new Synth();
const circle = new Circle(100).center().tap(()=>{
   synth.tone({
      note:"C2",
      shape:SQUARE,
      wahAmount:3000,
      wahThroat:5,
      wahShape:ZAP,
      wahRate:.5,
      duration:2
   });
   circle.animate({scale:0}, 2, "backIn")
});

PARAMETERS (Synth) volume (default .3) - the default volume of sounds - will be overwritten by first parameter of play() or tone() frequency (default 220) - the default frequency (Hz) of sounds - will be overwritten by first parameter of play() or tone() METHODS (Synth) play(see parameters below) - plays a sound - see https://zzfx.3d2k.com to create data Returns a SynthSound object that dispatches a complete event when the sound is done The SynthSound has the following properties and methods: audioContext - the JS AudioContext gain - the JS WebAudio GainNode duration - the duration of the sound in seconds loop(num, offset) - see repeat below - same method. repeat(num, offset) - repeat the sound forever or pass in a num - returns object for chaining offset is a value to add to the duration so 2 would wait 2 seconds before repeating this accepts ZIM VEE so {min:-1, max:1} might overlap or delay slightly or series(1,2,3,4) would increase delay in repeating - see ZIM Pick() stop() - stop the sound play() - play the sound again - will need to call repeat() if desired Currently, there is no way to pause, pan or change volume once the sound is playing although if one really needed to change the volume, synthSound.gain.gain.value would do it - sigh (JS WebAudio...) PARAMETERS (play) ** all parameters support - |ZIM VEE| a zim Pick() object or Pick Literal can be passed ** Pick Literal formats: [1,3,2] - random; {min:10, max:20} - range; series(1,2,3) - order, function(){return result;} - function pan (default = 0) - The pan with 0 in middle, -1 at left, 1 at right and anything in between note: this is added before the zzfx() parameters often provided as ...[rest of parameters] volume (default = .3) - Volume scale (ratio) randomness (default = .05) - How much to randomize frequency (ratio Hz) frequency (default = 220) - Frequency of sound (Hz) attack (default = 0) - Attack time, how fast sound starts (seconds) sustain (default = 0) - Sustain time, how long sound holds (seconds) release (default = .1) - Release time, how fast sound fades out (seconds) shape (default = 0) - Shape of the sound wave 0-sine, 1-triangle, 2-sawtooth, 3-tan, 4-noise, 5-square (duty sweep) shapeCurve (default = 1) - Squarenes of wave (0=square, 1=normal, 2=pointy) slide (default = 0) - How much to slide frequency (kHz/s) deltaSlide (default = 0) - How much to change slide (kHz/s/s) pitchJump (default = 0) - Frequency of pitch jump (Hz) pitchJumpTime (default = 0) - Time of pitch jump (seconds) repeatTime (default = 0) - Resets some parameters periodically (seconds) noise (default = 0) - How much random noise to add (ratio) modulation (default = 0) - Frequency of modulation wave, negative flips phase (Hz) bitCrush (default = 0) - Resamples at a lower frequency in (samples*100) delay (default = 0) - Overlap with itself for reverb and flanger effects (seconds) sustainVolume (default = 1) - Volume level for sustain (ratio) decay (default = 0) - Decay time, how long to reach sustain after attack (seconds) tremelo (default = 0) - Trembling effect, rate controlled by repeat time (ratio) tone(see parameters below) - play a tone or tones continuously or for a duration returns a Synth Tone object - see methods and properties underneath parameters PARAMETERS (tone) ** supports DUO - parameters or single object with properties below ** supports VEE - all parameters support ZIM VEE - a zim Pick() object or Pick Literal can be passed ** Pick Literal formats: [1,3,2] - random; {min:10, max:20} - range; series(1,2,3) - order, function(){return result;} - function volume (default 1) - volume is all over the map with tones and effects Volume 1 is actually volume .1 as overall gain is dropped to 1/10 default JS Web Audio gain=1 The overally gain is run through a JS compressor - see compressor property and filters can be appied - see insertComponent() but - good luck! note (default "A" - Synth default frequency 220) - letter notes (string) or frequency notes (number) "C0" is the lowest note with each octave the next number up to "G8" being a very high note (ew) Middle notes do not need a number and are octave 3 so a "C" is the same as "C3". Sharps are with a "#" so "C#" or "C2#" or "C#2" or "#C" or "#C####" etc. order does not matter Flats are with a "b" (the lowercase letter b) so "Bb" or "Ab2", etc. shape (default SINE) - the wave form or type as a constant below - or a WaveTable JSON or custom shape constants: (each is the same as a lowercase string - eg. SINE is "sine") SINE - a sine wave for a smooth sound - not good with Wah effect SQUARE - an up and down wave -1/1 with a growly sound - good for wah! TRIANGLE - a triangle shaped wave between a SINE an SQAURE SAW (SAWTOOTH) - an increase and then sudden drop - a little jagged sounding ZAP (reverse SAW) - a loud noise followed by a slow drop to 0 repeating - pew pew WaveTable shapes - 50 custom sounds see https://zimjs.com/cat/waves.html if loading JSON from file pass in asset("wavename.json") to the shape param (not just the file name) CUSTOM - an object {real, imag} with real and imag properties the real and imag properties should be Float32Array objects but ZIM will convert arrays such as the arrays found in the WaveTables ZIM will run a createPeriodicWave() on the object and callsetPeriodicWave() https://developer.mozilla.org/en-US/docs/Web/API/PeriodicWave pan (default 0) - the pan from -1 (left) to 1 (right) with 0 in the middle duration (default 0) - forever - the seconds the sound will play (see also startTime) - and stop() method - also see ZIM TIME constant attack (default .02) - seconds to ramp up sound - sound that starts or stops right away pops (crackles) release (default .05) - seconds to ramp down sound at end WAH - makes a wah sound! Like a Wah Pedal... applies an LFO (low frequency oscillator) A wah is made with a bandpass filter - that reduces sounds at high and low frequencies The JS bandpass filter used is available as the filter property of the tone object Changing the middle frequency of the bandpass will move the range up and down We call the middle frequency the wahNote and it is the most fun to change! The range between the high and low frequency we call wahThroat (it is a Q value - quality) The range does not exactly cut off but rather compresses the sound - so a smaller throat sounds squeezed This also reduces the volume and can make the tone sound almost wet or like a resonance Note: other effects are done with JS Web Audio Oscillator Wah uses a ZIM Synth Oscillator As well as the parameters, setting any wah property (tone see properties) will turn on the wah and there is a stopWah() method wahAmount (default 1000) - how much (amplitude) the wah moves up and down across notes wahRate (default 1) - the oscillations per second the wah moves up and down across notes wahShape (default SINE) - the wave form (type) the oscillations take - SINE smooth, SQUARE bee boo bee boo + SAW, TRIANGLE, ZAP wahThroat (default 5) - the low to high range of the wah (Q) usually from .1 to 20 - will compress sound and reduce volume wahNote (default note) - the center note (frequency) of the wah - changing / animating this will make the most wah effect the farther away the wahNote is from the note the more wah but if the wah moves too much it can cut off the sound - try within -200 and 3000 ;-) VIBRATO - oscillates frequency (pitch) When vibrato is used, a JS Oscillator (vibrato property) is used to adjust a JS Gain (vibratoGain property) connected to the main note frequency to make a warble As well as the parameters, setting any vibrato property (tone see properties) will turn on the vibrato and there is a stopVibrato() method vibratoAmount (default 10) - the frequency range to warble vibratoRate (default 1) - the oscillations per second to change the frequency vibratoShape (default SINE) - the the wave form (type) the oscillations take - SINE smooth, SQUARE bap bap + SAW, TRIANGLE, ZAP TREMELO - oscillates gain (volume) When tremelo is used, a JS Oscillator (tremelo property) is used to adjust a JS Gain (tremeloGain property) to make a warble As well as the parameters, setting any tremelo property (tone see properties) will turn on the tremelo and there is a stopTremelo() method tremeloAmount (default the tone volume * hush) - matching volumes makes a balanced wobble adding volumes gets really loud so reduce volume when applying tremelo tremeloRate (default 1) - the oscillations per second to change the gain tremeloShape (default SINE) - the the wave form (type) the oscillations take - SINE smooth, SQUARE doop doop + SAW, TRIANGLE, ZAP startTime (default 0) - in seconds - times the note start time very accurately - also see ZIM TIME constant generally, sequencers should use startTime and run all the notes at the start then the start times will play the note this avoids inconsistencies in interval() and animate() But... it depends on the application pauseOnBlur (default false) - set to true to pause sound when window is reduced or another tab gains focus METHODS (Tone) ramp(volume, time) - set a volume with optional fade time there is a volume property but ramp() tends to avoid crackle and pop so would recommend using volume only for animating stop(releaseTime) - stop the tone and fade an optional releaseTime in seconds note: to stop a tone at a given time use the duration parameter (or a stop in a timeout) pause(state) - not really a pause but turns volume down and up state defaults to true for pause - set to false to unpause addNote(volume, note, shape, toWah, toVibrato, startTime) add a new note to the tone - returns a Note() object ** also see notes property of tone() for array of notes - and removeNote() below volume (default 1) - the volume of the note - 1 will be fine even if main volume is .1 for instance... note (default "A") - the letter note (or frequency) of the note shape (default SINE) - the type of wave - see tone() wave parameter for more details toWah (default true) - set to false to not add the note to the wah effect (if wah is on) toVibrato (default false) - set to true to add note to vibrato effect (if vibrato is turned on) adds note automatically to tremelo - to not add note to tremelo, make a new tone() PROPERTIES (Note) type - holds the class name as a String (Note) volume - ramp the gain of the gainNode attached to the Oscillator note - get or set the note - will ramp the Oscillator frequency oscillator - a reference to JS OscillatorNode used for note gain - reference to JS GainNode used for note removeNote(noteObject or toneObject) - remove a note object or pass in tone to remove that note removeWah() - removes the wah effect removeVibrato() - removes the vibrato effect removeTremelo() - removes the tremelo effect animate() - allows for tone to be animated like animate on a DisplayObject animate has added note convenience property - to convert to frequency from letter notes could animate with animate() function - but adding method makes it easier (and it is just a few lines) wiggle() - allows tone to be wiggled like a DisplayObject could wiggle with wiggle() function - but adding method makes it easier (and it is just a few lines) wire() - wire property values to another object. See wire() in Docs under DisplayMethods for parameters noWire() - turn off wire wired() - set tone to have property values set by another object. See wire() in Docs under DisplayMethods for parameters noWired() - turn off wired PROPERTIES (Tone) type - holds the class name as a String (Tone) volume - the main volume - use this for animation warning, use ramp(volume) for setting a one-time volume to avoid crackle note - ramps the tone to the provided note ("A", "Bb", "C1", "D#", etc.) - or frequency frequency - ramps main frequency (note) to given value (see also note) shape - Wave form SINE, SQUARE, TRIANGLE, SAW, ZAP - see parameters for details pan - the pan from -1 (left) to 1 (right) with 0 in the middle duration - get the duration of the tone if any (to set use duration parameter of Tone) currentTime - gets the current time in seconds since the start of the tone attack - seconds to ramp up volume or note release - seconds to ramp down volume or note hush - ratio of overall reduction of volume number - defaults to .1 so 10% JS gain=1 setting audioContext - reference to the JS Web Audio context being used - with the Web Audio nodes below WEB AUDIO NODES https://developer.mozilla.org/en-US/docs/Web/API/AudioNode The following are the JS Web Audio nodes used to create tone (for advanced users) Other Web Audio nodes can be inserted (patched) into the chain using disconnect() and connect() The connection order is: oscillator - filter - gain - compressor - audioContext.destination oscillator - reference to JS OscillatorNode created with audioContext.createOscillator() this can be directly manipulated but may want to use ZIM properties and methods filter - reference to JS BiQuadFilter of type "bandpass" made with audioContext.createBiquadFilter() gain - reference to JS GainNode made with audioContext.createGain() compressor - reference to JS DynamicsCompressor made with audioContext.createDynamicsCompressor() Compressor settings are as follows - these can be overridden: compressor.threshold.setValueAtTime(-50, audioContext.currentTime); compressor.knee.setValueAtTime(40, audioContext.currentTime); compressor.ratio.setValueAtTime(12, audioContext.currentTime); compressor.attack.setValueAtTime(0, audioContext.currentTime); compressor.release.setValueAtTime(0.25, audioContext.currentTime); notes - an array of notes including the main note (see addNote()) EFFECTS PROPERTIES setting these will start the effect if not already going see tone() parameters for definitions (aside from wahAdjust - below) wahAmount wahRate wahShape wahThroat wahNote wahAdjust - wahNote is adjusted up 200 hz - set to 0 to start exactly at main note vibratoAmount vibratoRate vibratoShape tremeloAmount tremeloRate tremeloShape oscillator(frequency, gain, shape, offset) - returns a ZIM Synth Oscillator object this gives an amplitude (plus offset) in time following the form (wave type) at the frequency used internally by wah effects as an offset was needed could not figure how to get JS Oscillator to offset frequency - or gain attache to oscillator see: https://stackoverflow.com/questions/61666671/how-do-you-offset-gain-attached-to-an-oscillator-using-javascript-web-audio PARAMETERS (Oscillator) frequency (default 1) - how fast in HZ the oscillator goes up and down on the wave gain (default 10) - the height of the wave (amplitude) - and negative gain to the lowest amount shape (default SINE) - the type of wave - SINE, SQUARE, TRIANGLE, SAW, ZAP (no custom) offset (default 0) - an amount added to the gain so 10 would make gain go from 10 to 20 (for gain of 10) PROPERTIES (Oscillator) all the parameters as properties - supports ZIM VEE type - holds the class name as a String (Oscillator) ticker - a reference to the ZIM new Ticker that runs the oscillator METHODS (Oscillator) pause(state) - pause or unpause the oscillator state defaults to true - set to false to unpause oscillator STATIC METHODS Synth.setShape(oscillator, shape) - sets a new wave on a JS OscillatorNode used internally by classes and methods with shape parameter oscillator - a JS OscillatorNode shape (default SINE) - the type of wave - see tone() shape parameter for details Synth.getNote (frequency, semitoneOffset) - provided by ZzFX to handle semitones returns a new frequency a number of semitones from the provided frequency frequency - the frequency in HZ - eg. 220 - middle A semitoneOffset - semitones (think consecutive piano keys) to offset the frequency Synth.note(note) - gets a frequency at a musical note used internally by classes and methods with note parameter Synth.wave(a,b) - prepares a WaveTable or wave data for Tone shape a - JSON object with WaveTable - if loading a file pass in asset("wave.json") b - if a and b are provided then assumes a custom object {real, imag} see tone() shape parameter for details Synth.drawWave(shape, color, thickness, backgroundColor, borderColor, borderWidth, corner, padding, paddingV) returns a ZIM Container holding a little picture of the wave type with an optional backing square shape (default SINE) the type of wave SINE, SQUARE, TRIANGLE, SAW, ZAP the rest of the parameters as expected has shape and backing properties - shape is a ZIM Shape and backing is a ZIM Rectangle also has a type property that matches the shape - SINE, SQUARE, etc. STATIC PROPERTIES Synth.notes = ["C",,"D",,"E","F",,"G",,"A",,"B"] - major notes skipping sharps and flats Synth.major = ["C","D","E","F","G","A","B","C4"] - major notes Synth.minor = ["C","D","Eb","F","G","Ab","B","C4"] - minor notes Synth.shapes = ["sine","square","triangle","sawtooth","saw","zap","tan","noise"] the last two are for ZzFX play() only which has no "saw" (only "sawtooth") and no "zap" PROPERTIES (Synth) volume - get or set the default volume - will be overwritten by first parameter of play() or tone() frequency - get or set the default frequency - will be overwritten by frequency parameter of play() or tone() (or note parameter of tone()) EVENTS (Synth) the result of the play() or tone() method will dispatch a "complete" event when the sound is done CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

VR(content, angle, distance, parallax, parallaxAngle, damp, parallaxDamp, startAngle, negativeParallax, borderMarkers, swiper, holder)

VR zim class - extends a ZIM Container which extends a CreateJS Container NOTE Also see the ZIM Three Helper Module for XR controllers, movement and teleport in three.js with ZIM TextureActive (this VR() class is not related) DESCRIPTION Copies the content and displays a left and right channel (side-by-side) to be viewed with a VR helmet. Content can be made to shift side to side as the head turns. Parallax is also an option. Works with Google Cardboard & Daydream, Samsung Gear VR, Carl Zeiss VR, Merge VR, View-Master VR And costing around $20-$30 these are fine: Utopia 360, VRIT VR, ETVR, etc. Provides a ZIM Swiper for testing on desktop to emulate turning the head. DETAILS Make a content Container (with registration point at 0,0) that holds all the content. Set a depth property on any children in the content container that you want to look 3D or use the chainable dep() method to apply the depth property. ZIM VR will copy the content and its depths into left and right containers and mask it. The content can be accessed via contentLeft and contentRight properties. The x values of the content that has depth properties set will be shifted according to the depth. This gives a sense of 3D coming out of the screen for positive depths and into the screen for negative depths. Device orientation can also be used to move the content as the head is turned and the headset and device moves. Currently the horizontal movement is built in as that is the trickiest with the 3D effect. Supply a motion angle (angle) and a motion distance (distance) about which the user will turn their head to see the content. Optional arrows are provided to map the boundaries of rotation and available as borderLeft and borderRight properties. You can manually apply vertical shift based on the ZIM Frame deviceOrientation event about the x axis Horizontal Parallax is provided if desired and will be based on the head rotation if no motion angle is provided or based on the distance of the object from the center of view if a motion angle is provided. You can set the parallax details as well like the magnitude, angle, damping, and negative parallax. Negative values of depth will not produce parallax unless negativeParallax is set to true (this looks funny). You can make your own vertical parallax if desired using ZIM Parallax and the deviceOrientation event about the x axis. NOTE moving content in the x direction should not be done manually. Rather, use the position() method of VR to properly place both channels and reset the vrStartX positions required. NOTE To add or remove content please use the register() and remove() methods. Any new content should be added to the initial content container. Do this first, then set the desired depths, then register the new content. This will clone the new content to the right side channel and set the shift in x based on depths for both channels. NOTE Any modifications afterwards to other properties like alpha, color, y, registration, etc. must be made manually to both channels - use the contentLeft and contentRight properties. The contentLeft is the original content (also available as the content property). You can use the vrMatch property of any content objects to get its other channel partner. So if you have a label variable for the Label in the original content, you can access the label in the right hand channel with label.vrMatch The right channel objects also have vrMatch properties so label.vrMatch.vrMatch is the label ;-) SEE: https://zimjs.com/vr/ NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// Prepare content inside one container
const content = new Container(W/2, H);

// This background tile has no depth or is at "screen" depth
// There will be no depth shift and no parallax
new Tile(new Rectangle(10,10,light), 20, 1, 10).center(content);

// These rectangles are given depth using the dep() method - or set the depth property
// The rectangles will be shifted in the x by VR
// centerReg the objects for proper parallax
const box = new Rectangle(50,50,green).centerReg(content).dep(10);
new Rectangle(70,70,clear,blue,5).centerReg(content).dep(12);

// 1. this just shows content in 3D with no motion:
// const vr = new VR(content).addTo(stage);

// 2. this will move when the head is turned (device is rotated) but with no parallax:
// const vr = new VR(content, 160, 400).center();

// 3. this shows parallax when the head is turned but with no positional movement:
// const vr = new VR(content, 0, 400, 2, 60).center();

// 4. this shows motion and parallax as the head is turned:
const vr = new VR(content, 160, 400, 2, 60).center();


// this will change the color of the box after it has been added to VR:
// box.color = pink; // the left side
// box.vrMatch.color = pink; // the right side

// this would fade in and out the outer rectangles:
// var obj = {obj:{alpha:0}, loop:true, rewind:true};
// vr.contentLeft.getChildAt(2).animate(obj);
// vr.contentRight.getChildAt(2).animate(obj);

// this would remove the outer rectangle:
// vr.remove(vr.content.getChildAt(2));

// this would remove the right hand border marker
// which shows when angle is != 0 and borderMarkers is set to true (default)
// vr.remove(vr.borderRight);

// this shows an inter-ocular adjuster when the stage is pressed
S.on("stagemousedown", ()=>{
   vr.showAdjuster();
});

// the above works fine, but really should remove the event when stage is pressed
// because all presses using the adjuster would be calling showAdjuster
// then add the event again when the adjuster is closed
// but ZIM makes sure that adjuster does not re-open if it is already open.
// Here is what that code would look like:

// var adjusterEvent = S.on("stagemousedown", ()=>{
//    vr.showAdjuster();
// }, null, true); // run once
// vr.on("close", function() {
//    adjusterEvent = S.on("stagemousedown", adjusterEvent);
// });

// this code turns the stage yellow if device is rotated beyond the angle parameter value
var adjusterEvent = vr.on("boundaryout", e=>{
   zog(e.boundary); // would be LEFT or RIGHT
   F.color = yellow;
});

// this code changes the stage color back to the original when rotated back in bounds of the angle parameter
vr.on("boundaryin", e=>{
   zog(e.boundary); // would be LEFT or RIGHT
   F.color = lighter;
});

// this would load stereoscopic images to the left and right content (no need to registser)
// F.loadAssets(["stairsRight.jpg", "stairsLeft.jpg"]);
// F.on("complete", ()=>{
//    new Pic("stairsLeft.jpg").center(vr.contentLeft);
//    new Pic("stairsRight.jpg").center(vr.contentRight);
// });

PARAMETERS supports DUO - parameters or single object with properties below content - a ZIM Container with registration point at the top left that holds the content The content will be placed in the left VR Channel (Container) and cloned to the right VR Channel (Container) Set the depth property (or use dep()) of any children (recursive) of the content to be viewed in 3D The higher the depth, the more it comes out of the screen which is at 0 depth A negative depth will go into the screen but will not have parallax (see negative parallax) The left and right content are available as contentLeft and contentRight properties of VR Each child of content has a vrMatch property that refers to itself in the other channel angle - (default 0) the angle in degrees the head can turn to see VR move (half to left, half to right) Currently, there is a small glitch in the transition at 360 degrees as damping rewinds and reverses position And there is no affordance for wrapping - so content at this location is not recommended A fix for this might be provided some time in the future distance - (default 100) the pixels the content will move over the angle (half to left, half to right) OR if there is no angle and there is parallax, the distance the parallax will move over the parallaxAngle parallax - (default 0) the percentage of the depth it will move for each degree of motion up to the parallaxAngle parallaxAngle - (default 60) the degree range that parallax will operate (half on one side and half on the other) damp - (default .5) the damping for motion if angle is provide - quicker than normal for more response turning parallaxDamp - (default .1) the damping for parallax - smaller number goes slower towards desired position startAngle - (default 0) the angle to start the viewing negativeParallax - (default false) set to true to make parallax work for negative depth (looks funny) boundaryMarkers - (default true) set to false to remove arrow markers at angle boundaries if angle is set swiper - (default false) set to true to use swiping if not on mobile device - for testing If on mobile, swiper is set to false so it does not conflict with the rotation of the device The swiper works from -330 to +330 and then stops Currently, there is no wrapping system so the limits prevent a glitchy transition holder - (default zimCurrentFrame stage) set to a Container with bounds set if desired - usually, the stage (default) METHODS register(item) - content is usually passed in initially to the content parameter of VR but an item (a display object) can be added at any time - to remove items, see remove(). Set the desired depth property for the item with 0 being the default for the screen depth. Add the item to content (contentLeft) with addTo(), center(), centerReg() before registering. Do not add the item to contentRight as register() will clone the new item and its children recursively to the right side VR Channel and set its depth and parallax. NOTE: to add stereoscopic images, one to the left chanel and one to the right channel, just add the images using addTo(), center() or centerReg() to contentLeft and contentRight - no need to register() returns the item remove(item) - removes item (and children) from the content of VR - do not manually remove from left and right channels returns the item position(item, x, y) - positions item in VR in both left and right channels - do no manually position left and right returns the item showAdjuster() - shows a panel to set interocular distance - this is saved across app loads The panel container can be accessed with adjuster property of VR The adjuster property has backing, label, strip, slider, close, zero and ok properties for formatting The adjuster sets the regX property of the content to shift the two channels to the desired distance appart Generally, this should be the distance between the eyes, but experimentation shows that a smaller distance works well This is provided primarily for tablet or desktop where the distance may be too big for the cross-eyed viewing technique returns the VR object hideAdjuster() - hides the adjuster - but the close and ok buttons will do this as well - also see VR events... returns the VR object resize() - call the resize() method to resize VR if the holder size changes - VR can be added to the ResizeManager returns the VR object PROPERTIES type - holds the class name as a String angle - read only - the angle provided to the VR parameters currentAngle - read only - the angle at which the device has been rotated since the start of the app content - the original content provided to the VR parameters contentLeft - the content - this shows in the left VR Channel The following read-only property is provided on all children of the content: vrMatch - a reference to the matching child in the other VR Channel The following read-only properties are provided to children of the content that have a depth property These are given for content passed in to the content parameter and also to items passed in to the register() mehtod: vrChannel - LEFT or RIGHT vrStartX - the starting x position before depth effect or parallax is added (could be changed if manually setting x position) vrParallaxDistance - the shift in x due to parallax vrParallaxDamp - the ZIM Damp object to handle parallax if VR angle is != 0 contentRight - the cloned content - this shows in the right VR Channel (also see contentLeft info) left - the container that holds the left VR Channel right - the container that holds the right VR Channel adjuster - the adjuster panel - see showAdjuster() method for details swiper - the ZIM Swiper if swiper parameter is set to true to test the motion if not on device boundaryLeft - the left boundary container if boundary parameter is true boundaryRight - the right boundary container if boundary parameter is true EVENTS boundaryout - dispatched when rotated past a boundary region - the event object provides a boundary property with LEFT or RIGHT values boundaryin - dispatched when rotated into the boundary region - the event object provides a boundary property with LEFT or RIGHT values saved - dispatch when OK button on adjuster panel is pressed to set the interocular distance closed - dispatches when X and OK button is pressed to close the adjuster panel CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

chop(obj, cols, rows, tile, margin, scale)

chop zim function DESCRIPTION Breaks up any DisplayObject into a grid of cols and rows and returns Tile or an array of Bitmap objects. Handy to pass to a Scrambler(). See https://zimjs.com/explore/chop.html See https://zimjs.com/cat/scrambler.html NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// A chopped Circle animating like pixels
chop(new Circle(200,red),20,20)
   .center()
   .noMouse()
   .animate({
      props:{alpha:0},
      time:{min:.1, max:.4},
      rewind:true,
      loop:true,
      sequence:.02
   });

EXAMPLE

// preload the pic in Frame() or F.loadAssets() assets parameter
new Scrambler(chop(new Pic("pic.jpg"),4,4)).center();

PARAMETERS obj - a ZIM DisplayObject like an asset() or Circle(), etc. cols - the number of cols to break object into rows - the number of rows to break object into tile - (default true) return a Tile - set to false to return an array of Bitmaps margin - (default 0) add a margin to image - will be outside bounds scale - (default 1) set the scale - will scale vectors as caching to preserve quality RETURNS a Tile or an array of Bitmaps depending on tile parameter CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

shuffle(array)

shuffle zim function DESCRIPTION Randomly shuffles elements of an array. Actually changes the original array (and also returns it). NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const array = ["happy", "sad", "spooked"];
const randomFromArray = shuffle(array)[0];
// this will be randomized each time it is run

EXAMPLE

const array = shuffle(["happy", "sad", "spooked"]);
for (let i=0; i<array.length, i++) zog(array[i]);
// this will get random and unique elements of the array

PARAMETERS array - the Array to shuffle - or pass in any number of parameters which will be turned into an array and shuffled different - (default false) set to true to make sure the resulting array is different in some way from the original note: make sure to pass in an array for the first parameter RETURNS the modified Array CLOSE ▲PAGE ▤CODE ▤BITS

CLOSE ▲

pluck(array, remove)

pluck zim function DESCRIPTION Returns a random element from an array. Same as array[Math.floor(Math.random()*array.length)]. Or if remove is true (default is false) then returns and removes random element from array. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const colors = [orange, green, red];
zog(pluck(colors)); // orange, green or red
const answer = pluck(colors, true); // if this were red, red would be removed from array

PARAMETERS array - an array of objects - or pass in any number of parameters to pick from remove - (default false) set to true to remove the selected item from the array (original array must be provided) RETURNS a random item from an array CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

rand(a, b, integer, negative)

rand zim function DESCRIPTION Returns a random integer between and including a and b if integer is true. Returns a random number (with decimals) including a and up to b but not b if integer is false. b is optional and if left out will default to 0 (includes 0). integer is a boolean and defaults to true. If a and b are 0 then just returns Math.random(). NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const speed = rand(10,20); // 10, 11, 12... 18, 19 or 20

const colors = [blue, yellow, green];
const color = colors[rand(colors.length-1)]; // note the length-1

// the equivalent of:
const color = colors[Math.floor(Math.random()*colors.length)];

// OR a technique often used without using rand():
const color = shuffle(colors)[0];

// here we get a speed that is either from 5 to 10 or -5 to -10
const speed = rand(5,10,null,true);

PARAMETERS a - the first Number for the range if a and b are not provided, rand() acts like Math.random() if parameter b is not provided, rand will use range 0 to and including a b - (default 0) second Number for the range it does not matter if a>b or a<b integer - (default true) set to false to include decimals in results if false, range will include decimals up to but not including the highest number if a or b have decimals this is set to false negative - (default false) includes the negative range as well as the positive RETURNS a Number CLOSE ▲PAGE ▤CODE ▤BITS

CLOSE ▲

seedRandom(seed)

seedRandom zim function DESCRIPTION Makes Math.random() work from a seed. If set then ZIM rand() and ZIM VEE values will also be seeded with its value. This means that rand() will repeat in order of its random results. This allows, for instance, a generative art piece to be the same for a certain user. Or lets a player replay a same random game level if the seedRandom() is set again with the same seed. Setting the seedRandom() with no parameter returns to regular rand(), Math.random(), etc. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

seedRandom("hello");
zog(rand(10,100)) // each time the app is run, this will be the same random number between 10 and 100
zog(rand(10,100)) // this will probably be a different random number than the first - but the same each time
zog(rand()) // and this will be the same random number between 0 and 1 not including 1.

EXAMPLE

// Remember the seed for a user with localStorage (like a cookie)
let seed = rand(100000000);
if (localStorage) {
   if (localStorage.seed) seed = localStorage.seed;
   else localStorage.seed = seed;
}
seedRandom(seed);
new Circle(100, [red, green, blue]).center();

// the user will always have the same random color
// unless no localStorage or localStorage is cleared

seedRandom(seed);
// below will make another circle the same color as the first
new Circle(100, [red, green, blue]).center().mov(0,300);

seedRandom(); // clears the seed
// below will be a random color each time
new Circle(100, [red, green, blue]).center().mov(200,300);

PARAMETERS seed - (default null) add any string or number to seed the Math.random() and subsequently, ZIM rand() and ZIM VEE values from [] and {min, max} passing in nothing or null will use/reset to regular Math.random() RETURNS the seed CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

odds(percent)

odds zim function DESCRIPTION Returns true if random percent is within (less than or equal to) the percent parameter provided. So, odds(20) would be if Math.random() <= .2 and odds(80) would be if Math.random() <= .8 and odds(50) would be half the time. NOTE odds(20) is the same as rand() <= .2 but just a little easier to remember and read. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

if (odds(20)) new Rectangle().center(); // 20% the time there will be a Rectangle

if (odds()) new Aud("yay.mp3").play(); // half the time play yay otherwise play boo
else new Aud("boo.mp3").play();

PARAMETERS percent - (default 50) odds() will return true if random percent is less than or equal to this percent RETURNS a Boolean CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

rarity(weights, shuffle, zimColors, dynamicPayload)

rarity zim function DESCRIPTION Receives an object with properties each having a number value as to their frequency. Returns an array with these properties multiplied by their frequency. The array is shuffled so get any element such as the first to pick randomly from the weighted array. Or pass in to any ZIM VEE value to pick in a weighted manner. Can also pass into a series() to pick them in order. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const colors = rarity({blue:50, green:40, yellow:10});
zog(colors[0]); // 50% chance blue, 40% chance green, 10% chance yellow

EXAMPLE

const radius = rarity({10:5, 20:2, 30:1});
// The properties are 10, 20 and 30.
// The frequencies are 5, 2 and 1.
// The frequency numbers do not need to add to 100
// These add to 8 - so there is a 5/8 chance the radius is 10
// and 2/8 chance it is 20 and 1/8 chance it is 30

// radius is an array such as [20,10,10,30,10,10,20,10]
// or some such scrambled array
// An array is a ZIM VEE value
// and the radius will be picked randomly from the array
new Circle(radius, red).center();

// instead, a series might be desired:
radius = series(radius);
// this would tile radii of 20,10,10,30,10,10,20,10
new Tile(new Circle(radius, red), 4,2).center()

EXAMPLE

STYLE = {color:rarity(red:99,black:1)}
loop(100, ()=>{
// probably 1 black circle - but very well could be more or less
new Circle(50).loc(rand(W), rand(H));
});

EXAMPLE

// payload array example to easily set scale
// remember that rarity is shuffled automatically so [0] is a random item
const size = rarity({Big:[1,5], Med:[10,1], Small:[1,.5]})[0];
// the first item of each array above is the frequency
// the second item of each array above is the payload
const circle = new Circle(100,red).center().sca(size.payload); // 5, 1 or .5
new Label(size + " Circle").center(circle); // matching "Big", "Med" or "Small"

// otherwise this is the alternative
const size = rarity({Big:1, Med:10, Small:1})[0];
const lookup = {Big:5, Med:1, Small:.5};
const circle = new Circle(100,red).center().sca(lookup[size]); // 5, 1 or .5
new Label(size + " Circle").center(circle); // matching "Big", "Med" or "Small"

EXAMPLE

// ZIM VEE
// the payload example with a range of scales for each size
// and picking randomly from a one of two sets of colors
const size = rarity({
   Big:[1,{min:4, max:6}], // ZIM VEE range
   Med:[10,{min:.5, max:1.5}],
   Small:[1,{min:.2, max:.4}]
})[0];
const color = rarity({
   Grey:[1,[grey,light,tin,silver,moon,fog]], // ZIM VEE random from array
   Colored:[20,[pink,purple,blue,red]]
})[0]; // either Grey or Colored
const circle = new Circle(100,color.payload) // will pick from payload array
   .center()
   .sca(size.payload); // a scale picked from range
new Label(color + " " + size + " Circle").center(circle);

EXAMPLE

// ZIM VEE without dynamicPayload (default)
const damage = rarity({large:[50,{min:20,max:30}], small:[50, {min:5,max:10}]})[0];
// imagine large is picked
zog(damage.payload) // imagine 25.5 is picked
zog(damage.payload) // so this will be 25.5
zog(damage.payload) // this will still be 25.5

// ZIM VEE with dynamicPayload parameter set to true
const damage = rarity({large:[50,{min:20,max:30}], small:[50, {min:5,max:10}]}, null, null, true)[0];
// imagine large is picked
zogr(damage.payload) // imagine 25.5 is picked
zogr(damage.payload) // this picks again - so it could be 22.4
zogg(damage.payload) // and this could be 29.0

damage.dynamicPayload = false; // turn off picking
zogg(damage.payload) // this will be 29.0
zogg(damage.payload) // this will be 29.0

damage.dynamicPayload = true; // back to picking
zogr(damage.payload) // this could be 21.3
zogr(damage.payload) // this could be 28.8

PARAMETERS weights - (default null) an object literal with options (property name) and frequencies (property value) or the property value can be an array with [frequency, payload] (see further down) eg. {green:70, blue:20, red:10} or {10:2, 20:2, 30:1} The frequencies should be whole numbers The frequencies can add to 100 to easily visualize percentage but they can add up to any number and this will be used to calculate the pick ratio for each one using frequency/total frequency For instance with {10:2, 20:2, 30:1} the frequencies add up to 5 so the the chances of being picked are 2/5 for 10, 2/5 for 20 and 1/5 for 30 If an array with [frequency, payload] is provided then the frequency is used as the frequency the payload is any object that will be added as a payload property to the option string (the option is converted from a primative string to a String object so it can hold the payload) This arrangement replaces the need for a look-up table (see examples) | ZIM VEE | The payload can be any object but will also be processed by ZIM VEE (Pick) So if an array or object literal is desired use {noPick:[]} or {noPick:{}} Also see dynamicPayload parameter ZIM VEE literal types are: [1,3,2] - random; {min:10, max:20} - range; series(1,2,3) - order, function(){return result;} - function shuffle - (default true) shuffle the resulting array zimColors - (default true) set to false to not convert "blue" property value to ZIM blue dynamicPayload - (default false) only pick once from ZIM VEE value in payload or set to true to continue to pick from ZIM VEE value in payload each time property is accessed note: at any time after rarity() is called, this can be set to true or false RETURNS an array of properties repeated according to frequency these properties may have a payload property if payloads are used CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

repeats(array, total)

repeats zim function DESCRIPTION Returns the number of repeats in an array. By default, this will be the max number of repeats - not the total repeats. The number of repeats often offers a rarity feature. NOTE this does not determine the repeated value - this is not needed for rarity. NOTE a repeat is one less than the number of objects that are the same. So if no objects are the same the repeats are 0. If two objects are the same the repeats are 1. If three objects are the same the repeats are 2, etc. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const colors = [orange, green, red, orange, orange, green];
zog(repeats(colors)); // 2 - note, one less than the number of objects that repeat
zog(repeats(colors, false)) // 3 - two repeats with orange, one repeat with green

PARAMETERS array - an array of objects total - (default false) set to true to return the total repeats RETURNS the max number of repeats in an array or 0 if no objects are the same, one if two objects are the same, etc. if total is true then returns all the repeats - possibly from different sets CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

series(array|item1|obj, item2, item3)

series zim function DESCRIPTION Returns a function that will return each value passed as a parameter (or an Array) in order or an object literal with min and max. This goes in sequence each time the function is called. Use this to pass a series in to any ZIM VEE value so a looping series is obtained. NOTE was called makeSeries() which is now depricated NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// note - do not call the variable name series
const colors = series(red, green, blue);
colors(); // red
colors(); // green
colors(); // blue
colors(); // red, etc.

// or
const colors = [red, green, blue];
const s = series(colors);
s(); // red
s(); // green
s(); // blue
s(); // red, etc.

new Tile(new Rectangle(10,10,[blue, red]), 10, 10).center(); // would randomize colors
new Tile(new Rectangle(10,10,series(blue, red)), 10, 10).center(); // would alternate colors

EXAMPLE

STYLE = {color:series(pink, green, blue)}
loop(9, i=>{
   new Circle(100).loc(110+i*100, 400)
});

EXAMPLE

// ten rectangles getting higher by 20 each time
const s = series({min:10, max:200}).step(20);
loop(10, i=>{
   new Rectangle(10, s, red).sca(1,-1).loc(100+i*20, 400);
});

EXAMPLE

// added functionality as of ZIM 10.9.0
// start at index 3, reverse and don't go past 0
const nums = series(0, 1, 2, 3, 4).jump(3).reverse().constrain();
loop(5, ()=>{
   zogb(nums()); // 3,2,1,0,0 (blue in console)
});
nums.reverse(false); // go forward - note, still starting at index 0
zogg(nums()); // 0 (green in console)
zogg(nums()); // 1
zogg(nums()); // 2
nums.bounce(); // go back and forth rather than default loop
loop(5, ()=>{
   zogy(nums()); // 3,4,3,2,1 (yellow in console)
});
nums.step(3); // sitting at 0 then increase the step to 3
loop(5, ()=>{
   zogr(nums()); // 0,3,2,1,4 (red in console)
   // 3->6 bounces off 4 with two back to 2
   // 2->-1 bounces off 0 with one forward to 1
   // tricky but correct
});
zogp(nums.index); // 1 - coming back 3 steps from 4 to 1 as current index

EXAMPLE

// make a checkerboard
const colors = series(black,white,black,white,black,white,black,white).flip();
const board = new Tile(new Rectangle(80,80,colors),8,8,1,1).center();

PARAMETERS array|item1|{min,max,step} - the first item - or an array of results that will be called in order as the resulting function is called or an object with min, max and step properties to make a series of numbers from and including min and max (step defaults to 0) this will make an array of values and then it is just like an array was entered initially. when used with ZIM VEE - the values may be further ZIM VEE values (including more series values) item2 - the second item if the first is not an array item3 - the third item, etc. to as many items as needed METHODS step(num) - num defaults to 1 - the number of items to move the index - or use index property every(num) - num defaults to 0 - steps to wait before moving to the next index - remain on blue for five, then go to yellow for five, etc. jump(index) - jump to an index but do not run it - the next call to the series will run here reverse(boolean) - boolean defaults to true - reverses direction - or pass in false to cancel reverse bounce(boolean) - boolean defaults to true - back and forth between 0 and length-1 - or pass in false to cancel bounce flip(boolean) - boolean defaults to true - go to the end then go in reverse - will do last one and first one twice - or pass false to cancel flip constrain(boolean) - boolean defaults to true - keeps index between 0 and length-1 - or pass in false to cancel constrain random(boolean) - boolean defaults to true - randomizes order of series each time it finishes - or pass in false to cancel random mix(boolean) - boolean defaults to true - randomizes order of series but avoids duplicating on ends - or pass in false to cancel mix shuffle(boolean) - boolean defaults to true - shuffles order of series but then will repeat with same order - or pass in false to cancel shuffle PROPERTIES type - a string of the type of object in this case, "series" array - an array of items passed in to the function length - the length of the series index - get or set the current index of the series - what will run next original - a copy of the original order RETURNS a function that can be called many times - each time returning the next value in the series CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

loop(obj, call, reverse, interval, step, start, end, immediate, complete, completeParams)

loop zim function DESCRIPTION 1. If you pass in a Number for obj then loop() does function call that many times and passes function call the currentIndex, totalLoops, startIndex, endIndex, obj. By default, the index starts at 0 and counts up to one less than the number. So this is like: for (let i=0; i<obj; i++) {} There are step, start and end index parameters - start cannot be negative 2. If you pass in an Array then loop() loops through the array and passes the function call the element in the array, currentIndex, totalLoops, startIndex, endIndex and the array. So this is like: for (let i=0; i<obj; i++) {element = array[i];} 3. If you pass in an Object literal or ZIM Dictionary then loop() loops through the object and passes the function call the property name, value, currentIndex, totalLoops, startIndex, endIndex, obj So this is like: for (let i in obj) {property = i; value = obj[i];} Note: a Dictionary uses a copy of its objects and values to provide name and value this is because setting Dictionary values while looping will change the order of the arrays while looping 4. If you pass in an String then loop() loops through the letters and passes the function call the letter, currentIndex, totalLoops, startIndex, endIndex, obj. So this is like: for (let i=0; i<obj.length; i++) {letter = obj[i];} 5. If you pass an HTML NodeList or HTMLCollection then loop() loops and gives each tag in the NodeList or HTMLCollection see ZIM zet() for an example of getting a NodeList (like the $() in JQuery) 6. If you pass in a Container then loop() loops through all the children of the container and does the function for each one passing the child, currentIndex, totalLoops, startIndex, endIndex, obj. So this is like for(let i=0; i<obj; i++) {let child = obj.getChildAt(i);} or for (let i in container.children) {let child = container.children[i];} ** the ZIM loop method can also be used for looping through a Container as follows: container.loop(item=>{}); // see loop under the Methods Module. NOTE If you pass in true for reverse, the loop is run backwards counting to 0 (by default) NOTE use return to act like a continue in a loop and go to the next loop NOTE use return NEXT when in interval mode to go immediately to the next interval - as opposed to return which goes to next but after another interval NOTE return a value to return out of the loop completely like a break (and return a result if desired) NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const container = new Container().alp(.1).addTo();
loop(1000, i=>{ // gets passed an index i, totalLoops 1000, startIndex 0, endIndex 999, obj 1000
   // make 1000 rectangles
   new Rectangle().loc(rand(W-100), rand(H-100), container);
});

// to continue or break from loop have the function return the string "continue" or "break"
loop(10, i=>{
   if (i%2==0) return; // skip even
   if (i>6) return "break"; // quit loop when > 6
   zog(i);
});

loop(10, i=>{
   zog(i); // 9-0 in console
}, true);

loop(10, i=>{
   zog(i); // 5-9
}, null, 1, 5)

// the start parameter cannot be less than 0
// to get negative values for i subtract a desired value inside the loop

const colors = [green, yellow, pink];
loop(colors, (color, index, start, end, array)=>{ // do not have to collect all these
   zog(color); // each color
});

const array = [0,0,0,1,0,0,0];
const pass = loop(array, val=>{
   if (val!=0) return false;
});
// below will log failed
if (pass) zog("passed"); // by default loop returns true (as of ZIM 10.6.1)
else zog("failed"); // false inside loop gets assigned to pass

const person = {name:"Dan Zen", occupation:"Inventor", location:"Dundas"}
const result = loop(person, (prop, val, index, total, start, end, object)=>{ // do not have to collect all these
   zog(prop, val); // each key value pair
   if (val == "criminal") return "criminal"; // this would return out of the loop to the containing function
});
if (result == "criminal") alert("oh no!");

const tags = zet(".heading").tags; // get an NodeList of tags styled with heading class
loop(tags, (tag, i)=>{
   tag.innerHTML = i + ". " + tag.innerHTML; // add an index number in front
});

EXAMPLE

// LOOP THROUGH A CONTAINER

// LOOP FUNCTION
loop(container, child => { // gets passed the child, index, total, start, end and obj
   child.alp(rand(.2, .9)); // set each child to a random alpha
});

// LOOP METHOD
container.loop(child => { // gets passed the child, index, total, start, end and obj
   child.alp(rand(.2, .9)); // set each child to a random alpha
});

// backwards through a Container when removing
container.loop(child => {
   if (odds(20)) child.removeFrom();
}, true); // true would reverse - important if removing children in loop

EXAMPLE

// looping with the interval setting

// loop through an array every 1 second
loop(10, i=>{zog(i);}, null, 1);

// loop through a Container every .01 seconds
const tile = new Tile(new Rectangle(26,26,[green, blue, pink]), 10, 10, -1, -1)
   .reg(CENTER)
   .pos(0,100,CENTER,BOTTOM)
   .loop(item=>{
      item.color = darker;
      S.update();
   }, null, .01);

PARAMETERS supports DUO - parameters or single object with properties below obj - a Number of times to loop or an Array or Object, String, NodeList or Container to loop through for looping through a Container also note the loop method: container.loop((child)=>{}); call - the function to call the function will receive (as its final parameters) the index, total, start, end, obj, intervalObj (if interval is set) where the index is the current index, total is how many times the loop will run start is the start index, end is the end index and obj is the object passed to the loop the starting parameters vary depending on the type of obj: if the obj is a number then the first parameter is the index (no extra starting parameters given) if the obj is an array then the first parameter is the element at the current index if the obj is an object literal then the first and second parameters are the property name and property value at the current index if the obj is an string then the first parameter is the letter if the obj is an HTMLCollection then the first parameter is the tag if the obj is a Container then the first paramter is the child reverse - (default false) set to true to run the loop backwards to 0 interval - (default 0) set to a number of seconds between each loop use return NEXT to go immediately to the next interval use return to just leave current interval then wait another interval to continue return a value (other than NEXT) to exit the loop and clear the inverval the interval object is provided at the end of the loop function parameters - but will probably not be needed step - (default 1) each step will increase by this amount (positive whole number - use reverse to go backwards) start - (default 0 or length-1 for reverse) index to start end - (default length-1 or 0 for reverse) index to end immediate - (default true) set to false to not start the loop right away, but rather wait for a first interval complete (default null) - a callback function to call when complete completeParams (default null) - paramater to pass complete callback RETURNS any value returned from the loop - or true if no value is returned from a loop CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

getTIME(time, timeType, minWarning, maxWarning, noWarning)

getTIME global function Checks for TIME and timeUnit Used internally by interval, timeout, animate and others returns the time unit as "s" or "m" ~~~~~~~~~~~~~~ checkTIME = function(time, timeChar, minWarning, maxWarning) checkTIME globalFunction Tests to see if time is in expected units - timeChar is "s" or "m" for seconds or milliseconds logs a warning if ((timeChar="s" && time>minWarning) || (timeChar=="m" && time<maxWarning)) Set TIMECHECK = false to turn off check if desired - for instance if getting false positives CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

timeout(time, call, pauseOnBlur, timeUnit)

timeout zim function DESCRIPTION Calls a function after the time delay - like window.setTimeout() This calls ZIM interval() with a total of 1. NOTE as of ZIM Cat time is in seconds not milliseconds. Set TIME = "milliseconds"; to set all ZIM time to milliseconds or pass in "milliseconds" to the timeUnit parameter for a specific override. NOTE setTimeout has the time parameter last, timeout has it first so that it is consistent with loop() and the CreateJS on() method NOTE to clear a timeout you use returnID.clear() - different than window.clearTimeout(returnID) NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

timeout(1, ()=>{
   circle.x += 100;
   S.update();
});
// moves the circle 100 pixels after one second

// GAME to press button within one second:
const id = timeout(1, ()=>{
   zog("you lose!");
   button.enabled = false;
});
const button = new Button().center();
button.on("click", ()=>{
   zog("you win!");
   id.clear();
});

CLOSE ▲

interval(time, call, total, immediate, pauseOnBlur, timeUnit, complete, completeParams)

interval zim function DESCRIPTION Calls a function after each time delay - like window.setInterval(). Can pass in an Array of two times to set random time delays each interval. Can pass in how many times you want to run the function and whether it runs right away. NOTE as of ZIM Cat time is in seconds not milliseconds. Set TIME = "milliseconds"; to set all ZIM time to milliseconds or pass in "milliseconds" to the timeUnit parameter for a specific override. NOTE setInterval has the time parameter last, interval has it first so that it is consistent with loop() and the CreateJS on() method NOTE to clear a interval you use intervalObj.clear() - different than window.clearInterval(returnID) NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

interval(1, ()=>{
   circle.x += 100;
   S.update();
});
// every second the circle will move 100 pixels
// if you want smooth movement, use:

Ticker.add(()=>{
   circle.x += 100; // no need for S.update()
});

interval(1, obj=>{
   zog("counting " + obj.count); // starts counting at 1
   if (obj.count == 10) obj.clear(); // will now log 1 to 10
});
// OR better:
interval(1, obj=>{
   zog("counting " + obj.count); // starts counting at 1
}, 10); // now will log 1 - 10 with total parameter set to 10

// IMMEDIATE:
interval(1, obj=>{
   zog("counting " + obj.count); // starts counting at 0
}, 10, true); // now will log 0 - 9 with immediate parameter set to true

// EXTERNAL control:
const inter = interval(1, ()=>{
   zog("counting " + inter.count); // starts counting at 1
});
const button = new Button({label:"STOP", toggle:"START"}).center();
button.on("click", ()=>{inter.pause(button.toggled);});

// RANDOM intervals with ZIM Pick() literals
interval({min:.2, max:.8}, dropBombs); // bombs will fall at different rates between 200ms and 800ms
interval([1, 2], dropBombs); // bombs will fall at either 1 or 2 s
let count = 1;
function increase() {return ++count}
interval(increase, dropBombs); // bombs will fall at 1 second, then again after 2 more seconds and 3 seconds more after that, etc.

CLOSE ▲

async(url, callback, callbackString, maxTime, maxCancel)

async zim function DESCRIPTION A way to send data back and forth to a server script without reloading the HTML page. (like AJAX but without the bother) Uses a dynamic script call with an optional callback (cross domain calls are okay) also known as JSON-P pattern but JSON is unnecessary - note, no JSON in two of the examples below. Pass a url to the server script (ie. php or node page) and an optional callback function that you define in your code (cannot be an anonymous function). async will automatically add a random number to the end of your script call to defeat cache. NOTE async uses GET so data is limited to GET length (as of ZIM 10 - this is 2K to 8K depending on Browser) If more data is required, use an AJAX library NOTE async uses an r CGI key to send a random number to defeat cache. Do not send an r property SEE: https://codepen.io/danzen/pen/gNKQYY for a full example NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// existing JSONp service:
// assuming that we have a callback function called test as shown below
async("https://ip-api.com/json?callback=async.test",test);
function test(data) {zog(data.country);}
// note that the callback we pass the service is async.test not just test
// this allows zim to handle scope issues and garbage collect the dynamic script when done

EXAMPLE

// existing JSON service:
// if the service just returns JSON - then pass through a JSONp wrapper:
const api = "https://zimjs.com/codepen/ranker.php"; // not JSONp - just JSON
async("https://zimjs.org/cdn/jsonp.php?api="+api+"&callback=async.getData", getData);
function getData(data) {
   zog(data); // data will be the JSON parsed object
}
// Here is the jsonp.php code if you would like to host:

<?php
$api = $_GET["api"];
if (!preg_match('/^http/i', $api)) exit;
$callback = $_GET["callback"];
header('Content-Type: application/javascript');
$data = file_get_contents($api);
echo $callback."(".$data.")";
?>

EXAMPLE

// CLIENT - your own server script:
// assuming we have a callback function called myFunction as shown below
async("https://yourserver.com/script.php?id=72&name=dan", myFunction);
function myFunction(data){
   zog(data.test); // wow - assuming you have the PHP file below (JSON is automatically parsed)
   zog(data.score[1]); // 2   
}

// SERVER - your script must output the following format as a string:
// "async.myFunction(somedata)"

// in the php file we would use the following to return JSON:
<?php
header('Content-type: text/javascript');
$data = [test=>"wow", score=>[1,2,3]];
echo "async.myFunction(".JSON_encode($data).")";
?>

// or to just echo a string:
<?php
header('Content-type: text/javascript');
echo "async.myFunction('success')"; // your data parameter in myFunction would be "success"
?>

// to return an object literal with nodejs express for example, you would use:
res.send('async.myFunction({list:[1,2,3], name:"whatever"})');
// the data parameter in the myFunction function defined earlier would be an object literal
// we could then do zog(data.list[0]) to log the value 1, etc.

PARAMETERS url - url to the server script (ie. php or node page) Note: async uses an r CGI key to send a random number to defeat cache - do not send an r property callback - (default null) callback function that you define in your code (cannot be an anonymous function) callbackString - (default null) a string name matching the function in case the file is minified maxTime - (default 2 seconds) how long to wait for server response before triggering an error may still trigger callback if callback comes later unless maxCancel is set to true see also ZIM TIME constant If maxTime is up without calling back the function async will return two arguments to the callback function: "asyncError" and either "timeout" or "cancelled" maxCancel - (default false) set to true to have maxTime cancel a late callback response calling the return function on async does two things: 1. it handles scope issues so we can find your callback function 2. it handles garbage collection to remove the dynamic script tag that was used if you do not specify a callback function then just send "" back from your server script NOTE we have experienced duplicate script calls if nothing is sent back NOTE if more than one async() with the same named call function is run at the same time then a queue of callbacks is created if the data comes back in a different order, the wrong call could be called if there is danger of this happening (rare) then use ZIM Ajax RETURNS undefined CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

couple(json)

couple zim function DESCRIPTION Turns a nested JSON object into a single layer JSON object The object will have _ between the id and the property name eg. {"circle":{"x":"10", "y":"20"},"count":{"value":"0"}} is: {"circle_x":"10", "circle_y":"20", "count_value":"0"} This allows data to be JSON decoded on the server and put more directly into table fields of the database See also ZIM decouple() NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// note the two levels of nesting - this is the format of ZIM Bind data for instance
const test = JSON.stringify({circle:{x:10, y:20},count:{value:0}});
zog(couple(test)); // {"circle_x":"10", "circle_y":"20", "count_value":"0"}

PARAMETERS json - a JSON string in the nested form of: {"obj1":{"prop1":"val", "prop2":"val"},"obj2":{"prop3":"val"}} RETURNS a JSON string with one less level of objects in form of: {"obj1_prop1":"val", "obj1_prop2":"val", "obj2_prop3":"val"} CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

decouple(json)

decouple zim function DESCRIPTION Turns a flat coupled JSON object into a nested layer JSON object The object will remove _ from between the id and the property name eg. {"circle_x":"10", "circle_y":"20", "count_value":"0"} is: {"circle":{"x":"10", "y":"20"},"count":{"value":"0"}} This allows data from table fields of the database to be more easily dealt with as objects with their own properties See also ZIM couple() NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// note the two levels of nesting - this is the format of ZIM Bind data for instance
const test = {circle:{x:10, y:20},count:{value:0}};
const test2 = JSON.stringify(test);
const test3 = couple(test);
// {"circle_x":"10", "circle_y":"20", "count_value":"0"}
// send this to server to store in fields

// receive back similar coupled data from fields
// decouple the data:
const test4 = decouple(test3);
// {"circle":{"x":"10", "y":"20"},"count":{"value":"0"}}
const test5 = JSON.parse(test4); // similar object to test!
// {circle:{x:10, y:20},count:{value:0}};

PARAMETERS json - a JSON string in the coupled form of {"obj1_prop1":"val", "obj1_prop2":"val", "obj2_prop3":"val"} RETURNS a JSON string with one less level of objects in the form of: {"obj1":{"prop1":"val", "prop2":"val"},"obj2":{"prop3":"val"}} the original JSON string will be returned if the initial JSON string is not coupled CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

convertColor(color, toColorType, alpha)

convertColor zim function DESCRIPTION Converts color to HEX - for example: "#333333" Converts color to HEX NUMBER - for example: 0x333333 Or converts color to HTML string - for example: "red" Or converts color to RGB - for example: "rgb(0,0,0)" Or converts color to RGBA - for example: "rgba(0,0,0,.5)" Or converts color to hsl array - for example: [degrees, percent, percent] NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

let color;
color = convertColor("red"); // result is "#ff0000"
color = convertColor("rgb(255,0,0)")); // result is "#ff0000"
color = convertColor("rgb(0,0,255)", "string"); // result is "blue"
color = convertColor("rgb(0,0,20)", "string"); // result is "#000014" - no matching string color
color = convertColor("#ff0000", "string"); // result is "red"
color = convertColor("f00", "string"); // result is "red" - note missing # okay and can use three digits
color = convertColor(blue, "rgba", .5); // result is "rgba(80,196,183,0.5)"
color = convertColor("rgb(256,256,0)", "rgba", .3); // result is "rgba(256,256,0,.3)"
color = convertColor("rgba(0,0,0,.2)", "rgba", .5); // result is "rgba(0,0,0,.5)"
color = convertColor("rgba(0,0,0,.2)", "hex", .5); // result adds alpha to hex "#00000080"
color = convertColor("red", "hexNumber"); // result is 0xff0000
color = convertColor("rgba(0,0,0,.2)", "array"); // result is [0,0,0,.2]
color = convertColor(blue, "hsl"); // result is [173.28,49.57,54.12] // first is angle then two percentages
color = convertColor(0x00FF00); // result is "#00FF00";

PARAMETERS color - (default black) the HTML string or HEX color (case insensitive) or HEX number starting with 0x HEX can be a # followed by 6, 3, 8 or 4 characters (3 or 4 characters will be duplicated to 6 or 8) toColorType - (default "hex") or use "string", "rgb", "rgba", "array", "hsl" (different than "hsv") "zim", "hexNumber" if "string" and color does not match existing HTML string color then will return HEX number as string zim will convert zim rgb to zim string like "blue" hexNumber is the color.parseInt(16) - similar to 0x format array will give [r,g,b,a] as array hsl will give [degree, percent, percent] - note, hsv and hsl are similar but only the hue is the same alpha - (default 1) the alpha used for the "rgba" and "hex" toColorType for hex color type, the hex number is an 8 character result (after the #) RETURNS a String with the converted color CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

colorRange(color1, color2, ratio)

colorRange zim function DESCRIPTION Gets the color in a range between two colors based on a ratio from 0-1 Used internally by setColorRange() method and colorRange property of ZIM shapes including animating color from current color to a new color NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

zog(colorRange(green, blue, .5)); // #7ecb7c
const rect = new Rectangle(100,100,red).center().setColorRange(purple);
rect.colorRange = .1; // will change color to #f1455e (closer to red than purple)
rect.animate({color:purple}, 1); // will animate color to purple in one second
rect.wiggle("colorRange", .5, .2, .5, 1, 5); // wiggles the color in the range

PARAMETERS ** supports VEE - parameters marked with ZIM VEE mean a zim Pick() object or Pick Literal can be passed Pick Literal formats: [1,3,2] - random; {min:10, max:20} - range; series(1,2,3) - order, function(){return result;} - function color1 - |ZIM VEE| (default null) the first color as an HTML string or hex color (case insensitive) color2 - |ZIM VEE| (default black) the second color as an HTML string or hex color (case insensitive) ratio - (default .5) the ratio where 0 is the first color and 1 the second color RETURNS a hex color string CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

lighten(color, ratio)

lighten zim function DESCRIPTION Lightens the color by a ratio from 0 to 1 A shortcut for ZIM colorRange(color, white, ratio); A shortcut method is also added to the JavaScript String for instance: red.lighten(.2); // lightens ZIM red color "red".lighten(.2); // lightens HTML red color "#cc0000".lighten(.2); // lightens HTML Hex color NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// make a slightly lighter than ZIM blue circle
new Circle(100, lighten(blue, .2)).center();

// or use the String method directly
new Circle(100, blue.lighten(.2)).center();

PARAMETERS color - the color as an HTML string or hex color (case insensitive) can be ZIM colors as they are just references to hex colors not used with color String method ratio - (default .5) the ratio where 0 is the color and 1 white RETURNS a hex color string CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

darken(color, ratio)

darken zim function DESCRIPTION Darkens the color by a ratio from 0 to 1 A shortcut for ZIM colorRange(color, black, ratio); A shortcut method is also added to the JavaScript String for instance: red.darken(.2); // darkens ZIM red color "red".darken(.2); // darkens HTML red color "#cc0000".darken(.2); // darkens HTML Hex color NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// make a slightly darker than ZIM blue circle
new Circle(100, darken(blue, .2)).center();

// or use the String method directly
new Circle(100, blue.darken(.2)).center();

PARAMETERS color - the color as an HTML string or hex color (case insensitive) can be ZIM colors as they are just references to hex colors not used with color String method ratio - (default .5) the ratio where 0 is the color and 1 black RETURNS a hex color string CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

toColor(color, targetColor, ratio)

toColor zim function DESCRIPTION toColor the color by a ratio from 0 to 1 A shortcut for ZIM colorRange(color, white, ratio); A shortcut method is also added to the JavaScript String for instance: red.toColor(blue, .2); // moves ZIM red color towards ZIM blue color "red".toColor("blue", .2); // moves HTML red color towards HTML blue color "#cc0000".toColor("#0000cc", .2); // moves HTML Hex red color towards HTML Hex blue color NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// make a ZIM blue circle be partway to ZIM pink
new Circle(100, toColor(blue, pink, .2)).center();

// or use the String method directly
new Circle(100, blue.toColor(pink, .2)).center();

PARAMETERS color - the color as an HTML string or hex color (case insensitive) can be ZIM colors as they are just references to hex colors not used with toColor String method targetColor - the target color as an HTML string or hex color (case insensitive) can be ZIM colors as they are just references to hex colors ratio - (default .5) the ratio where 0 is the color and 1 targetColor RETURNS a hex color string CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

toAlpha(color, alpha)

toAlpha zim function DESCRIPTION Set the alpha of a the color by a ratio from 0 to 1 A shortcut for ZIM convertColor(color, "rgba", ratio); A shortcut method is also added to the JavaScript String for instance: red.toAlpha(.2); // sets ZIM red color to .2 alpha "red".toAlpha(.2); // sets HTML red color to .2 alpha "#cc0000".toAlpha(.2); // sets HTML Hex red color to .2 alpha NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// make a ZIM blue circle be partway to ZIM pink
new Label({text:"HELLO", backgroundColor:blue.toAlpha(.5)}).pos(0,50,CENTER,BOTTOM);

PARAMETERS color - the color as an HTML string or hex color (case insensitive) can be ZIM colors as they are just references to hex colors not used with toAlpha String method ratio - (default .5) the ratio where 0 is the color and 1 targetColor RETURNS a hex color string CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

toBW(hex)

toBW zim function DESCRIPTION Returns either black or white depending on which will have better contrast on the provided hex color If the color is not hex then use ZIM convertColor() first. Thanks - Mark Ransom on GitHub NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const invertedColor = invertColor(red);
const swatch = new Rectangle(300, 200, invertedColor).center();
new Label(invertedColor, 50, null, toBW(invertedColor)).center(swatch);
// the toBW() chooses black or white which ever will have highest contrast on color

PARAMETERS color - a hex color - use ZIM convertColor() if not a hex color RETURNS either "#000000" or "#ffffff" depending on which has more contrast against the provided color CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

invertColor(hex)

invertColor zim function DESCRIPTION Inverts a color (converts to RGB and subtracts the color from black) Used in ZIM "invert" theme. Thanks - Onur Yildirim on GitHub NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const invertedColor = invertColor(red);
const swatch = new Rectangle(300, 200, invertedColor).center();
new Label(invertedColor, 50, null, toBW(invertedColor)).center(swatch);
// the toBW() chooses black or white which ever will have highest contrast on color

PARAMETERS color - a hex color - use ZIM convertColor() if not a hex color RETURNS a hex color string of inverted color CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

zimEase(points, polynomials, convert, reverse, lockEnds)

zimEase zim function DESCRIPTION Easing is used in animation usually to slow down or speed up as the animation starts or ends. ZIM animate() has built in eases that handle the common types of easing - so look there first! https://zimjs.org/spells.html?item=animate under the ease parameter. The zimEase() function provides for custom easing beyond the built in eases and returns an easing function to pass in to ZIM animate() - or CreateJS TweenJS The points to pass in to zimEase() can be created at https://zimjs.com/ease At the top of the app there are default easing functions but just use the built in easing function for most of these such as "quadOut", etc. SEE: https://zimjs.com/ease for the zimEase tool NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// go to https://zimjs.com/ease use the sliders and TEST the motion
// then press SAVE and copy the zimEase() code into ZIM animate()
// this example makes very big forward, back, forward motion
new Circle().loc(200,200).animate({
   props:{x:400},
   ease:zimEase([2.5,-0.5,-1,1]),
   time:1.5
});

EXAMPLE

// passing an array of two arrays will play the first for the first half
// and the second for the second half
// so here we pass an array of two arrays for a snapInOut effect
// this is cool so it is now a set of eases: "snapIn", "snapOut", "snapInOut" - cheers GreenSock!
new Circle().loc(200,200).animate({
   props:{x:400},
   ease:zimEase([[1.45,-0.57,0.67,0.55], [0.34,0.44,1.43,-0.31]]),
   // ease:"snapInOut", // or use the new ZIM ease
   time:2
});

PARAMETERS points - (default [.2,.4,.6,.8]) an array of 4 points to feed the equation - or an array of two arrays use the tool at https://zimjs.com/ease and press SAVE to get these the two ends are anchored at 0 and 1 and are the input to the quintic Bezier formula If an array of two arrays is provided the first array is used for the first half of the tween (In) and the second array is used for the second half of the tween (Out) polynomials - (default null) an array of 5 points that are the results of the quintic Bezier formula linear would be [0,0,0,0,1] - use this if you are given the polynomials - who knows! otherwise see points. mirror - (default false) will duplicate the ease equation and reverse the second copy all within the provided time reverse - (default false) reverses the ease equation (does not work with mirror) lockEnds - (default true) this snaps the start and end to the real values - set to false to draw curve based on data, for instance. PROPERTIES ** The function result is an object that holds the easing equation in a noPick property ** this allows it to bypass the dynamic setting of ZIM VEE ease parameter. ** Also in this object are the additional properties points - the array of points or the array of arrays of points polynomials - the array of final values or an array of arrays of final values RETURNS an easing function for ZIM animate() or CreateJS TweenJS CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

spline(points, tension, close, shape, removeLast)

spline zim function DESCRIPTION Makes a curve along given points. Pass in a ZIM Shape and spline will draw the curve. Or pass return value into a ZIM Squiggle or Blob as the points parameter for an interactive curve or path for animation. For a Blob, set the close parameter to true. Thanks https://github.com/georgedoescode NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const shape = new Shape().addTo().s(red).ss(3);
spline([[10,10],[50,20],[30,200],[230,100]], 1, true, shape);

EXAMPLE

const points = spline([[10,10],[50,20],[30,200],[230,100]], 1, true);
new Blob({
   borderColor:purple,
   borderWidth:2,
   controlType:"mirror", // otherwise default is free
   points:points
}).center();

PARAMETERS points - an array of {x,y} or [x,y] points to draw a curve through tension - (default 1) the smoothness of the curve with 0 being angulars close - (default false) set to true to close the curve shape - (default null) pass in an optional shape to draw the curve in must set the s(), ss() or f() before passing in the shape removeLast - (default close) for ZIM Blob and Squiggle this removes the duplicate last point only for the return values - will not affect a shape version RETURNS an SVG path that can be passed into Squiggle or Blob CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

getPointAtPercent(x1, y1, x2, y2, percent)

getPointAtPercent zim function DESCRIPTION Gets a new Point along the straight line from x1,y1 to x2,y2 at a percentage of the length NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// A ZIM line() is not needed but here we place a circle 30% along the length of the line
const line = new Line(500).rot(45).center();
new Circle(20,red).loc(getPointAtPercent(line.startX, line.startY, line.endX, line.endY, 30));

PARAMETERS x1 - (default 0) - the start x of the line y1 - (default 0) - the start y of the line x2 - (default 0) - the end x of the line y2 - (default 0) - the end y of the line percent - (default 50) - the percentage along the line straight for the return point RETURNS an ZIM Point() with x an y at the percentage along the straight line CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

pointAlongCurve(points, ratio, getAngle)

pointAlongCurve zim function DESCRIPTION Finds a point along a cubic Bezier curve - such as that used in Blob and Squiggle as well as the Shape.graphics.bezierCurveTo() or tiny api bt() Used internally for animating along Blob and Bezier curves NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// point1, control1, control2, point2
const points = [{x:100,y:100}, {x:200,y:100}, {x:200,y:100}, {x:200,y:200}]
const shape = new Shape().addTo();
shape.graphics
   .s("black").ss(2)
   .mt(points[0].x,points[0].y)
   .bt(points[1].x,points[1].y, points[2].x,points[2].y, points[3].x,points[3].y);
new Circle(10,red).loc(pointAlongCurve(points, .2));

PARAMETERS points - an array of point objects (or objects with an x and y property) for a cubic Bezier - point1, control1, control2, point2 ratio - (default .5) the ratio where 0 is at the first point and 1 is at the second point getAngle - (default false) request a calculated angle of tangent at point even - (default false) use modified cubic equation for even spacing for percentages even is used by Beads but not by placing a point along a path RETURNS a point object with x and y properties on the curve at the ratio as well as an angle property for the tangent if getAngle is true CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

distanceAlongCurve(points)

distanceAlongCurve zim function DESCRIPTION Finds approximate distance along a cubic Bezier curve - such as that used in Blob and Squiggle as well as the Shape.graphics.bezierCurveTo() or tiny api bt() Used internally for animating along Blob and Bezier curves NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// point1, control1, control2, point2
const points = [{x:100,y:100}, {x:200,y:100}, {x:200,y:100}, {x:200,y:200}]
const shape = new Shape();
shape.graphics
   .s("black").ss(2)
   .mt(points[0].x,points[0].y)
   .bt(points[1].x,points[1].y, points[2].x,points[2].y, points[3].x,points[3].y);
zog(distanceAlongCurve(points)); // 170.7

PARAMETERS points - an array of point objects (or objects with an x and y property) for a cubic Bezier - point1, control1, control2, point2 RETURNS an approximate distance along the curve CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

closestPointAlongCurve(point, segmentPoints, num, interpolate, percentage)

closestPointAlongCurve zim function DESCRIPTION Finds the closest point along a cubic Bezier curve before the given point. Blob and Squiggle use cubic Bezier as does the Shape.graphics.bezierCurveTo() or tiny api bt() Used internally for adding points to a Blob and Bezier curves NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const blob = new Blob().center();
const points = blob.segmentPoints;
S.on("stagemousedown", ()=>{
   const point = blob.globalToLocal(F.mouseX, F.mouseY)
   zog(closestPointAlongCurve({x:point.x, y:point.y}, points))
   // gives index of point on curve before mouse location
});

PARAMETERS point - an object with an x and y property this could be {x:100, y:140} or circle, etc. the results tell which segment to add the point to the segment starting with the returned index segmentPoints - an array of cubic Bezier point data each being an array of points for a cubic Bezier in the format of [point1, control1, control2, point2] Note, this is not the same as Blob or Squiggle points but rather use the segmentPoints property of Blob and Squiggle num - (default 10) the number of points per segment used to calculate answer interpolate - (default false) will return closest test point - not index of closest existing point percentage - (default false) will return percent (0-100) the nearest point is on the path (overrides interpolate) RETURNS the index of the closest point in segmentPoints before the given point or if interpolate is true, will return the closest testPoint (use higher num for better result) or if percentage is true, will return percent (0-100) the nearest point is on the path (overrides interpolate) CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

transformPoints(points, transformType, amount, x, y)

transformPoints zim function DESCRIPTION Scales, rotates, or moves points about provided x and y - or 0, 0 if x and y are not provided Used internally by Squiggle and Blob transformPoints method NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// from https://zimjs.com/paths/
const points = [[0,75,0,0,-150,150,150,-150],[300,75,0,0,0,0,0,0,"none"]];
const newPoints = transformPoints(points, "scale", 2);
// [[0,150,0,0,-300,300,300,-300],[600,150,0,0,0,0,0,0,"none"]]

EXAMPLE

// or used with Squiggle:
const points = [[0,75,0,0,-150,150,150,-150],[300,75,0,0,0,0,0,0,"none"]];
const squiggle = new Squiggle({points:points}).transformPoints("scale", 2).center();
// a squiggle with points twice as big as before

PARAMETERS points - an array of points in the Squiggle and Blob format (controlType is left as is) [[controlX, controlY, circleX, circleY, rect1X, rect1Y, rect2X, rect2Y, controlType], [etc]] transformType - String any of: "scale", "scaleX", "scaleY", "rotation", "x", "y" amount - the amount to transform x, y - (default 0, 0) the x and y position to transform about RETURNS an array of points with numbers transformed CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

trimEndPoints(points)

trimEndPoints zim function DESCRIPTION Take outside Bezier rectangles off end points of Squiggle Modifies the points but then will have to make Squiggle from modified points Used internally, but might want to create a Squiggle from half the points or every other point this function would make sure ends are clean. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const s = new Squiggle();
const p = copy(s.points).slice(1); // take off the first point
s.points = trimEndPoints(p);
s.center(); // a Squiggle with the first point gone

PARAMETERS points - an array of points in the Squiggle format RETURNS an array of points with with the first point having no left control and the last point having no right control CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

reversePoints(points)

reversePoints zim function DESCRIPTION Reverses Squiggle formatted points NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const s = new Squiggle();
const p = reversePoints(s.points);
const path = new Squiggle({points:p, interactive:false}).center();
new Circle(20,red).addTo().animate({path:path}, 10); // will go right to left
// also see reversePoints() on Squiggle and Blob

PARAMETERS points - an array of points in the Squiggle format to reverse RETURNS an array of points that is in reverse order to the input points CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

appendPoints(original, points, controlType)

appendPoints zim function DESCRIPTION Adds a set of Squiggle points to after an original set of Squiggle points The joining point is merged with the provided optional controlType ** appendPoints() expects the first point on points (the second parameter) to be at the last point of the original (the first parameter) NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const s = new Squiggle(); // not added
// appendPoints expects the first point on points (the second parameter)
// to be at the last point of the original (the first parameter)
const s2 = appendPoints(s.points, [s.points[s.points.length-1], [350,50]]);
// an array with an extra points added at the end - the joining point is merged
new Squiggle({points:s2}).center();

PARAMETERS original - an array of points in the Squiggle format points - an array of points in the Squiggle format to add to the end of the original controlType - (default "straight") one of four String values as follows: none - there are no control rectangles (they are actually set at 0,0). This makes a corner at the circle point. mirror - the control rectangles reflect one another about the point circle - lengths are kept even straight - the control rectangles keep a straight line through the point circle but length is independent free - the control rectangle moves independently from the other control rectangle RETURNS the original array of points with the points added to the end CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

prependPoints(original, points, controlType)

prependPoints zim function DESCRIPTION Adds a set of Squiggle points to before an original set of Squiggle points The joining point is merged with the provided optional controlType ** prependPoints() expects the last point on points (the second parameter) to be at the first point of the original (the first parameter) NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const s = new Squiggle(); // not added
// prependPoints expects the last point on points (the second parameter)
// to be at the first point of the original (the first parameter)
const s2 = prependPoints(s.points, [[-50,50], s.points[0]]);
// an array with an extra points added to the start - the joining point is merged
new Squiggle({points:s2}).center();

PARAMETERS original - an array of points in the Squiggle format points - an array of points in the Squiggle format to add to the start of the original controlType - (default "straight") one of four String values as follows: none - there are no control rectangles (they are actually set at 0,0). This makes a corner at the circle point. mirror - the control rectangles reflect one another about the point circle - lengths are kept even straight - the control rectangles keep a straight line through the point circle but length is independent free - the control rectangle moves independently from the other control rectangle RETURNS the original array of points with the points added to the beginning CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

splitPoints(points, index, trimEnds)

splitPoints zim function DESCRIPTION Splits Squiggle points into two sets of Squiggle points Also used by Squiggle splitPoints() and Blob makeSquiggle() NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const s = new Squiggle();
const split = splitPoints(s.points, 2); // two arrays of three points each
// also see Squiggle.splitPoints(2) // which splits squiggle into two squiggles

PARAMETERS points - an array of points in the Squiggle format index - (default floor of half points length) the index at which to split the points into two sets the first set gets the index trimEnds - (default false) take ending Bezier sticks off split ends RETURNS an array if the first and second set of points CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

outlineImage(image, reverse)

outlineImage zim function DESCRIPTION Returns points [[x,y],[x,y]...] around an image - the image should be transparent. Uses the Marching Squares technique adapted by @sakri. The image can be any ZIM DisplayObject most likely a Pic() It should have one solid shape as opposed to separate blobs. NOTE will return thousands of points so will want to use ZIM simplifyPoints() before sending points to a ZIM Blob() for instance NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

import zim from "https://zimjs.org/cdn/017/zim_physics"; // or latest version
new Frame(FIT, 1024, 768, light, dark, ready, "cathead.png", "https://zimjs.org/assets/");
function ready() {
   const pic = new Pic("cathead.png").center();
   const physics = new Physics().drag();

   const blob = new Blob({
      points:simplifyPoints(outlineImage(pic)),
      color:faint,
      interactive:false
   }).loc(pic).addPhysics();
   pic.addTo(blob);

   zog(physics.validate(blob)); // check validation

   new Circle(50,black).pos(0,100,CENTER).addPhysics();
}

PARAMETERS image - a DisplayObject with transparency sunch as a Pic() of a png the image should have one single solid area RETURNS an array [[x,y], [x,y]...] points (probably thousands) outlining the solid area most likely use the ZIM simplifyPoints() function to reduce these greatly CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

simplifyPoints(points, tolerance, highestQuality, reverse, removeLast)

simplifyPoints zim function DESCRIPTION Takes in an array of points [[x,y],[x,y]...] and simplifies them to less points based on a tolerance This is the performant simplify-js library by Vladimir Agafonkin https://mourner.github.io/simplify-js/ Use this with the ZIM outlineImage() function to reduce points NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

import zim from "https://zimjs.org/cdn/017/zim_physics"; // or latest version
new Frame(FIT, 1024, 768, light, dark, ready, "cathead.png", "https://zimjs.org/assets/");
function ready() {
   const pic = new Pic("cathead.png").center();
   const physics = new Physics().drag();

   const blob = new Blob({
      points:simplifyPoints(outlineImage(pic), 10), // 10 is the default tolerance
      color:faint,
      interactive:false
   }).loc(pic).addPhysics();
   pic.addTo(blob);

   zog(physics.validate(blob)); // check validation

   new Circle(50,black).pos(0,100,CENTER).addPhysics();
}

PARAMETERS points - an array of points in [[x,y],[x,y]...] format - possibly from ZIM outlineImage() tolerance - (default 10) the amount of simplification (in pixels) highestQuality - (default false) highest quality simplification but runs ~10-20 times slower removeLast - (default true) removes last point which is like first point and can lead to overlap physics issues RETURNS an array [[x,y],[x,y]...] simplified x and y points these points can be passed into a ZIM Blob() to make a shape CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

makeID(type, length, letterCase)

makeID zim function DESCRIPTION makes a random letter, number or mixed id of specified length NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const id1 = makeID(); // five random letters and numbers (starts with letter)
const id2 = makeID("strings"); // five random uppercase letters
const id3 = makeID("numbers", 10); // ten random numbers
const id4 = makeID(["Z", "I", "M", 1, 2, 3, 4, 5, "-"], 5); // random five characters from array (possibly repeating)

PARAMETERS type - (default "mixed") set to "letters" or "numbers" as well note: no O, 0, 1, I or L due to identification problems pass in an array of characters to make an id from only those characters length - (default 5) the length of the id letterCase - (default uppercase) - set to "lowercase" or "mixed" as well RETURNS a String id (even if type is number) CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

makeSyllable(length, firstVowel)

makeSyllable zim function DESCRIPTION makes a syllable from random consonants and vowels in alternating order. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

zog(makeSyllable()); // "aru" or "bal", etc.

EXAMPLE

let word = "";
loop(3, ()=>{
   word += makeSyllable();
});
zog(word); // a three syllable word

PARAMETERS length - (default 3) the length of letters in the syllable firstVowel - (default true 30%) set to true for the first letter being a vowel set to consonant for a consonant - null will choose a vowel 30% of the time RETURNS a String syllable of the length CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

makePrimitive(obj)

makePrimitive zim function DESCRIPTION Convert any new String(), new Number(), new Boolean() values to string, number and boolean primitives. Recursively handles arrays and object literals. All other objects left the same. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

let o = new String("Dan Zen");
o = makePrimitive(o); // o is now "Dan Zen"
// this is the same as o = String(o);

EXAMPLE

let o = {age:new Number(7), name:new String("Dan Zen")};
o = makePrimitive(s); // o is now {age:7, name:"Dan Zen"}

EXAMPLE

let o = [new Number(7), new String("Dan Zen")];
o = makePrimitive(s); // o is now [7, "Dan Zen"];
// also works with combinations of arrays and object literals

PARAMETERS obj - the object to convert RETURNS the object with String, Number and Boolean objects converted to primitives CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

makeMath()

makeMath zim function DESCRIPTION Adds all Math static methods to window as global variables There are not as many as we might think... 43 at the time of writing this NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

makeMath();
zog(sin(20*RAD));

CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

swapProperties(property, objA, objB)

swapProperties zim function DESCRIPTION Pass in a property as a string and two object references and this function will swap the property values. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// exchanges the x position of two ZIM circles
swapProperties("x", circle1, circle2); S.update();

PARAMETERS property - a String of the property to swap values eg. "alpha" objA, objB - the objects on which to swap properties RETURNS Boolean indicating success CLOSE ▲PAGE ▤CODE ▤BITS

CLOSE ▲

setProps(obj, props)

setProps zim function DESCRIPTION Sets the props of an object literal {} on the provided object or array Each value can be a ZIM VEE value - see docs for ZIM Pick() Thanks Pettis Brandon and Joseph Diefenbach for the thoughts on this NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const c = new Circle().addTo();
setProps(c, {x:100, y:200});  // can also use CreateJS set() method for this

// Set props for each object in array
const a = [new Circle().loc(100,100), new Rectangle().loc(300,100)];
setProps(a, {color:red, borderColor:blue}); // cannot use CreateJS set() method for this

// Use the setProps() method of a Tile - just calls the setProps() function
// The method is available on Tile, Wrapper, LabelLetters, LabelWords, LabelOnPath, LabelOnArc, etc.
new Tile().center().setProps(color:[red, orange, yellow])

PARAMETERS obj - an object or an array of objects props - an object literal {} of properties and values to set on the object or objects in an array the value can be ZIM VEE values - see docs for ZIM Pick() CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

mobile(orientation)

mobile zim function NOTE for making mobile apps - see https://zimjs.com/mobile.html and the PWA entry in Docs https://zimjs.org/spells.html?item=PWA NOTE as of ZIM version ZIM 01, a global variable M is provided if the Frame is run that just stores the result of mobile(). mobile() was needed for each Button... so made it global DESCRIPTION Detects if app is on a mobile device - if so, returns the mobile device type: android, ios, blackberry, windows, other (all which evaluate to true) else returns false. orientation defaults to true and if there is window.orientation then it assumes mobile BUT this may return true for some desktop and laptop touch screens so you can turn the orientation check off by setting orientation to false. If orientation is set to false the check may miss non-mainstream devices The check looks at the navigator.userAgent for the following regular expression: /ip(hone|od|ad)|android|blackberry|nokia|opera mini|mobile|phone|nexus|webos/i Microsoft mobile gets detected by nokia, mobile or phone. NOTE See also the ZIM MOBILE constant - this can be set to true or false to override mobile() (but not the M global) NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

if (mobile()) {
   const pane = new Pane("Desktop Only");
   pane.show();
}

// alternatively, for ZIM version ZIM 01 and on:
if (M) {
   const pane = new Pane("Desktop Only");
   pane.show();
}

PARAMETERS orientation - (default true) uses window.orientation property to determine mobile this may call certain touch screens mobile but setting to false uses a test on mobile names which could be incomplete RETURNS a String or false CLOSE ▲PAGE ▤CODE ▤BITS

CLOSE ▲

vee(obj)

vee zim function DESCRIPTION Determines if obj is a ZIM Pick() object or a Pick Literal - used by ZIM VEE parameters Pick Literal format is [], {min:a, max:b}, function(){}, {noPick:x} or a function(){} See https://zimjs.org/spells.html?type=Pick ZIM Pick is a way to pass in dynamic parameters or style properties This is very handy to pass in a series() function or an array for random pickings, etc. Used to create dynamic particles with the Emitter or tile specific items in order, etc. Pick.choose() accepts any value and if not in ZIM Pick format, will just return the object NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const color = [red, green, blue];
// ternary operator - if in Pick format, add "random" else ""
new Label((vee(color)?"random ":"") + "colors").center();

PARAMETERS obj - an object to pass in to test whether it is in ZIM VEE (Pick) format RETURNS a Boolean true if Pick format or false if not (such as just a number, string, new Circle, etc.) CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

extend(subclass, superclass, override, prefix, prototype)

extend zim function - modified CreateJS extend and promote utility methods DESCRIPTION For ES5 - place after a sub class to extend a super class. Extending a super class means that the sub class receives all the properties and methods of the super class. For example, a ZIM Container() extends a CreateJS Container and then adds more methods and properties but all the CreateJS Container methods and properties are still there too like x, y, addChild(), etc. For ES6 - do not use zim.extend() but rather use the built in ES6 structures as follows: EXAMPLE

// ES6 - do NOT use zim.extend()
class Person() {
   constructor () {
      zog("I am a person");
   }
}
class Woman extends Person { // use JS6 extends keyword
   constructor () {
      super(); // use JS6 super() to call the Person constructor - will do the zog()
      // Woman code
   }
}

// ES6 to extend a zim Container for example (do NOT use zim.extend() in ES6)
class ChineseCoin extends Container { // use JS6 extends keyword
   constructor () {
      super(); // must call the zim Container before using keyword this
      new Circle(100, "gold").addTo(this); // this will be the zim Container
      new Rectangle(100, 100, "brown").center(this);
   }
}
var coin = new ChineseCoin().center(); // coin is a zim Container with Circle and Rectangle inside

NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// ES5 examples using functions to make classes
// ES5 has no extends keyword and no super keyword so we use zim.extends()
function Person() {
   this.talk = function() {
      zog("I am a person");
   }
}
function Woman() {
   this.super_constructor(); // part of the zim.extend() system
}
extend(Woman, Person); // here is the zim.extend() for ES5
var woman = new Woman();
woman.talk();

NOTE CreateJS display objects require their constructor to be called otherwise it is like quantum entanglement (seriously) extend() adds access to the super class constructor so it can be called in the subclass as follows: this.super_constructor(); It also provides access to super class methods that are overridden NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// ES5 example - see the ES6 set of examples for ES6 ;-)
// make a Collection class that will extend a Container
// the Collection class will call the Container constructor
// and override the the ZIM Container center method in the class body
// and override the CreateJS Container addChild method in the prototype
// either method would work in either place - it is often a matter of preference
// but you might need to use a method in the class body to access local variables
// The ZIM extend() method parameter values need to change depending on where you override
// see the comments inline for the instructions

var Collection = function() {
   // for CreateJS the super constructor must be run
   this.super_constructor();

   // override the zim center() method
   // methods in the function call that override must be passed in as an array of strings
   // to the override parameter of extend() to be able to access the super_method
   this.center = function(where) {
      this.super_center(where);
      this.y -= 50;
   }
}
// override the super class addChild() that comes from the CreateJS Container
// methods on the prototype that override are automatically provided a super_method
// unless the prototype parameter of extend() is set to false (default is true)
Collection.prototype.addChild = function(c) {
   this.super_addChild(c); // call the super class addChild
   zog("added a child to Collection");
}

// make the Collection extend a Container()
// it will receive all the properties and methods of the Container plus its own
extend(Collection, Container, CENTER); // or pass an array of overridden methods

// use the Collection
var c = new Collection();
c.addChild(new Rectangle(100, 100, green)); // zogs "added a child to Collection"
c.center(); // centers the collection but then offsets it 50 pixels up

NOTE the superclass constructor is always available as this.prefix_constructor() no matter the override or prototype settings NOTE this.prefix_constructor(); should be called at the top of the subclass to avoid problems when multiple copies of object NOTE to extend a class that already extends a ZIM class then change the prefix to a unique name: EXAMPLE

// if we already had the Collection example above and we want to extend that
// then we must use a new prefix when using extend()

var Records = function() {
   this.Collection_constructor();
}
extend(Records, Collection, null, "Collection");

// you will still have this.super_center(), this.super_addChild() if needed
// plus any newly overridden methods available as this.Collection_methodName() etc.
var r = new Records();
r.addChild(new Circle(20, pink));
r.super_center(); // call the original center (without vertical shift)

// to extend again, use yet another prefix - for example: "Records"
var Jazz = function() {
   this.Records_constructor();
}
extend(Jazz, Records, null, "Records");

PARAMETERS supports DUO - parameters or single object with properties below NOTE do NOT use zim.extend() with ES6 - see ES6 examples at top instead subclass - the class to extend superclass - the class to extend from (an existing class) override - (default null) an Array of methods (as Strings) to override. You can override any function by just defining that function in the subclass the override parameter gives you access to the overridden function in the superclass prototype only methods on the superclass prototype can be accessed once overridden - not methods in the superclass body if there is only one method being overridden then a single string is fine ("test" or ["test"] is fine) any methods passed to this parameter will be given prefix_methodName() access on the sub class (this.prefix_methodName()) where the prefix is below (note, the prototype setting has no bearing on these manual overrides) this list is only needed for methods in the subclass body methods assigned to the prototype of the subclass that override are automatically given prefixes prefix - (default "super") a prefix that will be followed by "_" and then the overridden method name by default this.super_constructor() would call the super class constructor if prefix is set to "Person" then this.Person_constructor() would call the super class constructor the same system is used to call overridden files in override or prototype prototype - (default true) will search the subclass prototype for overriding methods the overridden methods are then available as this.prefix_methodName() set to false to avoid searching the super class for methods overridden by the sub class prototype just quickens the code minutely if there is no need NOTE extend() is included in Distill if DISPLAY, METHODS or FRAME Module classes are used (otherwise NOT included) RETURNS the subclass CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

copy(obj, clone, cloneContainers)

copy zim function DESCRIPTION Copies arrays and basic objects: modified https://stackoverflow.com/users/35881/a-levy If you have var obj = {prop:"val"}; and then try and copy obj to obj2 like so: obj2 = obj; then obj2 and obj refer to the same object. This means that after obj.prop = "new"; both obj.prop and obj2.prop would be "new". copy(obj) returns a new object so both will work independently and after obj.prop = "new"; obj2.prop would still be "val". NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const obj = {hair:blue, cars:["audi", "honda"]};
const cop = copy(obj);
cop.hair = "green";
zog(obj.hair, obj.cop); // blue, green
obj.cars.push("vw");
zog(obj.cars.length, cop.cars.length); // 3, 2

// copy with clone for cloneable objects
// without the second parameter as true these obj2[0] and obj3[0] would be the same
// and when we do the second addTo it would just move the circle to the second position
const obj2 = [
   new Circle(20,green),
   new Rectangle(30,30,green),
   new Triangle(40,40,40,green)
];
const obj3 = copy(obj, true); // copy and clone
obj2[0].addTo(stage).pos(100, 200);
obj3[0].addTo(stage).pos(300, 400);

PARAMETERS obj - the object to copy clone - (default false) set to true to clone any cloneable object while copying cloneContainers - (default true if clone true) set to false to not copy objects with type="Container" RETURNS a new Object CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

merge(objects)

merge zim function DESCRIPTION Merges any number of objects {} you pass in as parameters. Overwrites properties if they have the same name. Returns a merged object with original objects kept intact. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const one = {food:"chocolate"};
const two = {drink:"milk"};
const tri = merge(one, two);
zog(tri.food, tri.drink); // chocolate, milk

PARAMETERS objects - a list of objects (any number) to merge together RETURNS a new Object CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

sortObject(obj, property, reverse)

sortObject zim function DESCRIPTION Sorts an Object with inner objects by a property of the inner object NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const sortData = {
   Z_JJK34:{
      date:"2023-06-29",
      prefix:"Bits",
      title:"Basic Physics" // etc.
   },
   Z_92KL1:{
      date:"2023-06-28",
      prefix:"CodePen",
      title:"Art Puzzle with Scrambler"
   }
}
   
const sorted = sortObject(sortData, "date");
loop(sorted, (key, val)=>{
   zog(key + " : " + val.date); // sorted by date
});

PARAMETERS obj - an object with inner objects all having similar property names property - the property (as a string) of the inner object on which to sort reverse - (default false) set to true to reverse the sort RETURNS a new Object with sorted properties - the original object is left as is CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

arraysEqual(a, b, strict)

arraysEqual zim function DESCRIPTION Finds out if arrays are same (including nested arrays). Works for arrays with strings and numbers (not necessarily other objects). (Slightly modified Evan Steinkerchnerv & Tomas Zato) NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const one = [1,2,"wow",[3,4]];
const two = [1,2,"wow",[3,4]];
zog(arraysEqual(one, two)); // true
one[3][1] = 5;
zog(arraysEqual(one, two)); // false

PARAMETERS a, b - the arrays to check to see if they are equal strict - (default true) set to false so order in arrays does not matter RETURNS a Boolean CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

arrayMinMax(arr)

arrayMinMax zim function DESCRIPTION Returns an object with {min, max} for min and max values of an array. Or null for value if not a number. (Thanks Lior Elrom from StackOverflow) NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

zog(arrayMinMax([1,22,2,10]).max); // 22

PARAMETERS arr - a linear array with numbers RETURNS an object with min and max properties CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

isEmpty(obj)

isEmpty zim function DESCRIPTION returns whether an object literal is empty NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const o = {};
zog( isEmpty(o) ); // true
o.test = 9;
zog( isEmpty(o) ); // false

PARAMETERS obj - the object literal to test RETURNS a Boolean CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

isPick(obj)

isPick zim function DESCRIPTION Returns whether an object is a SPECIAL Pick literal of type [], {min:val, max:val}, {noPick:val} or function that returns a value If any other object is passed to Pick, it just gets passed through So in theory, all objects are in Pick literal format but isPick() returns true if object operated on, not just passed through NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

zog(isPick(1)); // false
zog(isPick([1,2,3])); // true
zog(isPick({age:10})); // false
zog(isPick({min:10,max:20})); // true
zog(isPick({noPick:[1,2,3]})); // strange but true
zog(isPick(function(){})); // false
zog(isPick(function(){return 20;})); // true
const s = series(1,2,3);
zog(isPick(s)); // true
// important that the isPick() does not run the series to test if ZIM VEE
// so it checks the array property of series rather than checking for a function return value
zog(s()); // 1

PARAMETERS obj - the string to test RETURNS a Boolean as to whether obj is SPECIAL ZIM Pick literal CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

isJSON(str)

isJSON zim function DESCRIPTION returns whether a string is a JSON string NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const s = '{"age":7,"name":"Dan Zen"}';
zog( isJSON(s) ); // true
const b = "hello";
zog( isJSON(b) ); // false

PARAMETERS str - the string to test RETURNS a Boolean CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

parseJSON(str)

parseJSON zim function DESCRIPTION receives a JSON string or a "close-to" JSON string and returns the parsed object NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const badJSON = `{
   "inner":{
      // comments can be added
      prop:"note prop and prop2 are missing quotes",
      // another comment
      prop2:"note the comma on the end will be ok",
   }
}`;
// zog(JSON.parse(badJSON)); // would cause error
zog(parseJSON(badJSON)); // will log a valid object

PARAMETERS str - the JSON or "close-to" JSON string this can be missing the "" around the property names and can have comments between lines and trailing commas will not cause a problem RETURNS an object CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

decimals(num, places, addZeros, addZerosBefore, includeZero, time)

decimals zim function DESCRIPTION Rounds number to the number of decimal places specified by places. Negative number places round to tens, hundreds, etc. If addZeros is set to a number it adds 0 in empty spaces up to that many places after the decimal If addZerosBefore is set to a number it adds 0 in empty spaces up to that many places before the decimal NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const score = 1.234;
score = decimals(score);
zog(score); // 1.2
zog(decimals(1.8345, 2)); // 1.83
zog(decimals(123,-1)); // 120
zog(decimals(2.3,null,2)); // 2.30
zog(decimals(3,null,null,2)); // 03
zog(decimals(12/60,2,2,1,null,true)); // 0:12

PARAMETERS num - the Number to operate on places - (default 1) how many decimals to include (negative for left of decimal place) addZeros - (default 0) set to number of places to fill in zeros after decimal (and return String) addZerosBefore - (default 1) set to number of places to fill in zeros before decimal (and return String) includeZero - (default true) set to false to always have zero just be 0 without any extra zeros time - (default false) a swap of : for . to handle minutes and seconds (not hours) take time in seconds and divide by 60 and pass that in for num RETURNS a rounded Number or a String if addZeros, addZerosBefore or time is true CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

countDecimals(num)

countDecimals zim function DESCRIPTION Counts the number of decimals in a number Provided by Matthew Layton, A. Wolff - Stack Overflow NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const num1 = countDecimals(1.234); // num1 is 3
const num2 = countDecimals(22); // num2 is 0

PARAMETERS num - the Number for which to count decimals RETURNS the number of decimal places CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

sign(num)

sign zim function DESCRIPTION returns -1, 0 or 1 depending on whether the number is less than, equal to or greater than 0 NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

let speed;
speed = 20;
zog(sign(speed)); // 1

speed = 0;
zog(sign(speed)); // 0

speed = -20;
zog(sSign(speed)); // -1

PARAMETERS num - the Number to operate on RETURNS -1, 0 or 1 CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

constrain(num, min, max, negative)

constrain zim function DESCRIPTION returns a number constrained to min and max NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const cirle.x = constrain(circle.x, circle.radius, W-circle.radius);
// circle.x will not be smaller than the radius or bigger than W-radius

const speed = constrain(speed, minSpeed, maxSpeed, true);
// will confine the speed between minSpeed and maxSpeed if speed is positive
// and confine the speed between -maxSpeed and -minSpeed if the speed is negative

PARAMETERS num - the number to be constrained min - (default 0) the minimum value of the return number max - (default Number.MAX_VALUE) the maximum value of the return number negative - (default false) allow the negative range of min and max when num is negative RETURNS num if between min and max otherwise returns min if less or max if greater (inclusive) RETURNS num between -max and -min if num is negative and negative parameter is set to true CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

dist(a, b, c, d)

dist zim function DESCRIPTION Calculates the distance between two points. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// using point values for each
const p1 = new Point(100, 100); // or {x:100, y:100}
const p2 = new Point(200, 200);
zog(dist(p1, p2)); // 141.42...

EXAMPLE

// using x and y values for each
const distance = dist(W/2, H/2, F.mouseX, F.mouseY);
// distance of mouse from center of stage

PARAMETERS a - first Point - any object with x and y values - eg. a zim Container or zim Point or {x:10, y:30} or if four parameter values, an x value of the first point b - second Point - any object with x and y values or if four parameter values, a y value of the first point c - (default null) an x value of a second point - if using x and y values d - (default null) a y value of a second point - if using x and y values RETURNS a positive Number that is the distance (could be on an angle) CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

rectIntersect(a, b, margin)

rectIntersect zim function DESCRIPTION Returns true if two rectangles are intersecting - this is a very fast but exact calculation NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// using point values for each
const r1 = {x:100, y:100, width:300, height:200}
const r2 = new Boundary(50,200,100,100);
zog(rectIntersect(r1, r2)); // true

PARAMETERS a - first rectangle with x, y, width and height properties - such as a bounds or Boundary make sure that these are in the same coordinate systems - use ZIM boundsToGlobal for instance b - second rectangle with x, y, width and height properties margin - (default 0) positive value adds margin (more likely to intersect) and negative subtracts (less likely to intersect) RETURNS a Boolean as to whether rectangles are intersecting CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

boundsAroundPoints(points)

boundsAroundPoints zim function DESCRIPTION Returns a rectangle {x,y,width,height} around an array of points {x,y} NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const blob = new Blob();
const points = blob.interpolate();
zog(boundsAroundPoints(points)); // {x:-100, y:-100, width:200, height:200}
// could call this after resizing the blob to get the rough bounds of the blob (or squiggle)
// interpolate defaults to 1 so setting 5 would be even more precise, etc.

PARAMETERS points - an array of points with x and y properties. RETURNS an object with x, y, width and height properties representing the rectangle around the points provided CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

angle(a, b, c, d)

angle zim function DESCRIPTION Calculates the angle between two points NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const angle = angle(W/2, H/2, W/2+100, H/2+100); // 45
// angle from center of stage to 100, 100 to the right and down from the center of the stage

const angle2 = angle(W/2, H/2, W/2-100, H/2+100); // 135

const angle3 = angle(W/2, H/2, W/2+100, H/2-100); // 315

EXAMPLE

// make an orange orthographic pipe with a red end
const circle1 = new Circle(20,orange).center();
const circle2 = new Circle(20,red).loc(600,500);
new Rectangle(20,20,orange)
   .reg(LEFT,CENTER)
   .loc(circle1)
   .bot()
   .siz(dist(circle1, circle2), circle1.width)
   .rot(angle(circle1, circle2));

PARAMETERS a - first Point - any object with x and y values - eg. a zim Container or zim Point or {x:10, y:30} or if four parameter values, an x value of the first point b - second Point - any object with x and y values or if four parameter values, a y value of the first point - see also ** c - (default null) an x value of a second point - if using x and y values d - (default null) a y value of a second point - if using x and y values ** if there is only one point provided, then a first point of 0,0 is assumed and the the point provided becomes the second point RETURNS a positive Number that is the angle between first and second point CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

TAU, DEG, RAD, PHI

TAU, DEG, RAD, PHI zim constants DESCRIPTION ZIM degrees and radian constants If working in radians, TAU is equal to 2 radians (360). This allows easy visualization of angles - TAU/2 is 180, TAU/4 is 90, etc. DEG is 180/Math.PI so you multiply a radian value by DEG to get degrees. RAD is Math.PI/180 so you multiply a degree value by RAD to get radians. PHI is the golden ratio or Math.pow(5,.5)*.5+.5 or 1.6180339887… NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

Math.sin(TAU/4); // sin of 90 degrees (1)
// is same as
Math.sin(90*RAD);
// is same as
Math.sin(90*Math.PI/180);
// and
Math.asin(1)*DEG; // is 90

CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

smoothStep(num, min, max)

smoothStep zim function DESCRIPTION smoothStep takes an input value and outputs a value between 0 and 1 that represents a transition between the min and max with easing at both ends. If you want the easing to be more pronounced, then reduce difference between min and max. If the value falls outside the min or max then it is set to the min or max. Remember the return value is between 0 and 1 so you can multiply by max-min and add it to min to get a value at the original scale. Used to make blobs with Noise(): https://zimjs.com/noise/blobs.html NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// here we use smoothStep to make a gradient between black and white
// not an even one right across but a gradient across a transition zone of 40-100

// create an empty Bitmap size 200, 200 and center it on the stage
const bmp = new Bitmap(null, 200, 200).center();

// we need to loop and get a value for each pixel
// normally we loop across the rows and then do each column
// but here we are making a horizontal gradient
// so we will loop across the x and get the desired value
// then when we loop across the y in the inner loop, we just use that same value
for (let x = 0; x < bmp.width; x++) {
   // making gradient in x only so calculate smoothStep here
   // x will be from 0 to the width of 200
   // we pass in a min of 40 and a max of 100
   // the result of smoothStep is between 0 and 1
   // so from 0 to 40 the return of smoothStep will be 0
   // and from 100 to 200 the return of smoothStep will be 1
   // In between, the return value starts off close to 0, then speeds up
   // and then slows down to 1 in a curve that is somewhat like the letter f
   // When we multiply by 255 and apply that result to each color,
   // we get black and then a range of greys and then white
   const value = smoothStep(x, 40, 100)*255;

   // now we loop down the column for the x position
   for (let y = 0; y < bmp.height; y++) {
      // imageData is four values per pixel
      // the red, green, blue and alpha
      // in one big long array - each value will be constrained to between 0 and 255
      // this i value will increase by 4 each time
      // then we write the same value for red, green, blue to get a shade of grey
      let i = (x + y * bmp.width) * 4;
      bmp.imageData.data[i] = value; // red (0-255)
      bmp.imageData.data[i + 1] = value; // green (0-255)
      bmp.imageData.data[i + 2] = value; // blue (0-255)
      bmp.imageData.data[i + 3] = 255; // alpha (0-255)
   }
}
bmp.drawImageData(); // draw the imageData to the Bitmap

PARAMETERS num - the input value with respect to min and max min - the lower edge for smoothStep (often termed edge0) - anything smaller will be set to min max - the upper edge for smoothStep (often termed edge1) - anything bigger will be set to max RETURNS a number between 0 and 1 that represents a transition factor CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

unicodeToUTF(val)

unicodeToUTF zim function DESCRIPTION unicodeToUTF() converts unicode to UTF format. This is used internally by ZIM Emoji and EmojiPicker. Unicode can be pasted into text but can cause problems in scripts when writing to databases - like ZIM Zap and ZIM Kids Slate. There is a converter here: https://zimjs.com/emoji if the MORE button is pressed. This is the code that handles that conversion. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

zog(unicodeToUTF("Paste unicode Slightly Smiling Face U+1F642 here")); // \ud83d\ude42

PARAMETERS val - the unicode emoji/character (not the unicode) RETURNS a UTF string matching the unicode CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

capitalizeFirst(string)

capitalizeFirst zim function DESCRIPTION Capitalize the first letter of a String. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

let name = "roger";
name = capitalizeFirst(name); // remember to assign back to string
zog(name); // Roger

PARAMETERS string - the string to capitalize the first letter RETURNS the string with the first letter capitalized CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Ajax(master, couple, lock, unique)

Ajax zim class DESCRIPTION An AJAX class to send data back and forth to a server without reloading the page NOTE also see ZIM async() to send data back and forth as JSONp using async can avoid various security issues with cross domain access NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// GET - note: GET is limited to approximately 2048 characters
const ajax = new Ajax();
new Button().center().tap(()=>{
   ajax.get("https://yourserver/ajax.php?record=pressed");
});
<?php
   $record = isset($_GET["record"]) ? $_GET["record"] : "";
   // $record would now hold the string "pressed"
?>

EXAMPLE

// GET with user input and server response
const query = new TextArea(300,90).center();
new Button({label:"SUBMIT", corner:5}).sca(.7).pos(0,100,CENTER,CENTER)
   .tap(()=>{
      new Ajax().get("https://yourserver/ajax.php?query="+encodeURI(query.text), callback);
   });
function callback(data) {
   query.text = "Date: " + data.date + "\nAnswer: " + data.answer;
}
<?php
   $query = isset($_GET["query"]) ? $_GET["query"] : "";
   // probably get info from database
   $array = [];
   $array["date"] = "March 10, 2020";
   $array["answer"] = "yes, of course!";
   echo json_decode($array);
?>

EXAMPLE

// POST - virtually unlimited size
const ajax = new Ajax();
new Button().center().tap(()=>{
   var data = {name:"Dr Abstract", occupatio:"creator"};
   // data will automatically have JSON.stringify() applied
   var id = "AB234";
   ajax.post("https://yourserver/ajax.php", data, "add", id, callback);
});
function callback(data) {
   zog(data.name); // "Dr Abstract"
}
<?php
   // ZIM Ajax POST the data is received as a data property:
   $data = isset($_POST["data"]) ? $_POST["data"] : "";
   // a command can be sent for add, select, update, delete, etc.
   $command = isset($_POST["command"]) ? $_POST["command"] : "";
   // extra information can be collected such as an id, etc.
   $extra = isset($_POST["extra"]) ? $_POST["extra"] : "";
   // add $data to database as JSON string for the id in the $extra
   if ($command == "add") {}
   // The data can be decoded too
   $array = json_decode($data, true);

   // here we "round-trip" to show it can be done
   // send back encoded info from Database
   echo json_encode($array);
?>

EXAMPLE

   // put - sends data in body of content
   // same as POST but no command and receive in PHP as follows:
<?php
   // ZIM Ajax put receive as follows:
   $array = json_decode(file_get_contents('php://input'), true);
?>

PARAMETERS master - data to be sent with every get() or post() (not put()) this can be collected in php, for example, as $GET_["master"] or $POST_["master"] couple - (default false) - set to true to turn nested JSON into a single layer ** for POST only - use ZIM couple() and decouple() manually with GET and PUT see ZIM couple() and decouple() for more information data for POST will be coupled when sent and uncoupled when received lock - (defualt null) send an optional lock id - would need to be processed on the server unique - (defualt null) send an optional unique=true - would need to be processed on the server METHODS get(url, callback) - send and receive based on GET (approximate limit 2048 characters) the url will have parameters in cgi format to send information for example: "server.php?name="+encodeURI("Dr Abstract")+"&occupation=creator"; in PHP access these with $_GET["name"], $_GET["occupation"], etc. callback is the function to call and will receive (data, error) as parameters the data will automatically have JSON.parse() applied if in JSON format post(url, data, command, extra, callback) - send and receive based on POST ** accepts the ZIM DUO technique of regular parameters or a configuration object with properties matching parameters url is the url to a server script such as php or node the url will not need parameters but rather use the data, command and extra data will automatically have JSON.stringify() applied in PHP access this with $data = $_POST["data"]; often, we might store this directly as JSON in the database but it can be split up and put in fields as follows $assoc = json_decode($data, true); // true for assoc array if desired command is what to do with the data and will be encodeURI sent as variable command so for instance receive $command = $_POST["command"]; this could have a value of "select", "add", "update", "delete", etc. extra is any extra filter information and will be encodeURI sent as variable extra so for instance receive $extra = $_POST["extra"]; this could be an id or a search term callback is the function to call and will receive (data, error) as parameters the data will automatically have JSON.parse() applied if in JSON format put(url, data, call) - send and receive based on PUT put sends data in the body of the file the url will not have parameters but rather use the data the data will automatically have JSON.stringify() applied in PHP access this with: $array = json_decode(file_get_contents('php://input'), true); call is the function to call and will receive (data, error) as parameters the data will automatically have JSON.parse() applied if in JSON format PROPERTIES master - get or set the master data being sent with each get() or post() (not put()) couple - get or set whether the POST data is coupled when sent and uncoupled when received (not get() and put()) lock - get or set the lock data being sent with each get() or post() (not put()) CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Noise(seed)

Noise zim class DESCRIPTION Noise creates OpenSimplex Noise: https://en.wikipedia.org/wiki/OpenSimplex_noise Converted from https://www.npmjs.com/package/open-simplex-noise See examples at https://zimjs.com/noise/ In general, this is special noise where the pixels relate to one another in a complex way. This connection, lets us do things like create terrains or blobs, etc. that look organic. There is 1D, 2D, 3D, and 4D noise where we pass in one value, two values, three values and four values. We always get back a number between -1 and 1 and this result relates to the results around it. 1D - we can plot 1D by drawing line segments across the stage (x) and setting the y value to the result of simplex1D(x) This makes a 2D mountain-like terrain across the stage 2D - if we keep the plot from the 1D but use 2D and change the second parameter, we can animate the line. We just need to adjust the second parameter by a very small amount each time such as .005. Or we can plot put the return value of simplex2D onto its x,y matching location in a Bitmap mapping it to a greyscale to make a traditional noise pattern. We can adjust the "size" of the noise by dividing the x and y values (frequency). If we use the ZIM smoothStep() function we can smoothen these to make blobs. We can also use the return value as height for 3D terrain. 3D - if we keep the traditional noise/blob pattern from the 2D but use simplex3D and animate the third parameter, we can animate the 2D noise in time which looks great when we animate blobs! This plotting is thousands of computations and will bog the computer if too big. 4D - will allow us to animate 3D values, etc. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// 1D Noise to make a jagged line across the stage
const noise = new Noise();
const shape = new Shape(W, H)
   .addTo().s("black").ss(2).mt(0, H/2);
loop(W/50, i=>{
   shape.lt((i+1)*50, H/2 + noise.simplex1D(i)*200);
});
// the above can be animated by using simplex2D and animating the second number by small amounts

EXAMPLE

// 2D noise
// create a Noise object:
const noise = new Noise();

// create an empty Bitmap size 200, 200 into which to draw the noise
const bmp = new Bitmap(null, 200, 200).center();

// we fill the bitmap starting from top left going across in the inner loop,
// then down, then across, etc. until we get to bottom right.
for (let y = 0; y < bmp.height; y++) {
   for (let x = 0; x < bmp.width; x++) {
      // the noise methods return a number from -1 to 1
      // by adding 1 we get a number between 0 and 2 and we divide by 2 to get 0-1
      // and we multiply this by 255 to get a number between 0 and 255
      let value = (noise.simplex2D(x,y)+1)/2 * 255;
      // imageData is one big array with four values per pixel
      // the red, green, blue and alpha
      // each value will constrained to between 0 and 255
      // the i value is how many on the current row plus the columns from the previous rows
      // and we set it to increase by 4 each time giving us a place for each color and alpha
      // We write the same value for red, green, blue to get a shade of grey
      let i = (x + y * bmp.width) * 4;
      bmp.imageData.data[i] = value; // red (0-255)
      bmp.imageData.data[i + 1] = value; // green (0-255)
      bmp.imageData.data[i + 2] = value; // blue (0-255)
      bmp.imageData.data[i + 3] = 255; // alpha (0-255)
   }
}
bmp.drawImageData(); // this draws the imageData to the Bitmap

// Here is the same example to get blobs using smoothStep:

const f = 25; // try changing this number around
for (let y = 0; y < bmp.height; y++) {
   for (let x = 0; x < bmp.width; x++) {
      let value = (noise.simplex2D(x/f, y/f)+1)/2; // 0-1
      // smoothStep sets less than .3 to 0 and greater than .35 to 1
      // and transitions between using an easing formula in the shape of an f
      value = smoothStep(value, .3, .35) * 255;
      let i = (x + y * bmp.width) * 4;
      bmp.imageData.data[i] = value; // red (0-255)
      bmp.imageData.data[i + 1] = value; // green (0-255)
      bmp.imageData.data[i + 2] = value; // blue (0-255)
      bmp.imageData.data[i + 3] = 255; // alpha (0-255)
   }
}
bmp.drawImageData();

PARAMETERS seed - (default Math.random()*1000000) keeping the same seed can remake a pattern the same METHODS simplex1D(x) - returns a noise value between -1 and 1 In each method, the noise value relates to its neighbor rather than a completely random value simplex2D(x,y) - returns a noise value between -1 and 1 simplex3D(x,y,z) - returns a noise value between -1 and 1 simplex4D(x,y,z,w) - returns a noise value between -1 and 1 PROPERTIES seed - read only - the seed that was used for the Noise object CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Point(x, y, z, q, r, s, t, u, v, w)

Point zim class extends a createjs.Point DESCRIPTION Stores x, y, z, q, r, s, t, u, v, w properties. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const point = new Point(100, 100);
zog(point.x, point.y); // 100, 100

PARAMETERS x - (default 0) the x value of the point y - (default 0) the y value of the point z - (default 0) the z value of the point - probably not used q - (default 0) the q value of the point - very probably not used r - (default 0) the r value of the point - very probably not used s - (default 0) the s value of the point - very probably not used t - (default 0) the t value of the point - very probably not used u - (default 0) the u value of the point - very probably not used v - (default 0) the v value of the point - very probably not used w - (default 0) the w value of the point - very probably not used METHODS - thanks nycjoseph ** only when using the ZIM version of CreateJS subtract(point) - subtracts the provided point from original point returns the resulting point add(point) - adds the provided point to original point returns the resulting point angle(point) - gets an angle to the provided point returns the angle in degrees length() - gets the length from 0,0 to the point returns the length from 0,0 to the point distance(point) - gets the distance to the provided point returns the resulting distance project(angle, length) gets a point at an angle (degrees) and distance returns the resulting point interpolate(point, number) gets a point at a ratio to the provided point returns the resulting point average(point) - gets a point half way to the provided point returns the resulting point ** these have been added to ZIM's CreateJS but in Radians also see CreateJS docs for setValues, copy and clone PROPERTIES x - the x value of the point y - the y value of the point z - the z value of the point - probably not used q - the q value of the point - very probably not used r - the r value of the point - very probably not used s - the s value of the point - very probably not used t - the t value of the point - very probably not used u - the u value of the point - very probably not used v - the v value of the point - very probably not used w - the w value of the point - very probably not used CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Bezier(a, b, c, d)

Bezier zim class DESCRIPTION Creates data for a Cubic Bezier to give x and y at a ratio of the curve Also gives mx and my for a modified x and y that is more evenly spaced Thanks Ivo Wetzel - StackExchange Used internally by zim.getCurvePoint() used by Squiggle, Blob, Beads, and animate() in path NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const a = {x:100, y:100}; // start point
const b = {x:400, y:100}; // control point for start point
const c = {x:100, y:300}; // control point for end point
const d = {x:300, y:300}; // end point
const bezier = new Bezier(a,b,c,d);
new Shape().s(black).mt(a.x,a.y).bt(b.x,b.y, c.x,c.y, d.x,d.y).addTo();
loop(10, i=>{
   // original spacing
   // new Circle(5).loc(bezier.x(i/10), bezier.y(i/10));

   // modified spacing to be more even
   new Circle(5).loc(bezier.mx(i/10), bezier.my(i/10));
});

PARAMETERS // all parameters are points with x and y properties {x:val, y:val} a - start point of Bezier curve b - control point for the start point c - control point for the end point d - end point METHODS x(r) - the x position of a point at ratio r (0-1) on the curve y(r) - the y position of a point at ratio r (0-1) on the curve mx(r) - the evenly-spaced x position of a point at ratio r (0-1) on the curve my(r) - the evenly-spaced y position of a point at ratio r (0-1) on the curve PROPERTIES a, b, c, d - the points passed in - each having x and y properties CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Boundary(x|bounds, y, width, height)

Boundary zim class DESCRIPTION Stores the data for a rectangle with x, y, width and height. Can be used with ZIM drag(), gesture() for boundaries and the Physics module for world boundary. NOTE A createjs.Rectangle or an object {} with x, y, width and height properties can also be used Boundary was introduced to reduce confusion over having a ZIM Rectangle (Shape) and a CreateJS Rectangle (data) NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

new Circle(100, blue)
   .center()
   .drag(new Boundary(0,0,W,H));
// note: drag and gesture used to have rect parameters
// these have now been depreciated and replaced with boundary parameters

// CONTRACT
// the drag() boundary contains the registration point
// note: the gesture() boundary contains the whole shape of the object
// here, we keep the circle inside the stage by contracting the Boundary by the radius
var radius = 100;
new Circle(radius, red)
   .center()
   .drag(new Boundary(0,0,W,H).contract(radius));

PARAMETERS x|bounds - the x position of the Boundary or pass in an object with {x,y,width,height} - such as obj.getBounds() this allows manipulation with contract if desired at which point, the other parameters are ignored y - the y position of the Boundary width - the width of the Boundary height - the height of the Boundary PROPERTIES x - the x position of the Boundary y - the y position of the Boundary width - the width of the Boundary height - the height of the Boundary METHODS contract(number|x, y, width, height) - number of pixels to make the Boundary smaller passing in a single number will contract this on all sides passing in two numbers will contract from horizontal and vertical accordingly passing in four numbers will contract from the sides accordingly (left, top, right, bottom) note: to expand pass in a negative number returns object for chaining CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

GradientColor(colors, ratios|angle, x0, y0, x1, y1)

GradientColor zim class DESCRIPTION Creates data for a Linear Gradient that can be used to color ZIM Shapes like Circle, Rectangle, Triangle, Squiggle, Blob, Flare and therefore all ZIM component background colors, etc. Also see ZIM RadialColor and BitmapColor classes NOTE the base ZIM Shape class will need gradients applied as usual NOTE The chainable methods for linearGradient() and radialGradient() are depricated NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// linear gradient from pink to purple across whole gradient
// with the start at 0,0 and end at 0,500 - so from top to bottom
new Rectangle(1000, 500, new GradientColor([pink,purple], [0,1], 0,0, 0,500)).addTo();

// alternatively, a short version is provided
// this makes the gradient across the object at 90 degrees - so pointing down as 0 points to the right
new Rectangle(1000, 500, new GradientColor([pink,purple],90)).addTo();

EXAMPLE

// linear gradient with 30% pink transitioning to green at half way then to 30% pure pink
// along a horizontal path from 0 to 1000 in width
// could also go diagonal for instance 0,0,1000,500
new Rectangle(1000, 500, new GradientColor([pink,green,purple], [.3,.5,.7], 0,0, 1000,0)).addTo();

// alternatively, a short version is provided
// this makes the gradient across the object at the default 0 degrees - so pointing right
// so the angle can be provided instead of the the ratios as in the previous example
// or the angle can be provided after the ratios to replace the x and y values
new Rectangle(1000, 500, new GradientColor([pink,green,purple], [.3,.5,.7], 0).addTo();
// or better yet as the default angle is 0:
new Rectangle(1000, 500, new GradientColor([pink,green,purple], [.3,.5,.7]).addTo();

PARAMETERS colors - an Array of colors for the gradient, can be more than two ratios|angle - an Array of 0-1 numbers reprenting the start position of transitions for the colors above or an angle with 0 (default) goes from left to the right 20 would angle down slightly from left to right -20 would angle up slightly from left to right 90 would point straight down 180 would go from right to left 270 or -90 would go from the bottom to the top if an angle is provided then x0,x1,y0,y1 is ignored and the size of the object's bounds is used to scale the gradient if no value or an angle is provided the ratios will be divided evenly across the colors x0|angle - the x position to start the gradient if no further parameter values are provided then this will be the angle see the ratios|angle parameter for information on angle y0 - the y position to start the gradient x1 - the x position to end the gradient y1 - the y position to end the gradient PROPERTIES type - the type of color as a String ** the above parameters are all available as properties ** but will not change objects with their color already set CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

RadialColor(colors, ratios, x0, y0, r0, x1, y1, r1)

RadialColor zim class DESCRIPTION Creates data for a Radial Gradient that can be used to color ZIM Shapes like Circle, Rectangle, Triangle, Squiggle, Blob, Flare and therefore all ZIM component background colors, etc. Also see ZIM GradientColor and BitmapColor classes NOTE the base ZIM Shape class will need gradients applied as usual NOTE The chainable methods for linearGradient() and radialGradient() are depricated NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// radial gradient from pink in center to purple at edge
// with the start at 0,0,0 and end at 0,0,200 - so from radius to center
new Circle(200, new RadialColor([pink,purple], [0,1], 0,0,0, 0,0,200)).center();

// or a shortened version is provided:
new Circle(200, new RadialColor([pink,purple])).center();

// this shortened version also works
new Circle(200, new RadialColor([pink,green,purple], [0,.2,1])).center();

// this shortened version will apply the gradient out to the corners of the rectangle
new Rectangle(200, 400, new RadialColor([pink,purple])).center();

EXAMPLE

// radial gradient from dark to light with alpha reduced
// start fading the light right away to 30% the gradient then use the dark
// move the center of the dark right and up and bigger than radius
// move the center of the light right and up and at 0
// this makes a moon with the dark shade at the bottom left
new Circle(100, new RadialColor(
   ["rgba(0,0,0,.2)","rgba(255,255,255,.2)"],[0,.3], 50,-30,120, 40,-40,0)
).center()

PARAMETERS colors - an Array of colors for the gradient, can be more than two ratios - an Array of 0-1 numbers reprenting the start position of transitions for the colors above if not provided, the ratio will be divided evenly across the provided colors ** the below parameters are optional and will be the center to the edge of the object if not provided x0 - the x position to start the gradient y0 - the y position to start the gradient r0 - the radius at the start of the gradient x1 - the x position to end the gradient y1 - the y position to end the gradient r1 - the radius at the end of the gradient PROPERTIES type - the type of color as a String ** the above parameters are all available as properties ** but will not change objects with their color already set CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

BitmapColor(image, repetition, matrix)

BitmapColor zim class DESCRIPTION Creates data for a Bitmap fill from a loaded asset that can be used to color ZIM Shapes like Circle, Rectangle, Triangle, Squiggle, Blob, Flare and therefore all ZIM component background colors, etc. Also see ZIM GradientColor and RadialColor classes See: https://youtu.be/xgXVRSVVJTw?t=861 NOTE the base ZIM Shape class will need a bitmap fill applied as usual NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const assets = "flecks.jpg";
const path = "https://zimjs.org/assets/";
new Frame(scaling, width, height, color, outerColor, ready, assets, path);
function ready() {
   new Rectangle(W, H, new BitmapColor("flecks.jpg")).addTo();
   // or use new Pic("flecks.jpg") instead of string "flecks.jpg" - but ZIM will figure it out
}

PARAMETERS image - a ZIM Bitmap() such as available with Pic() or asset() when asset is loaded with ZIM Frame or F.loadAssets() also accepts the string name of an asset that would go in the new Pic() or asset() may accept url to html image but image needs to be loaded first so would recommend usual ZIM asset loading repetition - (default "repeat") the repeat of the Bitmap fill also "repeat-x", "repeat-y" or "no-repeat" matrix - a transformation matrix to apply to the Bitmap PROPERTIES type - the type of color as a String ** the above parameters are all available as properties ** but will not change objects with their color already set CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Damp(startValue, damp)

Damp zim class DESCRIPTION Damping emulates things slowing down due to friction. The movement heads towards the right value and looks organic. This is similar if not the same as easing out when tweening. Create your Damp object outside an interval or Ticker then inside an interval or ticker call the convert method. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const d = new Damp(parameters);
setInterval(()=>{
   dampedValue = d.convert(desiredValue);
}, 100);

you would then apply that desired value to a property such as x or y or scale if you want to do both x and y then you need two Damp objects and two convert calls (you can do both in one interval or ticker) EXAMPLE

const circle = new Circle();
circle.center();
const dampX = new Damp(circle.x);
const dampY = new Damp(circle.y);
// start moving once mouse enters stage
// this event will only run once (the last parameter is true)
S.on("stagemousemove", start, null, true);
function start() {
   Ticker.add(()=>{
      circle.x = dampX.convert(F.mouseX);
      circle.y = dampY.convert(F.mouseY);
   });
}

PARAMETERS supports DUO - parameters or single object with properties below startValue - (default 0) start object at this value and then start damping damp - (default .1) the damp value with 1 being no damping and 0 being no movement METHODS convert(value) - converts a value into a damped value immediate(value) - immediately goes to value and returns the Damp object PROPERTIES damp - can dynamically change the damping (usually just pass it in as a parameter to start) lastValue - setting this would go immediately to this value (would not normally use) CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

Proportion(baseMin, baseMax, targetMin, targetMax, factor, targetRound, clamp, clampMin, clampMax)

Proportion zim class DESCRIPTION Proportion converts an input value to an output value on a different scale. (sometimes called a map() function) For instance, like a slider controlling the scale of an object or sound volume. Make a Proportion object and then in an interval, ticker or event, convert the base value to the target value using the convert method. SEE: https://zimjs.com/test8/clamp.html NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

F.loadAssets("mySound.mp3");
F.on("complete", ()=>{
   // must have also interacted with app before playing sound
   const sound = new Aud("mySound.mp3").play();
   const p = new Proportion(0, 10, 0, 1);
   const dial = new Dial(); // default range of 0 to 10
   dial.value = 10;
   dial.on("change", ()=>{
      sound.volume = p.convert(dial.value);
   }); // end of dial change
}); // end sound loaded

PARAMETERS supports DUO - parameters or single object with properties below baseMin - min for the input scale (say x value) baseMax - max for the input scale (say x value) targetMin - (default 0) min for the output scale (say volume) targetMax - (default 1) max for the output scale (say volume) factor - (default 1) is going the same direction and -1 is going in opposite direction targetRound - (default false) set to true to round the converted number clamp - (default true) set to false to let results go outside min and max range also see clampMin and clampMax to adjust ends individually clampMin - (default clamp) set to true or false to let results go outside min range clampMax - (default clamp) set to true or false to let results go outside max range METHODS convert(input) - will return the output property (for instance, a volume) NOTE the object always starts by assuming baseMin as baseValue just call the convert method right away if you want it to start at a different baseValue for instance, if your slider went from 100 to 500 and you want to start at half way make the object and call p.convert(300); on the next line CLOSE ▲PAGE ▤CODE ▤BITS

CLOSE ▲

ProportionDamp(baseMin, baseMax, targetMin, targetMax, damp, factor, targetRound, clamp, clampMin, clampMax)

ProportionDamp zim class DESCRIPTION ProportionDamp converts an input value to an output value on a different scale with damping. Works like Proportion Class but with a damping parameter. Damping needs constant calculating so do not put in mousemove event. The below example scales the circle based on the mouse height. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const circle = new Circle(50, red);
circle.center(); // center method added in ZIM 4TH
const pd = new ProportionDamp(0, H, 0, 5, .2);
Ticker.add(()=>{
   circle.sca(pd.convert(S.mouseV)); // scale method added in ZIM 4TH
}, stage);

PARAMETERS supports DUO - parameters or single object with properties below baseMin - min for the input scale (say x value) baseMax - max for the input scale (say x value) targetMin - (default 0) min for the output scale (say volume) targetMax - (default 1) max for the output scale (say volume) damp - (default .1) the damp value with 1 being no damping and 0 being no movement factor - (default 1) is going the same direction and -1 is going in opposite direction targetRound - (default false) set to true to round the converted number clamp - (default true) set to false to let results go outside min and max range also see clampMin and clampMax to adjust ends individually clampMin - (default clamp) set to true or false to let results go outside min range clampMax - (default clamp) set to true or false to let results go outside max range METHODS convert(input) - converts a base value to a target value immediate(input) - immediately uses the input to set the target value (no damping) and returns the ProportionDamp object immediateValue(input) - immediately sets the target value (no damping) and returns the ProportionDamp object dispose() - clears interval PROPERTIES damp - can adjust this dynamically (usually just pass it in as a parameter to start) NOTE the object always starts by assuming baseMin as baseValue if you want to start or go to an immediate value without easing then call the pd.immediate(baseValue) method with your desired baseValue (not targetValue) CLOSE ▲PAGE ▤CODE ▤BITS

CLOSE ▲

Dictionary(unique)

Dictionary zim class DESCRIPTION An object that uses objects as keys to give values. Similar to an object literal with properties except the property names are objects instead of strings. JavaScript currently does not have a dictionary, but other languages do. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const o = {test:"test"};
const f = function(w) {zog(w)};
const c = new Circle();
const d = new Dictionary();
d.add(o, 1); d.add(f, 2); d.add(c, f);
zog(d.at(o)); // 1
zog(d.at(f)); // 2
d.at(c)("hello"); // hello
d.remove(o); // to clear o
zog(d.length); // 2

EXAMPLE

const d = new Dictionary();
d.add(circle, "one");
d.add(circle, "two");
zog(d.at(circle)); // two - just the latest but "one" is still there
for (let i=0; i<d.length; i++) {
   if (d.objects[i] == circle) zog(d.values[i]); // one then two
}
// note, loop backwards to clear values at a key

EXAMPLE

// with unique property add(key, val) removes the last val at that key
const d = new Dictionary(true);
d.add(circle, "one");
d.add(circle, "two");
zog(d.at(circle)); // two - and now only two is there
for (let i=0; i<d.length; i++) {
   if (d.objects[i] == circle) zog(d.values[i]); // two
}
// note, now d.remove(key) removes that unique entry for the key

PARAMETERS unique (default false) - set to true to only accept a single entry (the last added) for a key METHODS add(object, value) - adds a value that can be retrieved by an object reference if unique is false, this will not overwrite previous entries at the object key if unique is true, this will overwrite previous entries at the object key value is optional and will default to true at(object) - retrieves the last value stored at the object (or returns null if not there) remove(object) - removes the last value at the object from the Dictionary returns boolean success clear() - removes all objects from Dictionary - returns object for chaining dispose() - deletes Dictionary object PROPERTIES type - the type of the object as a string length - the number of items in the Dictionary unique - whether the dictionary will overwrite values (going from false to true will not delete previous values) objects - array of keys values - array of values synched to keys CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Hierarchy(input)

Hierarchy zim class DESCRIPTION A hierarchy is a nested structure for organized data (like XML). For instance, Hierarchy manages the accordion feature of ZIM List() where the list can be expanded and collapsed to show nested sections. HOW IT WORKS There are two formats that can be used as input. Each will create a data property in final hierarchy format. A. The SIMPLE input is an easier format to write but has a limitation in that identifiers must be strings. The Hierarchy replaces the identifiers with sequential ids and stores the original identifiers as an obj property. B. The COMPLEX input starts off like the final hierarchy data which has the advantage of storing any type of object in the hierarchy. The disadvantage is the ids must be hand coded and it is longer. The Hierarchy will add level, open and opened properties and create the data property in final hierarchy format. STRATEGY The complex format is tricky. One way to deal with it is to pass in a SIMPLE string version. Then replace the strings with final objects in the data property. The Hierarchy class is used internally by ZIM so may not be needed. However, it will help for custom tree menus, mindmaps, etc. As of ZIM 014 Hiearchy data can be edited using insertBefore(), insertAfter(), replaceItem() and removeItem() If used for a List, then the List can be recreated with the new data See: https://zimjs.com/014/hierachy.html NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE - SIMPLE INPUT

let simple;

// 1. Here is linear input as an array - a boring tree - more like grass!
simple = [1,2,3,4]; // so we would probably not use Hierarchy for this.

// 2. To hold nested data we use an object literal.
// The properties can hold linear arrays as values
// but if any of the values need to hold more values then use an object literal:
simple = {
   "linear":[1,2,3,4], // an array is okay as all items are leaf nodes (end nodes)
   "nested":{ // an object literal is required as one or more items hold other items
      "A":[], // this holds nothing (a leaf node) but still needs an empty array
      "B":["one", "two", "three"], // this holds a linear list - all leaf nodes
      "C":{ // this holds another nested list where at least one item holds more
      "LEAF":[],
      "LINEAR":[1,2,3,4],
      "LEAF":[]
      }
   }
}

// If EXTRA info is desired this can be handled like so:
// Set the values as a list property of an object and add any extra properties desired
// The extra property does not have to be called extra and there can be multiple extra properties
// Avoid calling the properties list, obj, level, open or opened.
// The extra properties will be added to the complex data objects (see below)

simple = {
   "linear":{list:[1,2,3,4], extra:"val"},
   "nested":{list:{ // an object literal is required as one or more items hold other items
      "A":[], // this holds nothing (a leaf node) but still needs an empty array
      "B":["one", "two", "three"], // this holds a linear list - all leaf nodes
      "C":{ // this holds another nested list where at least one item holds more
      "LEAF":[],
      "LINEAR":[1,2,3,4],
      "LEAF":[]
      }
   }, extra:"val"}
}


// pass the object into the input parameter:
const hierarchy = new Hierarchy(simple);
const data = hierarchy.data;

// data will be the following - note it is a more complex format
// but also a form that could hold any type of data as a value
// note the level matches the indent and all values have an id
data = {
   id0:{obj:"linear", level:0, open:false, opened:false, list:{
      id1:{obj:1, level:1},
      id2:{obj:2, level:1},
      id3:{obj:3, level:1},
      id4:{obj:4, level:1}
   }, extra:"val"},
   id5:{obj:"nested", level:0, open:false, opened:false, list:{
      id6:{obj:"A", level:1},
      id7:{obj:"B", level:1, open:false, opened:false, list:{
         id8:{obj:"one", level:2},
         id9:{obj:"two", level:2},
         id10:{obj:"three", level:2}
      }},
      id11:{obj:"C", level:1, open:false, opened:false, list:{
         id12:{obj:"LEAF", level:2},
         id13:{obj:"LINEAR", level:2, open:false, opened:false, list:{
            id14:{obj:1, level:3},
            id15:{obj:2, level:3},
            id16:{obj:3, level:3},
            id17:{obj:4, level:3}
         }},
         id18:{obj:"LEAF", level:2}
      }}
   }, extra:"val"}
}

EXAMPLE - COMPLEX INPUT

// Here is a sample of passing in the more complex format.
// level, open, opened properties are not required
// they will be added by the Hierarchy.
// Note that there are no arrays in this data format so that each item has an id.
// This could be passed in to the data property of List
// to show an expandable hierarchy of objects rather than strings converted to buttons
const complex = {
   id0:{obj:new Rectangle(), list:{
      id1:{obj:new Triangle()},
      id2:{obj:new Triangle()},
      id3:{obj:new Triangle()}
   }},
   id4:{obj:new Circle(), list:{
      id5:{obj:new Button()},
      id6:{obj:new Button(), list:{
         id7:{obj:new CheckBox()},
         id8:{obj:new CheckBox()},
      }},
      id9:{obj:new Button(), list:{
         id10:{obj:new Label("Leaf")},
         id11:{obj:new Label("Nest"), list:{
            id12:{obj:1},
            id13:{obj:2},
            id14:{obj:3},
            id15:{obj:4},
         }},
         id16:{obj:new Label("Leaf")}
      }}
   }}
};
const hierarchy = new Hierarchy(complex);
const list = new List({list:hierarchy.data, align:CENTER}).center();

PARAMETERS input (default null) - a simple formated input - see the examples this will be turned in to a more complex object literal available as the data property OR input a complex formated input - similar to the data property output but only ids, obj and list properties are required. The main purpose of Hierarchy is to create the complex data object but passing in a complex format allows objects other than strings to be used. METHODS processSimple(input) - enter simple input - returns a Hierarchy data object literal this is what the Hierarchy does when a simple input is provided to make its data property the input must be in the simple format as described in the SIMPLE example. processComplex(input) - enter complex input - returns a Hierarchy data object literal this is what the Hierarchy does when complex data is provided to make its data property processComplex will add level, open, and opened properties to the data otherwise data must be in the same format as the final data property - see COMPLEX example getLinearList(list) - enter final list from the data format, to get a linear list of top level objects and all open list objects within according to the open property getLinearIds(list) - enter final list from the data format, to get a linear list of top level ids and all open lists ids within according to the open property getData(id) - find the final data format for a given Hierarchy ID - eg. id0, id12, etc. pass the data.list to the getLinearList() and getLinearIDs() methods getNextSibling(id) - gets the id of the next sibling - skipping ids of any children will find parents next sibling if last child in parent or undefined if last child in hierarchy getPrevSibling(id) - gets the id of the previous sibling - skipping ids of any children will find the parent if first child in parent or undefined if first child in hierarchy getParent(id) - gets the parent object of the item at the id or null if no parent insertBefore(items, id, innerItems) - insert item or an array of items before an id with optional children this will insert at the same level as the id - also see insertAfter() can pass in an array for items such as ["TEST", "TEST2"] can pass in a third parameter for children of a single item The third parameter can also be an array but if there is a third parameter and if the first parameter is a list then it only uses the first item in the list as the parent for the third parameter. insertAfter(items, id, innerItems) - insert item or an array of items after an id with optional children this will insert at the same level as the id - also see insertBefore() can pass in an array for items such as ["TEST", "TEST2"] can pass in a third parameter for children of a single item The third parameter can also be an array but if there is a third parameter and if the first parameter is a list then it only uses the first item in the list as the parent for the third parameter. replaceItem(item, id) - replace the current item at the id with the provided item removeItem(id) - remove the item at the id PROPERTIES data - a hierarchy formated object literal with ids that hold object literals ids are in the format of id0, id1, id2, etc. numbered in order of creation (top to bottom) the object literals have obj, level, open, opened and list properties leaf nodes (end nodes) will have {} as its list property value length - read only total length of all nodes CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Pick(choices)

Pick zim class HISTORY Pick was originally zik() and ZIM VEE (introduced in ZIM 5) throughout the ZIM documentation It was so handy that a general (non ZIM centric) name has been given to a class that can be used by other libraries and languages. See https://github.com/danzen/Pick for the complete general code and description DESCRIPTION Pick() provides a system to handle dynamic parameters. It does so by providing formats for options and a choose() method to pick from the options. For example, a particle emitter has an obj parameter to receive what type of particle to emit. If a particle were randomly chosen from a rectangle, circle or triangle and passed into obj then the emitter would only emit the randomly chosen particle - say, a bunch of triangles. What is desired is that the emitter emit rectangles, circles and triangles randomly. Pick() provides a way to pass in all three shapes and have the emitter choose each time it emits. FORMATS The Pick() formats handle: 1. a random selection: [blue, green, yellow] - array format 2. a random range: {min:10, max:30} - range object format (plus integer and negative) 3. a series: series(10,20,30) - series format also Pick.series() 4. a function result: function(){return new Date().minutes} - function format 5. a normal value: 7 or "hello" - single-value format 6. a noPick object: {noPick:["real", "array"]} - escape format 7. a combination: [{min:10, max:20}, 30, 40] - combination format (recursive) NOTE the range format gets passed to ZIM rand() directly so see docs there there are also integer and negative parameters both defaulting to false PICK LITERAL Formats are passed in to a Pick() object and the Pick object can be passed to a class or function parameter In ZIM, the formats may be passed directly into the class or function parameter (as a Pick literal) new Circle(new Pick([10,20]), red); // Pick() new Circle([10,20], red); // Pick Literal ** The literal can run into conflicts such as for a ZIM corner parameter which accepts an array [] This would be avoided with a system always using Pick() and never the literal. But... ZIM started off without the formalized Pick - and the literal is shorter ;-) The conflict can be resolved by using {noPick:[]} and then the array is not picked from. NOTE Pick is used internally by by zim.interval, zim.animate, zim.Emitter, zim.Pen, etc. as well as ZIM STYLE and ZIM Shape basic parameters handy for cloning with Tile, Emitter, etc. EXAMPLE

let loopCount, choice;

loopCount = new Pick([1,2,3]);
choice = Pick.choose(loopCount); // 1, 2, or 3

loopCount = [1,2,3]; // Pick literal
choice = Pick.choose(loopCount); // 1, 2, or 3

choice = Pick.choose([1,2,3]); // 1, 2, or 3

const rotation = {min:10, max:20, integer:false, negative:true};
// an example of a Range object - this will give values between -20 and -10 or 10 and 20
// rotation now holds an object as to how to pick its value
// this can be passed into a zim.Emitter() for instance
// which will make multiple copies and rotate them based on Pick.choose()
// or this can be passed into an animation object
// and then into zim.Emitter() for the animate parameter

const emitter = new Emitter({
   obj:new Rectangle(),
   random:{rotation:rotation} // the emitter will use Pick.choose() to pick a rotation for each particle
}).center();

function age() {
   // assuming user.age is some input value that exists
   if (user.age >= 18) return ["a", "b", ["c","d"]];
   else return ["e", "f"];
}
// below will be a, b, c or d if user is 18+ with a and b having more of a chance
// or e or f if not over 18
const show = Pick.choose(age);

// below we randomize the tile colors in the first example
// and make them in color order for the second example
new Tile(new Rectangle(10,10,[blue, red]), 10, 10).center(); // would randomize colors
new Tile(new Rectangle(10,10,series(blue, red)), 10, 10).center(); // would alternate colors

// here we pass an array through without processing the array:
Pick.choose({noPick:[1,2,3,4,5]}); // result is [1,2,3,4,5]

// a range between one and three seconds - repeating after 3 choices
const pick = new Pick({min:1, max:3}).num(3);
interval(pick, function () {console.log("calling");}); // eg. 2.5s, 2.7s, 1.2s, 2.5s, 2.7s, 1.2s, etc.

PARAMETERS choices - any of the ZIM Pick formats: 1. an array of choices to choose from randomly 2. a range object with min and max (integer and negative) properties 3. a zim.series() or Pick.series() to pick objects in order 4. a function that returns a result 5. a single not one of the above that passes through 6. an escape object with a noPick property 7. any combination of the above to pick recursively METHODS num(number) - a chainable method to limit the number of options until Pick.choose() will repeat like a series loop(number, call(value, index, total)) - a way to loop through options number is the number of times to loop call is a callback function that gets called each loop the callback will recieve a value (the choice), the index of the loop and the total (the number parameter) inside the function a return is like a continue and a return of any value is like a break in traditional for loops. STATIC METHODS Pick.choose(Pick Object or Pick Literal) - gets a value from the Pick object or Pick Literal so chooses from a random array, or range, or gets the next in the series, etc. Pick.rand(a, b, integer, negative) - gets a random number - same as zim.rand() a - the first Number for the range if a and b are not provided, rand() acts like Math.random() if parameter b is not provided, rand will use range 0 to and including a b - (default 0) second Number for the range it does not matter if a>b or a<b integer - (default true) set to false to include decimals in results if false, range will include decimals up to but not including the highest number if a or b have decimals this is set to false negative - (default false) includes the negative range as well as the positive Pick.series(array|item1, item2, item3, etc.) - same as zim.series() returns a function that can be called many times each time returning the next value in the series (eventually looping) array|item1 - the first item - or an array of results that will be called in order as the resulting function is called item2 - the second item if the first is not an array item3 - the third item, etc. to as many items as needed Pick.getMinMax(ZIM VEE value) - returns a {min:val, max:val} object with the min and max values the ZIM VEE value can return or null, null if not numbers or the ZIM VEE is a function This will work for a range object {min, max}, an array of number [] or a series() of numbers PROPERTIES type - the type of object as a String choices - a reference to the choices object provided as the Pick(choices) parameter CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

scrollX(num, time)

scrollX zim function DESCRIPTION This function gets or sets how many pixels from the left the browser window has been scrolled. If num is provided then the function scrolls the window to this x position. If num and time are provided it animates the window to the x position in time milliseconds. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// hide the logo if the page is scrolled left more than 200 pixels
if (scrollX < -200) zss("logo").display = "none";

PARAMETERS num - (default null) optional scroll position to go to (probably negative) time - (default 0) time in seconds to take to go to the num position (also see ZIM TIME constant) RETURNS a Number CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

scrollY(num, time)

scrollY zim function DESCRIPTION This function gets or sets how many pixels from the top the browser window has been scrolled. If num is provided then the function scrolls the window to this y position. If num and time are provided it animates the window to the y position in time milliseconds. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// animate the scroll position down 100 pixels in half a second
scrollY(scrollY()-100, .5);

CLOSE ▲

windowWidth()

windowWidth zim function DESCRIPTION Returns the width of a window. (window.clientWidth or window.innerWidth) NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

if (windowWidth() < 500) zss("related").display = "none";

RETURNS a Number CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

windowHeight()

windowHeight zim function DESCRIPTION Returns the height of a window. (window.clientHeight or window.innerHeight) NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

if (windowHeight() > 1000) zgo("big.html");

RETURNS a Number CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

browserZoom()

browserZoom zim function DESCRIPTION Returns the browser zoom relative to starting zoom. For example, will return 2 if zoomed twice as big as starting zoom and will return .5 is zoomed half as big as starting zoom. Note: this always returns 1 at the start regardless of the starting browser zoom. This is changed by CTRL+, CTRL-, CTRL scroll wheel or the zoom menu, etc. It is really just comparing the difference of the devicePixelRatio. The function is used internally by ZIM Tag(), TextArea() and Loader(). NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

Ticker.add(()=>{
   zog(browserZoom()); // 1 at start then changes depending on browser zoom
});

RETURNS a Number CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

getQueryString(string)

getQueryString zim function DESCRIPTION Turns the HTML query string into a object. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// currentHTML page myPage.html?party=true&toys=many
const details = getQueryString();
zog(details.party); // "true"
zog(details.toys); // "many"
loop(details, (key, val, i)=>{
   zog(key, val, i);
});
// outputs:
// party true 0
// toys many 1

EXAMPLE

// an array of values is created if a query string has multiple properties with the same name:
const collection = getQueryString("type=dog&age=10&age=20&age=30");
zog(collection.age); // [10,20,30]

PARAMETERS string - (default null) null will get string from end of HTML page after ? set the key value pairs (without question mark) to parse a custom string eg. party=true&toys=many RETURNS an object literal with properties matching the keys and values matching the values (or undefined if no query string) CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

swapHTML(idA, idB)

swapHTML zim function DESCRIPTION Pass in two tag ids as strings and this function will swap their innerHTML content. The content (including nested tags) will be swapped. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// exchanges the content of two divs called question and answer
swapHTML("question","answer");

PARAMETERS idA, idB - String names of the tag id with which to swap innerHTML values RETURNS Boolean indicating success CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

urlEncode(string)

urlEncode zim function DESCRIPTION Matches PHP urlencode and urldecode functions for passing data on end of URL. NOTE only encode values of key=value pairs (not keys and not both keys and values) NOTE JSON automatically encodes and decodes - except maybe & NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const motto = "good = life & life = now";
zgo("submit.php?motto="+urlEncode(motto));

PARAMETERS string - a value to URL encode (space to plus, etc.) RETURNS a String CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

urlDecode(string)

urlDecode zim function DESCRIPTION Matches PHP urlencode and urldecode functions for receiving raw data from a source that URLencodes. NOTE JSON automatically encodes and decodes NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const pairs = command.split("&");
const motto = urlDecode(pairs[0].split("=")[1]);

PARAMETERS string - a URLencoded String to decode RETURNS a String CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

setCookie(name, value, days)

setCookie zim function DESCRIPTION Sets an HTML cookie to remember some user data your site has set over time. If no days, it will be a session cookie (while browser is open). NOTE cookies may not work unless files are on a server NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const visits = getCookie("visits");
if (zot(visits)) visits = 0;
setCookie("visits", ++visits);

PARAMETERS name - a String name for your cookie value - a String value that you want to store days - (default 0) for how many days do you want to store the cookie ALSO see getCookie and deleteCookie RETURNS a Boolean indicating success CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

getCookie(name)

getCookie zim function DESCRIPTION Gets an HTML cookie that you have previously set. NOTE cookies may not work unless files are on a server NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const visits = getCookie("visits");
if (zot(visits)) visits = 0;
setCookie("visits", ++visits);

PARAMETERS name - the String name of your stored cookie ALSO see setCookie and deleteCookie RETURNS a String or undefined if not found CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

deleteCookie(name)

deleteCookie zim function DESCRIPTION Deletes an HTML cookie. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

deleteCookie("visits"); // clears the cookie

PARAMETERS name - the String name of your stored cookie to delete ALSO see setCookie and getCookie RETURNS a Boolean indicating success CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

zog(item1, item2, etc.) ~ log

zog global function DESCRIPTION Short version of console.log() to log the item(s) to the console. Use F12 to open your Browser console. zog is dedicated to Pragma (Madeline Zen) who was coding with Dr Abstract (Dan Zen) from the start Also comes in six ZIM colors: zogg("green"); zogp("pink"); zogb("blue"); zogr("red"); zogy("yellow"); zogo("orange"); Note: If zon (comments on) is set to false before ZIM runs, then all zog() commands are turned off EXAMPLE

zog("hello"); // logs hello to the console

EXAMPLE

const circle = new Circle().center();
zogb(circle); // logs the circle object to the console with a blue Z marker

EXAMPLE

const x = 10;
const y = 20;
zogo(x, y); // 10 20 with an orange Z marker

PARAMETERS item1, item2 (optional), etc. - items (expressions) to log to the console RETURNS items it is logging separated by a space if more than one CLOSE ▲PAGE ▤CODE ▤BITS

CLOSE ▲

zid(string) ~ id

zid global function DESCRIPTION Short version of document.getElementById(string) to access an HTML tag by its id. EXAMPLE

zid("logo").addEventListener("click", ()=>{});

PARAMETERS string - the id of the tag you are wanting to access RETURNS HTML tag with id of string or null if not found CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

zss(string) ~ css

zss global function DESCRIPTION Short version of document.getElementById(string).style to access the style property of an HTML tag by the tag id. EXAMPLE

zss("logo").margin = "10px";

PARAMETERS string - the id of the tag whose style you are wanting to access RETURNS style property of HTML tag with id of string or undefined if not found CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

zgo(url, target, width, height, fullscreen, modal) ~ go

zgo global function DESCRIPTION Short version of either window.location.href or window.open to open a link in the same window or a specified window. EXAMPLE

zid("logo").addEventListener("click", ()=>{zgo("https://zimjs.com");});

// with a ZIM object:
const button = new Button();
button.center();
button.on("click", ()=>{zgo("https://zimjs.com");});

EXAMPLE

// all on one line and open url in new tab
new Button().center().tap(()=>{zgo("https://zimjs.com", "_blank");})

PARAMETERS url - the link to use (Absolute, Relative or Virtual) target - (default null) the string name of a window (tab) _blank for new window each time width - (default null) width of window (use with fullscreen true) height - (default null) height of window (use with fullscreen true) fullscreen - (default null) not really full screen but rather opens in a new window not tab modal - (default false) set to true to force user to close window RETURNS null if opening in same window or reference to the window otherwise CLOSE ▲PAGE ▤CODE ▤BITS

CLOSE ▲

zum(string) ~ num

zum global function DESCRIPTION Takes the units off a string number. Converts "10px" string from styles to number 10, for instance. If there is no value then this will return 0. EXAMPLE

// in HTML
<div id="logo" style="position:relative; left:10px">LOGO</div>

// in JavaScript
let left = zum(zss("logo").left); // converts 10px to the Number 10
left += 20; // adds 20 to 10
zss("logo").left = left + "px"; // assigns 30px to left style

PARAMETERS string - the string representation of a number eg. "10px" RETURNS a Number CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

zot(value) ~ not

zot global function DESCRIPTION Test to see if value has no value (value must exist as var or parameter) or if value has been set to null. Good for setting function defaults. Really just asking if the value == null. Often we forget exactly how to do this - it is tricky: value === null, value == undefined, value == 0, !value DO NOT WORK. EXAMPLE

if (zot(width)) width = 100;
// equivalent to
if (width == null) width = 100;

PARAMETERS value - a variable or parameter you want to see if there is no value assigned RETURNS Boolean true if value does not exist CLOSE ▲PAGE ▤CODE ▤BITS

CLOSE ▲

zop(e) ~ stop

zop global function DESCRIPTION Stop event propagation to subsequently added existing listeners. Must pass it e || window.event from your event function. NOTE this is not canceling the default action - to cancel default action use e.preventDefault(); EXAMPLE

zid("button").addEventListener("click", e=>{
   // do something
   zop(e||window.event);
});

PARAMETERS e - the event object from your event function collect the event object as e and then pass in e || window.event RETURNS null CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

zil() ~ still

zil global function DESCRIPTION Stop keys from moving content - arrows, spacebar, pgup, pgdown, home, end. Stop scroll wheel from moving content - scrolling the canvas for instance. ZIM Frame does this in the full, fit and outside scale modes. If not using Frame, then you can do this once at the start of your code. Returns an array of references to three listeners: [keydown, wheel and DOMMouseScroll]. Use these to removeEventListeners. Also stores these on Window at window.zilK, window.zilW, window.zilS. The arrows, etc, still work but just not their default window behaviour. EXAMPLE

// at the top of your code
let listenersArray = zil();
// key and mousewheel arrows, spacebar, etc.
// will have their default actions stopped until you remove the listeners:
// window.removeEventListener("keydown", listenersArray[0]); // etc.

RETURNS an Array CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

zet(selector, first) ~ set

zet global function DESCRIPTION Uses document.querySelectorAll() to get a list of tags. Returns a ZIM Zet object which can be used to add events or styles to the set. EXAMPLE

zet(".class").on("click", ()=>{}); // would add function event to all tags with the class
zet("p").css("color", "goldenrod"); // would make the text of all paragraphs goldenrod
zet("#test").css({color:"red", "background-color":"blue", paddingLeft:"20px"});

// set a custom open property on all section bars to false
zet("section .bar").prop("open", false);
// set the custom open property on all section bars to true and set the innerHTML to CLOSE
zet("section .bar").prop({open: true, innerHTML: "CLOSE"});

PARAMETERS selector - a CSS query selector such as a class, id, tag, or multiple selectors separated by commands can also be complex selectors suchs as ".class img" first - get the first occurance only of the set METHODS (on the returned Zet object) zet(selector).on(type, function) - a shortcut for addEventListener() and will be added to all tags matching the selector zet(selector).off(type, function) - a shortcut for removeEventListener() and will be remove from all tags matching the selector zet(selector).css(property, value) - gets and sets styles - gets the first programmatic property if a single string property is passed - sets the property to the value on each of the Zet's tags from the selector passed to zet() - if an object of properties and values is passed as the single parameter then sets all these properties - NOTE: style names do not need quotes unless the dash is used - so camelCase does not require quotes - NOTE: remember that commas are used for objects - not the semi-colon as in CSS zet(selector).prop(property, value) - gets or sets a property on a set of tags - if an object of properties and values is provided as a single parameter, then sets all these on the set - else if no value is set then returns an array of the set tags values for the property - else if value is a single value then sets the property of the tags in the set to the value PROPERTIES (on the returned Zet object) tags - an HTML NodeList tag list RETURNS Zet object with on(), off(), css() methods and tags property (NodeList tag list) CLOSE ▲PAGE ▤CODE ▤BITS

CLOSE ▲

zob(func, args, sig, scope) ~ object

zob global function DESCRIPTION A system to build functions or classes that allow traditional parameters or a configuration object passed in as a single parameter. The configuration object has property names that match the function arguments. To use zob on your own functions, pass in a function and the function's arguments and insert zob into first line of your function as shown below. Replace yourFunction with a reference to your function but keep arguments as is. NOTE in ES6 classes when extending a ZIM class, do not use ZIM DUO when passing in parameters to super() or else the methods might be obscured. EXAMPLE

function test(a,b,c){
   let duo; if (duo = zob(test, arguments)) return duo;
};
test(1,null,3); // traditional parameters in order
test({a:1,c:3}); // configuration object with zob

NOTE if you are running the function as a constructor with the new keyword then you need to pass in this (keyword) as the last parameter (sig can be null) this allows zob() to test to see if we need to rerun the function as a constructor EXAMPLE

let duo; if (duo = zob(yourFunction, arguments, sig, this)) return duo;

NOTE if using an ES6 Class or minifying the file then you need to do an extra step add a string version of the signature of your function above the duo call then pass the signature in as a parameter to zob() EXAMPLE

class Test extends Container {
   constructor(a=1,b=2,c=3) {
      super();
      const sig = "a,b,c";
      let duo; if (duo = zob(Test, arguments, sig, this)) return duo;
   }
}

many of the ZIM functions and classes use this "DUO" technique the documentation for parameters will tell you if they support DUO works also with JS6 default parameter values PARAMETERS func - reference to the function you want to use params or a config object with args - reference to the arguments property of the function (literally, use "arguments" with no quotes) sig - (default null) a string listing of the parameters just how they are in the () not including the () required if you are minifying the file as minifying changes the signature scope - (default null) reference to this (litterally, use "this" without the quotes) required if the function is being run with the new keyword RETURNS um... a Boolean CLOSE ▲PAGE ▤CODE ▤BITS

CLOSE ▲

zik(Array|function|object|Pick) ~ pick

zik global function DESCRIPTION - DEPRECIATED as of ZIM 10 Has now been replaced with ZIM Pick() class which formalizes zik() and ZIM VEE into a more general class. See ZIM Pick() under the Code module Classes. CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

zta(item1, item2, etc.) ~ table

zta global function DESCRIPTION Short version of console.table() to log the Arrays or Objects to the console as a table Use F12 to open your Browser console. Note: if zon (comments on) is set to false before ZIM runs then all zta() commands will be turned off EXAMPLE

zta(["will", "this", "wind"]); // logs as a table

PARAMETERS item1, item2 (optional), etc. - Arrays or Objects to log to the console RETURNS items it is logging CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

zor(item1, item2, etc.) ~ or

zor global function DESCRIPTION picks the first non-null defined item so WILL pick a 0 EXAMPLE

const a = 0;
const x = zor(a,10); // x is 0
const y = zor(x,10); // y is 0
// note:
const z = a||10; // z is 10
const c;
const w = zor(c,a,20); // w is 0

PARAMETERS item1, item2 (optional), etc. - objects to test in order RETURNS first non-null defined item or undefined if no valid items CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

DISTILL

distill zim constant DESCRIPTION Distill allows you to track which functions you are using in your app and create a custom minified js file with just those functions. Set DISTILL to true to record which functions your are using in your app - default is false. While running your app, call the distill() function take the results to https://zimjs.com/distill to create a minified distilled file. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// at the start of your code
DISTILL = true;

// at the end of your code (once everything has run)
// this means we may have to wait for events to happen, etc.
distill();

// this will log to the console a series of numbers
// separated by spaces representing the functions used

1 6 81 81 79 75 77 75 55 54 52 53 55 54 52 53 55 54 52
53 42 80 74 46 46 46 80 74 46 46 46 55 54 52 53 55 54
52 53 55 54 52 53 42 80 74

// copy these into the zim DISTILL form field
// to get the minified JavaScript for these functions
// NOTE: Distill will not duplicate the functions
// data duplication is left in for statistical purposes

CLOSE ▲PAGE ▤CODE ▤BITS

CLOSE ▲

distill()

distill zim function DESCRIPTION Call the distill function to display which zim functions you are using in your app. You must set DISTILL constant to true before using (set at the start of your app). After running through your app, call distill() and see the console (F12). Take the results to https://zimjs.com/distill to create a minified distilled js file. You would then host this js file yourself or include it in your mobile files, etc. NOTE distill() only records functions that have been used so you may have functions still to be used in your app. You will want to make sure you call distill() after you have used all your functions, for instance, on a restart event, etc. NOTE distill() will not be available from your distilled file. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// at the start of your code
DISTILL = true;

// at the end of your code (once everything has run)
// this means we may have to wait for events to happen, etc.
distill();

// this will log to the console a series of numbers
// separated by spaces representing the functions used

1 6 81 81 79 75 77 75 55 54 52 53 55 54 52 53 55 54 52
53 42 80 74 46 46 46 80 74 46 46 46 55 54 52 53 55 54
52 53 55 54 52 53 42 80 74

// copy these into the zim DISTILL form field
// to get the minified JavaScript for these functions
// NOTE: Distill will not duplicate the functions
// data duplication is left in for statistical purposes

CLOSE ▲PAGE ▤CODE ▤BITS

CLOSE ▲

parseAudioSprite(audioSpriteData, outputAudioSprite)

parseAudioSprite zim function DESCRIPTION Converts an AudioSprite data file from a popular AudioSprite Creation Tool: https://github.com/tonistiigi/audiosprite To a CreateJS AudioSprite data format to use with Frame loadAssets(). NOTE only gets the first file from the output and ignores loop and autoplay properties To loop a sound, use new Aud(id).play({loop:-1}); NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// loading JSON data for audio is two step process.
// load the JSON then load the Audio with the converted loaded JSON data
// NOTE - do not have two frame complete events active at the same time!
// unless you assign the loadAssets() to a variable (ZIM Queue) and put the complete events on the variable
F.loadAssets("audioSprite.json", "assets/");
F.on("complete", init, null, true); // run this complete event only once (the true)

function init() {
   // convert imported data to CreateJS AudioSprite data:
   const audioSpriteData = parseAudioSprite(asset("audioSprite.json"));

   // load the audio using the converted data
   F.loadAssets(audioSpriteData, "assets/");
   F.on("complete", ()=>{

      // now all the AudioSprite ids are available
      new Aud("start").play();

   });
}

PARAMETERS audioSpriteData - an object (not JSON) made from parsed JSON data from https://github.com/tonistiigi/audiosprite example: {"resources": ["audiosprite.mp3"], "spritemap": { "blackball": {"start": 1.041, "end": 2.475, "loop": false}, "bounce": {"start": 3.567, "end": 4.232, "loop": false} }} outputAudioSprite - (default false) output to the console the converted CreateJS AudioSprite data NOTE: this is in JSON format so will have to JSON.parse() the console text - wrap it in single quotes as they are stripped by the console RETURNS - a CreateJS AudioSprite data object CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

previewAudioSprite(audioSpriteData, numLetters, frame)

previewAudioSprite zim function DESCRIPTION Creates a ZIM Tabs object with all the audioSprite sounds in each tab sound names are shortened to numLetters Assumes that the AudioSprite is loaded - see docs on F.loadAssets() NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

var zimAudioSpriteData = {
   src:"audiosprite.mp3",
   audioSprite:[
      // [id, startime(s), endtime(s)]
      // prefer this when making audioSprites by hand in Premiere or Audition
      ['noStar', 1.041, 2.475],
      ['bounce', 3.567, 4.232],
      ['deleted', 5.396, 9.315],
      ['click', 10.373, 10.499],
      ['noLove', 11.607, 14.254],
      ['happy', 15.672, 17.081],
      ['draw', 18.354, 19.163],
      ['heart', 20.151, 23.594],
      ['star', 24.931, 27.673],
      ['warning', 28.632, 29.351],
      ['navChange', 30.640, 32.323]
   ]
}
F.loadAssets(zimAudioSpriteData, "assets/");
F.on("complete", ()=>{
   // will show tabs at top of stage - press to play audio
   previewAudioSprite(zimAudioSpriteData, 2);
   S.update();
});

PARAMETERS audioSpriteData - an AudioSprite object of ZIM, CreateJS or from JSON parsed https://github.com/tonistiigi/audiosprite format numLetters - (default 3) how many letters from the sound name to put on each tab frame - (default zdf) the frame into which the AudioFile is loaded RETURNS - a ZIM Tab which is automatically added to the frame's stage CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

svgToBitmap(svg, callback, width, height, params)

svgToBitmap zim function DESCRIPTION Function to convert SVG to ZIM Bitmap NOTE as of ZIM Cat 04, svg passed into the assets parameter of Frame or loadAssets() will be converted to a Bitmap automatically and available as an asset() prior to ZIM Cat 04 it was available as SVG as an asset and would need to be converted with svgToBitmap() The original SVG is available as an svg property on the Bitmap asset. SEE: SVG() under Frame module for new way to load SVG files. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// svg can be a reference to an svg tag on the page zid("svgTagID")
// or an svg string starting with for example:
// var svg = '<svg id="vector" width="500" height="500" xmlns:rdf="https://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns="https://www.w3.org/2000/svg" xmlns:cc="https://web.resource.org/cc/" xmlns:dc="https://purl.org/dc/elements/1.1/" xmlns:svg="https://www.w3.org/2000/svg" viewBox="0 0 312 521" version="1.0">
// SEE: https://zimjs.com/svg for an example

svgToBitmap(svg, bitmap=>{
   bitmap.center().transform();
   S.update()
});

PARAMETERS svg - an SVG tag or SVG string callback - function to call when creation is done width - (default null) - force a width of the Bitmap height - (default null) - force a height of the Bitmap params - (default null) pass an object literal of values, etc. for callback to receive after bitmap RETURNS - null CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

makeContent(content, maxWidth, color, scrollBar)

makeContent zim function DESCRIPTION Function that returns ready-made content for Pane(), Window() and Panel() or can call and add anywhere. Primarily used for confirmation or submission dialogs. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const content = makeContent({
   buttonScale:2,
   buttons:[
      {
         label:"ONE",
         bgColor:blue,
         call:(button)=>{zog(button.text);}
      }, {
         label:"TWO",
         bgColor:green,
         call:(button)=>{zog(button.text);}
      }
   ]
}).center();

PARAMETERS content - the content to make - using one of three formats: a string or number to add a ZIM Label (also see color parameter and property) a ZIM DisplayObject such as a Circle or a Container with more objects, etc. a content configuration object {} with the following properties - any are optional: header - a ZIM DisplayObject for the top of the content message - text that will put into a ZIM Label default color white display - a ZIM DisplayObject for beneath the message buttons - an array of ZIM Button objects or configuration objects {} as follows: {label, color, rollColor, backgroundColor, rollBackgroundColor, call} with call being a callback function for when the button is pressed buttonScale - the scale for the buttons color - the color of the message spacingH - horizontal space between the buttons (default 20xbuttonScale) spacingV - vertical space between the content areas (default 20) scrollBar - set to true if a default scrollBar is present in Window or a number if custom align - default CENTER, or use LEFT or RIGHT maxWidth - (default null) pass in a maximum width to keep scale the content to color - message color - also see color as property of content config object {} PROPERTIES *** if the content is a content configuration object then the following properties are added the created content config - the content configuration object provided header - a ZIM DisplayObject from the top if provided message - a ZIM Label from the message if provided text - the text of the message if provided display - a ZIM DisplayObject for beneath the message if provided buttons - an array of ZIM Button objects or configuration objects {} as follows: {label, color, rollColor, backgroundColor, rollBackgroundColor, call} with call being a callback function for when the button is pressed all if provided RETURNS - a Label if a string or number is passed as content, a Container if a content config {} is passed or the content if something else is passed CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

zimify(obj, a, b, c, d, list)

zimify global function DESCRIPTION Function to add display methods like drag, hitTests, move, animate, center, etc. to an object. Also adds width, height, widthOnly and heightOnly properties. The term "members" is used because we are adding both methods and properties. All the ZIM 4TH display objects come with these members BUT... the native CreateJS display objects do not. When we import assets from Adobe Animate, these are native CreateJS objects. So we can use zimify() to add these members to a CreateJS Shape, Container, etc. NOTE this was formerly zim.addDisplayMembers (which has been replaced by zimify) ZIM uses zimify internally to add the members to the ZIM shapes and components (Rectangle, Circle, Triangle, Label, Button, etc.) as applied through the ZIM Container inheritance as well as to the ZIM wrappers for CreateJS Container, Shape, Sprite, MovieClip objects. The display methods call the original ZIM functions passing the object parameter as the first parameter or if DUO is being used then adds the object to the configuration object. Also adds common ZIM DisplayObject properties such as: width, height, widthOnly, heightOnly, level, depth, blendMode draggable, name, hue, saturation, brightness, contrast hueBatch, saturationBatch, brightnessBatch, contrastBatch and perhaps more - see zim.displayBase() EXAMPLE

const cjsShape = new lib.Shape1(); // include the js from Adobe Animate
zimify(cjsShape, 200, 300); // or 0,0,200,300, for x, y, width, height of bounds
cjsShape.center();
cjsShape.drag();

// otherwise would have to use:
zim.center(cjsShape, stage);
zim.drag(cjsShape); // etc.

EXAMPLE

const shape = new createjs.Shape();
shape.graphics.beginFill(red).drawRect(0,0,200,200);
// need to either setBounds() or pass in dimensions
zimify(shape, 200, 200); // add methods like center, drag, etc.
shape.center(); // ZIM 4TH method format
S.update();

// note: even without using zimify()
// we can use the traditional zim.center() function
var shape = new createjs.Shape();
shape.graphics.beginFill(red).drawRect(0,0,200,200);
shape.setBounds(0,0,200,200); // need to set bounds to center
zim.center(shape, stage); // use the zim function rather than the method
S.update();

// of course we can just use a zim.Shape
// then the methods like center, drag, etc. are already added
var shape = new Shape(200, 200).f(red).dr(0,0,200,200).center();
S.update();

// in this case, we may have well used a Rectangle ;-)
var shape = new Rectangle(200, 200, red);
shape.center();
S.update();

PARAMETERS obj - the object to add the methods and properties to (probably a CreateJS display object) a,b,c,d - optional bounds - if the bounds are not already set then provide them here if only a and b are provided then these are width and height with x, y at 0 if a, b, c, d are provided then these are x, y, width, height of the bounds note: on Adobe Animate MovieClips, the objects are stored in a container and zimify() will automatically zimify the container and set its width and height to stage width and height and bring the container to the top() list - Boolean used internally by zimplify to exclude zim methods (makes zimify return list of methods) RETURNS - obj for chaining CLOSE ▲PAGE ▤CODE ▤BITS

VIDS

CLOSE ▲

zimplify(exclude)

zimplify global function DESCRIPTION By default, ZIM runs zimplify() so that the zim namespace is not needed. This can be prevented by setting the global variable zns = true before calling ZIM. Then if desired zimplify() can be run manually after ZIM is called. Calling zimplify() removes requirement to use the zim namespace in code Puts the ZIM code, display and controls into the global namespace Does not put methods in the namespace as using methods as functions is discouraged With the exception of loop, stopAnimate, pauseAnimate, animate, wiggle NOTE By default the CDN version of ZIM stores all ZIM classes globally. This will overwrite the JavaScript Blob and Window class. To prevent this, zns can be set to true in a script before zim is imported. Then import zim and at the top of the app script run zimplify(["Window", "Blob"]); at which point ZIM Window and ZIM Blob would need the zim namespace but the other classes would need no namespace and the JavaScript Window and Blob would be available as Window and Blob like usual. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// before calling the ZIM script we set the zim namespace to true
// note, by default, zns=false and no zim namespace is needed
<script>zns=true;</script>

// then in the script we would have to use the namespace
const circle = new zim.Circle(50, green);

// calling zimplify() will avoid that:
zimplify();
const circle2 = new Circle(50, green);

// and we can use zim functions directly
const random = rand(500);

// note - do not use:
const rand = rand(500); // as you will overwrite the rand() reference

PARAMETERS exclude - (default null) a String command or an array of command strings to not remove the zim namespace CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

fastFrame(cjs, stage)

fastFrame Function DESCRIPTION It is recommended to use a ZIM Frame or if using Adobe Animate to use the ZIM Shim but if you are just wanting to use some ZIM features and are working primarily with CreateJS or legacy CreateJS code - then just call fastFrame() before using ZIM code. Pass the createjs namespace and the current stage into fastFrame(). fastFrame() will create and return a very light placeholder frame as a zdf and will handle various scaling settings due to ZIM Retina. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// fastFrame is not needed with ZIM Frame or with ZIM Shim
// imagine that CreateJS is imported as createjs - or cjs, etc.
const stage = new createjs.Stage("demoCanvas");
fastFrame(createjs, stage);
new Circle().center().drag(); // center will now default to centering on stage

PARAMETERS createjs - (default null) a reference to the CreateJS namespace stage - (default null) a reference to the CreateJS stage CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

addWires(obj)

addWires Function DESCRIPTION Add wire(), noWire(), wired(), noWired() methods to any object See the methods in docs under DiplayObject methods These can be added to custom objects to wire properties. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

   const slider = new Slider().center();
   const tabs = new Tabs({tabs:["summer", "fall", "winter", "spring"]}).pos(0,0,TOP,RIGHT);
   const data = {size:10, season:"summer"};
   // addWires returns the object data - which will now have the wired method
   // now, when the slider or tabs change the data object will be updated
   // note: we want the slider to be set to the object's start value so set the setSource to "target"
   // note: we want the text of the tabs not the default index so need to provide input property
   addWires(data).wired(slider, "size", null, "target").wired({source:tabs, prop:"season", input:"text"});

PARAMETERS obj - the object to receive the wire and wired methods RETURNS - obj for chainging CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

setBlurDetect()

setBlurDetect Function DESCRIPTION Function to detect browser Window being reduced or set to another tab. Used by animate, interval and timeout to optionally pause these on blur and activate on focus animate uses zim.pauseAnimateOnBlur and the interval and ticker use a zim.pauseOnBlur array As of ZIM Cat 02 (patched) animate uses the target object tweenStates object to determine which animations to start again on focus Used internally by ZIM - if an object has a pause(type) method then can add it to zim.pauseOnBlur array to pause the object on window blur and unpause the object on focus NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// will count when window is not seen
const test = interval(1, obj=>{
   zog(obj.count);
});

EXAMPLE

// will NOT count when window is not seen
const test = interval(1, obj=>{
   zog(obj.count);
}, null, null, null, true);

EVENTS adds a "tabblur" event to the ZIM Default Frame when blurred and a "tabfocus" event to the ZIM Default Frame when focused CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

ZIMONON

ZIMONON (note the extra ON at the end of ZIMON - so ZIMONON) ZIM constant *** this just turns ZIMON on - see docs for ZIMON next! DESCRIPTION Default is false - set to true to record arguments needed for ZIMON.stringify() If not using ZIMON.stringify() then do not set this to true See also Docs for Static Class ZIMON BACKGROUND Arguments are the values passed in to parameters. These are stored in a LOCAL variable called arguments that belongs to the object For ZIMON to stringify an object, it needs to have access to the arguments So ZIMON requires objects to keep a PUBLIC record in an arguments property This can add up in memory when the app has hundreds or thousands of objects For instance, every rectangle, circle and line in a blob control would keep a record of its arguments NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

ZIMONON = true
new Frame({ready});
function ready() {

   const circle = new Circle(100, blue);
   const c = ZIMON.stringify(circle);
   // store string c in localStorage or send to database
   // ZIMON would only make a default circle if ZIMONON were not true

   // we can parse a ZIMON string without needing ZIMONON set to true
   // so if the app only read in a ZIMON string
   // then there would be no reason to set ZIMONON to true
   const cc = ZIMON.parse(cc).center(); // centers a blue circle

}

CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

ZIMON = {}

ZIMON zim static class DESCRIPTION ZIMON stands for ZIM Object Notation It turns any prepared** object to a string using ZIMON.stringify(object) It turns a ZIMON string back into and object using ZIMON.parse(string) The object can be inside an array [] or an object literal {} These can be nested and filled with any type of object (that is prepared**) See https://zimjs.com/zimon/ for an example NOTE must set ZIMONON=true at START of app to record arguments (note the extra ON) it is not that much extra data but it is prudent to conserve memory when not using ZIMON ZIMONON is needed only to stringify(), for parse() it does not matter KEY An optional key object can be used to specify the scope of the class and to specify which properties to store for objects made from a class. The scope must be a string accessible from where you stringify - it can contain dots (.) The key can be passed as the second parameter to ZIMON.stringify(). The key is sent in the ZIMON string and nothing extra is needed when parsing. PURPOSE The purpose is similar to JSON - to save to localStorage or databases or share between languages. Indeed, the final ZIMOM format is JSON. Like JSON, ZIMON can be used outside of ZIM and outside JavaScript if implemented in another language. See https://github.com/danzen/zimon/ for generic JS code to port to other languages. ** PREPARED OBJECTS Any objects NOT supported by JSON must be prepared so objects other than string, number, array, object literal, boolean or null need to have the following: 1. A type property that matches the class name as a string 2. An arguments property that holds an array of the arguments passed to make the object The ZIM Objects are already prepared - so no extra work is required NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const objects = [new Rectangle(100,100,red), new Circle(50, blue)];
const zimon = ZIMON.stringify(objects); // could save in localStorage or send to database

const newObjects = ZIMON.parse(zimon); // makes a Rectangle and Circle in a []
newObjects[0].center();
newObjects[1].center().animate({scale:.5}, 1);
zog(newObjects[0].color); // #fb4758 zim red

EXAMPLE

// pass a key for any properties to remember
const objects = [new Rectangle(100,100,red).alp(.5), new Circle(50, blue).sca(2).loc({x:200,y:200,add:false})];
const key = {Rectangle:{props:["alpha"]}, Circle:{props:["scale", "x", "y"]}};
const zimon = ZIMON.stringify(objects, key); // could save in localStorage or send to database

const newObjects = ZIMON.parse(zimon); // makes a Rectangle and Circle in a []
newObjects[0].center(); // would have alpha .5
newObjects[1].addTo().animate({scale:.5, x:W/2, y:H/2}, 1); // would start at scale 2 and x,y of 100,100

EXAMPLE

// To prepare custom objects:
Custom = function(a, b, c) { // ** global scope
   this.type = "Custom"; // ZIMON uses a type property that matches the class name
   // best to take copy of arguments and turn them into array
   // otherwise any changes to argument values (setting defaults, etc) will be needlessly recorded
   // when ZIMON.stringify() is eventually called
   this.arguments = Array.prototype.slice.call(arguments);
   this.write = function() {console.log(a, b, c);}
}
const c = new Custom("one", "two", "three");
const c2 = ZIMON.stringify(c);
const c3 = ZIMON.parse(c2);
c3.write(); // logs one two three

// ** or save in some namespace or on an object
F.Custom = function(a, b, c) {// same as above}
const c = new F.Custom("one", "two", "three");
// then use key as second parameter to specify scope
const c2 = ZIMON.stringify(c, {Custom:{scope:"frame"}}); // key
const c3 = ZIMON.parse(c2);
c3.write(); // logs one two three

EXAMPLE

// a built-in JavaScript Object:
const date = new Date(1982, 0, 10);
date.type = "Date"; // add date
date.arguments = [1982, 0, 10]; // and manual arguments
const d = ZIMON.stringify(date);
const d2 = ZIMON.parse(d);
zog(d2.getYear()); // 82

STATIC METHODS stringify(obj, key) - supply an object to convert to a ZIMON string the object can be any JSON ready object - string, number, array, object literal, boolean or null the object can be any ZIM DisplayObject - Circle, Blob, Button, Tile, Emitter, etc. the object can be a prepared custom or built in object with a type property of the class name with an arguments property of the arguments - see ** PREPARED OBJECTS above Or any combination of these - ZIMON is recursive so checks parameters, etc. the optional key can be used to specify scope for the class if not in global scope and used to specify which properties should be recorded the key has the following format: {ClassName:{scope:"inScope.nested.etc", props:["prop1", "prop2", "etc"]}, ClassName2:{}, etc.} stringify returns a ZIMON string in JSON format eg.'{"obj":{"zimon":"Rectangle","args":[30,30,"#e472c4"]},"props":[0.3,212,184]},"key":{"Tile":{"props":["alpha","x","y"]}},"zimon":1,"info":"https://zimjs.com/zimon/"}'; parse(string) - pass in the ZIMON string to turn back into an object (or objects within objects) CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

Wonder(wid, client, app, notes, server)

Wonder zim class DESCRIPTION Wonder sends counts, times, and orders to a server for user testing or statistical purposes. Go to https://zimjs.com/wonder/ to get a Wonder ID (wid) and set up Wonder stats with ZIM or make up your own wid and use your own server script to collect data. See the zim Wonder site for the data fields that are sent. NOTE all records at ZIM are archived NEW YEARS DAY and kept for a year after that. Service is provided as is and ZIM and Dan Zen are not responsible for lost data. USAGE count will count things like app loads, button clicks within an app, how many monsters they killed time will tell you the time the user took to do something - like solve a puzzle, or locate the witch order will record the order items were done - which section did they go to first, second, third, etc. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// make a Wonder object
// wonderID is e-mailed to you when you sign up
// client is your client's name that you provide
// app is the app for which you are recording data
// you can also pass an optional note
var wonder = new Wonder("wonderID", "client", "app");

// COUNT EXAMPLE
// for this example we count times a button is pressed
const button = new Button("CLICK").center();
button.on("click", ()=>{
   // records an entry for this keyword in your stats
   // along with date, time, session, etc.
   wonder.count("wow");
});

// TIME EXAMPLE
// assuming we have our Wonder object from above
// (you only need one Wonder object)
// start the timer counting for a keyword called "test"
// this will record nothing until you timeEnd()
// or you timeStart() again
// you can also timePause() and timeUnpause()
// see DOCS for more functionality and information
wonder.timeStart("test");

// add the circle
const circle = new Circle(100, red).center().drag();
circle.on("pressup", function(){
   if (circle.hitTestRect(square)) {
      // if the shapes are hitting then end the timer
      // this will send data to your Wonder report
      wonder.timeEnd("test");
   }
});

// add the square to a random location on stage
const square = new Rectangle(100, "yellow").loc(rand(W-square.width), rand(H-square.height));

// ORDER EXAMPLE
// assuming we have our Wonder object from above
// (you only need one Wonder object)

// make tabs
const tabs = new Tabs(400, 40, ["MOUSE", "CAT", "MONKEY"]);
tabs.index = -1; // start with no selection
let count = 0; // perhaps get the first four presses
tabs.center().change(()=>{
   // record which tab was pressed
   // this gets stored under keyword animal
   wonder.order("animal", tabs.text);
   count++;
   // turn the order recording off for "animal"
   if (count == 4) wonder.orderOff("animal");
});

PARAMETERS supports DUO - parameters or single object with properties below wid - string with your company wonder ID for example z14i46m3z29 this is the ID you are e-mailed when you sign up or sign in with your company name this is NOT your company name that you log into Wonder with NOTE: recording to a non-registered wid on the ZIM server will not work and there is no error message client - the client the app is for - if it is for your company, just put your company app - the app or site the Wonder stats are for notes - (default null) any extra notes like any user data (limit 256 characters as it is stored each record) server - a server with zim Wonder running Note: the default value for the server parameter has been removed as it risks being out-of-date If you have signed up for ZIM Wonder at https://zimjs.com/wonder/ then import https://zimjs.org/cdn/zimserver_urls.js in your code (script tag up top) this gives a global zimWonderURL variable for you to pass into the server parameter the zimserver_url.js script will always hold the latest domain:port for the zim server METHODS count(keyword) - sends a line to the server script with the given keyword as well as date and time timeStart(keyword) - starts timing for the specified keyword (nothing sent to server yet) timePause(keyword) - pauses the timing for this keyword timeUnpause(keyword) - unpauses the timing for this keyword timeEnd(keyword) - ends timing for the specific keyword and sends the time to the server NOTE: if the user exits the app (or leaves page) nothing gets sent to the server due to unreliable beforeUnload events in the HTML world (otherwise all this would be batched) order(keyword, item) - sends a line to the server for this item along with a unique order id for the keyword for the user countOff(keyword) - prevents counts from being sent for this keyword countOn(keyword) - allows counts from being sent for this keyword (default) timeOff(keyword) - prevents sending time to the server for this keyword timeOn(keyword) - allows sending time to the server for this keyword (default) orderOff(keyword) - prevents sending orders to the server for this keyword orderOn(keyword) - allows sending orders for this keyword (default) dispose() - clear any event listeners, etc. CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

VERSION

VERSION zim constant DESCRIPTION The version of the ZIM code that is running. The version is considered the file name after the CDN and before the .js or _doc.js. For example, the first version of ZIM Cat is cat/00/zim for both the docs version and the minified version See also the ZIM getLatestVersions() function for the latest versions of ZIM and other ZIM related files. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// the latest versions are on the CDN
// getLastestVersions will access them with ZIM async()
// and provide an versions object in the parameter of the callback function
getLatestVersions(function(versions) {
   if (VERSION == versions.zim) zogg(VERSION + " is the latest version");
   else zogy(VERSION + " is not the latest version");
});

CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

getLatestVersions(call)

getLatestVersions zim function DESCRIPTION Gets the latest versions of ZIM and other ZIM related files. A version is considered the file name after the CDN and before the .js or _doc.js. For example, the first version of ZIM Cat is cat/00/zim for both the docs version and the minified version. The versions for CreateJS on ZIM CDN might be 1.3.0/createjs and for Pizzazz 3 is pizzazz_03 Also see the ZIM VERSION constant for the current version NOTE also see the top of the Docs for all the latest files NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// the latest versions are on the CDN
// getLastestVersions will access them with ZIM async()
// and provide an versions object in the parameter of the callback function
getLatestVersions(function(versions) {
   if (VERSION == versions.zim) zogg(VERSION + " is the latest version");
   else zogy(VERSION + " is not the latest version");
});

PARAMETERS call - a callback function with a versions object is provided to the parameter the version object has version properties for the following: zim, createjs, pizzazz01, pizzazz02, pizzazz03, physics, three, game, socket, threejs, orbitcontrols, box2d, socketio, easystar CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

PWA(call, label, backgroundColor, color, backdropColor, pane, noScale)

PWA zim class extends a CreateJS EventDispatcher DESCRIPTION Class to insert a message for the user to add the app to their mobile device home screen. PWA Progressive Web Apps (PWA) are a way to run Web apps similar to native apps. These are used primarily for mobile so the app runs without the Browser interface and also can run without the Internet, if a proper service worker is set up. See https://zimjs.com/mobile ZIM ZAPPS There are a few requirements and files that need to be set up for PWA. See the ZIM Zapps PWA page at https://zimjs.com/zapps.html The extra PWA files can be made with a tool at https://zimjs.com/zapps The PWA class inserts a message into a ZIM app if both the following are true: 1. the app is on mobile 2. the app is not being launched already from the device home screen The message encourages the user to add the file to the home screen (A2HS). https://developer.mozilla.org/en-US/docs/Web/Progressive_web_apps/Add_to_home_screen HOW IT WORKS Make a new PWA() object and pass it an optional function that runs your app. In either case, an invite the user to add to the home screen message will pop up if the app is on mobile running from a browser - otherwise there will be no message. A. If there is no function then the pane can be closed and that is it. If you want the pane to show up on top then add new PWA() at the end. B. If a function is provided - eg. new PWA(init); then when the pane is closed it will call the init function. If there is no need for a message then PWA() calls the init function right away. NOTE the ZIM Zapps tool will insert a PWA call - which can be adjusted if necessary. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

function ready() { // Frame ready callback
   
   // PWA will show a message if user is on mobile and launching from a browser
   // The app will wait until the message is closed then start
   // or will run right away if there is no message needed
   // such as when not on mobile or already launching from home screen on mobile
   // to test the app on desktop, use new PWA(init).show();
   
   new PWA(init);
   function init() {
      // your app code
      // init is a common function name to start an app
      // but the function can be called whatever you want
      // such as startApp, playGame, etc.
   }
} // end ready

EXAMPLE

function ready() { // Frame ready callback
   
   // Here we run the app and just add a PWA message on top
   // only if user is on mobile and launching from a browser
   // no message would appear if not on mobile or already running from home screen on mobile
   
   // add app code here
   
   new PWA(); // add at end to pop on top of app
   
} // end ready

EXAMPLE

function ready() { // Frame ready callback
   
   // like the last example but may want to start the app
   // when the user closes the message or if there is no message
   
   // add app code here
   // etc.
   
   // function to start animation, for example
   function startAnimation() {
   
   }
   
   const pwa = new PWA(); // add at end to pop on top of app
   // this event will fire if there is no message or when message is closed
   pwa.on("ready", startAnimation);
   
} // end ready

PARAMETERS supports DUO - parameters or single object with properties below call - (default null) the function to call to start the app if left out then nothing will happen when the PWA closes (also see ready event) label - (default "Please add to home screen as an app") along with an icon at left can add different words here or add a custom ZIM Label backgroundColor - (default yellow) background color of pane (any CSS color) color - (default black) font color of label on pane (any CSS color) backdropColor - (default "rgba(0,0,0,.2)") the color of the background that fills the stage pane - (default null) can specify a custom Pane instead of the last four parameters this will be scaled to the 105% the stage width unless noScale is set to true (see below) noScale - (default false) set to true to not scale the Pane (see pane parameter for custom pane) METHODS show() - test the PWA message on desktop for instance - remember to remove the show! EVENTS dispatches a ready event if the pane is closed or if there was no pane but usually, just pass the callback as the first parameter CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

QR(url, color, backgroundColor, size, clickable, correctLevel)

QR zim class extends a ZIM Bitmap which extends a CreateJS Bitmap DESCRIPTION Class to make a QR Code Bitmap from a QRCode library by David Shim NOTE must import https://zimjs.org/cdn/qrcode.js in a script tag NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

new QR("https://danzen.com").sca(.5).pos(40,40,RIGHT,BOTTOM);

PARAMETERS supports DUO - parameters or single object with properties below url - (default "https://zimjs.com") url string the QR code will open color - (default black) the darker color backgroundColor - (default white) the lighter color size - (default 256) the width and height of the QR code clickable - (default true) set to false to not click the QR code to go to the URL correctLevel - (default 2) numbers from 0(M), 1(L), 2(H), 3(Q) corresponding to density Info from: https://blog.qrstuff.com/2011/12/14/qr-code-error-correction The lower the error correction level, the less dense the QR code image is, which improves minimum printing size. The higher the error correction level, the more damage it can sustain before it becomes unreadabale. Level L or Level M represent the best compromise between density and ruggedness for general marketing use. Level Q and Level H are generally recommended for industrial environments where keeping the QR code clean or un-damaged will be a challenge. CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

GIF(file, width, height, startPaused)

GIF zim class extends a ZIM Bitmap which extends a CreateJS Bitmap DESCRIPTION Class to make an animated gif from the gifler library by madCreator https://themadcreator.github.io/gifler/ See: https://zimjs.com/nft/bubbling/gif.html NOTE must import https://zimjs.org/cdn/gifler.js in a script tag NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// dimensions must be provided otherwise will be 100x100
new GIF("path/file.gif", 200, 100).pos(40,40,RIGHT,BOTTOM);

EXAMPLE

const gif = new GIF("path/file.gif", 200, 100)
   .center()
   .tap(()=>{
      gif.pause(!gif.paused);
   });

EXAMPLE

const gif = new GIF("path/file.gif", 200, 100).center();
timeout(1, ()=>{
   gif.reset(); // goes back to start and would play from start
   // to pause on reset seems to need a little time...
   timeout(.05, ()=>{
      gif.pause();
      timeout(1, ()=>{
         // start again
         gif.pause(false);
      });
   });
});

PARAMETERS supports DUO - parameters or single object with properties below file - url string to the animated gif also see ZIM PATH global variable as will get added to the start of the file and is also automatically set if a path is added to Frame() or loadAssets() parameters width - (default 100) the width to show the gif height - (default 100) the height to show the gif startPaused - (default false) set to true to startPaused also see the pause() method - but do not use the method to start paused METHODS pause(state) - pause or unpause the gif state defaults to true, set to false to unpause the gif see also the startPaused parameter stop() - stop the gif (same as dispose()) keyout(color, tolerance, replacement) - remove color from Bitmap and a tolerance between 0-1 the default color is "#389b26" which is a medium dark green the default tolerance is .1 - the higher the tolerance the less sensitive the keying process - so more colors will be removed similar to the provided color color and tolerance can be an array of colors and tolerances (or just one tolerance if all are the same) replacement (default clear) a color to replace the keyed out color with or an optional array to match the colors array if an array is used reset() - restarts the GIF dispose() - delete the GIF and remove Ticker ALSO see the gifler property to access the Gifler object and its methods at https://themadcreator.github.io/gifler/ ALSO see ZIM Bitmap for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. PROPERTIES type - holds the class name as a String paused - get whether the animated gif is paused - see pause() to change ticker - the ZIM Ticker function that is updating the stage gifler - the Gifler object - see https://themadcreator.github.io/gifler/ animator - the Gifler animator CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Rive(width, height, src, stateMachines, artboard, animations, autoplay, layout, buffer, file, useOffscreenRenderer, enableRiveAssetCDN, shouldDisableRiveListeners, isTouchScrollEnabled, automaticallyHandleEvents, onLoad, onLoadError, onPlay, onPause, onStop, onLoop, onStateChange, onAdvance, assetLoader, canvas)

Rive zim class extends the Rive class DESCRIPTION Rive lets you make interactive graphics and animations. See https://rive.app/ Rive is an animation tool similar to Adobe Animate (Flash) but with a special StateMachine that has a connector node system to guide animation states. Many Rive animations can be done in ZIM with animate() and call back functions. The interactivity provided by Rive listeners, can be events in ZIM. The benefit of embedding Rive apps in ZIM is that there are many Rive animators making animations. Rive also has a bone system that will offer more flexible animations somewhat like animating points of Blob and Squiggle, but the points are connected by a spine (bones) Adobe Animate has all these things too (except for a StateMachine) so keep that in mind. Rive apps can be displayed in ZIM using one of two classes Rive() which handles animation, input and nodes RiveListener() which is for when a listener is assigned in Rive like pressmove, pressdown or pressup The listener version takes a few seconds to load the WASM code and then is quick. NOTE Must import https://unpkg.com/@rive-app/[email protected] or newer in a script tag USAGE: If you make your own Rive files, we would recommend using inputs NOT listeners. This allows you to use Rive() rather than RiveListener() and the inputs can be operated with ZIM events. This will make load time faster and give you integrated control. The only time you might need listeners is if you have many animated objects in one Rive file as opposed to a single object animation. ZIM cannot apply events on individual objects in a Rive scene so in this case, you would need to add Rive listeners and use RiveListener(). USAGE: The Rive object is NOT a ZIM DisplayObject but rather a Rive object. So it will have the methods and properties of a Rive object as outlined here: Rive API (parameters, methods and properties) https://rive.app/community/category/web-js-runtime/sgq3f0LKKP2X From: https://rive.app/community/doc - press Getting Started then Web (JS) USAGE: The Rive object has a display property that IS a ZIM DisplayObject This is a dynamic Bitmap and is what you add to ZIM and operate on just like any other DisplayObject with center(), loc(), pos(), reg(), sca(), animate(), wiggle(), tap(), etc. Keeping the rive file bigger in dimensions, then scaling down in ZIM may lead to better quality NOTE if using Rive and Blobs, sometimes Rive apps use embedded images that need the JavaScript Blob() ZIM disables Blob until the Rive app is loaded. Possibly this could conflict with a ZIM Blob being made at the same time as the Rive app. In that case, use zim.Blob() for the blob. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) SEE: https://zimjs.com/rive/animate.html SEE: https://zimjs.com/rive/input.html SEE: https://zimjs.com/rive/node.html EXAMPLE

const r = new Rive({
   src: "test.riv",
   width: 500,
   height: 500,
   autoplay: true,
   stateMachines: "StateMachine 1",    
   artboard: "Artboard", // optional            
});         
// add the display property of the Rive object to the stage (not the Rive object itself)
r.display.sca(.5).centerReg();

PARAMETERS supports DUO - parameters or single object with properties below ** These parameters come from Rive - except width and height which are used to make a canvas ** Rive documentation is a tricky to track down - start here: https://rive.app/community/doc - press Getting Started then Web (JS) ** This information comes from https://rive.app/community/category/web-js-runtime/sgq3f0LKKP2X width - (default 500) the width of the canvas that ZIM Rive() will make - or see canvas parameter for an existing canvas Keeping the rive file bigger in dimensions, then scaling down in ZIM may lead to better quality ZIM Rive() only - for actual Rive, a canvas needs to be provided, with ZIM Rive() we make the canvas height - (default 500) the height of the canvas that ZIM Rive() will make - or see canvas parameter for an existing canvas ZIM Rive() only - for actual Rive, a canvas needs to be provided, with ZIM Rive() we make the canvas src - the URL to the .riv file. Below is the information from the Rive site: There are two optional ways to use src: either via URL to the .riv file, or a path to the public .riv asset to use. One of src or buffer must be provided. URL - If you are hosting your .riv on some publicly accessible bucket/CDN (i.e. AWS, GCS, etc.), you can pass in the URL here. Alternatively, with ES6, you may import the .riv file as a data URI. Depending on your bundle loader, you may need to use a plugin (i.e url-loader for Webpack) to properly parse and load in .riv files as a data URI string. stateMachines - Name of state machines to load. artboard - Name of the artboard to use. animations - Name or list of names of animations to play. autoplay - If true, the animation will automatically start playing when loaded. Defaults to false. layout - Layout object to define how animations are displayed on the canvas. buffer - ArrayBuffer containing the raw bytes from a .riv file. One of src or buffer must be provided. file - Lets you reuse a previously loaded Rive runtime file object without needing to fetch it again from the src URL or reload it from the buffer. This can improve performance by eliminating redundant network requests and loading times, especially when creating multiple Rive instances from the same source. Unlike the buffer and src parameters, which still require parsing under the hood to create a runtime file object, the file parameter uses an already parsed object, including any loaded assets. useOffscreenRenderer - Boolean flag to determine whether to use a shared offscreen WebGL context rather than create its own WebGL context for this instance of Rive. This is only relevant for the @rive-app/webgl package. If you are displaying multiple Rive animations, it is highly encouraged to set this flag to true. Defaults to false. enableRiveAssetCDN - Allow the runtime to automatically load assets hosted in Rive's CDN. Enabled by default. shouldDisableRiveListeners - Boolean flag to disable setting up Rive Listeners on the <canvas> element, thus preventing any event listeners from being set up on the element. Rive Listeners by default are not set up on a <canvas> element if there is no playing state machine, or a state machine without any Rive Listeners set up on the state machine isTouchScrollEnabled - For Rive Listeners, allows scrolling behavior to still occur on canvas elements when a touch/drag action is performed on touch-enabled devices. Otherwise, scroll behavior may be prevented on touch/drag actions on the canvas by default. automaticallyHandleEvents - Enable Rive Events to be handled by the runtime. This means any special Rive Event may have a side effect that takes place implicitly. For example, if during the render loop an OpenUrlEvent is detected, the browser may try to open the specified URL in the payload. This flag is false by default to prevent any unwanted behaviors from taking place. This means any special Rive Event will have to be handled manually by subscribing to EventType.RiveEvent onLoad - Callback that gets fired when the .riv file loads. onLoadError - Callback that gets fired when an error occurs loading the .riv file. onPlay - Callback that gets fired when the animation starts playing. onPause - Callback that gets fired when the animation pauses. onStop - Callback that gets fired when the animation stops playing. onLoop - Callback that gets fired when the animation completes a loop. onStateChange - Callback that gets fired when a state change occurs. onAdvance - Callback that gets fired every frame when the Artboard has advanced. assetLoader - Callback that gets invoked for every asset detected in a Rive file (whether included or excluded). The callback is passed a reference to a Rive FileAsset and associated bytes for the file (if the asset is embedded in the file). In this callback, you'll determine whether or not to load the asset in your app yourself, or have Rive do it for you. canvas - an existing canvas, in which case, the width and height are ignored METHODS play(names, autoplay) - Plays a specified linear timeline animation(s) or state machine via the passed-in name or array of names Useful if you have either programmatically called pause() or stop() or set autoplay: false when instantiating Rive. If no name is passed in, it plays all instantiated timeline animations or state machines (or the default animation if neither is instantiated). pause(names) - Pauses a specified linear timeline animation(s) or state machine via the passed-in name or array of names. Useful if you want to programmatically pause the playing animation and pause the render loop. You may want to use this API too if the associated Rive instance's <canvas> element is scrolled offscreen. If no name is passed in, it pauses all instantiated timeline animations or state machines. stop(names) - Stops a specified linear timeline animation(s) or state machine via the passed-in name or an array of names. Useful if you want to programmatically stop the playing animation and render loop. You may want to use this API too if the associated Rive instance's state machine is "done," or in an exit state. If no name is passed in, it stops all instantiated timeline animations or state machines. scrub(animationNames, seconds) - Scrubs through (a) linear timeline animation(s) by a specified amount of seconds. This will not do anything if you are playing through a state machine. This only applies if you are using instantiated animations through the animations property. reset(params) - Resets the Rive Artboard, linear timeline animations, and/or the state machine from the start (or entry state) based on the parameters passed in. Implicitly, this method will also cleanup any existing instances (Artboard, Animation, and/or State Machine) created already before creating new ones. The instantiated timeline animation or state machine will play immediately depending on the autoplay property passed in. on(type, function) - Similar to the Web API's addEventListener functionality on DOM elements, you can subscribe to specific "events" in a render loop cycle via providing an EventType enum and a callback for the runtime to invoke with different parameters depending on the event you want to subscribe to. See events, below. off(type, function) - Similar to the Web API's removeEventListener functionality on DOM elements, you can unsubscribe to specific "events" in a render loop cycle via providing an EventType enum and the callback reference that was registered via the on() API. removeAllEventListeners() - This effectively removes all event listening subscriptions for a single particular EventType that may have been added via the on() API. stateMachineInputs() - Returns a list of state machine input objects from the given state machine name passed in (if the state machine has been instantiated). Use these state machine inputs to drive the state machine forward.' dispose() - dispose the Rive object ** more methods and properties at https://rive.app/community/doc/rive-parameters/docHI9ASztXP cleanup(), cleanupInstances(), load(), resizeToCanvas(), resizeDrawingSurfaceToCanvas(), stopRendering(), startRendering() getTextRunValue(), setTextRunValue(), resolveAnimationFrame(), enableFPSCounter(), disableFPSCounter() PROPERTIES type - holds the class name as a String display - a ZIM Bitmap that is constantly updated with the Rive animation - this is what gets added to the stage, etc. canvas - the canvas used (and hidden) content - contents is just a property on the Rive instance you can log to the console to see an object hierarchy of what was loaded in from the Rive file. This is useful to see what Rive file was loaded in, all the artboards associated with the file, animations and state machines, state machine inputs, and more. It's also useful if you don't have access to the file to inspect in the Rive editor directly. source - get the src attribute in the Rive instance activeArtboard - get the name of the active artboard animationNames - get an array of all animation names on the loaded in Artboard (even if the animations are not specified at instantiation) stateMachineNames - get an array of all state machine names on the loaded in Artboard (even if the state machine(s) are not specified at instantiation) playingAnimationNames - get an array of all active playing timeline animation names on the Rive instance (if you are playing a state machine, this will not return the currently active state timeline animations) playingStateMachineNames - get an array of all active playing state machine names on the Rive instance pausedAnimationNames - get an array of all active paused timeline animation names on the Rive instance (if you are playing a state machine, this will not return the currently active state timeline animations) pausedStateMachineNames - get an array of all active paused state machine names on the Rive instance isPlaying - returns true if any animation is playing isPaused - returns true if all instanced animations are paused isStopped - returns true if no instanced animations are playing or paused bounds - returns the bounds of the Artboard layout - get or set a Rive Layout EVENTS load - dispatched when Rive has successfully loaded in the Rive file loaderror - dispatched when Rive cannot load the Rive file play - dispatched when Rive plays an entity or resumes the render loop pause - dispatched when Rive pauses the render loop and playing entity stop - dispatched when Rive stops the render loop and playing entity loop - (Singular animations only) dispatched when Rive loops an animation advance - dispatched when Rive advances the animation in a frame statechange - dispatched when a Rive state change is detected riveevent - dispatched when a Rive Event gets reported CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

RiveListener(src, damp, canvas, wasm)

RiveListener zim class extends a CreateJS EventDispatcher DESCRIPTION Some Rive files have Rive Listeners to capture pointerdown, pointerup, pointermove, etc. RiveListener() is like Rive() - see Docs on Rive() - but lets ZIM trigger these listeners. The system to do so is fairly complex, involving using the Rive advanced-canvas with WASM. One draw-back is the WASM takes 5-10 seconds to load the first time - then it is fast. ZIM must run the render loop and take care of artboards and stateMachines. USAGE: If you make your own Rive files, we would recommend using inputs NOT listeners. This allows you to use Rive() rather than RiveListener() and the inputs can be operated with ZIM events. This will make load time faster and give you integrated control. The only time you might need listeners is if you have many animated objects in one Rive file as opposed to a single object animation. ZIM cannot apply events on individual objects in a Rive scene so in this case, you would need to add Rive listeners and use RiveListener(). NOTE Need to import Rive canvas-advanced (may need to match WASM version) and set RiveCanvas on window for ZIM to use import RiveCanvas from "https://unpkg.com/@rive-app/[email protected]"; window.RiveCanvas = RiveCanvas; SEE: Rive() in the docs for general methods and properties of the Rive object SEE: https://zimjs.com/rive/listen.html EXAMPLE

const stasher = new zim.RiveListener("https://public.rive.app/community/runtime-files/12127-23059-stasher-character.riv");         
stasher.on("ready", ()=>{
   stasher.display.scaleTo().center();
});

const button = new RiveListener("https://public.rive.app/community/runtime-files/12375-23478-switcher.riv");
button.on("ready", ()=>{
   button.display.sca(.5).pos(0,0,RIGHT,BOTTOM);
   button.on("pointerup", e=>{
      // Original Rive way:
      // stasher.pauseMove = !e.stateMachine.input(0).asBool().value // sigh
      // or use e.input for first input (input is an event object property added by ZIM RiveListener)
      // pauseMove, pauseUp, pauseDown are properties added by ZIM RiveListener to disable/enable the listeners
      stasher.pauseMove = !e.input.asBool().value; // or !button.input.asBool().value         
   });
   // button.stateMachines[0].input(0).asBool().value = true;
   // or use input as default first stateMachine input
   button.input.asBool().value = true;   
});

PARAMETERS supports DUO - parameters or single object with properties below src - URL to the .riv file with Listeners damp - (default .2) damps the pointermove data - set to 1 to not damp. canvas - an optional canvas to place Rive - not needed as ZIM makes the canvas (and hides it) wasm - (default "https://unpkg.com/@rive-app/[email protected]/rive.wasm") the version of canvas-advanced wasm this may need to match the version of Rive canvas-advanced imported at top of app METHODS ** See Rive() for Rive methods on the rive property dispose() - dispose the RiveListener object and parts PROPERTIES type - holds the class name as a String display - a ZIM Bitmap that is constantly updated with the Rive animation - this is what gets added to the stage, etc. canvas - the canvas used (and hidden) rive - the Rive object made - see Rive() in Docs for methods and properties of the Rive object renderer - the Rive renderer file - gives access to artboards loaded via artboardByIndex(), artboardByName(), artboardCount() and defaultArtboard() artboards - an array of artboards animations - an array of animations stateMachines - an array of stateMachines input - the first input of the default stateMachine pauseMove (default false) set to true to not dispatch pointermove events pauseDown (default false) set to true to not dispatch pointerdown events pauseUp (default false) set to true to not dispatch pointerup events EVENTS complete / ready - the rive app is ready pointerdown - dispatches a pointerdown event when pointer is down with event object stateMachine and input (first input) properties pointerup - dispatches a pointerup event when pointer is up with event object stateMachine and input (first input) properties ** use a riveListener.display.on("mousemove", ()=>{}) to get pointermove CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

THEME()

THEME zim static class DESCRIPTION ZIM Theme changes the ZIM colors to themed sets of colors and it can set darkness (and lightness with negative) and tint as well. Use the class directly like: Theme.set("themeName"); This affects everywhere a ZIM color is used AFTER the theme is set. This includes default colors for components like Button colors, etc. but not some interface colors like Squiggle and Blob control colors. Use Theme.set("zim") to go back to traditional ZIM colors. This will go back to ZIM colors for anything made afterwards but will not change objects that are already made. To change colors of objects already made, use Theme.apply("themeName"); Warning: using Theme.apply() will reload the page. To apply new theme colors to objects already made without reloading the page use Theme.set() and then adjust button.backgroundColor = red; etc. A read-only THEME global object is set when a theme is set or applied. An applied theme will be re-applied when the page is reloaded. Use Theme.clear() to reload the page with no theme set. COLORS AND SHADES Themes will work on the following built in ZIM colors and shades (no quotes): red, orange, yellow, green, blue, purple, pink, brown, interstellar black, licorice, darker, dark, charcoal, grey, granite, tin, pewter, silver, fog, mist, light, moon, lighter, white Note: the shades are #000, #111, etc. to #eee, #fff THEMES There are colors and greys (including white and black). "zim" - the original ZIM colors and greys "html" - the colors are replaced with HTML version so blue is "blue". Greys left the same. "future" - the colors and greys are taken from AI visions of the future. "invert" - the colors and the greys are inverted - as in a difference against white. "greyscale" - the colors are set to greys. "neon" - even more vibrant than ZIM colors! Greys are set towards white and black. "seventies" - check out the shag on my app - greys are adjusted too. "warm" - lovely mediterranean colors... mmm - greys are adjusted too. CUSTOMIZE An object literal with colors and values can be passed to set() or apply() as the first parameter And a lightness ratio from -1 to 1 can be applied with negative making the colors darker So Theme.set("zim", .3); would lighten all the regular ZIM colors and greys by 30% for objects made after setting. Theme.apply("future", -.2); would reload the page and apply a future colors and greys 20% darker. The 3rd and 4th parameters are for tint and tintRatio - just like ZIM toColor(). So Theme.set("zim", 0, red, .5) would make all ZIM colors and greys be half way to red. The last parameter is exceptions which can be one color or an array of colors to not apply the theme to. Special "colors" and "greys" strings can be used to not include all colors or all greys. So Theme.set("zim", 0, red, .5, "greys"); would redden only the colors. Theme.set("future", .2, null, null, ["yellow", "white"]); would except yellow and white. See: https://zimjs.com/zim/theme.html NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

   // This will make three buttons, two with zim theme and one with greyscale theme
   new Button().loc(100,100); // will be ZIM colors
   Theme.set("greyscale");
   new Button().center(); // will be in greyscale
   Theme.set("zim");
   new Button().pos(100,100,RIGHT,BOTTOM); // will be ZIM colors

EXAMPLE

   F.color = darker;
   new Tile(new Circle(30, [blue, green, red, orange, yellow]), 12, 5, 20, 20).center();
   const button = new Button({label:THEME.name=="neon"?"ZIM":"NEON"}).pos(0,30,CENTER,BOTTOM).tap(()=>{
      if (button.text=="NEON") Theme.apply("neon"); // will reload page as neon
      else Theme.apply("zim"); // will reload page as zim
   });

EXAMPLE

   Theme.set("zim", .1, red, .2, "greys");
   // anything that gets made from now on will have slightly lighter zim colors tinted a little red
   // but the greys will remain default

EXAMPLE

   Theme.set("zim", -.5, null, null, "colors");
   // anything that gets made from now on will have darker greys

METHODS set(name, lightenRatio, tint, tintRatio, exclude) |ZIM DUO| - set a theme to be used after setting name (default "zim") one of "zim", "html", "future", "invert", "neon", "seventies", "warm" lightenRatio (default null) set between -1 and 1 to darken (to black) if negative or lighten (to white) if positive this works like ZIM lighten() tint (default null) a color to tint to this works like ZIM toColor(tint, ratio) tintRatio (default 0) set between 0-1 to apply a ratio of tint exclude (default none) a color or array of colors to exclude - these will stay ZIM default colors convenience colors: "colors" and "greys" can also be used to exclude all colors or all greys apply(name, lightenRatio, tint, tintRatio, exclude) |ZIM DUO| - relaod the app with the applied theme see the parameters for set() above clear() - reloads the page with no theme set to stop applying a theme going forward, use set("zim") for the default ZIM colors CONSTANTS THEME - a Theme object literal with name, lightnessRatio, tint, tintRatio and exclude properties - see set() method parameters CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

LeaderBoard(data, title, width, height, corner, backgroundColor, titleColor, colors, total, scoreWidth, scorePlaces, scoreZeros, spacing, arrows, borderColor, borderWidth, shadowColor, shadowBlur, reverse, allowZero, font, fontSize, nameShift, scoreShift, rankShift)

LeaderBoard zim class - extends a zim.Container which extends a createjs.Container ** MUST import zim_game - see https://zimjs.com/es6.html#MODULES DESCRIPTION Shows leaders in a game. Allows player to enter initials if in top players as set by the total parameter (default 10) For the data parameter you can set an ID for ZIM data storage - get the ID at https://zimjs.com/leaderboard/ Or you can set the data parameter to "localStorage" for device only or "manual" for data from a custom database See the ZIM ZONG game example for putting a LeaderBoard in a zim.Pane https://zimjs.com/zong/ NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const lb = new LeaderBoard({
   data:"E-MAILED CODE FROM zimjs.com/leaderboard/",
   corner:0,
   backgroundColor:dark,
   titleColor:light
}).center();

// then to record a score at some point later:
lb.score(500);

PARAMETERS supports DUO - parameters or single object with properties below data - (default "localStorage") localStorage will let a user keep their high score on a computer set data to an ID that is provided at https://zimjs.com/leaderboard/ to use the free ZIM data service set data to an Array of score objects: [{player:"RAJ", score:20}, {player:"DAN", score:18}] for manual database usage title - (default null) - set to a String to create a title above the board width - (default 400) - the width of the board height - (default 600) - the height of the board corner - (default 20) - the rounded corner of the board - set to 0 for no corner backgroundColor - (default white) - the backing color of the board titleColor - (default licorice) - the title text color if a title is provided colors - (default the object detailed below) - an object literal that sets the colors of the boxes and texts the object holds rank, name and score backing colors, font colors, and current colors for each whatever properties you provide will overwrite the default color - but you do not have to provide them all Note: that darker is just a ZIM shortcut to #111111, etc. you can use any CSS style color like "green", etc. { rankColor: light, rankBackgroundColor: darker, currentRankColor: white, currentRankBackgroundColor: pink, nameColor: darker, nameBackgroundColor: lighter, currentNameColor: darker, currentNameBackgroundColor: "#f0d2e8", scoreColor: darker, scoreBackgroundColor: light, currentScoreColor: darker, currentScoreBackgroundColor: "#f0d2e8" } total - (default 10) the number of rows to show scoreWidth - (default 300) the width of the score field (the whole grid will be scaled to fit inside the width and height) scorePlaces - (default 6) the maximum number of digits expected scoreZeros - (default false) set to true to fill in zeros up to the scorePlaces- ie. 00023 spacing - (default 10) the spacing between the fields (the whole grid will be scaled to fit inside the width and height) arrows - (default false) set to true to show arrows above and below the name when the player enters their name borderColor - (default null) the border color borderWidth - (default null unless borderColor then default 2) the border thickness shadowColor - (default rgba(0,0,0,.3)) the shadow color - set to -1 for no shadow shadowBlur - (default 14) set to 0 for no shadow reverse - (default false) put smallest score at top allowZero - (default false) allow a zero score - good for when reverse is set font - (default courier) the font for the store name and score fontSize - (default 60) the font size nameShift - (default 0) vertical shift for the name if the font is off center scoreShift - (default 0) vertical shift for the score if the font is off center rankShift - (default 0) vertical shift for the rank if the font is off center METHODS score(score) - set a score - will allow user to enter initials - returns a position number save() - this method is automatically done by save button when initials are filled in cancel() - this method is automatically called when the user presses off the board without saving startTime() - start timing the game - if a points per minute was provided during ZIM LeaderBoard setup (not for localStorage or manual) stopTime() - stop timing the game - if a points per minute was provided during ZIM LeaderBoard setup (not for localStorage or manual) redraw(newData, newWinner) - this method is automatically done at various points to redraw the grid with new data newData is in an array with score objects like so: [{player:"RAJ", score:20}, {player:"DAN", score:18}] newWinner is an optional index of the winner - who will then be able to enter their id leave out the newWinner to show the board with current scores set (no blanks for entering name) dispose() - remove event listeners - you need to remove the LeaderBoard from the stage NOTE if you are using manual data then you can use any of these methods manually NOTE the leaderBoard extends a zim.Container so also has all container methods PROPERTIES winner - the index of the current winner if there is one (name getting entered) otherwise null place - the index of the player's score even if not on the LeaderBoard backing - reference to the zim.Rectangle used for the backing backdrop - reference to the zim.Rectangle used for the backdrop to press off the LeaderBoard filled - true if the winner name is filled in with three characters else false grid - reference to the zim.Container used for the grid the grid has row containers and each row has a rank stepper, three name steppers and a score Label access these with: var score2 = grid.getChildAt(1).getChildAt(4); or to loop through all: zim.loop(grid, function(row, i) { var rank = row.getChildAt(0); var name1 = row.getChildAt(1); var name2 = row.getChildAt(2); var name3 = row.getChildAt(3); var score = row.getChildAt(4); }); titleText - reference to the zim.Label used for the title if the title parameter is provided dataSource - get the data used as a string: database (using an ID), localStorage or manual (custom) NOTE: if there is a problem with your data ID then this will revert from database to localStorage You can tell when you save a score / name the save button says LOCAL if localStorage and SENT if database or manual key - the ID (from https://zimjs.com/leaderboard/) if provided NOTE the leaderBoard extends a zim.Container so also has all container properties EVENTS dispatches a change event for each time the name letters are changed changed dispatches a press event for when the save button is pressed dispatches a save event for when the data is saved in localStorage or database (key) mode but not manual mode dispatches a close event only when the board is closed by pressing off the board dispatches an error event if data connection is not made properly dispatches a cancel event when a new score is requested before an older score is saved CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Meter(stage, vertical, horizontal, color, textColor, padding, decimals, alpha, skew)

Meter zim class - extends a zim.Label ** MUST import zim_game - see https://zimjs.com/es6.html#MODULES DESCRIPTION A meter that shows measured FPS in a text label NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const meter = new Meter(stage, TOP, LEFT); // adds to stage at top left - default bottom left

PARAMETERS supports DUO - parameters or single object with properties below stage - the stage vertical (default "bottom") set to TOP for top - no middle horizontal (default LEFT) set to RIGHT for right - no middle color (default green) color of backing textColor (default black) color of text padding (default 20) the distance from Meter to edge decimals (default 0) the number of decimals to show alpha (default .6) the alpha of the Meter skew (default 10) the skewX of the Meter METHODS position(vertical, horizontal) - reset the position - returns object for chaining dispose() PROPERTIES text - the text of the meter Plus all the methods and properties of a Label CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Board(size, cols, rows, backgroundColor, rollBackgroundColor, borderColor, borderWidth, isometric, indicatorColor, indicatorBorderColor, indicatorBorderWidth, indicatorSize, indicatorType, arrows, arrowColor, arrowRollColor, swipe, info, labels, color, scaleMin, scaleMax, buffer)

Board zim class - extends a zim.Container which extends a createjs.Container ** MUST import zim_game - see https://zimjs.com/es6.html#MODULES DESCRIPTION Creates a square tiled board with num columns and rows. This can be either isometric (default) or top view. The info for the board can be for any number of rows and columns that is the same size or bigger than the num for the board. The info does not need to have the same number of columns and rows The info holds data, color, icon and items properties and is an outer array of rows and inner arrays for columns. The info array can be specified as a parameter or adjusted as a property later with array manipulations but board.update() must be called to view the changes. Board offers many properties and methods to add and remove items, set colors, icons and data per square, move the board and move items along paths, etc. There is a powerful filter parameter that uses subsets of the info This can be used to find random tiles with certain info or to allow key presses only to certain tiles. The filter is positive and negative to include or not include the following: data, notData, color, notColor, icon, notIcon, info, notInfo, col, notCol, row, notRow in each case it can be a single value or an array of values for instance board.getRandomTile({data:"x", notItem:[tree, bush, rock]}); etc. See: https://zimjs.com/iso/ for a full example Note: as of game 2.0, the zim namespace is not required unless zns is true EXAMPLE

// for a more complete example see https://zimjs.com/iso/
const board = new Board().center();
const person = new Person();
board.add(person, 5, 5);
const tile = board.getTile(2,3);
board.setColor(tile,red);
board.setData(tile,"0");
board.addKeys(person,"arrows",{notData:"0"});

PARAMETERS supports DUO - parameters or single object with properties below size - (default 50) the square tile size in pixels cols - (default 8) the number of visible columns on the board rows - (default cols) the number of visible rows on the board backgroundColor - (default lighter) the square color of the board see the info parameter/property and setColor() to set individual colors rollBackgroundColor - (default fog) the rollover square color of the board borderColor - (default darker) the border color of the squares borderWidth - (default 2) the border width of the squares icon - (default null) the default DisplayObject to clone add to each tile set the icon.type property to be included in filters - eg. icon.type = "poisonivy" see the info parameter/property and setTile() to set individual tiles isometric - (default true) set to false to see a top view isometric is rotating the board 45 and scaling the container by 2 in the width indicatorColor - (default black) the indicator shows a path with showPath() indicatorBorderColor - (default darker) the border color of the indicator indicatorBorderWidth - (default 8) the width of the border indicatorSize - (default 2) indicatorType - (default "circle") set to "circle" or "square" for the whole tile arrows - (default true) show (auto) arrows if info is larger than board view arrows will move the "camera" rather than move the board so pressing right will move the board to the left, etc. arrowColor - (default "rgba(0,0,0,.4)") the arrow color arrowRollColor - (default white) the arrow roll color swipe - (default true) set to false to not swipe on the board to move the board (like arrows) info - (default null) set to an array of rows and cols in the following format: Rows are the outer array and cols are the inner arrays with {} being the info [[{data:"x", color:blue, items:[new Person()]},{},{},,,,,], [,,],,,,,,,,,,,,,,,] data (default "x"): any data desired - could be data for path finding or an array, etc. color (default backgroundColor): the color of the tile on the board when showing this info items (default []): a list of items to display on the tile when showing this info The info will be automatically filled in so just commas will do as placeholders The max length of the inner arrays will be used for all inner arrays The final length of rows and cols will be available as numCols and numRows See also the methods for ways to add data, color, icon and items Or use the board.info property any time to change the info - may need to board.update() after The info may be bigger than the board size and does not have to be square like the board labels - (default false) set to true to display the data from info in tiles - for debugging color - (default granite) color of the labels scaleMin - (default 1.2) the minimum items will be scaled when farther (top) from user scaleMax - (default 1.8) the maximum items will be scaled when closer (bottom) to user buffer - (default 3) nudge camera when moving item is this many tiles from the edge applies when info is larger than board and keys or path is used to move item set to 0 to not nudge camera METHODS **FILTER - some methods have an optional filter parameter this will limit the method to work on a subset of the info array or tiles the filter parameter is an object {} with any number of the following properties: Note: for convenience, these also work in plural - for instance colors, notItems, cols, etc. data - a value or array of data the info/tile must have notData - a value or array of data the info/tile must NOT have color - a value or array of color the info/tile must have notColor - a value or array of color the info/tile must NOT have icon - a value or array of the icon's type property the info/tile must have notIcon - a value or array of the icon's type property the info/tile must NOT have item - a value or array of items the info/tile must have notItem - a value or array of items the info/tile must NOT have col - a value or array of cols (in visible board) the info/tile must be in notCol - a value or array of cols (in visible board) the info/tile must NOT be in row - a value or array of rows (in visible board) the info/tile must be in notRow - a value or array of rows (in visible board) the info/tile must NOT be in positionBoard(i, j) - move the board to show data from info at j row and i col see also startCol and startRow properties and moveRow() below moveCamera(dir) - moves the camera LEFT, RIGHT, UP or DOWN this moves the board the opposite direction by one tile used internally by arrows and swiping addCol(index) - add a column of default data at the given index (optional - at end of info if not provided) addRow(index) - add a row of default data at the given index (optional - at end of info if not provided) update() - updates data, colors and pieces for currently visible board call this if the info is manually updated with array manipulation getTile(col, row) - get the tile at a given col and row isometric has cols from top to right and rows from top to left getRandomTile(filter**) - get a random tile or a random tile within a filtered set - see **FILTER at top of METHODS getIndexes(tile) - get an object with col and row properties for tile isometric has 0,0 is at top of board with cols going to right and rows going to left getPoint(a,b) - get tile point (x, y) in items container a is either tile (leave b blank) or pass in i and j info indexes getGlobalPoint(a,b) - get the tile point (x, y) on global stage a is either tile (leave b blank) or pass in i and j info indexes getInfo(a,b) - get the info object for a tile {data:data, color:color, items:[items]} a is either tile (leave b blank) or pass in i and j info indexes getData(a,b) - get the data for a tile a is either tile (leave b blank) or pass in i and j info indexes getColor(a,b) - get the color for a tile a is either tile (leave b blank) or pass in i and j info indexes getIcon(a,b) - get the icon for a tile a is either tile (leave b blank) or pass in i and j info indexes getItems(a,b) - get the items array for a tile a is either tile (leave b blank) or pass in i and j info indexes getAllItems(filter**) - get an array of all items or pass in a filter to get a filtered set - see **FILTER at top of METHODS getTilesAround(a,b) - get an array of tiles around a tile [8 items clockwise from top] a is either tile (leave b blank) or pass in i and j info indexes setData(tile, value) - set the data for a tile setColor(tile, color) - set the color of a tile for setting items on the board use add() method for setting items off the board or for setting the info use board.info[j][j] = {data:data, color:color, items:[item, item, etc.]} setIcon(tile, icon) - set the icon for the tile - also see icons parameter clearInfo(filter**) - clear all the info or a filtered set - see **FILTER at top of METHODS clearData(filter**) - clear all the info data or a filtered set - see **FILTER at top of METHODS clearColors(filter**) - clear all the colors (to default color) or a filtered set - see **FILTER at top of METHODS clearIcons(filter**) - clear all the icons (to default icon) or a filtered set - see **FILTER at top of METHODS clearItems(filter**) - clear all the items or a filtered set - see **FILTER at top of METHODS setArrows() - sets arrows to handle moving camera these will automatically be show when needed (info is bigger than cols or rows) removeArrows() - remove arrows setArrowHover() - update hover - ZIM will do this automatically setDepth() - set the stacking order of an item in items - ZIM will do this automatically add(obj, col, row, data, color, icon) - add a DisplayObject to the board this adds the object to the items container - and adds various properties (so do not addTo manually) data is additional data - for instance that could be used in path finding icon is any DisplayObject that will be centered in the Rectangle of the tile set icon.type to be included in the filters - for instance, icon.type = "stone", icon.type = "trap" remove(obj) - removes an object from the board position(obj, col, row) - position an item at the col and row on the board to position an object off the board remove the object and use board.info[j][i].items.push(obj); the board will add the object when it needs to be shown move(obj, cols, rows, time) - (relative) animates or places object a certain number of rows or cols on the board time (default .5s) is the seconds to move ONE square! Also see ZIM TIME constant moveTo(obj, col, row, time) - (absolute) animates or places object to a certain row or col on the board time (default .5s) is the seconds to move ONE square! Also see ZIM TIME constant showPath(path, time) - shows path indicators for a path path has a format of [[x,y],[x,y]] or [{x:col, y:row}, {etc.}, {etc.}] This accommodates an EasyStar path - see https://zimjs.com/iso/ time is in seconds. Also see ZIM TIME constant clearPath() - clears the path followPath(obj, path, time, animation, buffer) - animates object along a provided path path has a format of [[x,y],[x,y]] or [{x:col, y:row}, {etc.}, {etc.}] time (default .6s) is how long to take from one step to the next. Also see ZIM TIME constant animation (default .3s) is how long to animate to get to the next step. Also see ZIM TIME constant buffer (default 0) how many tiles from the edge before the camera is nudged a buffer of 0 will not nudge the camera but if the camera is moved, the path could lead the item off the board which is fine - if that is what is desired stopFollowPath() - stops animation along path shiftPath(lastStartX, startX, lastStartY, startY, obj) - move the path lastStartX is board startX before shifting and startX is the new board startX - same for y As the camera or board moves, the path coordinates need to change too ZIM does this automatically when using arrows or swiping and a path is visible addKeys(obj, type, filter**) - add keyboard control to item - type is "arrows" or "wasd" optionally pass in a filter object - see **FILTER at top of METHODS to limit the parts of the board the item can be keyed to for instance, {data:["x", "g"]} allows moving to tiles with info data of "x" or "g" but not anything else Note: followPath() can only follow data so to sync these use the data filter Note: to change the filter, use removeKeys() and then addKeys() with a different filter removeKeys(type) - remove the keyboard controls for a certain type - "arrows" or "wasd" NOTE the Board extends a zim.Container so also has all container methods PROPERTIES type - a reference to the type of object as a string tiles - a reference to the ZIM Tile object that makes the board pieces - a reference to the ZIM Container that holds all items on the board num - a read only number of rows and cols in the board size - a read only width and height of the tile (before isometrics applied) info - the info array of rows and cols - see the info parameter for more... info when making an update to info, the update() method will be needed to see a change in the board note: using the arrows or swiping will automatically update so items off screen do not need updating data - an array of rows and cols that represents the info's data property of the current board squares this can be passed in to path finding such as EasyStar to find a path on the board note: this is info data only for the tiles, not all of the info data from the info array numCols - the total number of columns in the info (not the board) numRows - the total number of rows in the info (not the board) startCol - the index of the info to place at the left of the board this is one way to move the board and is used by the arrows and swiping also see the positionBoard(col, row) method startRow - the index of the info to place at the top of the board buffer - get or set how many squares moving item is from edge before camera is nudged arrows - Boolean to get or set the arrows - if true, arrows will be applied when needed isometric - get or set the isometric (true) or flat (false) view of the board the board is scaled up 20% going from iso to flat and down 20% going from flat to iso this just helps it visually appear similar in size currentTile - a reference to the selected tile lastTile - a reference to the tile selected before the current selected tile path - a reference to the visible path if there is one showing PROPERTIES for Tile boardCol - the visible column index of the tile boardRow - the visible row index of the tile PROPERTIES for item boardCol - get the visible column index of the tile (negative if left of board) boardRow - get the visible column index of the tile (negative if right of board) moving - get whether the item is moving (also moving event on board) nextCol - after movingstart event, get the next visible column index of the tile (negative if left of board) nextRow - after movingstart event, get the visible column index of the tile (negative if right of board) boardTile - get the tile under the item square = a string of "row-col" - so "0-0", "0-1", "0-2", etc. and "3-2" is third row, second column NOTE the Board extends a zim.Container so also has all container properties EVENTS dispatches a "change" event on board for each time a different tile is selected or rolled over dispatches a "positioned" event on item when item is finally placed on a tile dispatches a "movingstart" event on item when item starts being animated from tile to tile dispatches a "moving" event on item when item is being animated from tile to tile dispatches a "movingdone" event on item when item is finished being animated (500ms delay) CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Person(shirt, pants, head, outline, player, cache)

Person zim class - extends a zim.Container which extends a CreateJS Container ** MUST import zim_game - see https://zimjs.com/es6.html#MODULES DESCRIPTION A very generic person in isometric view sized to work with ZIM Board See: https://zimjs.com/iso/ for a full example EXAMPLE

const board = new Board().center();
board.add(new Person(), 5, 4); // random person
// or specify:
board.add(new Person(green,brown,dark), 4, 5);

PARAMETERS supports DUO - parameters or single object with properties below shirt - (default random ZIM color) the shirt color - any CSS color is fine "gold", "#C33", etc. pants - (default random ZIM color) the pants color head - (default random skin color) the head color outline - (default dark) the outline color for the head player - (default false) set to true if main player - then type="Me" not "Player" cache - (default false) probably only cache if lots of players PROPERTIES type - either "Person" or "Me" if player parameter is true ** If added to ZIM Board receives these properties: boardCol - get the visible column index of the tile (negative if left of board) boardRow - get the visible column index of the tile (negative if right of board) moving - get whether the item is moving (also moving event on board) boardTile - get the tile under the item square = a string of "row-col" - so "0-0", "0-1", "0-2", etc. and "3-2" is third row, second column Plus all the methods and properties of a ZIM Container and CreateJS Container Note: if added to a ZIM Board, use the Board methods to manipulate CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Orb(radius, color, color2, accentColor, accentColor2, flat, alpha, time, delay)

Orb zim class - extends a zim.Container which extends a CreateJS Container DESCRIPTION A very generic orb with two styles - flat and shaded ** MUST import zim_game - see https://zimjs.com/es6.html#MODULES See: https://zimjs.com/iso/ for a full example EXAMPLE

const board = new Board().center();
board.add(new Orb(), 2, 2); // flat
// or shaded with pulse:
board.add(new Orb({flat:false, color2:pink, accentColor2:white, delay:5000}), 4, 2);

PARAMETERS supports DUO - parameters or single object with properties below radius (default 16 flat or 22 not) - the radius of the orb color (default blue flat or purple not) - the color of the orb - any CSS color is fine too color2 (default darker flat or null (color) not) - core color if flat, pulse color if shaded accentColor (default null flat or pink not) - border color if flat, highlight color if shaded accentColor2 (default null) - border color of core if flat, highlight color of pulse if shaded flat (default true) - set to false to see shaded orb alpha (default .5) - the alpha to animate the color to if flat (keeps core) or the pulse to if shaded time (default 1s) - the time to animate the pulse (shaded only). Also see ZIM TIME constant delay (default 1s) - the delay until the animation of the pulse happens (shaded only). Also see ZIM TIME constant PROPERTIES type - "Orb" ** If added to ZIM Board receives these properties: boardCol - get the visible column index of the tile (negative if left of board) boardRow - get the visible column index of the tile (negative if right of board) color - the color of the orb color2 - the color2 of the orb moving - get whether the item is moving (also moving event on board) boardTile - get the tile under the item square = a string of "row-col" - so "0-0", "0-1", "0-2", etc. and "3-2" is third row, second column Plus all the methods and properties of a ZIM Container and CreateJS Container Note: if added to a ZIM Board, use the Board methods to manipulate CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Tree()

Tree zim class - extends a zim.Container which extends a CreateJS Container ** MUST import zim_game - see https://zimjs.com/es6.html#MODULES DESCRIPTION A very generic tree in isometric view sized to work with ZIM Board See: https://zimjs.com/iso/ for a full example EXAMPLE

const board = new Board().center();
board.add(new Tree(), 6, 6);

PROPERTIES type - "Tree" ** If added to ZIM Board receives these properties: boardCol - get the visible column index of the tile (negative if left of board) boardRow - get the visible column index of the tile (negative if right of board) moving - get whether the item is moving (also moving event on board) boardTile - get the tile under the item square = a string of "row-col" - so "0-0", "0-1", "0-2", etc. and "3-2" is third row, second column Plus all the methods and properties of a ZIM Container and CreateJS Container Note: if added to a ZIM Board, use the Board methods to manipulate CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Timer(time, step, colon, down, isometric, startPaused, size, font, color, backgroundColor, borderColor, borderWidth, align, valign, bold, italic, variant, width, height, decimals)

Timer zim class - extends a zim.Label which extends a CreateJS Container ** MUST import zim_game - see https://zimjs.com/es6.html#MODULES DESCRIPTION A timer that can count up or down and be set to isometric See: https://zimjs.com/iso/ for a full example EXAMPLE

const timer = new Timer({
   time:60,
   borderColor:dark,
   isometric:LEFT // isometric for left side of board
}).loc(100,100);

PARAMETERS supports DUO - parameters or single object with properties below time - (default 60) time in seconds to start the timer step - (default 1) step in s to show a change in timer colon - (default false) add colon and seconds eg. 1:30 instead of 90 seconds down - (default true) set to false to count up isometric - (default null) set to LEFT or RIGHT to position an isometric timer startPaused - (default false) set to true to start the timer paused - then use timer.start(num) size - (default 36) the size of the font in pixels font - (default arial) the font or list of fonts for the text color - (default black) color of font (any CSS color) backgroundColor - (default yellow) color of background (any CSS color) borderColor - (default null) the color of the border borderWidth - (default null) thickness of the border align - ((default CENTER) text registration point alignment also LEFT and RIGHT valign - (default CENTER) vertical registration point alignment alse "middle / center", "bottom" borderColor - (default null) the color of the border borderWidth - (default null) thickness of the border bold - (default false) set the font to bold italic - (default false) set the font to italic variant - (default false) set to true to set the font to "small-caps" width - (default 150) the width of the timer - can also leave defaults and scale timer height - (default 60) the height of the timer decimals - (default 1 when no colon) the places parameter to pass to zim decimals internally METHODS start(time) - start the timer pause(state) - state defaults to true to pause, set to false to unpause stop() - stop the timer and set paused to null - does not change time property PROPERTIES type - "Timer" time - get or set the time of the timer totalTime - get the start time of the timer paused - get or set the paused state of the timer with Boolean true or false isometric - get or set the isometric - false, LEFT, RIGHT intervalID - access to the intervalID of the timer - use clearInterval(timer.intervalID) Plus all the methods and properties of a ZIM Label and CreateJS Container EVENTS Dispatches a "step" event for each step the timer takes Dispatches a "complete" event when the timer counts down to 0 there is no complete event for counting up - use logic in step event function to handle that CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Scorer(score, isometric, size, font, color, backgroundColor, borderColor, borderWidth, align, valign, bold, italic, variant, width, height)

Scorer zim class - extends a zim.Label which extends a CreateJS Container ** MUST import zim_game - see https://zimjs.com/es6.html#MODULES DESCRIPTION A score label with backing set and isometric settings See: https://zimjs.com/iso/ for a full example EXAMPLE

const scorer = new Scorer({backgroundColor:yellow, color:black, isometric:RIGHT}).loc(W-100,100);

PARAMETERS supports DUO - parameters or single object with properties below score - (default 0) set the start score isometric - (default null) set to LEFT or RIGHT to position an isometric scorer size - (default 36) the size of the font in pixels font - (default arial) the font or list of fonts for the text color - (default black) color of font (any CSS color) backgroundColor - (default green) the color of the background (any CSS color) borderColor - (default null) the color of the border borderWidth - (default null) thickness of the border align - ((default CENTER) text registration point alignment also LEFT and RIGHT valign - (default CENTER) vertical registration point alignment also MIDDLE / CENTER, "bottom" bold - (default false) set the font to bold italic - (default false) set the font to italic variant - (default false) set to true to set the font to "small-caps" width - (default 150) the width of the scorer - can also leave defaults and scale scorer height - (default 60) the height of the scorer PROPERTIES type - "Scorer" score - get or set the score isometric - get or set the isometric - false, LEFT, RIGHT Plus all the methods and properties of a ZIM Label and CreateJS Container CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Dialog(width, height, words, dialogType, tailType, fill, size, font, color, backgroundColor, borderColor, borderWidth, align, valign, corner, shadowColor, shadowBlur, padding, paddingH, paddingV, shiftH, shiftV, slantLeft, slantRight, slantTop, slantBottom, tailH, tailV, tailShiftH, tailShiftV, tailShiftAngle, arrows, arrowsInside, arrowsFlip, index, selectedIndex)

Dialog zim class - extends a zim.Container which extends a createjs.Container ** MUST import zim_game - see https://zimjs.com/es6.html#MODULES DESCRIPTION Shows a Dialog in various formats with or without a tail. This can have multiple sets of words to show with optional arrows. The text can be made to fill the dialog - use padding to make it fit well due to corners. Or a if fill is turned off then use a font size to keep constant size across word sets. The dialogTypes are slant (default), rectangle (can have corners set), oval and poly. The tailTypes are triangle (default), line, circles and none. SEE: https://zimjs.com/nft/bubbling/dialog.html NOTE the Dialog backing is made up of multiple shapes to get a proper border effect if an alpha is desired then cache the backingContainer and set its alpha NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

const dialog = new Dialog(300,200,"HELLO!").center();

EXAMPLE

const words = [
   "Welcome, Creators!",
   "To ZIM NFT 01",
   "We have a new Dialog"
];

STYLE = {lineHeight:35}
new Dialog({
   width:300,
   height:200,
   words:words,
   dialogType:"rectangle",
   tailType:"line",
   fill:false,
   size:30,
   font:"Comic Sans MS",
   color:dark,
   backgroundColor:yellow,
   borderColor:grey,
   borderWidth:2,
   corner:100,
   padding:50,
   tailH:RIGHT,
   tailV:BOTTOM
}).pos(100,50,LEFT,TOP);

EXAMPLE

const dialog = new Dialog(300,200,"HELLO!").center();
dialog.backingContainer.cache().alp(.5); // adjusting alpha of backing

PARAMETERS ** supports DUO - parameters or single object with properties below width - (default 640) width of dialog height - (default 480) height of dialog words - (default "HELLO!") words to say in the dialog - or an array of words if an array is chosen then arrows will be added (unless arrows is set to false) arrows can be used to go to sets of words - or use index property to change the setWords() method can be used to change the words in a Dialog dialogType - (default "slant") the shape of the dialog box set to slant will make a slanted box that can be controlled with slantLeft, slantRight, slantTop, slantBottom parameters set to "rectangle" for dialog box. Can use corner of half the height to make a longer rounded box set to "oval" for traditional speach bubble - use width and height to adjust set to "poly" for a Pow! dialog - probably set the tailType to "none" tailType - (default "triangle") the shape of the tail of the dialog types are "triangle", "line", "circles" or "none" circles gives a thought bubble the tail can be positioned with tailH and tailV parameters the tail can be shifted with tailShiftH, tailShiftV and tailShiftAngle fill - (default true) set to false to not fill the dialog with text when true, use the padding (or paddingH and paddingV) to addjust the size of the text in the dialog fill of true will ignore size size - (default 40) the size of the font size is ignored if fill is set to true font - (default "verdana") the font of the text color - (default dark) the color of the text backgroundColor - (default light) the color of the dialog box borderColor - (default dark) the border color of the dialog box set the border color to -1 to have no border borderWidth - (default 3) the size of the border set the borderWidth to 0 to have no border align - (default CENTER) the horizontal alignment of the text (also LEFT and RIGHT) see also shiftH valign - (default CENTER) the vertical alignment of the text (also TOP and BOTTOM) see also shiftV corner - (default 0) the corner of rectangle with the "rectangle" dialogType set can also be an array of [leftTop, rightTop, rightBottom, leftBottom] shadowColor - (default rgba(0,0,0,.3)) the shadow color set to -1 for no shadow shadowBlur - (default 10) the shadow blur padding - (default 20) the padding between the border of the dialog and the text paddingH - (default padding) the vertical horizontal paddingV - (default padding) the vertical padding shiftH - (default 0) an amount (+ or -) to shift the text horizontally after it is placed shiftV - (default 0) an amount (+ or -) to shift the text vertically after it is placed slantLeft - (default -10) when dialogType "slant" is chosen, relative angle to slant the left side slantRight - (default 10) when dialogType "slant" is chosen, relative angle to slant the right side slantTop - (default -10) when dialogType "slant" is chosen, relative angle to slant the top side slantBottom - (default 10) when dialogType "slant" is chosen, relative angle to slant the bottom side tailH - (default LEFT) where to put the tail in the horizontal - options are LEFT, CENTER, RIGHT also see the tail property and the three tailShift parameters tailV - (default BOTTOM) where to put the tail in the vertical - options are BOTTOM, CENTER, TOP also see the tail property and the three tailShift parameters tailShiftH - (default 0) an amount (+ or -) to shift the tail horizontally after it is placed tailShiftV - (default 0) an amount (+ or -) to shift the tail vertically after it is placed tailShiftAngle - (default 0) an amount (+ or -) to shift the tail angle after it is placed arrows - (default false - true if words is array) set to false to not show arrows also see the arrowNext and arrowPrev property arrowsInside - (default false) set to true to show arrows inside the dialog to shift the arrows afterwards, use the arrowNext and arrowPrev properties along with mov() arrowsFlip - (default false) make the next arrow on the left and the prev arrow on the right index - (default 0) set the selected index of the word groups if words is an array also see the index property selectedIndex - same as index, kept in for backwards compatibility in ZIM DUO METHODS setWords(words, index) - pass in a string of words to show or an array this will change the words in the dialog also pass in an optional index to jump to returns object for chaining next() - go to next words - returns object for chaining see also index property prev() - go to previous words - returns object for chaining see also index property clone() - clone the dialog dispose() - remove the dialog and its parts ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - name of class as a string color - get or set the color of the text backgroundColor - get or set the backgroundColor of the dialog // see backingContainer for setting alpha borderColor - get or set the borderColor of the dialog // NOTE: must start with border when object made to then change a borderColor backingContainer - a reference to the container that holds all the backing including backing, backingShadow and tail cache this and set its alpha if a different alpha is desired otherwise all the parts keep overlapping alpha and revealed backing - reference to backing of dialog backingShadow - if a shadow is set then this is the container that holds a clone of the backing and tail and then it is cached and a shadow added label - the ZIM Label with the current text labels - an array of ZIM labels matching the words words - an array of sets of words in the dialog - if only one set of words then the words are words[0] index - get or set the index of the word sets (will adjust arrows if there are arrows) tail - reference to the tail object arrows - reference to the container that holds both arrows arrowNext - reference to the next arrow arrowPrev - reference to the prev arrow ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS dispatches a "change" event when arrows are pressed to go to next or prev page See the CreateJS Easel Docs for Container events such as: click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Three(width, height, color, cameraPosition, cameraLook, interactive, resize, frame, ortho, textureActive, colorSpace, colorManagement, legacyLights, throttle, lay, full, xr, VRButton, xrBufferScale)

Three zim class ** MUST import zim_three - see https://zimjs.com/es6.html#MODULES DESCRIPTION three.js is a 3D JavaScript Library at https://threejs.org. The ZIM Three class along with the ZIM three.js helper module will make a three.js renderer, scene and camera that are integrated into ZIM with the DOMElement from CreateJS. The Three class handles positioning, scaling and resizing. Or, the Three class can be used to help show ZIM in threejs as an interactive and animated canavs texture. See also TextureActive and TextureActives in the main ZIM docs. three.js examples - with three.js inside ZIM https://zimjs.com/bits/view/three.html https://zimjs.com/three/ https://codepen.io/zimjs/pen/abzXeZX https://codepen.io/zimjs/pen/qGPVqO TextureActive examples - with ZIM inside three.js https://zimjs.com/015/textureactive.html https://zimjs.com/015/textureactive2.html https://zimjs.com/015/textureactive3.html https://zimjs.com/015/textureactive4.html https://zimjs.com/015/textureactive5.html https://zimjs.com/015/textureactive_hud.html https://zimjs.com/015/textureactive_hud_raw.html https://zimjs.com/015/textureactive_raw.html ZIM in VR https://zimjs.com/015/vr.html - use triggers (drag), sticks (motion) and b and y buttons (teleport) Z-Dog is a quick alternative for three.js - here are a couple examples https://codepen.io/zimjs/pen/joXxGJ https://codepen.io/zimjs/pen/rgEEXy NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// up top after loading CreateJS and ZIM add the latest versions of these files
// https://zimjs.org/cdn/r109/three.min.js
// https://zimjs.org/cdn/r109/OrbitControls.js
// https://zimjs.org/cdn/three_2.2.js

// In the ZIM Frame create a backing rectangle that will show where the three.js scene is
new Rectangle(500,500,dark).center();

// Create the Three object and scene (just store that in an easy variable)
// We set threejs interactive so we can use three.js orbit controls (needs a separate file imported)
// In the above examples at the URLs, we use a ZIM Swiper instead
const three = new Three({frame:F, width:500, height:500, interactive:true});
const scene = three.scene;

// Here we make a three.js Cube - note the THREE namespace
// There are all sorts of Geometries (shapes) - see the three.js Docs
// We will give each side a color using a Material
const geometry = new THREE.CubeGeometry(100, 100, 100);
const materials = [];
// x+,x-,y+,y-,z+,z- (+x right, +y up and +z out)
const colors = [green, blue, brown, yellow, orange, pink];
loop(colors, color=> {
   materials.push(new THREE.MeshBasicMaterial({color:color, side:THREE.FrontSide}));
});

// We mesh the Geometry and the Material to get a Mesh object that we put on the Scene
const mesh = new THREE.Mesh(geometry, materials);
mesh.position.set(0,0,0);
scene.add(mesh);

// Here we add optional the three.js OrbitControls
const controls = new THREE.OrbitControls(three.camera, three.renderer.domElement);

// This is an example of controlling the three.js object with ZIM
// Remember that rotation in three.js is in Radians so multiply degrees by ZIM RAD
const dial = new Dial({min:0, max:360, step:0, continuous:true}).pos(70,0,LEFT,CENTER).change(()=>{
   mesh.rotation.y = dial.value*RAD;
});

PARAMETERS ** supports DUO - parameters or single object with properties below width - (default ZIM Frame width) the width to make the three.js canvas height - (default ZIM Frame height) the height to make the three.js canvas color - (default null - transparent) a CSS color (no transparency on color - just leave off to set transparent) cameraPosition - (default new THREE.Vector3(0, 200, 200)) to position the camera in x, y and z cameraLook - (default scene.position) where the camera should look interactive - (default false) set to true to be able to use addEventListener on three.js canvas rectangle note: you will not be able to use ZIM interaction that overlaps the three.js canvas note: this will be set to true if textureActive is true resize - (default true) set to false to not automatically resize (position and scale three object) frame - (default the zimDefaultFrame) the ZIM Frame object ortho - (default false) set to true to add an orthographic camera basically a flat scene the normal camera is there still but the ortho camera sits on top from z depth of 0 to 10 this is good for HUD elements around the edges of scene or a pop-up panel, etc. textureActive - (default false) set to true to configure proper scaling for TextureActive objects where ZIM is inside three.js on textures also see the makePanel() and flipMaterial() methods below also overrides interactive and sets it as true colorSpace - (default THREE.LinearSRGBColorSpace) set to THREE.SRGBColorSpace, etc. https://threejs.org/docs/#manual/en/introduction/Color-management colorManagement - (default false) set to true to activate three.js colorManagement https://threejs.org/docs/#manual/en/introduction/Color-management legacyLights - (default false) set to true to activate legacyLights - depricated throttle - (default false) set to a whole number like 2 to only update every second requestAnimationFrame lay - (default null) set to OVER or UNDER to overlay or underlay full window three.js Also use interactive:true for interacting with three.js or interactive:false for interacting with ZIM full - (default false) set to true to force three.js to full window Use ZIM in Frame scaling:FULL and ZIM Central() to match ZIM scaling with three.js fullscreen scaling See: https://zimjs.com/three/central.html xr - (default false) set to true to make the renderer prepared for XR (AR/VR) this works with TextureActive as well also see XRControllers(), XRMovement() and XRTeleport() classes VRButton - (default true if xr is true and will add a VRButton if using zim_three import) adds an ENTER VR button or pass in the VRButton class from three.js if not using the zim_three import xrBufferScale - (default 2) magnification of scene - 2 makes for better quality in VR METHODS position(x, y) - position the three.js canvas (registration point in center) to the stage coordinates scale(s) - (default 1) scale the three.js canvas relative to the stage scale rotateAroundAxis(obj, axis, radians) - rotates an obj around a world axis (THREE.Vector3(x,y,z)) a certain amount of Radians rotateAroundObjectAxis(obj, axis, radians) - rotates an object around an internal axis (THREE.Vector3(x,y,z)) a certain amount of Radians makePanel(textureActive, textureActives, scale, curve, opacity, material, doubleSide, colorSpace) | supports DUO used for textureActives to make a panel based on the tetureActive size textureActive - a ZIM TextureActive object see https://zimjs.org/spells.html?item=TextureActive textureActives - a ZIM TextureActives object see https://zimjs.org/spells.html?item=TextureActives scale (default .5) change to adjust the width and height of the geometry curve (default null) change the z amount to curve the geometry - also can use negative amount opacity (default 1) change to set the opacity of the material, can also set opacity on the TextureActve material (default THREE.MeshBasicMaterial) a three.js material example THREE.MeshPhongMaterial, THREE.MeshLamberMaterial - both these need lights doubleSide (default false) set to true to do double sided material colorSpace (default null) see https://threejs.org/docs/#manual/en/introduction/Color-management returns a three.js mesh with the textureActive object set as a CanvasTexture This will also have the TextureActives.addMesh() method applied with the layer matching the TextureActives layer setting All this can be done manually in three.js - it is just a wrapper function to make panels See https://zimjs.com/015/textureactive_raw.html for a manual example - scroll down to the THREE section and see MENU ** if being used for a HUD in sceneOrtho then see the pos() method below for METHODS ON MESH posMesh(mesh, x, y, horizontal, vertical, gutter) - use for sceneOrtho makePanel meshes position a mesh on the sceneOrtho around the edges or middle as follows: x - default 0 - the distance in the x y - default 0 - the distance in the y horizontal - default LEFT - set to LEFT, CENTER, RIGHT to specify where the distance is applied horizontally horizontal - default TOP - set to TOP, CENTER, BOTTOM to specify where the distance is applied vertically gutter - default 0 - distance in the horizontal middle to keep left and right away from each other the left and right will stop squeezing and possibly go off the screen when the window is reduced flipMaterial(materialType, params) - flip about the y access a material This will set the userData.ta_flipped to true which guides the TextureActives raycasting on the UV x coordinate The params are the regular parameter object that would be passed to the material such as color, map, transparency, alpha, etc. Used primarily on a THREE.BoxGeometry where the back of the box by default is flipped so words would be backwards... this puts them frontwards See https://zimjs.com/015/textureactive4.html scroll down to the THREE section and see PICKERS Note a second texture must be made and passed to flipMaterial in the params as the map curvePlane(geometry, z) - curves a THREE.PlaneGeometry but a z value (positive or negative) adjusts the Geometry in place - used internally by makePanel dispose() - clears geometries, materials, stops the renderer, removes scene and sets internal variables to null make sure the three reference is set to null: myThree.dispose(); mythree = null; // same for any dispose - ZIM cannot set your variables to null METHODS ON MESH pos(x,y,horizontal,vertical,gutter) - DEPRECATED - see posMesh() method PROPERTIES renderer - the three.js WebGLRenderer (see three.js Docs) preRender - a function to call just before rendering three.preRender = ()=>{controls.update();} // will run in renderer just before rendering postRender - a function to call just after rendering three.postRender = ()=>{controls.update();} // will run in renderer just after rendering canvas - the HTML canvas tag for the three.js scene with id=zimThree0 for first, zimThree1 for second, etc. can use if you need to set z-index for multiple three canvas objects DOMElement - the CreateJS DOMElement object - see CreateJS EaselJS docs scene - the three.js scene object created (see three.js Docs) sceneOrtho - the three.js orthographic scene if ortho is set to true this has a near/far setting of 0/10 so the z value of an object in this scene must be between 0 and 10 camera - the three.js PerspectiveCamera object created (See the three.js Docs) cameraOrtho - the three.js OrthographicCamer object if orth is set to true resizeEvent - a handle to the resize event so it can be cleared: F.off("resize", threeObj.resizeEvent); then make your own resize event to custom position and scale your three object use threeObj.position() and threeObj.scale() see ZIM Bits example vrButton - reference to the VRButton if xr and VRButton is true CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

XRControllers(three, type, color, highlightColor, lineColor, lineLength, threshhold)

XRControllers zim class - extends a createjs.EventDispatcher ** MUST import zim_three - see https://zimjs.com/es6.html#MODULES DESCRIPTION Adds XR (AR/VR) controllers to three.js. This comes with built in ZIM controllers or can pass in three.js controllers. ZIM Controllers are laser, pen, gun, raygun and sword or line. They will highlight when trigger is pressed. They provide events for all the buttons and axes. See https://zimjs.com/015/vr/controllers.jpg for details. The XRControllers object holds controller1 and controller2. Both are not required, an array of two items can be used as type input. Passing in -1 will not make a controller. The XRControllers object can be passed to XRMovement() and XRTeleport() to handle motion. There is a three.js class that will mimic the best model for the actual controllers. import { XRControllerModelFactory } from 'three/addons/webxr/XRControllerModelFactory.js'; and then you have to use the whole GitHub structure of three.js to get them to work. See: https://github.com/mrdoob/three.js/blob/dev/examples/webxr_vr_teleport.html The three.js controller objects you can then pass in to type:[obj, obj] SEE: https://zimjs.com/015/vr.html and use triggers (drag), sticks (motion) and b and y buttons (teleport) NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// import zim_three
const three = new Three({
   width:window.innerWidth,
   height:window.innerHeight,
   cameraPosition:new THREE.Vector3(0,3,6),
   textureActive:true, // if wanting TextureActives
   xr:true
});

// make skybox, add meshes to scene, etc.
// might add a floor mesh

// xrControllers parameters:
// three, type, color, highlightColor, lineColor, lineLength, threshhold

const xrControllers = new XRControllers(three, "laser"); // "laser" is default

xrControllers.on("xrconnected", () => {

   // wait for controllers to connect before adding movement and teleport
   
   // XRMovement parameters:
   // three, XRControllers, speed, acceleration, rotationSpeed, rotationAcceleration, hapticMax, verticalStrafe, radiusMax
   var xrMovement = new XRMovement(three, xrControllers);

   // XRTeleport parameters:
   // three, XRControllers, XRMovement, floor, offsetHeight, button, hand, markerColor, markerBlend
   new XRTeleport(three, xrControllers, xrMovement, floor, 4); // top front round buttons (B and Y)

   // note: to teleport through a mesh, set the mesh.userData.xrteleportignore = true;

});

PARAMETERS ** supports DUO - parameters or single object with properties below three - the ZIM Three object type - (default "laser") type of controllers or an array of [type, type] can be: laser, pen, gun, raygun, sword, line or -1 in the array. or can be a three.js model from XRControllerModelFactory if using a three.js model, must use the array with the desired model objects any of these can be a mix or just one (set the other to -1) color - (default light) set the color of the material (can also be an array for left and right) highlightColor - (default ["violet", blue]) an array for the highlight colors lineColor - (default light) set the color of the line or use an array for left and right lineLength - (default 5) the line length or pass in an array for left right one day, this may adjust to whatever it is hitting threshhold - (default .2) a sensitivity filter - use a higher number to avoid drift METHODS dispose() - remove controllers PROPERTIES type - name of class as a string XR - read only - will be true when XR is active (see xrconnected event) controller1 - a reference to the renderer.xr.getController(0) controller2 - a reference to the renderer.xr.getController(1) threshhold - get or set the controller threshhold Controller properties: grip - if a three.js model is provided, it is stored in a grip three.js Group holder - if a ZIM controller are used it is stored in a holder three.js Group gamepad - lots of data once the xrconnected event is triggered userData.highlights - an array of materials to change to the highlight color this already will have materials so perhaps use push() EVENTS (also see GENERAL EVENTS) xrconnected - dispatched when XR controllers connect - has an event object with data property xrdisconnected - dispatched when XR controllers disconnect ** below events have the following event object (eg. e) properties: e.controller - the controller e.num - the number of the button - see https://zimjs.com/015/vr/controllers.jpg 0 - trigger 1 - squeeze 2 - touchpad (basic only - not complex controllers) 3 - top of stick 4 - A or X raised button on top 5 - B or Y raised button on top e.hand - "left" (controller1) or "right" (controller2) e.value - normalized number from 0-1 of touch pressure pressdown - dispatched when any XR controller button is down pressup - dispatched when any XR controller button is up touchstart - dispatched when XR controller touch starts touchend - dispatched when XR controller touch ends ** the axes event object (eg. e) has an additional property to the above ** to tell if the value is horizontal or vertical e.dir - "horizontal" or "vertical" axes - dispatched when XR controller stick pushed GENERAL EVENTS selectstart - dispatched when either controller trigger is pressed down selectend - dispatched when either controller trigger is pressed up move - dispatched when either controller is moved controllerleftdown - dispatched when left XR controller trigger is pressed down controllerrightdown - dispatched when right XR controller trigger is pressed down controllerleftup - dispatched when left XR controller trigger is pressed up controllerrightup - dispatched when right XR controller trigger is pressed up controllerleftmove - dispatched when left XR controller is moving controllerrightmove - dispatched when right XR controller is moving CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

XRMovement(three, XRControllers, speed, acceleration, rotationSpeed, rotationAcceleration, hapticMax, verticalStrafe, radiusMax, threshhold, directionFix, boxMax, rotationAngle, rotationInterval)

XRMovement zim class ** MUST import zim_three - see https://zimjs.com/es6.html#MODULES DESCRIPTION Adds XR (AR/VR) movement to three.js. Pass in ZIM XRControllers and use thumbsticks to move. By default both hands move forward and backwards with vertical stick motion. The left hand strafes left and right with horizontal stick motion. The right hand rotates left and right with horizontal stick motion. The squeeze (handle grips) will increase the speed. Pressing the left thumbstick top will reset the position. SEE: https://zimjs.com/015/vr.html and use triggers (drag), sticks (motion) and b and y buttons (teleport) NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// import zim_three
const three = new Three({
   width:window.innerWidth,
   height:window.innerHeight,
   cameraPosition:new THREE.Vector3(0,3,6),
   textureActive:true, // if wanting TextureActives
   xr:true
});

// make skybox, add meshes to scene, etc.
// might add a floor mesh

// xrControllers parameters:
// three, type, color, highlightColor, lineColor, lineLength, threshhold

const xrControllers = new XRControllers(three, "laser"); // "laser" is default

xrControllers.on("xrconnected", () => {

   // wait for controllers to connect before adding movement and teleport
   
   // XRMovement parameters:
   // three, XRControllers, speed, acceleration, rotationSpeed, rotationAcceleration, hapticMax, verticalStrafe, radiusMax
   var xrMovement = new XRMovement(three, xrControllers);

   // XRTeleport parameters:
   // three, XRControllers, XRMovement, floor, offsetHeight, button, hand, markerColor, markerBlend
   new XRTeleport(three, xrControllers, xrMovement, floor, 4); // top front round buttons (B and Y)

   // note: to teleport through a mesh, set the mesh.userData.xrteleportignore = true;

});

PARAMETERS ** supports DUO - parameters or single object with properties below three - the ZIM Three object XRControllers - the ZIM XRControllers object speed - (default 1) the speed of motion acceleration - (default .3) the acceleration of motion rotationSpeed - (default 1) the turning speed rotationAcceleration - (default .2) the turning acceleration hapticMax - (default 0) motion will trigger this much haptic response if available (handle vibration) verticalStrafe - (default false) make left controller change up and down (elevation) rather than forward backwards motion radiusMax - (default -1) set to a number to prevent movement beyond this radius threshhold - (default .2) a sensitivity filter - use a higher number to avoid drift directionFix - (default true) adjust direction from absolute to relative - needed in R155 set to false for R149 - or if three.js version seems to have direction wrong when using controllers boxMax - (default null) set to an array with 6 numbers for min/max in x, y, z [xMin, xMax, yMin, yMax, zMin, zMax] this prevents the dolly from going past these values can still use radiusMax but will probably use one or the other rotationAngle - (default null) set to an angle in degrees to override rotationSpeed and rotate specific angles also see rotationInterval which sets how long to wait if rotation is held active set rotationAngle to 0 to not rotate rotationInterval - (default .5 seconds) time in seconds to rotate again if rotationAngle is set and control rotation held down METHODS doHaptic() - trigger haptic response if available (amount, hand, max) dispose() - remove movement PROPERTIES type - name of class as a string dolly - the three.js Group that holds the controllers and the camera dolly has a userData.rotationY property for radians of rotation about y it seems to have some sort of Euler rotations which just go from -90 to 90 annoying so this is a record of rotation applied - use with multi-user for instance to send data speed - get or set the speed of motion acceleration - get or set the acceleration of motion rotationSpeed - get or set the turning speed rotationAcceleration - get or set the turning acceleration hapticMax - get or set the maximum haptic response if available on motion (handle vibration) verticalStrafe - get or set whether the left controller will change up and down (elevation) instead of forward backwards motion radiusMax - get or set set the number to prevent movement beyond this radius threshhold - get or set the sensitivity filter - use a higher number to avoid drift CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

XRTeleport(three, XRControllers, XRMovement, floor, offsetHeight, button, hand, markerColor, markerBlend, markerRadius)

XRTeleport zim class ** MUST import zim_three - see https://zimjs.com/es6.html#MODULES DESCRIPTION Adds XR (AR/VR) teleport to three.js. Pass in ZIM XRControllers and XRMovement and use buttons to teleport - requires some sort of floor. By default the B and Y top front buttons will teleport. This could be changed to the triggers or all could do a teleport. There can be multiple floors. Meshes can be teleported through by setting the mesh.userData.xrteleportignore = true; Teleport will leave a circle on the floor on press down and then activate on press up. SEE: https://zimjs.com/015/vr.html and use triggers (drag), sticks (motion) and b and y buttons (teleport) NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// import zim_three
const three = new Three({
   width:window.innerWidth,
   height:window.innerHeight,
   cameraPosition:new THREE.Vector3(0,3,6),
   textureActive:true, // if wanting TextureActives
   xr:true
});

// make skybox, add meshes to scene, etc.
// might add a floor mesh

// xrControllers parameters:
// three, type, color, highlightColor, lineColor, lineLength, threshhold

const xrControllers = new XRControllers(three, "laser"); // "laser" is default

xrControllers.on("xrconnected", () => {

   // wait for controllers to connect before adding movement and teleport
   
   // XRMovement parameters:
   // three, XRControllers, speed, acceleration, rotationSpeed, rotationAcceleration, hapticMax, verticalStrafe, radiusMax
   var xrMovement = new XRMovement(three, xrControllers);

   // XRTeleport parameters:
   // three, XRControllers, XRMovement, floor, offsetHeight, button, hand, markerColor, markerBlend
   new XRTeleport(three, xrControllers, xrMovement, floor, 4); // top front round buttons (B and Y)

   // note: to teleport through a mesh, set the mesh.userData.xrteleportignore = true;

});

PARAMETERS ** supports DUO - parameters or single object with properties below three - the ZIM Three object XRControllers - the ZIM XRControllers object XRMovement - (default null) if an XRMovement object is being used then pass it in here if provided then teleport moves the XRMovement dolly floor - (default null) provide a three.js mesh or an array of three.js meshes offsetHeight - (default 0) keep the dolly or camera this high above the floor button - (default 4) the B and Y buttons but can be an array of numbers - see https://zimjs.com/015/vr/controllers.jpg hand - (default "both") set to "left" or "right" (or "both") to set the controllers for teleporting markerColor - (default silver) the color of the circular marker markerBlend - (default THREE.AdditiveBlending) the blend of the circular marker markerRadius - (default) set the marker radius METHODS dispose() - remove teleport PROPERTIES type - name of class as a string floor - get or set the array of floor meshes button - get or set the array of buttons to activate the teleport hand - get or set the hand(s) to use for the teleport ("left", "right", "both") marker - get the marker mesh CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

Socket(server, appName, roomName, maxPeople, fill, initObj)

Socket zim class extends a zim EventDispatcher (with the normal event object replaced by a data param) ** MUST import socket.io.js with a script tag - SEE link at top of Docs for socket.io.js under ZIM works with... ** MUST import zim_socket - see https://zimjs.com/es6.html#MODULES ** MUST request a ZIM Socket Server ID or have a NodeJS server running zimserver.js with SocketIO on server (and client as mentioned) ** MUST test on a server to avoid CORS errors See: https://zimjs.com/es6.html#MODULES OVERVIEW Sockets are how multiuser games, chats, avatars, etc. work. ZIM Socket provides code for multiuser sockets to share properties. A client (user) sends properties and receives objects of other clients' properties requires a NodeJS server running zimserver.js with SocketIO on server and client See https://zimjs.com/socket/ for details and to request using the ZIM server. DESCRIPTION ZIM Socket sets up a multiuser socket with apps and rooms (sets of rooms if max is set) There is an option to fill in empty spots from people leaving with new people or not. A client sends property changes and receives objects of other clients' properties. The server handles data, joining, leaving, changing rooms and history. This means that there is no need for server side programming. Socket examples: https://zimjs.com/cat/gallery.html https://zimjs.com/socket - there is an EXAMPLE multi-user selectable paragraph https://zimjs.com/avatar.html https://zimjs.com/chat.html https://zimjs.com/egg.html https://zimjs.com/remote.html // works with remote.html https://zimjs.com/control.html // works with control.html NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// up top after loading CreateJS and ZIM add the latest versions of these files
// https://zimjs.org/cdn/2.3.0/socket.io.js
// https://zimjs.org/cdn/zimserver_urls.js
// https://zimjs.org/cdn/zimsocket_1.1.js

// We will make a single Ball that multiple people can drag around
// In the ZIM Frame here is the preparation and the code:

// For the first parameter:
// The zimSocketURL comes from zimserver_urls.js and points to the ZIM Socket server.
// This way, if we change the server, the app will still work.

// For the second parameter:
// Went to this URL https://zimjs.com/request.html from the ZIM Socket page
// and requested a keyword "sharedball" for this app
// do not use a keyword that is already in use

const socket = new Socket(zimSocketURL, "sharedball");

// When the socket is ready we get this event
// It receives a data event of all the current data - or just ask socket.
// There is also a history of any data stored in history - like for a chat.

socket.on("ready", ()=>{
   const ball = new Circle(100, red).drag(S);

   // We will get the lastest x and y of the ball
   // all latest values are automatically loaded by Socket to start
   const x = socket.getLatestValue("x");
   const y = socket.getLatestValue("y");

   // if someone has already moved the ball then start at that position
   // otherwise, tell others to come where the ball is located
   if (x != null) {
      ball.loc(x,y);
   } else {
      ball.center();
      // we can set a single property like:
      // socket.setProperty("x", ball.x);
      // but each time we do it is a call to the server
      // so it is better to set multiple properties like so:
      socket.setProperties({x:ball.x, y:ball.y});
   }
   S.update();

   // here is the event for when we receive data from others
   // so set the ball to the latest value
   // we can also grab this information from the data parameter
   socket.on("data", data=>{
      let x = socket.getLatestValue("x");
      let y = socket.getLatestValue("y");
      if (x != null) ball.loc(x,y);
      S.update();
   });

   // send data when ball is moved
   ball.on("pressmove", ()=>{
      socket.setProperties({x:ball.x, y:ball.y});
   });

});

socket.on("error", ()=>{
   new Pane("SORRY, COULD NOT CONNECT").show();
});

EXAMPLE

// Code to handle dragging multiple objects in a Container

// There exists a letters Container holding all the letters
// There exists a lettersArray holding all the letters
// The letters are being dragged (with the default onTop:true)
// which changes the letter layer in the letters container
// sendData is being called by mousedown and pressmove events on each letter

function sendData(e) {
   let letter = e.target;
   let obj = {};
   obj["l_"+letter.num] = [letter.x, letter.y, letter.level];
   socket.setProperties(obj);
}
socket.on("data", data=>{
   loop(data, (p,d)=>{
      let [g,n] = p.split("l_"); // grab the number
      if (n >= 0) {
         // set the x, y and layer
         lettersArray[n].loc(d[0], d[1], letters, d[2]);
         S.update();
      }
   });
});

// When a new person arrives we want to recreate locations and layers
// Use socket.getLatestValue(letter); to get its location {l_0:[x,y,level]}
// The level property is only useful as the letter is being dragged
// it may become out of date as other letters are dragged
// So when recreating the layer levels, we cannot rely on the level
// Instead, we will rely on the time that the letter was last moved

// Use socket.getLatestTime(letter) to get the update time of the letter
// Store the time and index of all letters that have changed in an array
// Sort the array from smallest time to biggest time
// then loop through the array and set the letter
// in the lettersArray at the index to the top()
// NOTE - we must use the lettersArray - not the letters

const order = [];
loop(lettersArray, (letter,i)=>{
   let d = socket.getLatestValue("l_"+i);
   if (d) {
      let t = socket.getLatestTime("l_"+i);
      letter.loc(d[0], d[1], letters);
      order.push({t, i});
   }
});
order.sort((a, b) => (a.t > b.t) ? 1 : -1); // smallest to biggest
loop(order, data=>{
   lettersArray[data.i].top();
});

EXAMPLE

// Imagine that we have a Tile with thousands of colored pixels.
// we do not want to send the full data for every change.
// so we send each person's individual change to be collected and adjusted live (not shown below).
// But, when a new person arrives we want the full data.
// The trick is to use the master socket to send the data to new person as follows:

const c = [black, dark, grey, light, white, purple, pink, red, orange, yellow, green, blue];

socket.on("otherjoin", d => {
   if (socket.master) { // this socket is the current master so send data
      const colors = [];
      loop(tile.items, item=>{
         colors.push(c.indexOf(item.color));
      });
      // d.id is the id of who just joined
      socket.setProperty("colors", {id:d.id, array:colors});
   }
});

socket.on("data", d => {
   // if we are the person that just joined
   if (d.colors && d.colors.id==socket.id) {
      loop(d.colors.array, (item,i)=>{
         tile.items[i].color = c[item];
      });
      S.update();
   }
   // also there would be code to update everyone's individual changes
});

PARAMETERS ** supports DUO - parameters or single object with properties below server - (default https://localhost:3000) the server that is running node and the zimsocket.js : portNumber appName - (required) a string id (one word or joined words) and unique for your app roomName - (default "default") optional room name otherwise just uses a default room (can represent many rooms if maxPeople is set) maxPeople - (default 0) how many people are allowed per room - default is 0 which is virtually unlimited setting this to 4 will let four people share the socket and the next person in starts sharing with the next three, etc. fill - (default true) - set to false to not fill in vacated spots in a room initObj - (default null) - pass an object literal of initial properties METHODS changeRoom(appName, roomName, maxPeople, fill, initObj) - this removes socket from current room and joins appName, roomName - socket.id remains the same requestTime() - triggers a time event with parameter object holding masterTime, joinTime and currentTime requestSync() - resyncs your other clients' data, time, history and last info with the server data on(), off(), offAll() - methods inherited from zim.EventDispatcher- these work like the CreateJS on() and off() methods ** SETTING YOUR PROPERTIES setProperty(propertyName, propertyValue) - sets your property to the value and sends out change to all in room (distributes) setProperties(objectOfPropertiesToSet) - pass in an object with properties and values and it sets yours to match and distributes them ** GETTING PROPERTIES AND PROPERTY OBJECTS ** note: the relevant property objects are sent as a parameter on join, otherjoin and data events ** which means we often do not need these methods ** note: the data event sends a parameter with only the data currently being sent ** so if you want all the data belonging to the sender, use getSenderData() below getMyProperty(propertyName) - gets your own value for property name getMyData() - gets your own data object getOtherProperty(id, propertyName) - gets another client's value for property name getOtherData(id) - gets another client's object of properties getSenderProperty(propertyName) - gets sender client's value for property name getSenderData() - gets sender client's object of properties getProperties(propertyName) - returns an array of values for the propertyName of others - for x we might get [12, 14, 33, etc.] getData() - returns an object of all client objects by id (does not include this (my) client) ** GETTING LATEST INFORMATION getLatestValue(propertyName) - returns the last distributed value for the property you pass to it - could be yours getLatestTime(propertyName) - returns the server timestamp (ms from 1970) for when the latest value of the property was updated - could be yours getLatestValueID(propertyName) - returns the id of the last person to distribute a value for the property you pass to it getLatestProperties(propertyName) - returns an array of the last property names to be distributed (sometimes multiple properties are distributed at once) ** HISTORY appendToHistory(someText) - adds the text passed to it to the history file for the room (deleted if room is empty) clearHistory() - sets the history for the room to "" ** TO DISCONNECT dispose() returns void - removes listeners, closes socket, deletes data objects - must make a new Socket object to connect PROPERTIES (READ ONLY) server - the server you set applicationName - the name of your application roomName - the room name (may represent many rooms if maxPeople is set) maxPeople - see PARAMETERS fill - see PARAMETERS socket - the SocketIO client socket object ready - a ready event has been dispatched masterTime - when the server started joinTime - when socket joined the current room id - the id of the client socket master - true if the socket is the current master this can be used to run functions only once for everyone in the room see the example above. The master may change as people leave the room senderID - the id of the last person to send out data lastJoinID - the id of the last person to join (not you) lastLeaveID - the id of the last person to leave (not you) history - the history text for your room at the time of application start size - how many other people are in the room (not including you) EVENTS ready - socket is connected and a room has been assigned (receives room data) roomchange - this socket joined another room (receives room data) error - trouble connecting - make sure server is running and you have the right port data - dispatched when someone in the room makes a change (receives other's data) otherjoin - dispatched when another person joins (receives other's data) otherleave - dispatched when another person leaves (receives other's data) time - event from requestTime method with event object having masterTime and currentTime properties synch - event from requestSync method with event object has all the data from the server disconnect - the socket is closed - could be that socketIO stops for some reason - all data on the server will be lost CLOSE ▲PAGE ▤CODE ▤VIDS

CLOSE ▲

Cam(width, height, flip, facingMode, config)

Cam zim class - extends a zim.Container which extends a createjs.Container ** MUST import zim_cam - see https://zimjs.com/es6.html#MODULES DESCRIPTION Shows the output from the Webcam after user permits access. Will stretch to fit in dimensions and can choose to flip (default) or not. Used by ZIM CamMotion, CamCursor, CamAlpha and CamControls classes SEE: https://zimjs.com/nft/bubbling/cam.html and use right arrow to see all four examples SEE: https://www.youtube.com/watch?v=z_jn6wkX6Ec SEE: https://www.youtube.com/watch?v=0vwJ3aodU4U SEE: https://www.youtube.com/watch?v=ceLuEBkEn4o NOTE on a Mac, the canvas must be interacted with before showing cam video recommend using the ZIM CamAsk() widget to do solve this. NOTE noMouse() has been set on Cam - to make the cam mouseEnabled set mouse() on the Cam object; NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// on a PC - this is all that is needed
const cam = new Cam().scaleTo().center(); // will fill the stage with a Webcam

EXAMPLE

// on a Mac, the canvas must be interacted with first
// so would recommend always using CamAsk first:
const ask = new CamAsk().show(yes=>{
   // if the user answers yes to the CamAsk
   if (yes) {
      // use scaleTo() to FILL the cam in the Frame
      // new Cam() will trigger the Browser asking for permission
      // unless already have given permission in this session
      let cam = new Cam().scaleTo().center();      
      cam.on("ready", ()=>{
         // code here
      });            
      // if the user does not accept the browser asking about cam
      cam.on("error", ()=>{
         new Pane("CAM not accepted",yellow).show();
      });      
   } else { // answered no to CamAsk dialog
      new Pane("CAM not accepted",yellow).show();
   }   
});

EXAMPLE

// keyOut a web cam - see https://zimjs.com/zim/camkey.html
// for two colors keyed out - see https://zimjs.com/zim/camkey2.html
// Apple still makes us interact with the canvas before showing video (sigh)
// so use CamAsk widget that has a callback on show() which is true for yes and false for no
const ask = new CamAsk().show(yes => {

   // if the user answers yes to the CamAsk
   if (yes) {
      // set the facingMode to "environment" for back cam (or set to "user" for front cam) if available
      // this is for mobile probably and would be ignored on desktop
      const cam = new Cam({facingMode:"environment"}).scaleTo().center();
      cam.on("ready", ()=>{
         const picker = new ColorPicker({
            tolerancePicker:true,
            spectrumOk:false,
            spectrumClose:false,
            dropperTarget:cam,
            collapsed:true
         }).show().pos(100,100,RIGHT).change(() => {
            cam.keyOut(picker.selectedColor, picker.selectedTolerance);
         });
         // keying will pause the cam so start with picker collapsed
         const label = new Label("Expand to pick color to keyout",20,null,light).pos(20,0,LEFT,CENTER,picker.bar);
         picker.on("expanded", ()=>{
            label.removeFrom();
            S.update();
         });
      });
   }
});

PARAMETERS ** supports DUO - parameters or single object with properties below width - (default 640) width of cam output - see also resetSize() height - (default 480) height of cam output flip - (default true) set to false to not horizontally flip the video facingMode - (default true) set to "user", "exact_user", "environment", "exact_environment", "auto" will try and set cameras on mobile to front or back - ignored on PC warning, the exact versions might cause an error on PC also see setFacingMode() method to change dynamically config - an optional configuration object {} with properties for media settings - such as: width, height, facingMode, aspectRatio, autoGainControl, brightness, channelCount, colorTemperature, contrast, deviceId, echoCancellation, exposureCompensation, exposureMode, exposureTime, facingMode, focusDistance, focusMode, frameRate, groupId, iso, latency, noiseSuppression, pan, pointsOfInterest, resizeMode, sampleRate, sampleSize, saturation, sharpness, tilt, torch, whiteBalanceMode, zoom see: https://developer.mozilla.org/en-US/docs/Web/API/Media_Streams_API/Constraints METHODS ** these methods are available only once the WebCam "ready" event has happened. resetSize() - adjusts the size of the WebCam to the actual WebCam size pause(state) - state defaults to true to pause cam or pass false to unpause cam also see toggle() method and paused property toggle() - swap the paused state - also see pause() method and paused property flip(state) - state defaults to true to mirror the cam or pass false to not mirror the cam also see flipped property snapshot() - make a Bitmap of the current webcam frame keyOut(color, tolerance, replacement) - remove color from Cam's bitmap and a tolerance between 0-1 the default color is "#389b26" which is a medium dark green the default tolerance is .1 - the higher the tolerance the less sensitive the keying process - so more colors will be removed similar to the provided color color and tolerance can be an array of colors and tolerances (or just one tolerance if all are the same) replacement (default clear) a color to replace the keyed out color with or an optional array to match the colors array if an array is used setFacingMode(mode) - set to "user", "exact_user", "environment", "exact_environment", "auto" to choose camera on mobile see facingMode parameter for more info dispose() - close the cam and remove events ALSO ZIM 4TH adds all the methods listed under Container (see above), such as: drag(), hitTestRect(), animate(), sca(), reg(), mov(), center(), centerReg(), addTo(), removeFrom(), loop(), outline(), place(), pos(), alp(), rot(), setMask(), etc. ALSO see the CreateJS Easel Docs for Container methods, such as: on(), off(), getBounds(), setBounds(), cache(), uncache(), updateCache(), dispatchEvent(), addChild(), removeChild(), addChildAt(), getChildAt(), contains(), removeAllChildren(), etc. PROPERTIES type - name of class as a string ready - read only if the ready event has happened ** these properties are available only once the WebCam "ready" event has happened tag - reference to the HTML video tag (created by ZIM to hold the cam video) display - reference to the ZIM Container that holds the bitmap of the video this is what is cached and has its cacheCanvas analyzed for motion bitmap - reference to the ZIM Bitmap that displays the video on the canvas when flipped this is scaled -1 in x and reg moved to be flipped inside the display paused - get or set whether the cam is paused (also see pause() and toggle()) flipped - get or set whether the cam is mirrored (also see flip()) facingMode - get which camera is being used - "user", "environment", etc. might be undefined see facingMode parameter and setFacingMode() method for more details ALSO see ZIM Container for properties such as: width, height, widthOnly, heightOnly, draggable, level, depth, group blendMode, hue, saturation, brightness, contrast, etc. ALSO see the CreateJS Easel Docs for Container properties, such as: x, y, rotation, scaleX, scaleY, regX, regY, skewX, skewY, alpha, cursor, shadow, name, mouseChildren, mouseEnabled, parent, numChildren, etc. EVENTS dispatches a "ready" event when the user has accepted webcam usage dispatches an "error" event if access to the WebCam is unsuccessful See the CreateJS Easel Docs for Stage events, such as: mouseenter, mouseleave, stagemousedown, stagemousemove, stagemouseup, drawstart, drawend, etc. and all the Container events such as: click, dblclick, mousedown, mouseout, mouseover, pressdown (ZIM), pressmove, pressup, removed, rollout, rollover CLOSE ▲PAGE ▤CODE ▤

CLOSE ▲

CamMotion(obj, preview, smooth, damp, sensitivity, precision, period, colorFilter, colorSensitivity, mode, visualizerObj, visualizerColor, visualizerBaseColor, visualizerScale, visualizerBaseScale, guideH, guideV, randomize, cam, frame, facingMode, config)

CamMotion zim class - extends a zim.Container which extends a createjs.Container ** MUST import zim_cam - see https://zimjs.com/es6.html#MODULES DESCRIPTION Captures motion data from a ZIM WebCam at a certain object - by default the stage. CamMotion makes a grid of points and checks to see if the color has changed under the points. The location of changed points is stored is a data property and averaged to provide a single cursor location. This location of motion is used by the ZIM CamCursor class. The CamMotion class has adjustable parameters to capture motion in different settings. See the CamControls class for a panel of controls to change the settings. There is also a visualizer which adds circles at the data points with motion. The data points default to be in a randomized grid but can be set to a regular grid. SEE: https://zimjs.com/nft/bubbling/cam.html and use right arrow to see all four examples NOTE noMouse() has been set on CamMotion to make the cam mouseEnabled set mouse() on the CamMotion object and the cam property of the CamMotion object; NOTE see also ZIM CamCursor which has other features - see examples too. A CamCursor is not always needed and is sometimes used as well as CamMotion objects on specific buttons that trigger on any motion. The cursor may just be there to help people know where the motion is heading. NOTE as of ZIM 5.5.0 the zim namespace is no longer required (unless zns is set to true before running zim) EXAMPLE

// on a Mac, the canvas must be interacted with first
// so would recommend always using CamAsk first:
const ask = new CamAsk().show(yes=>{   
   if (yes) {
      // a CamMotion with visualizer
      // CamMotion will make a Cam and FILL the screen with the cam
      // for instance, if the Frame was a square and the webcam a 4x3 aspect ratio
      // then the stage would be filled and the left and right of the cam would be off stage
      const camMotion = new CamMotion({
         visualizerColor:[green,orange,yellow,red,blue,purple,pink],
         visualizerBaseColor:clear,
         visualizerScale:6,
         visualizerBaseScale:1
      }).center();

      // Optionally adjust the circles
      // A custom visualizer can also be easily made
      // by looping through the CamMotion data points
      camMotion.on("ready", ()=>{
         camMotion.visualizer.loop(circle=>{circle.ble("color-dodge")})
      });
   }
}); // end CamAsk show() - see CamAsk docs for error checking example

EXAMPLE

const ask = new CamAsk().show(yes=>{   
   if (yes) {
      // capture any motion over a button (or a press)
      // and change frame color for 1 second
      const button = new Button(null,null,"HOLD").pos(200,200).tap(activate);
      const camMotion = new CamMotion(button);
      camMotion.on("active", activate);
      function activate() {
         F.color = yellow;
         if (button.resetID) button.resetID.clear();
         button.resetID = timeout(.5, ()=>{
            F.color = darker;
         });
      }
   }
});

EXAMPLE

// hold on object to pick up then
// drag object and hold to drop
// dedicated to Elisha!
const ask = new CamAsk().show(yes=>{

   let holding = false;
   const circle = new Circle(100,red)
      .pos(100, 100, LEFT, CENTER);

   // if the user answers yes to the CamAsk
   if (yes) {
      const camCursor = new CamCursor();
      camCursor.on("ready", ()=>{
         circle.top().ord(-1); // under cursor above cam
         new CamAlpha(camCursor).pos(50,50,RIGHT,TOP);

         let moveEvent;
         camCursor.on("still", ()=>{
            if (!holding && camCursor.hitTestCircles(circle)) {
               holding = true;
               circle.sha();
               circle.diffX = camCursor.x-circle.x;
               circle.diffY = camCursor.y-circle.y;

               moveEvent = camCursor.on("cursor", ()=>{
                  circle.loc(
                     camCursor.x-circle.diffX,
                     camCursor.y-circle.diffY
                  );
               });
            } else if (holding) {
               holding = false;
               circle.sha(-1);
               camCursor.off("cursor", moveEvent)
               circle.addTo().ord(-2);
            }
         });
      });
   }
});